# Litrevu: full text of all published guides > Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. This file contains the complete body text of the guides indexed at https://litrevu.com/llms.txt. Each guide is delimited by a "# " heading followed by its canonical URL. Generated from the published pages at build time. Generated: 2026-11-20 Guides included: 90 of 90 --- # How to Justify Your Research Methodology: Steps and Template URL: https://litrevu.com/blog/how-to-justify-your-research-methodology Category: Writing Sections Published: 2026-11-20 Summary: Justify each method by showing it fits your question, citing studies that used it and rejecting the main alternative. Sample sizes, tables and a template. Writing Sections ## How to Justify Your Research Methodology: Steps and Template By Wasim Ghoor · 20 November 2026 · 11 min read To justify your research methodology, give each choice (design, sample, data collection and analysis) four things: a reason the choice fits your research question, a citation to published work that used or tested the method, the main alternative you rejected and why, and the limitation you accept along with how you reduce it. University guides such as the University of Melbourne’s Academic Skills page and the University of Westminster’s dissertation guide ask for exactly this: show the method suits the question, and compare it with the alternatives. ## What does justifying a research methodology mean? Methodological justification is the argument, made in a methodology chapter or the methods section of a research proposal, that every research choice is the right one for the research question, backed by the literature and weighed against realistic alternatives. A methods description says what you did; a methodology justification says why that was the right thing to do. Think of methods as the floor plan and the justification as the inspector’s report on why each wall can carry its load. The University of Melbourne’s guide on choosing and justifying your methods frames the purpose as “demonstrating that your methods are sound and appropriate for your question”. The University of Westminster’s methodology guide asks students to “state why you think the methods you are using are the most appropriate for the research question(s)/hypothesis(es).” A methodology justification sits in the methodology chapter of a dissertation and, in shorter form, in a research proposal . For the chapter’s full structure, see how to write a methodology section . ## What should a methodology justification include? A methodology justification should cover four tests for every major choice: fit, precedent, alternatives and limits. The table below sets out what each test asks and what evidence answers it. The four tests of a methodology justification, with the university guidance behind each Test Question the examiner asks Evidence that answers it Source of the rule Fit Does this method answer your research question? A sentence linking the method to the aim (“to explore how…” suits interviews; “to measure how much…” suits a survey) University of Melbourne: “Align your methods to your research aim” Precedent Have credible studies used this method for similar questions? Two or three citations to studies that asked a similar question, plus a methods text for the technique University of Westminster: “Include sources and references that support your choice of methods and procedures” Alternatives Why not the obvious other method? One or two realistic alternatives, each rejected with a reason University of Melbourne: “Compare your methods to alternative methods” Limits What could go wrong, and what did you do about it? The limitation stated plainly, with the step taken to reduce it University of Westminster: discuss “the disadvantages or limitations, and how you overcame them” The four tests apply to each of the four big choices in a study: the research design, the sample and its size, the data collection instrument, and the analysis method. For the limits test in more depth, see how to write the limitations of a study . ## How do I use the literature to justify my methods? Use the literature to justify your methods in three ways: precedent (studies on similar questions used the same method), critique (studies show the alternative method has a known weakness) and gap (no study has yet used your method on your population, so the choice adds something). The University of Westminster guide notes that “justification for your research project can stem from your literature review”, for instance when the methodology earlier studies used was problematic. What does that look like in practice? Build a methods table from the studies in your literature review: one row per study, with columns for design, sample, data collection instrument, analysis and any limitation the authors admit. A methods table shows three patterns: - The established method. If most studies asking your kind of question used semi-structured interviews, citing that pattern is precedent. - The criticised method. If several authors list “self-reported survey data” as their limitation, that admission supports a design that avoids self-report. - The untried combination. If no study in the table sampled your population with your method, the methods table is evidence for a methodological gap, which you can then confirm with a wider search. The free literature review matrix gives you a ready grid for a methods table, and the guide to data extraction for a literature review shows how to fill one consistently. Cite the original methods text for each technique too: for thematic analysis, that is usually Braun and Clarke (2006), Using thematic analysis in psychology , Qualitative Research in Psychology , 3(2), 77-101. ## How do I justify a qualitative sample size? Justify a qualitative sample size by citing empirical evidence on saturation and saying what kind of saturation your study needs. The most direct evidence is Hennink and Kaiser’s (2022) systematic review of empirical tests of saturation in Social Science & Medicine (vol. 292, 114523): across 23 articles, studies using empirical data reached saturation within 9 to 17 interviews or 4 to 8 focus group discussions, particularly with relatively homogeneous study populations and narrowly defined objectives. The kind of saturation matters. Hennink, Kaiser and Marconi (2017), Code Saturation Versus Meaning Saturation , Qualitative Health Research , 27(4), 591-608, found in a set of 25 interviews that code saturation (the range of issues) came at nine interviews, while meaning saturation (“a richly textured understanding of issues”) needed 16 to 24. A study that only maps issues can justify a smaller sample than one that must explain them. Sources disagree here, and a methodology justification should say so. Braun and Clarke (2021), To saturate or not to saturate? , Qualitative Research in Sport, Exercise and Health , 13(2), 201-216, argue that data saturation does not fit the assumptions of reflexive thematic analysis, and that sample size cannot be fixed in full before the analysis begins. This guide follows that split: if you use reflexive thematic analysis, justify sample size through information richness and your analytic aims, citing Braun and Clarke (2021); for other qualitative approaches, cite the 9 to 17 interview range from Hennink and Kaiser (2022) and name the conditions that apply to your study. ## How do I justify a quantitative sample size? Justify a quantitative sample size with an a priori power analysis wherever you are testing a hypothesis: state the expected effect size, the alpha level, the target power and the resulting sample size. Cohen’s (1992) A power primer , Psychological Bulletin , 112(1), 155-159, gives the classic benchmark: to compare two independent group means at α = .05 with power of .80, you need 64 participants per group for a medium effect (d = .50), 393 per group for a small effect (d = .20) and 26 per group for a large effect (d = .80). Is power analysis the only acceptable justification? No. Lakens (2022), Sample Size Justification , Collabra: Psychology , 8(1), 33267, sets out six approaches: collecting data from (almost) the entire population, resource constraints, an a priori power analysis, a desired accuracy, heuristics, and explicitly acknowledging that no justification exists. A heuristic is a rule of thumb, so a quantitative methodology justification that relies on one should name where the rule comes from and why the rule fits the design. The six sample size justifications in Lakens (2022), and what a student reports for each Approach (Lakens, 2022) When a student can use it What to report Entire population The population is small and finite (every school in one district) The population size and how many you reached Resource constraints Time, money or access set the ceiling, common in a master’s project The constraint, and what effect size the sample can still detect Accuracy The aim is to estimate a value (a prevalence, a mean) The confidence interval width you aimed for A priori power analysis The aim is to test a hypothesis Effect size and its source, alpha, power, resulting n Heuristics A field norm exists The norm, its source and why it fits your design No justification None of the above applies A plain statement, so readers can judge the result ## How do I justify not choosing another method? Justify not choosing another method by naming one or two alternatives a reasonable examiner would expect, and giving one concrete reason each was a worse fit for your research question. The University of Melbourne guide asks students to “compare your methods to alternative methods” and “demonstrate that your choice best suits your investigation.” Name only realistic alternatives. A study exploring nurses’ experiences of night shifts might reject a survey (it would count experiences without explaining them) and focus groups (night-shift staff are hard to gather at one time, and the topic may be sensitive in front of colleagues). Each rejection is strongest when a published study supports it, for example a study whose authors list the same weakness as their own limitation. ## Should I justify my research paradigm? Justify your research paradigm when your discipline expects one; ask your supervisor or check recent dissertations from your department if you are unsure. The University of Melbourne guide advises students to “clarify your stance or paradigm as a researcher if relevant to your discipline” and to say whether you are an observer, an experimenter or an involved agent. A paradigm justification is short: name the paradigm (for example interpretivist or post-positivist), state in one sentence what that paradigm assumes about knowledge, and show the chain from paradigm to design to method. If your department publishes a methodology chapter template, follow its order. ## What does a methodology justification paragraph look like? A methodology justification paragraph opens with the choice, links the choice to the research question, cites precedent, rejects the main alternative and closes with the accepted limit. The template below is a format illustration with placeholder citations, not a real study. Format illustration (placeholders, not real sources): This study uses semi-structured interviews because the research question asks how [population] experience [phenomenon], which calls for participants’ own accounts rather than predefined categories. Semi-structured interviews have been used for similar questions with [comparable population] (Author, Year; Author, Year). A survey was considered and rejected because [reason linked to the question], a weakness that (Author, Year) report as a limitation of their own survey design. Interviews limit generalisability, so the study reports [mitigation, such as purposive sampling across sites] and does not claim the findings represent all [population]. Swap the bracketed parts for your study and for sources you have opened and read yourself. For how the design connects to the ideas it rests on, see how to write a theoretical framework . ## How do I justify my methodology with an AI assistant for writing backed by sources? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. For a methodology justification, the precedent and critique evidence comes from the studies already in your literature review. The workflow on your own papers: - Add the studies from your literature review. Upload the PDFs, paste DOI or arXiv links, or let Litrevu find open-access papers on your topic and pick the ones that fit. - Ask how they designed their studies. Ask questions such as “Which studies used semi-structured interviews, and what reasons do they give?” or “Which authors list self-reported data as a limitation?” Answers cite only your papers, and Litrevu says when your papers do not cover the question. - Open each citation. Every citation opens the passage highlighted on the page of the PDF, so you can read the authors’ own reasoning before you cite it. - Compare the studies side by side. Line the studies up in a cited table by design, sample, instrument and analysis. The comparison table works as a methods table with the passage behind each cell. - Check your justification paragraph. Paste the paragraph you wrote. Each claim comes back Supported, Partly supported, Contradicted or Not in your papers. You still decide which design fits your question and you write the justification. A “Not in your papers” result means your library does not cover that claim; the result is a cue to read more widely, not proof that no study exists. ## Frequently asked questions ## How long should a methodology justification be? A methodology justification has no fixed length. Each major choice (design, sample, data collection, analysis) usually needs one paragraph covering fit, precedent, the rejected alternative and the limit, and a research proposal compresses each choice to a sentence or two. ## How many references do I need to justify my methods? Aim for one methods text per technique (for example Braun and Clarke, 2006, for thematic analysis) and two or three studies that used the method on a similar question. No general rule sets a number; the test is whether every justified choice points to evidence. ## How do I justify a small sample size in a dissertation? Justify a small qualitative sample by citing empirical saturation evidence, such as the 9 to 17 interview range Hennink and Kaiser (2022) found for relatively homogeneous populations and narrow objectives. Justify a small quantitative sample with Lakens’s (2022) resource-constraints approach: state the constraint and report what effect size the sample can still detect. In both cases, state the limit on what the findings can claim. ## What is the difference between methodology and methods? Methods are the specific tools and procedures a study uses, such as interviews, a survey or regression analysis. Methodology is the reasoning behind those tools: why this design, this sample and this analysis suit the research question. A methodology chapter needs both, and the justification is the methodology part. ## Do I justify my methodology differently in a research proposal? A research proposal justifies planned choices in the future tense (“this study will use…”), while a dissertation justifies completed choices in the past tense. The four tests stay the same: fit, precedent, alternatives and limits. A proposal is usually shorter, so each choice gets one or two sentences with a citation rather than a full paragraph. ## Can I use AI to help justify my research methodology? University AI policies differ, so check your own university’s policy before using any AI tool on a methodology chapter. Using an AI assistant to find which of your papers used a method, and to check your own paragraph against those papers, is reading and checking work; the design decisions and the written justification stay yours. Declare how you used the tool, and the free AI disclosure statement generator gives you wording to start from. ## Where do I start with my own papers? Start by putting the studies from your literature review side by side by design, sample, instrument and analysis, because the precedent, critique and gap evidence for a methodology justification sit in those studies. With Litrevu you can add those papers, compare them in a cited table and check your justification paragraph against them. Try it on your papers . Free to start, no credit card required. ## Related Guides - How to Write a Methodology Section (Complete Guide with Examples) - How to Write a Research Proposal: 7 Sections + Template - How to Write Limitations of a Study: Examples by Method - How to Write a Theoretical Framework: 5 Steps + Example --- # Research Proposal Example: Annotated Master's and PhD Sample URL: https://litrevu.com/blog/research-proposal-example Category: Writing Sections Published: 2026-11-18 Summary: A research proposal example shows what each section says and how long it runs. See an annotated master's and PhD sample, word counts and real examples. Writing Sections ## Research Proposal Example: Annotated Master's and PhD Sample By Jessica McLaren · 18 November 2026 · 12 min read A research proposal example is a filled-in proposal that shows what each section says, in what order, and roughly how long it runs. The annotated sample below uses the structure most UK PhD and master’s applications ask for (title, introduction, literature review, aims and research questions, methodology, timeline, references), and a full proposal built on it runs about 2,000 to 3,000 words, the range the University of Warwick’s Department of Sociology gives for a PhD proposal ( Warwick Sociology ). Research proposal example, defined: a complete sample proposal for a study that has not happened yet, read to see how the problem, the gap in earlier research, the research questions and the method connect. Your own proposal keeps the moves and replaces every word. The sample here is an illustration written for this guide. Every citation is a placeholder in the form (Author, Year) and it contains no findings or numbers, because a sample with invented studies teaches you to cite things that do not exist. The sections of the annotated example, with the lengths the University of Warwick’s Sociology PhD guide gives Section What the section does in the example Typical length (Warwick Sociology PhD guide) Title Names the topic, the population and the setting No length given Introduction States the problem and why it matters About 200 to 300 words Literature review Shows what is known, where studies disagree and what is missing About 500 to 600 words Aims and research questions Turns the gap into questions the study can answer 400 to 500 words Methodology Explains how each question will be answered 500 to 600 words Conclusion Restates the contribution About 200 words Timeline Shows the project fits the degree No length given References Lists every source cited Not counted Warwick calls its 2,000 to 3,000 word total “only a guideline”. These are one UK department’s figures, not a universal rule, so check your own department’s page first. ## What does a research proposal title and introduction look like? A research proposal title names the topic, the people or cases studied, and the setting. The introduction states the problem in its first two sentences and says why it matters before giving any background. Example (illustration, placeholder citations): Title: Peer mentoring and first-year persistence among distance-learning students in South Africa Introduction: First-year students at distance-learning universities study without daily contact with classmates, and many do not continue into their second year (Author, Year). Peer mentoring is widely offered as a response, yet most evaluations of peer mentoring come from campus-based universities in the United States and the United Kingdom (Author, Year; Author, Year). This study asks whether, and how, peer mentoring supports first-year persistence when students and mentors never share a campus. Sentence one of the example introduction states the problem and who it affects. Sentence two names the usual solution and the limit of the evidence for it. Sentence three says what the study will do. Steal this pattern: problem, current response, limit of the evidence, what you will do. ## What does the literature review section of a research proposal example include? The literature review in a research proposal groups earlier studies by what they found, shows where those studies disagree or stop, and ends on the gap the proposed study will fill. The University of Sheffield’s Department of Politics and International Relations puts it plainly: “Literature reviews are not simply descriptive mapping exercises at PhD level” ( Sheffield SPIR ). Example (illustration, placeholder citations): Studies of peer mentoring at campus universities report that mentored students are more likely to continue their studies (Author, Year; Author, Year). These studies propose a social mechanism: mentoring builds belonging through regular face-to-face contact (Author, Year). Two strands of research complicate that account. Evaluations of online mentoring report weaker or mixed effects (Author, Year), and studies of distance learners suggest practical help with study routines matters more to them than belonging (Author, Year). None of the studies reviewed here followed distance-learning students in South Africa, and none compared the social and practical functions of mentoring in the same group. The example literature review opens on the main finding, names the mechanism the proposed study will test, sets two strands of research against each other, and closes on a two-part gap: an unstudied population and an untested comparison. “None of the studies reviewed here” is a claim about your reading, so the review must show enough reading to carry it. See the literature review for a research proposal guide and research gap vs research problem . ## What do aims and research questions look like in a research proposal example? Aims and research questions follow directly from the gap: each research question answers one part of the gap, and the aim states what the whole study will achieve. In the example, a two-part gap produces one aim and three questions. Example (illustration): Aim: To explain how peer mentoring relates to first-year persistence among distance-learning students in South Africa. Research questions: - How do first-year distance-learning students describe what their peer mentors do for them? - Which functions of peer mentoring (social, practical or both) do students link to their decision to continue? - How do mentors’ and students’ accounts of mentoring differ? In the example, question 2 tests the untested comparison in the gap (social versus practical functions of peer mentoring); questions 1 and 3 supply the description and a second perspective. All three use an open “how” or “which”, which suits a qualitative method. A “does X increase Y” question would commit the study to measurement and a comparison group. The research aims and objectives guide covers wording. ## What does the methodology section of a research proposal example cover? The methodology section of a research proposal explains the approach, the participants or sources, data collection and analysis, and ethics, in enough detail for a reader to judge that each research question can be answered. The University of Sussex Faculty of Social Sciences asks applicants to justify methodological choices, say specifically how participants or data will be accessed, and give a realistic timeline ( Sussex ). Example (illustration): The study will use semi-structured interviews, because the research questions ask how students and mentors understand mentoring rather than how much it changes outcomes. Participants will be first-year students from one distance-learning university’s peer mentoring programme, and their mentors, recruited through the programme’s coordinators once ethics approval is granted. Interviews will be analysed with reflexive thematic analysis (Author, Year), coding students’ accounts against the social and practical functions identified in the literature review. Participants will give informed consent, may withdraw at any point, and will be identified only by pseudonyms. The example methodology justifies the design from the wording of the research questions, says who participants are and how they will be reached, names a method of analysis linked to the literature review, and covers ethics in one sentence. It gives no sample size; if your department expects one, state it with a reason and a methods source. ## What does a research proposal timeline look like? A research proposal timeline breaks the project into periods and shows each stage fitting inside the degree. Sheffield’s politics guide asks for a timetable covering three years, or three and a half on some scholarship routes ( Sheffield SPIR ); the Sussex Faculty of Media, Arts and Humanities asks for 6-month periods ( Sussex ). Example timeline (illustration, three-year full-time PhD) Period Work Months 1 to 6 Extend the literature review; ethics application; agree access Months 7 to 12 Pilot interviews; revise the interview guide; begin recruitment Months 13 to 24 Interviews; transcription; first round of analysis Months 25 to 30 Complete analysis; draft findings chapters Months 31 to 36 Discussion and conclusion; revisions; submission A master’s timeline uses the same logic in months or weeks. ## How long is a research proposal at different universities? Research proposal length is set by the department, and UK departments ask for anything from about 500 words to about 4,000. Each figure below is from the department’s own page, read in November 2026. Published research proposal lengths, by department, as of November 2026 University and department Level Proposal length University of Warwick, Sociology PhD Around 2,000 to 3,000 words King’s College London, European and International Studies PhD 2,000 to 3,000 words, plus bibliography University of Sheffield, Politics and International Relations PhD About 1,500 to 2,000 words University of Sussex, Faculty of Social Sciences PhD 3,000 words, not including references University of Sussex, Faculty of Science, Engineering and Medicine PhD 1,000 to 2,000 words University of York, Computer Science Research degree About 500 to 1,000 words University of York, Business and Society Management PhD Around 4,000 words MIT, Electrical Engineering and Computer Science (CommLab) SM or MEng thesis About 8 to 12 pages MIT, Electrical Engineering and Computer Science (CommLab) PhD thesis About 10 to 20 pages USC Libraries research guide General (US) 10 to 35 pages, plus references Sources: Warwick , KCL , Sheffield , Sussex , York , MIT CommLab , USC Libraries . The free dissertation word limits tool collects more university figures. ## How is a master’s research proposal example different from a PhD one? A master’s research proposal is usually shorter and narrower than a PhD proposal, with fewer research questions, a smaller literature review and a timeline in weeks or months. MIT’s CommLab guide gives about 8 to 12 pages for an SM or MEng thesis proposal and 10 to 20 pages for a PhD proposal ( MIT CommLab ). The bigger difference is the claim. A PhD proposal argues for an original contribution: Sheffield’s politics guide says the question “will need to be something that has not been posed before” ( Sheffield SPIR ). A master’s proposal needs a real gap and a project that fits the time allowed. To scale a PhD proposal on peer mentoring down to a master’s, keep the one research question that compares the social and practical functions of mentoring, fold the descriptive questions into it, and recruit from one cohort. ## What does a research proposal look like in the US, UK and South Africa? A research proposal in the US is usually a thesis or dissertation proposal measured in pages and approved by a committee; in the UK it is usually part of a PhD application and measured in words; in South Africa each faculty or department sets the length and sections. United States. A master’s proposal is usually called a “thesis proposal” and a PhD proposal a “dissertation proposal”, approved by a committee; MIT’s CommLab calls it “a contract between you and your thesis committee” ( MIT CommLab ). US proposals are measured in pages. United Kingdom. A UK PhD proposal is usually part of the application and measured in words. The University of York warns: “You won’t be able to edit your proposal after you’ve submitted your application” ( York ). South Africa. Length and sections are set by each faculty or department. Stellenbosch University’s Faculty of Arts and Social Sciences says word counts “may vary from department to department” and requires, at a minimum, a working title, background and rationale, problem statement and research questions, theoretical points of departure, research design and methods, provisional chapter layout and timeframe, budget, and ethical considerations ( Stellenbosch FASS, 2025 ). A Stellenbosch master’s proposal therefore needs a budget and a chapter layout, which many UK application proposals do not ask for. ## Where can I find real research proposal examples from universities? Some universities and methods textbook publishers publish real research proposal examples, worth reading next to an annotated sample. Each source below was checked on its own page in November 2026. Published research proposal examples, as of November 2026 Source What it offers York St John University Four example research proposals (Word files) on its research degrees pages SAGE, Creswell’s Research Design resources Three sample proposals: quantitative master’s (Hayes, 2007), mixed methods doctoral (Ivankova, 2002), qualitative doctoral (Morales, 2006) MIT CommLab Two annotated MEng thesis proposals Oxford Learning Link Four example proposals with different methodologies, from How to do your Social Research Project or Dissertation Edith Cowan University A suggested proposal format with notes per heading (a template, not a student’s proposal) Read a published example for its moves, never its wording. Copying its sentences is plagiarism, and several University of York departments state that the proposal “must be in English and be your own words”. ## How do I build my proposal’s gap paragraph with an AI assistant for writing backed by sources? An AI assistant for writing backed by sources helps you build a proposal’s gap paragraph from papers you have already gathered: you ask where they agree and where they stop, then check your draft gap statement against them before your supervisor reads it. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. For a gap paragraph on peer mentoring for distance-learning students, the Litrevu workflow on your own papers looks like this: - Add your papers. Upload PDFs, paste DOI or arXiv links, or let Litrevu find open-access papers on your topic and pick the ones that fit. - Ask where the evidence stops. Ask “Which populations and settings do these studies cover?” Answers cite only your papers, and Litrevu says when your papers do not cover a question. - Open the citations. Each citation opens on its highlighted passage in the PDF, with title, authors and year. - Compare the studies. Line them up side by side in a cited table (setting, population, method, finding) to see where they agree and differ. For the peer mentoring example, this is where a split between campus and online studies would show up. - Check your gap statement. Paste your paragraph; each claim comes back Supported, Partly supported, Contradicted or Not in your papers. Format illustration (not real output) Claim from your draft Result “Most evaluations of peer mentoring come from campus-based universities (Author, Year).” Supported “None of the studies reviewed here followed distance-learning students in South Africa.” Not in your papers “Not in your papers” means your library holds no study covering the claim, not that none exists. For a gap statement it is a cue to search wider, never proof of a gap. You decide which gap is worth a project and you write the proposal; Litrevu finds, lines up and checks the evidence in your papers. Some universities limit AI use on proposals: the University of Sussex Business School says “AI may only be used in an assistive role in preparing your proposal” ( Sussex ). Check your university’s policy and declare your use with the free AI disclosure statement generator . The guide to using AI for a research proposal covers where the line sits. ## Frequently asked questions ## Can I copy a research proposal example? No. You can copy the structure of a research proposal example, but not its wording, topic framing or citations. Copying a published proposal’s sentences is plagiarism, and several University of York departments state that the proposal must be in your own words. ## What are the parts of a research proposal example? A research proposal example usually has seven parts: title, introduction, literature review, aims and research questions, methodology, timeline and references. Some universities add more; Stellenbosch University’s Faculty of Arts and Social Sciences also requires a budget, a provisional chapter layout and ethical considerations. ## How long should a PhD research proposal be? A UK PhD research proposal is usually 1,500 to 3,000 words. The University of Warwick’s Sociology department and King’s College London’s European and International Studies department both give 2,000 to 3,000 words, while the University of Sheffield’s politics department gives about 1,500 to 2,000. ## How long is a master’s research proposal? A master’s research proposal is usually shorter than a PhD proposal, but the department sets the length. MIT’s CommLab guide gives about 8 to 12 pages for an SM or MEng thesis proposal, and Stellenbosch University’s Faculty of Arts and Social Sciences says word counts vary from department to department. ## Where can I find a research proposal example PDF? Real research proposal examples are published by York St John University (four examples), SAGE’s resources for Creswell’s Research Design (three sample proposals), MIT CommLab (two annotated MEng proposals) and Oxford Learning Link (four examples). Download them from the publishers’ own pages, not from file-sharing mirrors. ## Should a research proposal be written in the future tense? Yes, for the parts that describe your study. A research proposal describes work that has not happened yet, so the aims, methodology and timeline use “will”, while the literature review uses the past or present tense to report what earlier studies found. ## What should I do after reading a research proposal example? After reading a research proposal example, map its moves onto your own project: write your problem in one sentence, group the studies you have read by what they found, and state your gap in a sentence you can check against them. The step-by-step research proposal guide covers each section, and the research rationale guide covers the paragraph that argues why the study matters. If you already have a folder of papers, you can line them up, see where they stop and check your gap statement against them in Litrevu. Add your papers and ask your first question . Free to start, no credit card required. ## Related Guides - How to Write a Research Proposal: 7 Sections + Template - How to Find a Research Gap: Steps, Types and Examples - How to Write a Literature Review for a Research Proposal (2026 Guide) - Literature Review Example: Annotated Sample You Can Follow --- # How Many References in a Research Proposal? University Rules URL: https://litrevu.com/blog/how-many-references-in-a-research-proposal Category: Getting Started Published: 2026-11-16 Summary: Where universities set a number, a research proposal needs 10 to 20 references. See the rules from Wits, York and BITS Pilani, by level and country. Getting Started ## How Many References in a Research Proposal? University Rules By Wasim Ghoor · 16 November 2026 · 12 min read Most research proposals need 10 to 20 references: that is the range universities give when they state a number at all, from the University of York’s Health Sciences department (“up to 10”) to the Wits Faculty of Health Sciences (“between ten to twenty”) and BITS Pilani (“minimum 12 to 20”). Most universities set no number, and instead ask you to list only the works your proposal actually cites, so your department’s handbook overrides any general figure, including this one. ## What counts as a reference in a research proposal? A reference in a research proposal is a full entry in the list at the end of the proposal for a source you cite in the text. A bibliography is wider: it can also list sources you consulted, or plan to read, without citing them. Most universities ask for a reference list; a few, such as the University of Glasgow School of Education and the University of York’s Law School, ask for an “indicative bibliography” instead. ## How many references do universities ask for in a research proposal? Universities that state a number ask for 10 to 20 references, and most universities state no number at all. Where a university gives no number, the rule is almost always “cite only what you use”, which makes the count a consequence of the argument rather than a target. The table below sets out published rules, as of November 2026. Published reference guidance for research proposals, by institution, as of November 2026 Institution (country) Level Reference guidance Proposal length University of York, Health Sciences (UK) Research degree application “Up to 10 relevant references” About 500 to 1,000 words Wits Faculty of Health Sciences (South Africa) MSc and PhD “Between ten to twenty references will suffice” for the background section No more than 10 pages (MSc) or 15 pages (PhD) BITS Pilani (India) PhD “Minimum 12 to 20 references”, 50 to 60% from journals About 10 to 12 pages University of Reading, Psychology and Clinical Language Sciences (UK) PhD or MPhil application No number; only texts “central to your proposed work” 500 to 700 words, excluding references University of Glasgow, School of Education (UK) PhD and MPhil No number; an indicative bibliography of sources consulted About 3,000 words, excluding references University of Johannesburg, FEBE (South Africa) Master’s No number; “comprehensive references” About 3,000 words; no longer than about 20 pages including references UKZN Graduate School of Business and Leadership (South Africa) Master’s No number; all works cited, about 2 pages single-spaced 3,000 to 3,500 words, excluding references University of Connecticut, Educational Psychology (US) Doctoral dissertation proposal No number; “limited to those cited in the proposal” 12 to 25 pages, excluding references Two of the numbered rules are old documents: the BITS Pilani guidelines date from July 2012 and the Wits guidance carries a 2009 mark. They are still the clearest published figures we found, and they agree with each other. Sources: York , Wits FHS , BITS Pilani , Reading , Glasgow , UJ FEBE , UKZN GSBL , UConn EPSY . The numbered rules share a pattern. York’s figure of “up to 10” goes with a proposal of 500 to 1,000 words, while BITS Pilani’s minimum of 12 to 20 goes with a 10 to 12 page proposal containing a 1,500 to 2,000 word literature review. The number of references follows the length of the proposal, and above all the length of its literature review. ## How many references does a master’s research proposal need? A master’s research proposal typically needs 10 to 20 references where a figure is given: the Wits Faculty of Health Sciences sets that range for MSc proposals of up to 10 pages. Most master’s guides, including the University of Johannesburg’s FEBE guidelines and UKZN’s Graduate School of Business and Leadership format, set no count at all and ask for every cited work to be listed in full. The UKZN format still gives a clue: it budgets about 1,000 words for the literature review and about 2 pages, single-spaced, for the reference list. The UJ FEBE guide asks that the literature review be “accompanied by comprehensive references” and that “no document you refer to is missing in the final list of references, nor vice versa”. Taken together, a master’s proposal is judged on whether the key works in the field are present and correctly matched, not on a total. ## How many references does a PhD research proposal need? A PhD research proposal does not necessarily need more references than a master’s proposal; it needs the references that carry a longer argument. Wits gives the same 10 to 20 range for the background section at MSc and PhD level, while allowing the PhD proposal 15 pages instead of 10. BITS Pilani in India asks for a minimum of 12 to 20 references in a PhD proposal and wants 50 to 60% of them to be journal articles. PhD application proposals in the UK are often short. York’s Health Sciences department asks for 500 to 1,000 words with up to 10 references, and Reading’s School of Psychology and Clinical Language Sciences asks for 500 to 700 words and warns against “a bibliography listing everything written on the subject”. A short UK PhD application proposal with 40 references would read as padding, because 700 words cannot discuss 40 sources. ## How many references does the finished thesis need, compared with the proposal? The finished thesis needs several times more references than the proposal, because the proposal only has to show that the student knows the core of the field. A guide to dissertations by Mark A. Baron at the University of South Dakota says the reference list of a completed dissertation “commonly contains between 60 and 100 entries”, which describes typical practice rather than a rule. Against the 10 to 20 references that proposal guides name, the proposal carries the foundation and the thesis carries the full review. Think of the proposal reference list as a sketch map of the field and the thesis reference list as the survey. The sketch has to get the main roads right; nobody expects every footpath. Litrevu’s guide on reusing your proposal’s literature review in the thesis covers how the sketch grows into the survey. ## Do references count towards a research proposal’s word limit? References usually do not count towards a research proposal’s word limit, but some departments include them, so check the exact wording. The University of Reading’s School of Psychology and Clinical Language Sciences, the University of Glasgow School of Education and UKZN’s Graduate School of Business and Leadership all exclude references. The University of York’s Social Policy and Social Work department and its English department both include them. Whether references count towards the proposal’s length, in each department’s own words Department (country) Do references count? Exact wording York, Social Policy and Social Work (UK) Yes “between 2,000 and 3,000 words (including references)” York, English and Related Literature (UK) Yes “not to exceed 1,500 words including referencing” York, Law (UK) No “Indicative bibliography (does not count towards the word limit proposed above)” Reading, Psychology and Clinical Language Sciences (UK) No “500-700 words in length (excluding references)” Glasgow, School of Education (UK) No “± 3,000 words, not including references” UJ, FEBE (South Africa) Yes, for the page cap “no longer than about 20 pages (including appendices and references)” If your limit includes references, every entry in the list costs you words that the argument could have used. Under a cap such as York English’s 1,500 words including referencing, that is a reason to cite fewer, better-chosen sources. ## Should a research proposal have a reference list or a bibliography? A research proposal should have a reference list unless the guidance asks for a bibliography by name. The University of York’s Linguistics PhD guidance says “Don’t list other works which may be relevant”, and the University of Connecticut’s Educational Psychology guidance limits references to “those cited in the proposal”. The University of Glasgow School of Education goes the other way and asks for “an indicative bibliography of sources that you have consulted for this research project to date”. A reference list of 15 entries means 15 sources the reader can find in the text; an indicative bibliography of 30 entries can honestly include 15 papers you have read but not yet cited. When guidance says only “references”, Wits’s rule is the safe default: “All references in the reference list must be cited in the text and vice versa.” ## How recent should the references in a research proposal be? The references in a research proposal should mostly be recent, with a few older foundational works where the field depends on them. BITS Pilani’s doctoral guidelines give a concrete threshold: in a proposal written in 2012, 70% of the articles should be published after 2007, roughly the previous five years. Most universities do not set a percentage; see Litrevu’s guide to how recent sources need to be for how to defend an older citation. The same BITS Pilani guidance wants 50 to 60% of references from “reputed journal articles”. A proposal that leans on textbooks, websites or other students’ theses tells the reader that the student has not yet reached the current research. ## How do I work out the right number of references for my proposal? Work out the right number of references by starting from your literature review’s word budget, not from a target count. BITS Pilani’s own figures (12 to 20 references for a 1,500 to 2,000 word literature review) work out, by our arithmetic, at roughly one reference for every 75 to 170 words of review. Use that as a sense check, then apply these steps: - Find your department’s rule. Look in the programme handbook or the proposal template for a number, a word or page limit, and whether references count towards it. - List the claims your proposal makes. Each claim about what is known, what is contested or what is missing needs at least one source behind it. - Cover the field’s core. Include the seminal studies your supervisor would expect to see, and the most recent studies that shape your gap. A literature map shows quickly whether a cluster is missing. - Group studies instead of listing them. “Three cohort studies found... (Author, Year; Author, Year; Author, Year)” does more work than three separate summaries. - Cut what you do not use. If a source appears in your list but not your argument, it belongs in your reading notes, not your reference list. Reading far more papers than you cite is normal: Litrevu’s guide to reading research papers quickly for a proposal assumes a library of 100 papers, while York, Wits and BITS Pilani name figures between 10 and 20 references for a proposal. ## Can a research proposal have too many references? A research proposal can have too many references when the list grows faster than the argument. The University of Reading’s School of Psychology and Clinical Language Sciences tells applicants to “only reference texts that you think are central to your proposed work” and warns against “a bibliography listing everything written on the subject”. A long list attached to a short proposal suggests citations were collected rather than read. Too few references is the opposite failure. A literature review section with two or three citations cannot show where studies agree, where they conflict and what they leave out, which is what a research gap has to rest on. ## How do I check that every claim in my proposal is backed by a source? You can check every claim in your proposal against the papers you have read by adding those papers to Litrevu and pasting in your draft. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The workflow for a proposal’s reference list, using only your own papers: - Add the papers you have read. Upload PDFs, paste a PDF link, a DOI or an arXiv link, or pick open-access papers that Litrevu finds on your topic. - Ask which papers carry each claim. For example: “Which of these papers report outcomes for part-time students?” Litrevu answers with citations only from your papers and says when your papers do not cover the question. - Compare candidates side by side. When five papers could support one sentence, a cited comparison table shows where they agree and differ, so you can choose the two or three that carry the point best. - Check your draft paragraph. Paste a paragraph of your literature review and each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. - Open every citation. Each citation opens the highlighted passage in the source PDF. Litrevu checks that a citation points to a passage in your papers, not that the passage fully supports your sentence, so read it before you keep the claim. - Match your department’s style. Switch between APA, MLA, Chicago, IEEE, Harvard and Vancouver, and export references as BibTeX or RIS. A format illustration of a claim check (placeholder, not real output): Claim: “Earlier studies of this intervention reported mixed results (Author, Year; Author, Year).” Partly supported. One cited paper reports a positive effect; the other reports no effect for the subgroup your sentence covers. [Open passage] “Not in your papers” means your library does not cover the claim. It is a signal to find a source or cut the claim, never proof that the literature has a gap. You still decide which sources to cite and you write every sentence of the proposal. ## Before you submit: how do I check the reference list itself? Check the reference list by matching it against the text both ways, then confirming each entry is real and current. Wits and UJ FEBE both require that every reference is cited in the text and every citation appears in the list. Litrevu’s free in-text citation checker matches the two, and the reference checker looks up whether each entry exists. ## Frequently asked questions about references in a research proposal ## How many references should a master’s research proposal have? A master’s research proposal typically has 10 to 20 references where a university gives a figure, such as the Wits Faculty of Health Sciences for MSc proposals. Most master’s guides, including the University of Johannesburg’s FEBE guidelines, set no number and ask for every cited work to be listed. Your programme handbook overrides any general figure. ## How many references should a PhD proposal have? A PhD proposal usually has 10 to 20 references where a figure is stated: BITS Pilani in India asks for a minimum of 12 to 20, and Wits asks for 10 to 20 in the background section. Short UK PhD application proposals often need fewer; the University of York’s Health Sciences department allows up to 10 for a 500 to 1,000 word proposal. ## Are references included in the word count of a research proposal? References are usually excluded from a research proposal’s word count, as at the University of Reading, the University of Glasgow School of Education and UKZN’s Graduate School of Business and Leadership. Some departments include them: the University of York’s English department caps proposals at 1,500 words “including referencing”. Check the exact wording in your guidance. ## Can I have too many references in a research proposal? Yes, a research proposal can have too many references when the list is longer than the argument can use. The University of Reading tells PhD and MPhil applicants to reference only texts “central to your proposed work”. A 700-word proposal with 40 references suggests the sources were collected, not read. ## How old can references in a research proposal be? Most references in a research proposal should be recent, with older seminal works kept where the field depends on them. BITS Pilani’s doctoral guidelines say that in a proposal written in 2012, 70% of articles should be published after 2007, roughly the previous five years. Most universities set no percentage, so follow your supervisor’s expectations for your field. ## What is the difference between references and a bibliography in a proposal? A reference list in a proposal contains only the sources cited in the text, while a bibliography can also include sources consulted but not cited. Most universities want a reference list; the University of Glasgow School of Education and the University of York’s Law School ask for an indicative bibliography. Use a reference list unless your guidance names a bibliography. ## Build your reference list from the papers you have read The right number of references is the number your argument uses, inside whatever your department sets. If you already have a folder of PDFs for your proposal, add them to Litrevu, check each claim in your draft against them, and keep the references that carry the argument. Start with your own papers . Free to start, no credit card required. ## Related Guides - How to Write a Research Proposal: 7 Sections + Template - How to Write a Literature Review for a Research Proposal (2026 Guide) - Research Gap vs Research Problem: Differences in One Table - How to Use AI for a Research Proposal, Section by Section --- # Does Using AI Make You a Worse Researcher? What Studies Say URL: https://litrevu.com/blog/does-ai-make-you-a-worse-researcher Category: AI & Research Writing Published: 2026-11-15 Summary: Not by itself. Studies tie AI to weaker recall and critical thinking when it does the thinking for you. What the MIT study found, its limits, safe habits. AI & Research Writing ## Does Using AI Make You a Worse Researcher? What Studies Say By Samuel de Bruyn · 15 November 2026 · 10 min read Using AI does not automatically make you a worse researcher, but the evidence so far says it does when the tool does the thinking for you. In MIT Media Lab’s 2025 “Your Brain on ChatGPT” preprint, 83.3% of the ChatGPT group (15 of 18) could not correctly quote the essay they had just written, and in a field experiment published in PNAS in 2025, students who practised maths with unrestricted GPT-4 scored 17% lower than students who never had access once the tool was taken away. The same studies point to the fix. Students who used a version of GPT-4 built to give hints instead of answers avoided most of that drop, and MIT participants who wrote on their own first and only then used ChatGPT showed higher memory recall in the fourth session. The line that matters is not “AI or no AI”. It is whether you still do the reading, the judging and the writing. What is cognitive debt? Cognitive debt is the term the MIT Media Lab team used for the cost that builds up when you hand a thinking task to an AI assistant: the task gets done, but you remember less of it, feel less ownership of it, and engage less of your own reasoning in doing it. The researchers measured it in a 20-minute essay task, not in long-term research skills. ## What do the main studies on AI and thinking skills actually show? Four studies get cited most often in the “is AI making students worse?” debate, and they measure different things. Only one is a field experiment on learning; the others are a small lab study with EEG and two surveys. Four studies on AI and thinking skills, with what each one measured Study Who took part Design Main finding Main caveat Kosmyna et al., “Your Brain on ChatGPT” (MIT Media Lab, arXiv preprint, June 2025) 54 people aged 18 to 39 from five Boston-area universities Three groups (ChatGPT, search engine, no tools) wrote essays over four sessions while EEG recorded brain activity 83.3% of the ChatGPT group (15 of 18) could not correctly quote their own essay in session 1, against 11.1% (2 of 18) in each of the other groups Preprint, small sample from one area, one model (GPT-4o), one task Bastani et al., “Generative AI without guardrails can harm learning” (PNAS, vol. 122, 2025) Nearly a thousand high school maths students Field experiment: unrestricted GPT-4 (“GPT Base”), a hint-giving tutor version (“GPT Tutor”), or no access Practice grades rose 48% with GPT Base and 127% with GPT Tutor; once access was removed, GPT Base students scored 17% lower than students who never had it, while GPT Tutor largely avoided the drop School maths, not postgraduate research Lee et al., “The Impact of Generative AI on Critical Thinking” (Microsoft Research, CHI 2025) 319 knowledge workers, 936 real examples Survey of self-reported critical thinking Higher confidence in GenAI went with less critical thinking; higher self-confidence went with more Self-reported, correlational Gerlich, “AI Tools in Society” (Societies, vol. 15, January 2025) 666 UK participants, plus 50 interviews Survey and interviews Frequent AI tool use correlated with lower critical thinking scores (r = -0.68), with cognitive offloading as the mediator Correlational, so it cannot show that AI caused the lower scores Read together, the four studies agree on one pattern: the risk sits in offloading the thinking, not in using the tool. None of them tested postgraduate students doing a literature review or a thesis, so any claim that AI “damages researchers” goes further than the evidence. ## What did the MIT “Your Brain on ChatGPT” study find? The MIT Media Lab study found that people writing essays with ChatGPT showed the weakest brain connectivity of three groups, remembered their own essays worst, and felt the least ownership of them. Brain connectivity “systematically scaled down with the amount of external support”, in the authors’ words: strongest with no tools, moderate with a search engine, weakest with ChatGPT. The design is worth knowing before you quote the MIT study. Nataliya Kosmyna, Pattie Maes and colleagues split 54 participants (mean age 22.9) from MIT, Wellesley, Harvard, Tufts and Northeastern into three groups of 18. Each person wrote SAT-style essays in 20 minutes per session, across three sessions over four months. The ChatGPT group used OpenAI’s GPT-4o as its only source. The most useful finding for researchers is in the fourth session, which 18 participants completed. People who had used ChatGPT and then wrote without it showed weaker alpha and beta connectivity. People who had written without tools and then used ChatGPT showed higher memory recall. The MIT results suggest the order matters: thinking first and bringing AI in second looked better than starting with AI. ## What are the limits of the MIT cognitive debt study? The MIT cognitive debt study is a preprint, and the authors themselves call the findings preliminary. The project page still describes the paper as a preprint (as of November 2026), and the authors ask readers to treat the conclusions “with caution”. The authors list the limits plainly on the MIT Media Lab project page: a small group of participants from one geographic area, only ChatGPT tested, only essay writing, and an essay task that was not split into stages such as idea generation and writing. The MIT team also asks journalists not to describe the study with words like “brain rot”, “dumb” or “damage”, because the paper uses none of them. So the MIT study supports a narrow claim: writing a short essay with ChatGPT, from the first word, led to weaker recall and ownership of that essay. The MIT study does not show that AI use causes lasting harm, and the MIT study says nothing about reading papers, searching databases or checking citations. ## Does AI make students worse at learning, or only at the task? The strongest evidence on learning comes from Bastani and colleagues’ PNAS field experiment, and the answer depends on how the AI tool was set up. Students with unrestricted GPT-4 did far better during practice (48% higher grades) and then worse on their own (17% lower than students who never had access). Students whose GPT-4 was prompted to act as a tutor did even better in practice (127% higher) and largely avoided the later drop. The PNAS authors describe the unrestricted group as using GPT-4 as a “crutch”. For a research student, the crutch is accepting an AI tool’s account of what your papers conclude; the tutor version is asking where a claim is made, then reading that passage. The Microsoft Research survey adds a second point. Lee and colleagues found that generative AI shifts critical thinking toward “information verification, response integration, and task stewardship”. In plain terms, the job changes from producing answers to checking them, and people who trust the AI more check less. A research student who uses AI and stops verifying is the case the Microsoft survey describes. ## Which research tasks can you hand to AI, and which should stay with you? Universities that publish thesis-level AI rules mostly agree on where the line sits: spelling and grammar help is fine, search and reading support is a grey area that usually needs your department’s permission and a declaration, and AI-written text or AI-made analysis in the submitted thesis is not allowed. The rules differ by country and by faculty, so the table below names each one. Thesis-level AI rules at three universities, task by task Task University of Bristol (UK, research degrees) UCT Faculty of Commerce (South Africa, dissertations, Dec 2025) University of Melbourne (Australia, graduate research) Spelling and grammar checks Allowed Always allowed Allowed (grammar, clarity and spelling) Search terms and reading plans Not addressed on the thesis page Allowed with disclosure, if the department authorises it Not addressed on the thesis page AI summaries of sources Not as thesis text Summary labels as starting points, with disclosure; AI summaries or citations pasted into the dissertation are not allowed Not as thesis text Drafting or redrafting thesis text Not allowed: AI may not write any text used in the thesis Not allowed for sections that add claims or synthesis Not allowed: no initial drafting or substantial redrafting Data analysis Code help allowed for non-examined technical parts, with acknowledgement Exploratory summaries with disclosure, if authorised; outsourcing analysis or interpretation is not allowed Not addressed on the thesis page Declaring use Acknowledge translation, code and diagram help Declare all AI use in front matter and keep a record of prompts and outputs Acknowledge use and keep a record of tools, dates, prompts and outputs In Canada, the University of Toronto’s School of Graduate Studies requires prior approval from the supervisor and supervisory committee for any generative AI use in a doctoral thesis, and expects the student to be able to describe and defend any use of generative AI at the final oral exam. Toronto’s School of Graduate Studies does not regulate master’s theses, so master’s students there follow their own department. For a stage-by-stage view across more universities, including US graduate schools, see Can I Use AI for My Dissertation? What’s Allowed by Stage . ## How do you use AI for research without losing your skills? To use AI for research without losing your skills, keep three jobs for yourself: deciding what the papers say, judging whether they are any good, and writing the argument. Hand AI the work of finding, sorting and checking, and verify every answer against the source. That is the pattern the MIT and PNAS results favour, and it is the line Bristol, UCT and Melbourne draw in their rules. Six habits make the line concrete for a thesis or a literature review. - Think first, then ask. Write down what you expect a paper or a set of papers to show before you ask an AI tool anything. In the MIT study, participants who wrote on their own for three sessions before switching to ChatGPT showed higher memory recall. - Ask for locations, not conclusions. “Where do these papers report sample sizes?” keeps you reading. “What do these papers conclude?” invites the crutch effect the PNAS authors saw. - Open every passage you cite. If you have not read the sentence a citation points to, you do not know whether it supports your claim. This also catches invented references, which the University of Toronto names as a known AI risk. - Write your own prose. Bristol and Melbourne both rule out AI-written thesis text, and UCT Commerce rules out AI drafting of any section that adds claims or synthesis. - Run the viva test. For each paper you cite, could you explain its method and its main limitation to an examiner without notes? If not, read it again. - Keep a log as you go. UCT Commerce and Melbourne both require a record of prompts and outputs, and a log makes your declaration easy to write. The AI disclosure statement generator turns that record into a declaration in your university’s format. ## How do I use an AI assistant for writing backed by sources without handing over the thinking? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The Litrevu workflow keeps the same split between finding and thinking: Litrevu finds and checks the evidence, and the student reads, judges and writes. You add your own papers as PDFs, PDF links, DOI or arXiv links, or pasted text, or pick open-access papers Litrevu finds on your topic. You ask questions of those papers, and every answer cites only them; when your papers do not cover a question, Litrevu says so. You open any citation to see the highlighted passage on the page of the PDF, and you read it. You line up studies side by side in a cited table to see where they agree and differ. Then you paste a paragraph you wrote, and each claim comes back labelled Supported, Partly supported, Contradicted or Not in your papers. Here is the shape of a claim check, shown as a format illustration with placeholder sources rather than a real output: Your sentence: “Most studies of the intervention report a positive effect on retention.” Supported (Author, Year): passage on page X, highlighted. Contradicted (Author, Year): passage on page Y reports no effect. Not in your papers: no paper in your library measures retention at follow-up. You still decide what that result means. “Not in your papers” means your library does not cover the claim, not that the literature has a gap; it is a cue to search wider. The reading, the judgement and the sentence stay yours, which is the point of using Litrevu this way. ## Frequently asked questions ## Does ChatGPT cause brain rot? No study has shown that ChatGPT causes “brain rot”, and the MIT Media Lab authors ask readers not to use that phrase about their work. The MIT study measured brain connectivity, recall and ownership during a 20-minute essay task. It found weaker engagement with ChatGPT, not lasting damage. ## Was the MIT cognitive debt study peer reviewed? The MIT “Your Brain on ChatGPT” study was posted on arXiv as a preprint in June 2025 and revised in December 2025. The MIT Media Lab project page still describes it as a preprint (as of November 2026), and the authors call the findings preliminary. ## Does using AI hurt critical thinking in students? Survey studies link heavy AI use with lower critical thinking, but they cannot show cause. Gerlich’s 2025 study of 666 UK participants found a correlation of r = -0.68 between frequent AI tool use and critical thinking scores, and younger participants aged 17 to 25 relied on AI tools most. ## How do I use AI without losing my research skills? Use AI to find, sort and check evidence, and keep the reading, judging and writing for yourself. Form your own view of a paper before asking an AI tool about it, open every passage you cite, and write your own prose. Bastani and colleagues’ 2025 PNAS study found that a hint-giving GPT-4 tutor largely avoided the learning loss that unrestricted GPT-4 caused. ## Is it cheating to use AI for a thesis or dissertation? Using AI for a thesis is not cheating where your university allows the specific use and you declare it, and it is misconduct where your university forbids it. The University of Bristol allows spelling and grammar checks but forbids AI-written thesis text. UCT’s Faculty of Commerce treats undeclared or inappropriate AI use in a dissertation as academic or research misconduct. ## Do I have to declare AI use if I only used it to read papers? Many universities require you to declare any AI use, including reading support. UCT’s Faculty of Commerce requires a front-matter disclosure of all AI use in a dissertation, and the University of Melbourne requires graduate researchers to acknowledge AI use and keep a record of it. Check your own faculty’s rules, because some set stricter conditions than the university. ## Where should you start? Start by deciding which jobs stay yours: the reading, the judgement and the writing. Then check your faculty’s AI rules and keep a log of anything you hand to a tool. If you want an assistant that sends you back to the exact passage in your own papers instead of replacing the reading, try Litrevu with your own papers . Free to start, no credit card required. ## Related Guides - Can I Use AI for My Dissertation? What's Allowed by Stage - The Ethics of AI in Research Writing: What Universities Should Expect From an AI Research Assistant (2026) - How to Write an AI Declaration Statement (With Examples) - How to Read Research Papers Quickly for a Research Proposal --- # Research Gap vs Research Problem: Differences in One Table URL: https://litrevu.com/blog/research-gap-vs-research-problem Category: Getting Started Published: 2026-11-11 Summary: A research problem is the issue your study addresses and why it matters; a research gap is what published studies have not yet answered. Table, examples. Getting Started ## Research Gap vs Research Problem: Differences in One Table By Wasim Ghoor · 11 November 2026 · 10 min read A research problem is the issue, concern or contradiction your study takes on, and the reason that issue matters. A research gap is the specific thing the published studies have not yet answered about that problem: the problem justifies your study, and the gap shows that your study is new. Definition. A research problem is “a general issue, concern, or controversy addressed in research” ( Ellis and Levy, 2008 , p. 22). A research gap is a topic or area where missing or insufficient information stops researchers from reaching a conclusion on a question ( Robinson, Saldanha and McKoy, 2011 ). ## What is the difference between a research gap and a research problem? The research problem answers “why does this study matter?”, and the research gap answers “what do the existing studies not yet tell us?”. A research problem can exist outside the literature, in a clinic, a classroom or a policy, while a research gap only exists in relation to what has been published. A proposal needs both, and the table below sets the two side by side with the research question and the topic. Research topic, research problem, research gap and research question compared Aspect Research topic Research problem Research gap Research question What it is The general domain of the study An issue, concern or controversy that needs addressing What published studies leave unanswered about that issue The question your study will answer Question it answers What area is this in? Why does this study matter? What is not yet known? What exactly will you find out? Where the evidence comes from Your field Practice, policy, data and the literature The literature you have reviewed Your problem and your gap Where it sits in a proposal Title and opening line Problem statement, in the introduction or background End of the literature review, restated in the introduction After the problem and gap, before the method Primary source Ellis and Levy (2008), p. 20 Ellis and Levy (2008), p. 22; USC Libraries Robinson et al. (2011); Swales’s CARS model Ellis and Levy (2008), p. 20 ## What is a research problem? A research problem is an issue, concern or controversy that your study sets out to address. Ellis and Levy (2008) , writing in Informing Science , say a problem exists when the current state of affairs differs from the ideal and there is no acceptable solution available (p. 22). USC Libraries’ research guide describes a research problem as “a definite, clear expression [statement] about an area of concern, a condition to be improved upon, a difficulty to be eliminated, or a troubling question that exists in scholarly literature, in theory, or within existing practice”. The USC guide adds that a research problem “does not state how to do something”, and that a good problem statement anchors the research questions or hypotheses that follow. National University’s problem statement guide (US) is stricter about where a research problem comes from. National University asks for “a specific, evidence-based, real-life issue” that is “well-documented by recent research findings and/or statistics from credible sources”, and notes that a real-life problem “exists regardless of whether research is conducted or not”. ## What is a research gap? A research gap is a question that the existing studies cannot yet answer. The US Agency for Healthcare Research and Quality report by Robinson, Saldanha and McKoy (2011, AHRQ Publication No. 11-EHC043-EF; summary by NCCMT ) describes a gap as a topic or area for which missing or insufficient information limits the ability to reach a conclusion for a question. Robinson’s framework, as presented at the 2013 Cochrane Colloquium , opens from the point that “Research gaps prevent systematic reviewers from making conclusions”, and sorts the reasons a research gap exists into four: insufficient or imprecise information, biased information, inconsistent or unknown consistency results, and not the right information. A research gap is always relative to a body of literature. In John Swales’s CARS model of research introductions ( Genre Analysis , 1990), “indicating a gap” is one way of “establishing a niche”, alongside counter-claiming, question-raising and continuing a tradition, as the UMass Amherst Writing Center summarises the model. The gap phrases it gives as examples are “less attention has been paid to...” and “these studies have failed to recognize the...”. For the eight gap types and a step-by-step method for finding a research gap, see How to Find a Research Gap: Steps, Types and Examples . ## Is a lack of research a research problem? A lack of research is not, on its own, a research problem in most proposal guidance: a lack of research is a research gap. National University’s guide states that “‘lack of knowledge’ or ‘lack of research’ cannot be used as the problem for a doctoral project or dissertation-in-practice”, and treats such a statement as an academic issue or a gap. Ellis and Levy (2008) make a similar point: “A missed opportunity does not necessarily constitute a problem” (p. 22). The sources do not fully agree. Ellis and Levy accept that a research problem can sit in the literature itself, for example when there is no solution documented in the literature or when earlier studies produced “mixed results or contradictions” (p. 22). USC Libraries also allows “a troubling question that exists in scholarly literature”. This guide follows the stricter line, because it works under both readings: state the research problem as an issue that matters (in practice or in theory), then state the research gap as what the studies have not answered about that issue. If your department’s handbook defines the research problem differently, the handbook wins. ## How are the research problem, research gap and research question connected? The research problem, research gap and research question form a chain: the research problem says why the study matters, the research gap says what is missing from the literature on that problem, and the research question asks for the missing piece. Ellis and Levy (2008) describe a two-way relationship in which the research problem “delimits the possible goals for a study”, and the research questions then narrow that goal into the specific questions the study will answer (p. 20). Think of the research problem as a leaking roof and the research gap as the part of the roof nobody has inspected yet. The leak is why anyone cares; the uninspected section is why your inspection is new; the research question is “what is happening in that section?”. A proposal that names only the uninspected section, with no leak, leaves the reader asking why anyone should look. Gap-spotting is the most common route from literature to research question, but not the only one. Sandberg and Alvesson (2011) , in Organization 18(1), examined 52 articles in organisation studies and found that spotting gaps in the literature was the most common way of constructing research questions across paradigms. Sandberg and Alvesson argue that challenging the assumptions behind existing studies, which they call problematization, tends to produce more interesting theory than filling a gap. ## What do a research problem and a research gap look like in a proposal? A research problem paragraph names the issue, its impact and the evidence for both; a research gap paragraph names what the existing studies have and have not examined. The pair below is a format illustration only: the topic is invented and “(Author, Year)” marks where real citations go. Format illustration (not real studies). Research problem: Many first-year students at distance-learning universities leave before their second year, and the cost falls on the students and on the institutions (Author, Year; Author, Year). Research gap: Studies of first-year withdrawal have focused on campus-based students (Author, Year; Author, Year), and less attention has been paid to students who study entirely online while working full-time. Research question: What reasons do working, fully online first-year students give for leaving before their second year? Ellis and Levy (2008) offer a short template for the research problem side (Figure 4, p. 28): in no more than two sentences each, state what the problem is, describe the impact of the problem, and identify the conceptual basis for the problem, supporting each part with three current, peer-reviewed references. National University asks for a problem statement of 250 to 300 words in three paragraphs. ## Where do the research problem and research gap go in a research proposal? The research problem goes in the problem statement near the start of the proposal, inside the introduction or background section. The research gap is argued at the end of the literature review and named again in the introduction, just before the research questions. Department rules vary: the University of York’s research proposal guidance for Law, for example, asks PhD applicants to identify “the major issue, problem, or gap in knowledge which forms the background to your proposal”. Where the problem and the gap sit in a research proposal Proposal section What the section does with the problem and the gap Introduction or background States the research problem and its impact Problem statement States the research problem in 250 to 300 words (National University) Literature review Shows what studies have found and builds the case for the research gap Research questions Turns the research gap into questions the study will answer Significance or rationale Explains who benefits once the gap is filled To log what each study found before you argue the gap, the free tool Make a literature review matrix from your own PDFs gives one row per study and one column per question. For the full section order and a template, see How to Write a Research Proposal: 7 Sections + Template ; for the review that carries the gap, see How to Write a Literature Review for a Research Proposal , and for seeing the whole field first, How to Create a Literature Map for a Research Proposal . ## How do different countries name the research problem and research gap? Universities in different countries use different labels for the same two ideas, so match your own handbook’s words. Three published examples: - United States: National University and USC Libraries both use “problem statement” for the research problem, and National University keeps the research gap separate from the research problem in doctoral work. - United Kingdom: The University of York’s departmental guidance mostly asks for research questions, how the project contributes to the existing literature, and (in Law) “the major issue, problem, or gap in knowledge”. - Philippines: Philippine thesis manuals such as Emilio Aguinaldo College Cavite’s 2023 manual place a “Statement of the Problem” in Chapter 1, with a review of related literature (RRL). The EAC manual says “the central research problem is broken down into a few well-phrased research questions” (p. 32), and asks the RRL to sort the literature “into what is and what is not known” (p. 24), which is where the research gap comes from. ## How do I separate the research gap from the research problem with an AI assistant for writing backed by sources? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Here is a workflow for the problem-and-gap stage, using the papers you have already collected for your proposal: - Add the papers behind your proposal. Upload PDFs, or add a PDF link, a DOI, an arXiv link or pasted text. Litrevu can also search for open-access papers on your topic, and you pick which ones to add. - Ask Litrevu for the research problem evidence. Ask “What impact of this issue do my papers report?” Every answer cites only your papers, and Litrevu says when your papers do not cover the question, which tells you where your problem statement still needs a source. - Compare the papers in a table to see the research gap. Ask for a side-by-side table of population, setting, method and main finding. Rows where findings conflict, and populations or settings no paper covers, are candidate research gaps. - Open each citation before you rely on the citation. Each citation opens the highlighted passage on the source PDF page, so you can confirm what the study actually says. - Check your problem and gap paragraphs. Paste a paragraph you wrote and each claim comes back Supported, Partly supported, Contradicted or Not in your papers. You decide which candidate gap is real and worth a study, and you write the problem statement and gap statement yourself. A claim marked “Not in your papers” means your library does not cover the claim, not that the gap exists in the wider literature, so search further before you call a gap a gap. For the same approach across every proposal section, see How to Use AI for a Research Proposal, Section by Section . ## Frequently asked questions about research gaps and research problems ## Is a research gap the same as a research problem? No. A research problem is the issue your study addresses and the reason the issue matters, while a research gap is what published studies have not yet answered about that issue. A proposal needs both: the research problem justifies the study and the research gap shows the study is new. ## Can a research gap be the research problem? Some guidance allows it and some does not. Ellis and Levy (2008) accept a problem rooted in the literature, such as contradictory results, while National University says “lack of research” cannot be the problem for a doctoral project. The safe approach is to state an issue that matters, then the gap, and to follow your own handbook. ## What comes first, the research problem or the research gap? In the written proposal, the research problem usually comes first, then the research gap, then the research questions. In practice, students often notice a gap while reading and then work back to the problem that makes the gap worth filling. ## How long should a problem statement be in a research proposal? National University in the US asks for a problem statement of 250 to 300 words in three paragraphs. Ellis and Levy’s (2008) template uses no more than two sentences each for the what, the impact and the conceptual basis of the problem. Check your own department’s limit first. ## What is the “statement of the problem” in a Philippine thesis? In Philippine thesis manuals such as Emilio Aguinaldo College Cavite’s, the Statement of the Problem is a Chapter 1 section that states the central research problem and breaks the problem into specific research questions. The college’s 2023 manual describes the central problem being “broken down into a few well-phrased research questions”. The research gap comes from the review of related literature (RRL). ## What should you do next with your proposal’s problem and gap? Write one sentence for your research problem and one for your research gap, then check that a reader could tell the two apart. If you want to see which of your claims your papers actually support, add those papers to Litrevu and paste the two sentences into the claim check. Start with your own papers . Free to start, no credit card required. ## Related Guides - How to Find a Research Gap: Steps, Types and Examples - How to Write a Problem Statement for a Research Paper (With Examples) - How to Write a Research Question (Step-by-Step, With Examples) - How to Use AI to Find a Research Gap in Your Own Papers --- # How to Write Limitations of a Study: Examples by Method URL: https://litrevu.com/blog/how-to-write-limitations-of-a-study Category: Writing Sections Published: 2026-11-09 Summary: Write the limitations of a study in four parts: the constraint, its effect on your results, an alternative and your mitigation. With examples by method. Writing Sections ## How to Write Limitations of a Study: Examples by Method By Jessica McLaren · 9 November 2026 · 12 min read To write the limitations of a study, name each constraint that affects how far your results can be trusted or generalised, explain what that constraint does to your findings, and say what you did to reduce it. Ross and Bibler Zaidi (2019) give the four parts every limitation needs: describe it, explain its implication, offer an alternative approach, and describe the steps you took to mitigate it. Definition: limitations of a study. The limitations of a study are the constraints on how far its results can be generalised, applied or interpreted, usually arising from the design, the sample, the measures or events during the research. USC Libraries defines them as “the constraints placed on your ability to generalize from the results of your analysis.” What the main reporting guidelines ask a limitations section to cover Study type Reporting guideline and item What the item asks for Randomised trial CONSORT 2025, item 30 Trial limitations: sources of potential bias, imprecision, generalisability and, if relevant, multiplicity of analyses Observational study (cohort, case-control, cross-sectional) STROBE, item 19 Limitations, taking into account sources of potential bias or imprecision, and both the direction and the magnitude of any potential bias Qualitative study SRQR, “Limitations” Problems or gaps in efforts to ensure trustworthiness, how the paradigm, approach and methods affect where the findings apply, and decisions or events that strengthened or weakened rigour Systematic review PRISMA 2020, items 23b and 23c Two separate discussions: limitations of the evidence included in the review, and limitations of the review processes used Any study (student thesis or paper) Ross and Bibler Zaidi (2019) Describe each limitation, explain its implication, give possible alternative approaches, describe steps taken to mitigate it Sources: CONSORT 2025 explanation and elaboration, BMJ 2025;389:e081124 ; STROBE item 19, EQUATOR Network ; SRQR limitations item, EQUATOR Network ; PRISMA 2020 checklist, EQUATOR Network ; Ross and Bibler Zaidi, Perspectives on Medical Education 2019;8:261 to 264 . ## How do you write the limitations of a study, step by step? You write the limitations of a study in four steps for each limitation: describe it, explain its implication, name an alternative approach, and say what you did to reduce it. Ross and Bibler Zaidi (2019) set out exactly these four parts and warn: “Too often, authors only list the potential limitations, without including these other important elements.” - Describe the limitation in specific terms. Say where it came from: the study design, data collection, data analysis or the results (the four stages Ross and Bibler Zaidi sort limitations by). “The sample was small” is vague. “The sample was [number] participants from one [setting]” is specific. - Explain what the limitation does to your findings. Name the threat. Ross and Bibler Zaidi give the model: “self-reported data may lead to inaccuracies (e.g. due to social desirability bias) which threatens internal validity.” For quantitative studies, STROBE item 19 asks for the likely direction and magnitude of any bias, so say whether the limitation probably inflated or shrank your estimate. - Name an alternative approach. Say what design or method would have avoided the limitation, and why you could not use it (time, access, ethics, budget). USC Libraries suggests citing similar studies that faced the same constraint. - Describe what you did to reduce the limitation. A sensitivity analysis, triangulation, a pilot, member checking, a second coder: whatever you actually did. If you did nothing, say what future research should do instead. Steal this template (format illustration, fill in your own details): This study [describe the limitation and where it came from]. This may have [direction of effect] the [finding or estimate], because [mechanism]. A [alternative design or method] would have avoided this, but was not feasible because [reason]. To reduce the effect, we [mitigation step]. Future studies could [recommendation]. ## What are examples of limitations by research method? Examples of limitations differ by research method: surveys are limited by self-report, trials by blinding and generalisability, observational studies by confounding, qualitative studies by transferability, and reviews by the search itself. The table below pairs each method with limitation types drawn from the guidelines and from the USC Libraries list of methodological and researcher limitations. Common limitations by research method, with example wording (format illustrations, not real studies) Method Common limitation types Example wording (fill in your own details) Survey or questionnaire Self-reported data, response rate, sampling frame “Responses were self-reported, so [behaviour] may be over-reported because of social desirability bias, which would inflate [estimate].” Randomised trial Blinding, imprecision, generalisability, multiple analyses “Participants could not be blinded to [intervention], which may have biased self-rated [outcome] in favour of the intervention group.” Observational study Confounding, measurement error, selection bias “[Exposure] was measured once, so misclassification is likely; because this error was probably unrelated to [outcome], it would bias the association towards no effect.” Qualitative interviews Recruitment gaps, researcher position, transferability “We were unable to recruit [group], so the findings may not transfer to [setting], where [reason the group differs].” Systematic or literature review Search limits (databases, language, dates), quality of included studies “The search covered [databases] and English-language studies from [years], so relevant studies in other languages may have been missed.” Case study or single site Access, context-specific findings “Data came from one [organisation], so [finding] reflects its [specific context] and should be tested in [other settings].” USC Libraries lists the usual methodological limitations as sample size, lack of reliable data, lack of prior research, the measure used and self-reported data, and the usual researcher limitations as access, longitudinal effects (the time available), cultural and other bias, and fluency in a language ( USC Libraries, Limitations of the Study ). Ross and Bibler Zaidi (2019) warn that limitations are too often reduced to simplistic themes, and give three examples: “single institution study, use of self-reported data, or small sample size.” Use a stock limitation only if you can say how it changes your own result. ## Where do the limitations go in a research paper or thesis? The limitations usually go in the discussion section of a research paper or thesis, either at the start of the discussion or at the end, just before the recommendations for future research. USC Libraries gives both positions, and says limitations should not be buried in the middle of the discussion unless one is specific to something covered there, in which case it is repeated at the end of the section ( USC Libraries ). Where limitations sit, by document type Document Usual place for limitations Source Journal article (quantitative) Discussion section CONSORT 2025 item 30 and STROBE item 19 both sit under Discussion Journal article (qualitative) Results or Discussion SRQR leaves the placement to authors and editors Systematic review Discussion, as two separate parts (evidence, then review process) PRISMA 2020 items 23b and 23c Thesis or dissertation Discussion chapter, or the conclusion chapter before future research; check your department’s template USC Libraries; local templates vary Research proposal Anticipated limitations, usually beside the methodology Your university’s proposal template A research proposal has no results yet, so it states anticipated limitations and how you plan to reduce them, using the four parts from Ross and Bibler Zaidi (2019). Our guide on how to write a research proposal shows where the methodology section sits in a proposal. ## How long should the limitations section be? None of the main reporting guidelines (CONSORT 2025, STROBE, SRQR, PRISMA 2020) sets a word count for the limitations section. The length follows from how many limitations actually affect your results, with each one described, its implication explained, an alternative named and its mitigation stated. Ross and Bibler Zaidi (2019) put the limit plainly: “Including redundant or irrelevant limitations is an ineffective use of the already limited word count.” USC Libraries gives the same advice from the other side: restrict the section to limitations related to the research problem, and describe each in “detailed but concise terms.” In a thesis, a few limitations that change how a reader should interpret your findings, each in its own short paragraph, do more than ten one-line admissions. To see how many words your discussion chapter has to work with, the free dissertation word count calculator suggests chapter lengths from your total word limit (your handbook or supervisor overrides it). ## Do limitations make your study look weak? No. Stating the limitations of a study shows the reader you understand your own design, and reporting guidelines treat it as a required part of the paper. The SRQR guidance opens: “All research has limitations.” It adds that if you leave them out, editors and peer reviewers may ask about them, which will delay publication ( EQUATOR Network ). The evidence suggests researchers under-report limitations, not over-report them. Ioannidis (2007) examined the first 50 articles published in 2005 in the six most-cited research journals and in two recently launched leading open-access journals, and found that only 67 articles (17%) used at least one word denoting limitations of the work presented, and only five had a separate section on limitations ( Ioannidis, Journal of Clinical Epidemiology 2007 ). A clear limitations section puts your thesis ahead of that baseline, not behind it. What does make a study look weak is apologising. USC Libraries advises: “Do not apologize for not addressing issues that you did not promise to investigate in the introduction of your paper.” ## What mistakes should you avoid in a limitations section? The most common mistakes in a limitations section are listing limitations without explaining their effect, using generic stock phrases, and including limitations that have nothing to do with the research problem. Ross and Bibler Zaidi (2019) name the first two directly: authors “only list the potential limitations” and “use generic descriptions to describe study limitations.” - A list with no implications. “Small sample. Self-report. One site.” tells the reader nothing about your findings. Add the effect of each one. - Generic wording. “This study has some limitations that should be considered” is filler. Name the limitation in the first sentence. - Irrelevant limitations. USC Libraries advises restricting limitations to those related to the research problem. - Apologising for scope you never promised. A boundary you chose on purpose (one country, one age group) is a delimitation. Say why you chose it in your methodology, not as a confession in your discussion. - Limitations that contradict your methodology. Every limitation must match what your methodology section says you did. ## What is the difference between limitations and delimitations? Limitations are constraints you could not avoid that weaken your results; delimitations are boundaries you chose on purpose to keep the study manageable. A limitation belongs in the discussion with its effect on the findings, while a delimitation belongs in the introduction or methodology with your reason for drawing the line there. Limitations vs delimitations Aspect Limitations Delimitations Who decides Imposed by circumstances, design trade-offs or events Chosen by the researcher Example Response rate lower than planned Only final-year students at one faculty were invited Where it goes Discussion (or conclusion chapter) Introduction or methodology (often “scope and delimitations”) What you write The constraint, its effect on results, alternatives, mitigation The boundary and the reason for it USC Libraries’ definition gives the test: a limitation constrains “your ability to generalize from the results of your analysis.” A scoping decision is a delimitation first, and becomes a limitation only if it changes how far your findings apply. ## How do you write limitations from your own papers with an AI assistant for writing backed by sources? You write limitations from your own papers by checking how studies with a similar design admitted and handled the same constraints, then deciding which of those constraints apply to your study. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Here is how a student uses Litrevu at the limitations stage, using only the steps on how it works . - Add the studies closest to your design. Upload the PDFs, or paste a PDF link, DOI or arXiv link, for the studies that used a method like yours. Litrevu can also find open-access papers on your topic for you to pick from. - Ask what limitations those studies admit. Ask, for example, “What limitations do the authors of these studies report, and how did they reduce them?” Each answer is cited only from your papers, and when your papers do not cover a question, Litrevu says so. - Open each citation. Every citation opens to the highlighted passage on the PDF page it came from, so you can read the authors’ own wording before you rely on it. - Compare the studies side by side. Litrevu lines the studies up in a cited table, so you can see which limitation each study names (sample, measure, blinding, setting) and where they agree or differ. The free literature review matrix gives you the same columns to fill in by hand. - Check your own limitations paragraph. Paste your draft and each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. A sentence like “earlier studies also relied on self-reported data” comes back Supported only if one of your papers says so, with the passage to cite. Format illustration (placeholder, not a real output): one row per paper, columns for design, sample and “limitations the authors report”, each cell cited as (Author, Year). You still do the thinking: Litrevu lines up what your papers say, and you decide which limitations apply to your study and how to write them. “Not in your papers” means your library does not cover a claim, not that no study has reported it, so search wider before writing “no previous study has addressed this.” The check confirms a citation points to a passage in your papers, not that the passage fully supports your sentence, so read every cited passage. If you use any AI tool in your thesis, check your university’s policy and declare the use with the free AI disclosure statement generator . ## Frequently asked questions ## What are the limitations of a study? The limitations of a study are the constraints on how far its results can be generalised, applied or interpreted. They usually come from the study design, the sample, the measures used, or events during data collection. USC Libraries defines them as “the constraints placed on your ability to generalize from the results of your analysis.” ## How many limitations should I include in my thesis? No reporting guideline sets a number of limitations. Include every limitation that changes how a reader should interpret your findings, and leave out the rest; Ross and Bibler Zaidi (2019) call redundant or irrelevant limitations “an ineffective use of the already limited word count.” For most theses that means a small number of limitations, each explained in its own paragraph. ## Should limitations go in the discussion or the conclusion? In a journal article, limitations go in the discussion: CONSORT 2025 item 30 and STROBE item 19 both sit under the Discussion heading. In a thesis, limitations go in the discussion chapter or in the conclusion chapter just before recommendations for future research, depending on your department’s template. USC Libraries suggests the start or the end of the discussion. ## How do I write limitations in a research proposal? In a research proposal, write anticipated limitations: the constraints your planned design will carry and how you will reduce them. Use the same four parts Ross and Bibler Zaidi (2019) recommend for a finished study: describe the limitation, explain its likely implication, name an alternative approach, and describe the mitigation you plan. Check your university’s proposal template for where the section goes. ## Is a small sample size a limitation? A small sample size is a limitation only when you explain what it does to your results, for example wider uncertainty around an estimate or too few participants to detect a difference. Ross and Bibler Zaidi (2019) list “small sample size” among the simplistic themes that limitations are too often reduced to. Say how small, why it was small, and how it affects the specific finding. ## Where can I check my limitations against my own papers? You can check your limitations paragraph against your own papers in Litrevu: add the studies closest to your design, compare the limitations their authors report in a cited table, and paste your paragraph to see which claims your papers support. Start with your papers in Litrevu . Free to start, no credit card required. ## Related Guides - How to Write a Discussion Section (Without Repeating Your Results) - How to Compare Your Findings With Previous Studies + Phrases - How to Appraise a Research Paper: CASP Checklist by Design - How to Write a Conclusion for a Research Paper (Template + Examples) --- # How to Create a Literature Map for a Research Proposal URL: https://litrevu.com/blog/how-to-create-a-literature-map Category: Literature Review Published: 2026-11-06 Summary: A literature map groups the studies on your topic into themes and shows where they agree, conflict and stop. Six steps to make one for your proposal. Literature Review ## How to Create a Literature Map for a Research Proposal By Wasim Ghoor · 6 November 2026 · 12 min read A literature map is a diagram of the studies on your topic, grouped into themes, methods or findings, with labelled links that show how the groups relate and where they disagree. To create one for a research proposal, log your core studies in a matrix, cluster the rows into themes, draw the themes with annotated links and conflicts marked, and place your proposed study where the evidence runs out. Literature map (definition): a two-dimensional diagram of the research on a topic, in which the links between concepts are drawn as arrows that can be annotated to say how they relate, with the studies grouped under each concept. MESH Guides attributes the idea to Creswell (2011) and describes the finished map as “a plan for your literature review”. The table below sets out the six kinds of map a postgraduate student is likely to meet, from a sheet of sticky notes to a formal evidence and gap map. Six kinds of map, and what each is built from Type of map What the map shows Built from Best for Source Concept (theme) map Themes from your reading, the authors listed next to each theme, arrows between themes Sticky notes or a drawing tool Planning a proposal’s literature review MESH Guides Hierarchical map The main topic or study at the top, then the themes, sub-themes and methodologies found in the literature A key article and the studies connected to it Literature with many themes, sub-themes and methodologies Leeds Trinity University Library Circular map One circle per theme, method or author A key article and the studies connected to it Seeing the literature one theme, method or author at a time Leeds Trinity University Library Citation map Papers as nodes, joined by citations and references Seed papers in a citation-graph tool Discovering papers you have not found yet Litmaps ; ResearchRabbit Bibliometric map Clusters of journals, authors or terms, from co-citation and similar counts Database exports in software such as VOSviewer Large fields van Eck and Waltman (2010) Systematic map or evidence and gap map Which studies exist for each pair of categories, such as intervention by outcome, and which cells are empty A systematic search, screened and coded A stand-alone mapping project James, Randall and Haddaway (2016) ; White et al. (2020) For most research proposals, the first three are the maps to draw yourself, the citation map helps you find papers, and the last two are research methods in their own right. ## What is a literature map? A literature map is a two-dimensional diagram of the research on a topic, in which the links between concepts are drawn as arrows that can be annotated to define the link. The MESH Guides page on literature maps , written by Eira Patterson for the Education Futures Collaboration, gives that definition and attributes the idea to Creswell (cited there as “Cresswell, 2011”). What does a literature map do that a reading list does not? Think of a reading list as a pile of postcards and a literature map as the street map they were posted from. The MESH Guides page says a literature map helps you “see more clearly how different research studies relate to one another and to group those with similar findings”, and that the finished map “can then be used as a plan for your literature review”. The same page adds one rule worth keeping: “It is important to represent the different views and any conflicting research findings that exist in the literature” (MESH Guides, citing Newby, 2014). A literature map that shows only agreement is a map of one camp, not of the field. ## How do you create a literature map step by step? You create a literature map in six steps: gather the core studies from a key article, log each study in a matrix, cluster the rows into themes, draw the themes, label the links and conflicts, then place your own study on the map. The steps combine the MESH Guides sticky-note method with Leeds Trinity University Library’s advice to start from one key article. ## 1. Gather the core studies from one key article Leeds Trinity University Library’s literature mapping guide starts from one relevant article and follows four connections: the article’s references, other studies by the same authors, the studies that cite the article, and a search on the article’s keywords. Repeat the four connections for each new key article, and stop when the same studies keep coming back. The guide on snowballing and citation chaining covers those searches. ## 2. Log every study in a matrix A literature review matrix holds one row per study and one column per feature: population, setting, method, theory and main finding. The matrix is the raw data for a literature map, because a table puts the same features of every study side by side. The free Literature Review Matrix builds the table from your own PDFs. ## 3. Cluster the rows into themes The MESH Guides method asks you to “identify emerging themes from your reading and write each of these on separate post-it notes to create headings”, stick them on a large sheet, search your sources for each theme’s key terms, and make a list of the authors who refer to each theme next to its heading. Leeds Trinity suggests grouping studies by theme, method, participants or location; pick one grouping for the first draft of the literature map. ## 4. Draw the themes as a hierarchical or circular map Leeds Trinity University Library describes two hand-drawn layouts for a literature map. A hierarchical map puts the main topic or study at the top, and suits literature with many themes, sub-themes and methodologies; a circular map gives each theme, method or author its own circle. Leeds Trinity also suggests keeping a hierarchical map in Excel, with separate tabs for the main study and for the themes, sub-themes and methodologies. ## 5. Label the links and the conflicts The last MESH Guides step is to “move the post-its around and explore how the different themes link together”. On a literature map, write the relationship on every arrow (“extends”, “contradicts”, “same finding, new setting”) and mark conflicting findings clearly. The guide on what to do when two studies contradict each other explains how to treat a conflict as evidence. ## 6. Place your proposed study on the map Add one box for your proposed study, linked to the themes the study builds on and placed where the arrows stop: a population no box covers, a method no cluster uses, or a conflict no study has explained. The guide on how to find a research gap shows how to test that the gap is real before you claim it. ## What should a literature map for a research proposal show? A literature map for a research proposal should show four things: the main themes or camps in the field, the key studies in each, where the findings agree or conflict, and where your proposed study fits. MESH Guides describes the finished map as “a plan for your literature review”, and the four elements line up with a proposal’s sections as follows. Where each element of the map lands in the proposal Element on the literature map Where the element goes in the proposal Themes or camps The subheadings of the literature review Key studies in each theme The studies discussed under each subheading Agreements and conflicts The synthesis paragraphs: what the field knows and where the field disagrees Your proposed study The research gap, the rationale and the research questions The guides on how to write a research proposal and how to write a literature review for a research proposal show where the literature review and the gap sit among a proposal’s sections. ## How is a literature map different from a literature review matrix and a citation map? A literature review matrix records what each study did and found, a citation map shows which papers cite which, and a literature map shows how the ideas in a field relate. Students often treat the three as one thing, but each answers a different question at a different stage of the proposal. Three tools that students often treat as one Feature Literature review matrix Citation map Literature map Question answered What did each study do and find? Which papers are connected by citations? How do the themes relate, and where is the gap? Unit One row per study One node per paper One box per theme or cluster Built from Reading the papers Reference and citation data The matrix, plus your judgement Shows conflicting findings? Yes, in the findings column No: a citation link does not say whether the citing paper agrees Yes, if you draw them Stage of the proposal While reading While searching Before writing the literature review A citation map is like a family tree: a citation map tells you who is related to whom, not whether they get on. Litmaps , for example, builds its maps from seed papers, and ResearchRabbit starts from one paper and expands through related works, authors and topics. ## What is a systematic map or evidence and gap map? A systematic map catalogues the available evidence on a broad topic, usually as a searchable database, and shows where studies cluster and where they are missing, without combining the studies’ results. James, Randall and Haddaway (2016) describe systematic mapping as a method that “collates, describes and catalogues available evidence” and identifies “knowledge gaps (to help direct future primary research)” (Environmental Evidence, 5, 7). An evidence and gap map is the Campbell Collaboration’s matrix version of the same idea. The Campbell guidance by White and colleagues (2020) says that “usually the matrix shows intervention categories as rows and outcomes as columns”, and that evidence and gap maps “usually show what evidence is there, not what the evidence says” (Campbell Systematic Reviews, 16(4), e1125). A systematic map is a research project in its own right, built from a systematic search and a coded database of studies. A literature map in a proposal is a planning diagram drawn from the studies you have read. The guide on scoping, systematic and narrative reviews helps you decide which kind of review your project needs. ## Which tools can you use to make a literature map? The tools for a literature map fall into four groups: sticky notes or a drawing tool for a concept map, citation-graph tools for discovering connected papers, bibliometric software for large fields, and tools that compare what papers say. Each group does a different job, so many students combine a discovery tool with a comparison tool. Tools for a literature map, each described from its own page or paper Tool What the tool does Strongest at Does not Sticky notes, paper or a drawing tool Holds themes, author lists and hand-drawn arrows (the MESH Guides method) Thinking through how themes relate Find papers or check what papers say Litmaps Seed-paper maps and monitoring alerts; imports BibTeX, RIS and PubMed files Finding the papers connected to a seed paper, and automatic updates when new ones appear Line up what the papers found: a citation link shows that one paper cites another, not what it says ResearchRabbit A paper discovery and citation-graph tool: start from one paper and expand through related works, authors and topics, with built-in visualisations of how topics relate Visual citation-graph exploration for finding papers you did not know existed Write or draft anything, or line up what the papers found VOSviewer A “freely available computer program for constructing and viewing bibliometric maps” ( van Eck and Waltman, 2010 ) Co-citation maps of large fields Work without a database export Litrevu Reads the papers you add, answers with a citation to the exact passage, and compares papers side by side in a cited table Seeing what your papers say and where they disagree Draw a citation graph, or match citation-graph tools at discovery If you have not found the key papers yet, start with a citation-graph tool such as ResearchRabbit or Litmaps, because discovery is what those tools are built for. Abertay University Library describes literature mapping tools as tools that “help you explore relationships between academic papers”. Once the papers are in hand, the literature map needs their content: methods, populations and findings. ## How do you map a research field with an AI assistant for writing backed by sources? You map a research field with an AI assistant for writing backed by sources by adding your core papers, asking every paper the same questions, lining the answers up in a cited comparison table, and drawing the literature map yourself from what the table shows. The assistant finds and lines up the evidence; you decide what the clusters and the gap are. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The Litrevu workflow for mapping a field before a research proposal: - Add the papers. Upload PDFs, paste a PDF link, a DOI or an arXiv link, paste a paper’s text, or let Litrevu find open-access papers on your topic. - Ask every paper the same questions. For example: “What population, setting and method did each study use?” and “What was the main finding and the stated limitation?” Litrevu answers with citations only from your papers and says when the papers do not cover a question. - Compare the papers side by side. Ask for a table of population, setting, method and finding, with citations. Before you draw a conflict on the map, open both citations to see each passage highlighted on its PDF page. - Draw the map yourself. Turn the clusters in the table into themes, the disagreements into labelled conflict links, and the blanks into the box for your proposed study. - Check your gap paragraph. Paste the paragraph that describes your gap. Each claim comes back Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your own library does not cover a claim. “Not in your papers” is not proof that a gap exists in the wider literature, so search for the exact gap, newest first, before you claim the gap. The guide on how to use AI to find a research gap in your own papers walks through that check. The comparison table looks like this. The rows are a format illustration with placeholders, not real studies: The shape of a cited comparison table, with placeholders in place of studies Study Population and setting Method Main finding (Author, Year) [population], [country] [cited passage] [design] [cited passage] [finding on X] [cited passage] (Author, Year) [population], [country] [cited passage] [design] [cited passage] [opposite finding on X] [cited passage] (Author, Year) Not in your papers [design] [cited passage] [finding on Y] [cited passage] On the literature map, the first two rows become a conflict link between two themes, and the third row’s missing population becomes a question to search for before it becomes a box. ## What mistakes make a literature map useless? A literature map becomes useless when the map shows authors instead of ideas, leaves out conflicting research, or stops before showing where the proposed study fits. Four mistakes come up most: - Boxes named after authors. An author-named box repeats the reference list. Name each box after a theme, method or finding and list the authors next to it, as the MESH Guides method does. - Only the agreeing studies. MESH Guides warns of the danger of selective referencing, “only including literature that supports your own beliefs and findings”. Draw the conflicting studies too. - A citation graph used as the literature map. A citation link shows that one paper cites another, not whether the citing paper agrees. Use the graph to find papers, then build the literature map from what the papers say. - No box for your own study. A literature map for a proposal exists to show the gap, so add your proposed study and link it to the themes it builds on. ## Frequently asked questions about literature maps ## What is a literature map in research? A literature map is a two-dimensional diagram of the research on a topic, in which the links between concepts are drawn as arrows that can be annotated to say how they relate, with the studies grouped under each concept. MESH Guides attributes the idea to Creswell (2011) and describes the finished map as a plan for the literature review. ## Is a literature map the same as a concept map? A literature map is a concept map whose boxes are groups of studies rather than general ideas. Both use boxes and labelled links; the literature map’s boxes are themes, methods or findings from the research, with the authors listed next to each. ## How many studies should a literature map include? None of the guides consulted for this article (MESH Guides, Leeds Trinity University Library, Abertay University Library) sets a number of studies for a literature map. Include the core studies you will discuss in the literature review, enough for each theme to have its key studies, and add more as your reading grows. ## Do I need to include a literature map in my research proposal? Usually not as a required section: the MESH Guides and Leeds Trinity guides treat the literature map as a planning tool for the literature review. Some supervisors welcome a literature map as a figure, so check your department’s proposal template or ask your supervisor. ## What is the difference between a literature map and a systematic map? A literature map is a planning diagram drawn from the studies you have read. A systematic map is a research method that “collates, describes and catalogues available evidence” from a systematic search and identifies knowledge gaps and clusters (James, Randall and Haddaway, 2016). ## Can AI make a literature map for me? Citation-graph tools such as Litmaps and ResearchRabbit draw maps of which papers cite which, and an AI assistant such as Litrevu can line up what your papers say in a cited comparison table. Deciding the themes, the conflicts and the gap is still your work, so the literature map should reflect your judgement, not a tool’s layout. ## Map the field from your own papers A literature map is only as good as what you know about each study, which means reading the papers, not just their titles and citation links. When your core papers are in one library, Litrevu can line up their populations, methods and findings in a cited table, so you can see the clusters and conflicts and draw the map yourself. Add your papers and compare them side by side . Free to start, no credit card required. ## Related Guides - How to Write a Research Proposal: 7 Sections + Template - How to Find a Research Gap: Steps, Types and Examples - How to Read Research Papers Quickly for a Research Proposal - How to Structure a Literature Review by Theme (With Examples) --- # How to Find Research Papers for Free (and Get the Paywalled Ones Legally) URL: https://litrevu.com/blog/how-to-find-research-papers-for-free Category: Getting Started Published: 2026-11-05 Summary: Find research papers for free in Google Scholar, CORE and open archives, then use the DOI, your library or the author to get paywalled ones legally. Guides ## How to Find Research Papers for Free (and Get the Paywalled Ones Legally) By Jessica McLaren · 5 November 2026 · 8 min read To find research papers for free, search Google Scholar, CORE and open-access archives such as PubMed Central. When a paper sits behind a paywall, do not pay yet. Copy its DOI, search for it in your university library, look for the author’s own copy in a repository, ask for an interlibrary loan, or email the author. Definition: open access. An open-access paper is free for anyone to read online. The Budapest Open Access Initiative defines open access as “free availability on the public internet”. A paywalled paper is one you can read only if you or your library has paid. ## Where can I find research papers for free? You can find free research papers in Google Scholar, in open-access collections and on preprint servers. Start with Google Scholar, then try the collection closest to your subject. To work out what counts as a proper source, see how to find academic sources . This guide starts where you need to read the paper. Where to look for free full text, as of November 2026 Where What you get Watch out for Google Scholar Every subject, with a [PDF] link beside a result when it finds a copy you can read It lists paywalled papers too CORE Open-access papers gathered from repositories and journals It also takes in preprint servers, so check whether a paper was published DOAJ An index of open-access journals from around the world It covers open-access journals only PubMed Central A free full-text archive of biomedical and life sciences journal literature Some papers appear only after an embargo , a delay before the full text is free arXiv and bioRxiv Preprints: arXiv in physics, maths, computer science, economics and related fields, bioRxiv in the life sciences Not peer reviewed, so check whether you can cite a preprint SciELO SA and AJOL SciELO SA holds selected peer-reviewed South African journals, free to read. AJOL indexes journals published in Africa Not all of AJOL is free: 461 of its 985 journals are open access ## How do I find free papers on my topic in one search? To find free papers on your topic in one search, use a tool that checks the links for you, such as Litrevu’s free Research Paper Finder . Type your topic, with no sign-up, and it searches OpenAlex , “a comprehensive index of the world’s research”, for journal articles. It tests each open-access PDF link before listing it. For the papers it cannot fetch, it gives you the DOI, ready for the steps below. It never downloads a paywalled paper. It does not find everything. It shows at most 15 papers in each list, and only journal articles that OpenAlex holds, so books and theses will not appear. A paper can land on the list of papers to get yourself even when it is free to read, because some publishers block automatic downloads, and it does not fetch papers that are free on the publisher’s page without an open licence. For a thesis or a systematic review, also search your library’s databases and keep a record: how to write a search strategy shows you how. Then take your best paper and follow its citations to the papers a keyword search missed. ## What is a DOI, and how do I use one? A DOI is a permanent ID for a paper, and it is the most useful thing to copy when you hit a paywall. It looks like 10.1000/182, the example the DOI Foundation uses. Put https://doi.org/ in front of it and you have a link to the paper. Look for the DOI near the title on the publisher’s page. If you only have a title, paste it into Crossref’s free metadata search . A DOI will not take you through a paywall: it often lands on the page with the abstract. What it gives you is an exact match, so your library finds this paper and not one with a similar title. ## How do I get a paywalled paper legally? Get a paywalled paper legally by working through these six steps in order. They start with what you can do alone and end with asking a person. - Check the other versions. The same paper can sit in several places, so search its exact title in Google Scholar. Its help page says to “click a link labeled [PDF] to the right of the search result”, or to try “All versions” under it. - Add a browser extension. It does the checking on every paper you open. Unpaywall looks for a free copy of the paper on your screen, and says it “points you to legal, author-posted manuscripts”. CORE Discovery is another free extension for the same job. - Search your library with the DOI. Your library may already pay for that journal. Sign in to its search and paste the DOI or the title. Studying from home? Ask your library how to reach its journals off campus. - Find the author’s repository copy. Many authors post a version of a paper in their university’s repository, so search their name and the title there. New papers may not be up yet: embargoes usually run 12 months in the sciences, and 18 months at Taylor & Francis or 24 at Wiley in the social sciences and humanities. The copy may be the accepted manuscript, which Elsevier says has no publisher copy-editing or pagination, so check page numbers before you quote. - Ask for an interlibrary loan. Your library requests a copy from another library. Rules differ, as three South African libraries show. At Unisa , the service is free for staff and for registered master’s and doctoral students. At Wits , it is primarily for staff, researchers and postgraduates, and “there is usually a cost incurred”. At UCT’s Graduate School of Business library , “PDFs of e-journal articles will be e-mailed to you directly”. Undergraduates may not qualify, so ask. - Email the author. This is normal. The University of Hull library says “It is common academic practice to request copies of journal articles direct from the author.” Look for the corresponding author’s address in the abstract. They may send the published version or a pre-print, “depending upon publisher restrictions”, or they may say no. Asking costs one email. Steal this email. Copy it, fill in the brackets and keep it short: Subject: Request for a copy of your paper on [topic] Dear [title and surname], I am a [level] student at [university], working on [topic]. Your [year] paper in [journal], “[title]” (DOI: [DOI]), looks directly relevant, but my library does not have access to it. Would you be willing to send me a copy for my own study? Thank you for your time. [Your name] ## What do the open-access colours mean? The open-access colours tell you why a paper is free and which copy you are reading. These definitions follow a 2018 study in PeerJ by Piwowar and colleagues. The four open-access colours and what each means when you are trying to read a paper Colour Where the free copy is What it means for you Gold In an open-access journal Free at the journal Hybrid In a subscription journal, under an open licence Free at the journal, though its other papers may be paywalled Green In a repository, while the publisher’s copy is paywalled Free, but it may be a version from before the final one Bronze On the publisher’s page, with no clear licence Free to read today, and it may not stay free The same study estimated that “at least 28% of the scholarly literature is OA”, rising to 45% of articles from 2015, the newest year it covered. More than half of papers in biomedical research and mathematics were free, against less than 20% in chemistry and in engineering and technology. Those figures are years old, but the lesson holds: free copies will cover part of your list, and how much depends on your subject. ## What do I do once I have the papers? Once you have the papers, read them closely. Litrevu helps with that part. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Comparing papers side by side is also how you start to see what they leave open, which is the first step in finding a research gap . The reading, the judgement and your own writing stay yours. ## Frequently asked questions ## Is it legal to read free research papers online? Yes, when the copy comes from a publisher, an open-access archive, a university repository or your library. Free to read is not the same as free to reuse: PubMed Central points out that free access “does not mean that there is no copyright protection”. Cite the paper as usual, and check the licence before you republish a figure. ## Are free research papers lower quality than paid ones? Not because they are free. Open access describes how a paper reaches you, not how good it is. Check it like any source: did it go through peer review, where was it published, and has it been retracted ? ## Can I get research papers if I am not at a university? Yes. Google Scholar, CORE, PubMed Central, preprint servers, browser extensions and repositories are open to anyone, and anyone can email an author. Only the two university library steps need a student login. ## What if I can only read the abstract? Keep working through the paywall steps, and do not cite the paper yet: an abstract gives you the claim, not the method behind it. If you cannot get the paper, ask a librarian or your supervisor, or use a paper you can read that makes the same point. If you only know it through another author, cite it as a source within a source . ## Does Litrevu download paywalled papers? No. Litrevu only fetches open-access papers. For anything else, the Research Paper Finder gives you the DOI. Once you have the PDF, you can upload it to Litrevu with the rest of your papers. ## What should you do next? Type your topic into the free Research Paper Finder. Open the PDFs it finds, then take the DOIs of the rest through the six steps above. Find papers on your topic . ## Related Guides - Academic Sources: What Counts and How to Find Them - Snowballing in a Literature Review: How to Find Papers by Citation Chaining (2026) - How to Write a Search Strategy for a Literature Review - How to Find a Research Gap: Steps, Types and Examples --- # AI Research Question Generator vs Questions From Your Papers URL: https://litrevu.com/blog/ai-research-question-generator Category: AI & Research Writing Published: 2026-11-04 Summary: An AI research question generator suggests questions from a topic. Test each against your own papers, the FINER criteria and your university's AI rules. AI & Research Writing ## AI Research Question Generator vs Questions From Your Papers By Samuel de Bruyn · 4 November 2026 · 11 min read An AI research question generator turns a topic you type into a list of candidate research questions, but the free generators checked for this guide (November 2026) work from the topic alone, so they cannot tell you whether a question is already answered in the papers you have read. Use one to widen your options, then keep only the questions that survive three tests: your own papers, the FINER criteria, and your university’s rule on AI for idea generation. Definition: AI research question generator. An AI research question generator is a tool that takes a short description of a topic and returns candidate research questions written by a large language model. A question from a generator is a starting option, not evidence of a research gap, until the student checks it against the published literature. Question Short answer Source What does a free generator ask for? A topic. One asks for a single box of up to 255 characters; another asks for research area, audience and constraints (timeline, data, budget). Neither asks for papers. Two generator pages ranking for the query, checked November 2026 Are AI research ideas novel? Blind reviewers judged LLM ideas more novel than expert ideas (p < 0.05) but slightly weaker on feasibility. Si, Yang and Hashimoto, arXiv 2409.04109 (2024) What happened when a question agent drew on papers? In CoQuest, an agent drawing on 2,043 HCI papers, 20 graduate researchers created 504 research questions; depth-first generation produced questions rated more novel. Liu et al., CHI 2024 How do you test a question? FINER: Feasible, Interesting, Novel, Ethical, Relevant. Farrugia et al., Canadian Journal of Surgery 53(4), 2010 Is it allowed? Often yes for brainstorming; the three universities checked require supervisor agreement, a declaration or both. SAS University of London, University of Alabama, Stellenbosch University ## What is an AI research question generator? An AI research question generator is a web tool that asks for a topic and returns a list of candidate research questions produced by a large language model. The two free generators checked for this guide do not ask for the papers you have read, so the questions come from the model’s general training, not from your literature. Two generator pages that rank for the query in a web search, checked in November 2026, show the pattern. The first offers one input box with a 255-character counter, asks for a topic or search term, and promises several focused, actionable questions. The second asks the user to describe a research area, a target audience and constraints such as timeline, data and budget, and returns a table sorted by question type and a feasibility score. Neither page accepts a PDF. A research question generator is a brainstorming tool: it cannot confirm that a question is open, because it has not read the field you are writing about. ## Are AI-generated research questions any good? AI-generated research ideas can be judged more novel than ideas written by experts, but they tend to be weaker on feasibility, and novelty without a literature check is not the same as a gap. Two published studies give numbers, one on research ideas in general and one on research questions specifically. Si, Yang and Hashimoto (2024) recruited over 100 NLP researchers to write research ideas and to review ideas blind, comparing human ideas with ideas from an LLM agent. The authors report that “LLM-generated ideas are judged as more novel (p < 0.05) than human expert ideas”, while the LLM ideas were “slightly weaker on feasibility”. The same paper lists “failures of LLM self-evaluation” and a “lack of diversity in generation” as open problems. For a student, the practical reading is that a long generated list can hold many near-duplicates, and the model’s own rating of its ideas is not a reliable filter. CoQuest , a research prototype presented at CHI 2024 by Liu and colleagues, tested research question co-creation with an LLM agent that drew on a pool of 2,043 HCI papers. Twenty HCI researchers from eight institutions, all graduate students or just graduated, created 504 research questions in total. Participants rated breadth-first generation (three questions at once) higher on creativity (3.78 against 3.18) and trust (4.15 against 3.50), while depth-first generation (each question building on the last) produced questions rated more novel. Study Who took part Main finding What it means for your proposal Si, Yang and Hashimoto, 2024 (arXiv 2409.04109) Over 100 NLP researchers LLM ideas judged more novel (p < 0.05), slightly weaker on feasibility Check feasibility yourself; novel-sounding is not the same as doable in a master's or PhD timeline Liu et al., CoQuest, CHI 2024 20 HCI researchers (graduate students or just graduated) from 8 institutions 504 questions; breadth-first felt more creative and trustworthy, depth-first rated more novel Building on one question step by step produced more novel questions than a broad list did ## How is a generator different from building research questions from your own papers? A generator starts from a topic and returns plausible questions; building questions from your own papers starts from what those studies found, missed or disagreed about, so each question arrives with the evidence that it is open. The difference matters most in a proposal, where an examiner asks why the question needs answering. Feature Free AI research question generator Questions built from your own papers Input A topic description, sometimes with audience and constraints The papers, reports and PDFs you have collected Basis for each question The language model's general training Findings, limitations and conflicts in named studies Check that the question is unanswered Not offered on the two pages checked You search your papers, then search wider Citation for the gap None The study and passage that show the gap Best use Widening options early, finding wording Choosing the question that goes in the proposal Farrugia and colleagues (2010) make the same point from a research-methods angle: research questions “arise out of a perceived knowledge deficit within a subject area or field of study”, and “it is imperative to understand what has been studied about a topic to date”. ## How do you test an AI-generated research question? Test an AI-generated research question in four steps: check whether your papers already answer it, name the study that shows the gap, score it against the FINER criteria, and write your own version with your method in mind. A question that fails the first two steps is a topic, not a research question. - Search your own papers first. Ask whether any paper you hold reports on the same population, setting and outcome. If one does, the generator question is either answered or needs narrowing. Litrevu’s guide to checking whether a research question has already been answered walks through the search. - Name the gap. Point to the limitation, conflict or missing population in a specific study. The research gap guide lists where gaps usually appear in a paper. - Score the question against FINER. The FINER criteria come from Hulley and colleagues and are summarised by Farrugia et al. (2010) in the Canadian Journal of Surgery. - Rewrite it yourself. Fit the wording to your method and level, then align it with your aims and objectives . FINER letter Question to ask of an AI-generated research question F: Feasible Can I get the data, participants and skills within my degree's timeline? I: Interesting Would my supervisor, and readers in my field, care about the answer? N: Novel Is the question unanswered in my papers and in a wider database search? E: Ethical Could an ethics committee approve the study the question implies? R: Relevant Does the answer matter to theory, practice or policy in my field? The letters are from Hulley and colleagues as cited by Farrugia et al.; the one-line test questions in the right-hand column are Litrevu’s wording. The Novel row is where generator questions need the most care: Si, Yang and Hashimoto measured novelty as judged by expert reviewers, and a reviewer’s judgement is not the same as a search of the literature. The research question guide covers FINER, PICO and the other frameworks in more depth. ## Is it allowed to use AI to generate research questions? Universities that publish a rule on this, such as the School of Advanced Study (University of London), the University of Alabama and Stellenbosch University, allow AI for brainstorming research questions with conditions: agreement with a supervisor first, a declaration of the use, or both. The rule belongs to your university and often to your department, so read the current policy and declare any use. University (country) What the rule says about AI for ideas and questions Condition School of Advanced Study, University of London (UK) Lists “Brainstorming and clarifying research questions and interventions” among uses for doctoral researchers Only “following discussion and agreement between the doctoral researcher and supervisor” University of Alabama Graduate School (US), December 2025 Sample department statement: “The use of generative AI is permitted for brainstorming, initial bibliographic searches” “A thorough disclosure of how generative AI was used” is required for theses and dissertations Stellenbosch University (South Africa) The postgraduate Internal Student Declaration has a tick box for “Idea Generation (e.g., research problem/design, hypothesis)” Student and supervisor both sign that a student-supervisor discussion on AI use took place In the US, the Alabama guidance covers master’s theses and doctoral dissertations, with each program setting its own parameters; the UK SAS rule covers doctoral researchers. All three rules leave the final decision with the supervisor or the program, and all three expect AI use for ideas to be visible, through a prior agreement, a written disclosure or a signed form. The same pattern holds for the rest of a proposal, covered section by section in how to use AI for a research proposal . Litrevu’s AI disclosure statement generator and the guide to writing an AI use disclosure statement help with the wording. ## How do I turn my own papers into research questions with an AI assistant for writing backed by sources? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. On the research question stage, the work looks like this: - Add your papers. Upload the PDFs from your reading, paste a PDF link, a DOI or an arXiv link, or let Litrevu find open-access papers on your topic and pick the ones you want. - Ask what the papers cover. Ask questions such as “Which populations and settings do these studies use?” or “What limitations do the authors state?” Every answer cites the passage in your papers behind it, and Litrevu says when your papers do not cover a question. - Compare the studies side by side. Line the studies up in a cited table (population, setting, method, finding) and look for rows where findings disagree or where no study covers a group. - Open each citation. Every citation opens the highlighted passage on the PDF page, so you read the evidence for a possible gap yourself. - Write your candidate question, then test it. Ask your papers whether any of them already answers your question. Paste the paragraph that justifies the question and get each claim back as Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover a claim. It is a cue to search wider databases, never proof that the gap exists in the literature. The student decides which gap is real and writes the question; Litrevu lines up and checks the evidence in the student’s papers. ## What does a generator question look like next to a paper-grounded question? A generator question is usually broad and unanchored, while a question built from your papers names a population, a setting and the study that leaves it open. The table below is a format illustration with placeholders, not real findings. Version Format illustration (placeholders only) Generator output “How does [intervention] affect [outcome] in [broad group]?” Gap from your papers (Author, Year) and (Author, Year) studied [intervention] in [setting A] only; (Author, Year) lists [setting B] as a limitation. Your rewritten question “How does [intervention] affect [outcome] among [specific group] in [setting B]?” Claim check on your rationale “No study has examined [setting B].” comes back Not in your papers (search wider before you claim the gap) ## Frequently asked questions ## Is there a free AI research question generator? Yes, several free AI research question generators rank in web search, and the two checked in November 2026 ask only for a topic description. They suggest candidate questions but do not read your papers, so each question still needs a literature check before it goes into a proposal. ## Can ChatGPT write my research question? ChatGPT can suggest candidate research questions from a topic, but a thesis is often assessed on the research question itself. The University of Alabama Graduate School notes that theses and dissertations assess "formulating an original research question", so check your program's rule, agree any use with your supervisor and declare it. ## Do I have to declare using AI to brainstorm research questions? Often yes. Stellenbosch University's postgraduate declaration has an "Idea Generation" box covering the research problem, and the School of Advanced Study, University of London, requires supervisor agreement before doctoral researchers use AI for brainstorming research questions. Rules vary by university and department, so read your own. ## Are AI-generated research ideas original? In a study with over 100 NLP researchers, blind reviewers judged LLM-generated ideas more novel than expert ideas (p < 0.05) but slightly weaker on feasibility (Si, Yang and Hashimoto, 2024). Judged novelty is not proof that the literature has not covered an idea, so search before you claim a gap. ## Can an AI research question generator find a research gap? No. A free AI research question generator works from the topic you type, so it cannot show which study leaves a question open. A research gap comes from the limitations, conflicts and missing populations in named studies, which means reading or searching the papers themselves and citing the study that shows the gap. ## What is the FINER criteria for a research question? FINER stands for Feasible, Interesting, Novel, Ethical and Relevant, a checklist from Hulley and colleagues for judging a research question (summarised in Farrugia et al., Canadian Journal of Surgery, 2010). An AI-generated research question should pass all five letters before it goes in a proposal. ## What should you do next with your candidate research questions? Test every candidate question, generator-made or your own, against the papers you already have before you choose. Add those papers to Litrevu, ask what they cover, compare them in a cited table and check the rationale for your question against them. The thinking, the choice and the wording stay yours. Add your papers and test your questions . Free to start, no credit card required. ## Related Guides - How to Write a Research Question (Step-by-Step, With Examples) - Which AI Tool Tells You If Your Research Question Has Already Been Answered? (2026) - How to Use AI to Find a Research Gap in Your Own Papers - How to Write a Research Proposal: 7 Sections + Template --- # How to Use AI for a Research Proposal, Section by Section URL: https://litrevu.com/blog/how-to-use-ai-for-a-research-proposal Category: AI & Research Writing Published: 2026-11-02 Summary: Use AI to find, read, compare and check the papers behind a research proposal; keep the gap, questions and wording yours. Rules by section and country. AI & Research Writing ## How to Use AI for a Research Proposal, Section by Section By Samuel de Bruyn · 2 November 2026 · 11 min read Use AI on a research proposal for the reading work: finding papers, summarising and comparing them, and checking your claims against the passages you cite. Keep the research gap, the research questions, the argument and the wording your own, because several universities and funders do not accept AI-written proposal text as your original work, and many ask you to declare substantive AI use. What “using AI for a research proposal” means: using an AI tool to find, read, compare or check the sources behind a research proposal, while the student decides the gap, frames the questions and writes the text. Having AI generate the proposal text is a different use, and many universities restrict or ban it. ## What can AI do on each section of a research proposal? AI helps most on the research proposal sections that depend on reading (background, literature review, gap) and is least acceptable on the sections that carry your judgement (research questions, contribution, final wording). The sections follow how to write a research proposal . Proposal section What AI can do with your papers What stays yours Where the line usually falls Title and abstract List the key terms your papers use for the topic The title, the proposal’s central claim, the abstract’s wording Checking terms is fine; generated wording is grey Introduction and background Summarise what your papers report about the problem, with citations Which facts frame the problem, and the paragraphs themselves Reading help is fine; ask before using generated text Literature review Line studies up by population, method and finding, and flag where they conflict The themes, the synthesis and the argument Comparing is fine; the synthesis is your writing Research gap and rationale Show which populations, settings or methods none of your papers cover Which gap is real (after a wider search) and why it matters Finding candidates is fine; the gap claim is yours to verify Research questions and objectives Check whether a candidate question is already answered in your papers The questions themselves Generated questions are grey at best; ask your supervisor Methodology Pull out the methods and samples that comparable studies used The design, and the justification for it Reading methods is fine; the justification is yours References Format citations in your department’s style and export them Checking that each reference exists and says what you cite it for Fine, if every reference is checked The last column is a default. The binding rule is whatever your university, department, supervisor or funder sets for that proposal. ## Can you use AI to write a research proposal? Many universities allow some AI help with a research proposal (UCL’s “assistive role” category is one example), but many also restrict or ban AI-written proposal text, including in PhD applications. The University of Warwick’s Department of Sociology (UK) says it expects “the research proposal and application materials to be your own original writing” and states: “We strongly discourage students from getting assistance from AI in the development of their research proposal” ( Warwick Sociology, research proposal guidance ). Warwick Sociology applicants who used any AI should say so, in what ways and which aspects of the work it relates to, and give full references to the AI sources used, in a statement that must be “clearly located on the front page of their proposal”. Funders draw the line more sharply: the US National Institutes of Health (NIH) does not treat applications “substantially developed by AI” as the applicants’ original ideas ( NIH notice NOT-OD-25-132, 17 July 2025 ). Many universities do not allow AI-written text in submitted work even after you edit it. The defensible default for a research proposal: use AI to read, compare and check; write the words yourself; declare what you used. ## What do universities say about AI in a research proposal? Universities set AI rules per institution and often per programme or assessment, so the rule for your research proposal is the one your department publishes. These examples were read in November 2026. University (country) Published rule What it means for a research proposal University of Warwick, Sociology (UK) Proposal must be “your own original writing”; AI assistance is strongly discouraged; any AI use is declared on the front page The text is yours, and any AI use is declared UCL (UK) Staff guidance (“not a formal policy”) places each assessment in one of three categories: “GenAI tools cannot be used”, “GenAI tools can be used in an assistive role” or “GenAI has an integral role”; “Students must acknowledge GenAI use, but do not need to cite it” Find your proposal’s category before using any AI tool; the person setting the assessment makes the final decision University of Georgia Graduate School (US) Generative AI in theses and dissertations is “prohibited unless specifically authorized by members of the advisory committee for use within the approved scope”; approved use “should be disclosed in a statement within the thesis or dissertation” The policy does not name proposals, so ask your committee whether it covers your prospectus (in the US a “thesis” is usually a master’s, a “dissertation” a PhD) Stellenbosch University (South Africa) “All postgraduate students at Stellenbosch University are required to declare any use of Artificial Intelligence (AI) tools”; the declaration discussion should ideally happen “during the proposal preparation” Agree AI use with your supervisor at proposal stage; you both sign an internal form confirming that discussion Sources: UCL ; University of Georgia (18 January 2024) ; Stellenbosch University . ## What do research funders say about AI in grant proposals? NIH, NSF and UKRI each set rules on AI in research proposals: NIH does not treat AI-developed applications as original, NSF encourages and UKRI expects applicants to be open about AI use, and both NSF and UKRI restrict reviewers from putting proposals into AI tools. A PhD student applying for a studentship or first grant meets these rules directly. NIH (US). Since the 25 September 2025 receipt date, NIH does not treat applications, or sections, “substantially developed by AI” as the applicants’ original ideas. AI use detected after an award can be referred to the Office of Research Integrity and can cost the grant ( NOT-OD-25-132 ). NSF (US). The National Science Foundation’s notice of 14 December 2023 encourages proposers to state in the project description the extent of any generative AI use, and says “Proposers are responsible for the accuracy and authenticity of their proposal submission”. NSF reviewers “are prohibited from uploading any content from proposals” into generative AI tools that NSF has not approved ( NSF notice on generative AI in merit review ). UKRI (UK). Under UK Research and Innovation’s policy of 23 September 2024, applicants are “expected to be transparent where they have used generative AI tools in the development of an application”. Its list of “Examples of substantive use that could be declared” includes “comparing literature sources” and “interpreting, analysing or summarising data (including audio, image files) and text”. Minimal use, such as “improving the standard of English” or “formatting or reducing word count”, need not be disclosed, and the declaration “will not affect the assessment process” ( UKRI policy ). ## How do you check AI output before it goes into your research proposal? Check every AI summary, comparison and citation against the source passage before it goes into a research proposal. Duke University Libraries’ guide to AI in literature reviews puts it plainly: “Generative AI tools can produce inaccurate citations and summaries”, and users must “verify all information independently” ( Duke University Libraries, updated 28 September 2026 ). Run three checks on every AI output before it enters a research proposal: - The passage check. Open the cited page and read the sentence; if it does not say what the summary says, drop the claim. - The reference check. Confirm each reference exists and has the right authors, year and DOI, using the free reference checker and the steps in how to spot fake AI citations before you submit . - The coverage check. Search beyond your reading list before you call something a research gap, as how to use AI to find a research gap explains. ## How do I use an AI assistant for writing backed by sources on my research proposal? An AI assistant for writing backed by sources runs the reading side of a research proposal on your own papers: add them, ask them questions, compare them in a cited table and check your paragraphs against them. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Here is the proposal workflow in Litrevu, step by step as on its how it works page. - Add the papers behind your research proposal. Upload PDFs, paste a PDF link, a DOI, an arXiv link or a paper’s text, or let Litrevu find open-access papers on your topic and pick the ones you want. - Ask the papers your proposal questions. “Which populations have these studies sampled?” “Which methods did they use?” “Where do their findings disagree?” Answers cite only your papers, and Litrevu says so when your papers do not cover a question. - Open every citation. Each citation opens its passage highlighted on the PDF page it came from, so you read the evidence before your proposal relies on it. - Compare the key studies in a table. Line the studies up side by side, with citations, and see where they agree and where they differ. Rows where findings conflict, or where no paper covers a population, are candidates for your gap and rationale. - Check the paragraphs you wrote. Paste your problem statement, gap paragraph or rationale. Each claim comes back Supported, Partly supported, Contradicted or Not in your papers. - Cite and export. Switch between APA, MLA, Chicago, IEEE, Harvard and Vancouver, and export references to BibTeX or RIS. A claim check on a gap sentence looks like this (a format illustration, not real output): “No study has examined this intervention in rural schools (Author, Year; Author, Year).” Not in your papers “Not in your papers” means your library does not cover that claim. It is a cue to search wider, not proof that a gap exists in the literature. Litrevu finds and lines up the evidence; you decide which gap is real, frame the questions and write the proposal. ## Which AI tools help with which part of a research proposal? AI tools for a research proposal fall into two groups: discovery tools that search the published literature for papers, and tools that read, compare and check the papers you have chosen. A proposal needs both. Tool What the vendor says it does Where it fits in a research proposal Elicit Search across a corpus of more than 138 million papers, structured data extraction into tables, and a systematic review workflow that screens thousands of papers; it also works with PDFs you upload ( Elicit help centre ) Finding papers at scale, extracting data into tables, and screening for a systematic-review proposal Consensus An AI-powered academic search engine over peer-reviewed papers; its Consensus Meter shows the share of studies supporting or contradicting a yes/no claim ( consensus.app ) Quick evidence answers to a specific question while you scope the topic ResearchRabbit Paper discovery through citation graphs: start from one paper and expand through related works, authors and topics, with visualisations of how topics relate ( researchrabbit.ai ) Mapping how the field’s papers connect and spotting related work your search missed Litrevu Answers questions about the papers in your library with cited passages, compares papers in a cited table and checks your paragraphs against them ( how it works ) Reading and comparing your chosen papers, finding where they conflict and what they do not cover, and checking your gap and rationale Elicit, Consensus and ResearchRabbit are stronger than Litrevu at discovery across the published literature, and Elicit is built for systematic-review screening at scale. Litrevu’s part is reading and checking once the papers are chosen; for a large pile, see how to read research papers quickly for a research proposal . ## How do you declare AI use in a research proposal? Declare AI use in a research proposal with a short statement naming the tool, what you used it for and which parts it touched, placed where your university or funder asks. Warwick Sociology wants the statement on the proposal’s front page; NSF encourages it in the project description; at Stellenbosch, student and supervisor sign an internal form confirming they discussed AI use, and a separate examination declaration goes with the thesis. A disclosure statement for a research proposal might read like this (a format illustration; adapt it to your actual use): I used [tool name] to summarise and compare the papers on my reading list and to check the claims in my own draft against those papers. I did not use it to write the text of this proposal. I checked every citation against its source. The free AI disclosure statement generator builds the wording from your answers, and how to write an AI-use disclosure statement covers placement and referencing. For where the line sits, see the ethics of AI in research writing . ## Frequently asked questions ## Can I use ChatGPT for my research proposal? Whether you can use ChatGPT for a research proposal depends on your university, department and assessment, not on the tool. UCL's guidance, for example, places each assessment in one of three categories, from "GenAI tools cannot be used" to "GenAI has an integral role". Where AI is allowed, use it to read and check sources, write the proposal yourself, and declare the use. ## Do I have to declare AI use in a PhD proposal? Many universities and funders expect you to declare substantive AI use in a PhD proposal. Stellenbosch University requires all postgraduate students to declare any use of AI tools, Warwick Sociology wants the statement on the proposal's front page, and UKRI expects applicants to be transparent about AI use and lists comparing literature sources among the examples of substantive use that could be declared. ## Can I use AI to improve the English in my research proposal? Many institutions treat language polishing as minimal AI use. UKRI, for example, says applicants need not disclose minimal uses such as "improving the standard of English" or "formatting or reducing word count". A university may set a stricter rule for an assessed proposal, so check your department's policy before you rely on the UKRI line. ## Can my research proposal be rejected for using AI? A research proposal can be rejected or investigated if its AI use breaks the rules that apply to it. NIH may refer AI use detected after an award to the Office of Research Integrity, and the University of Georgia counts generative AI in theses and dissertations as "unauthorized assistance per the Academic Code of Honesty" unless the advisory committee approves it; ask your committee whether that rule reaches your prospectus. Declared AI use within the rules is a different matter. ## What is an AI research proposal generator? An AI research proposal generator is a tool that produces the text of a proposal from a prompt. Generated text is the use that Warwick Sociology discourages and NIH will not treat as original. For an academic proposal, use AI to read, compare and check your sources, and keep the writing yours. ## Where should you start with AI on your research proposal? Start with your department’s AI policy and the papers you already have. Put the reading list into a tool that answers only from those papers and shows the passage behind every answer, then write the gap and rationale yourself. Add your papers and ask them your first proposal question . Free to start, no credit card required. ## Related Guides - How to Write a Research Proposal: 7 Sections + Template - How to Use AI to Find a Research Gap in Your Own Papers - How to Write a Rationale for a Research Study + Examples - How to Write a Literature Review for a Research Proposal (2026 Guide) --- # Can I Use AI for My Dissertation? What's Allowed by Stage URL: https://litrevu.com/blog/can-i-use-ai-for-my-dissertation Category: AI & Research Writing Published: 2026-11-02 Summary: Most universities allow AI to proofread a dissertation but not to write it. See what is allowed at each stage, with named rules and how to declare use. AI & Research Writing ## Can I Use AI for My Dissertation? What's Allowed by Stage By Samuel de Bruyn · 2 November 2026 · 11 min read Most published university rules let you use AI to proofread and fix grammar in a dissertation, some also allow it for explaining concepts or brainstorming search terms, and most forbid AI-written text in the work you submit. Every policy cited here requires some declaration of AI use, and the exact line is set by your university, faculty and committee: declared AI use is accepted at UCL, while the University of Georgia bans it unless your committee approves. Permitted AI use in a dissertation is any use of an AI tool that your university’s written rules allow for that task, carried out within the scope your supervisor or committee approved, and declared in the form your university asks for. Anything outside that scope is unauthorised, even if another university allows it. ## What AI use is allowed at each stage of a dissertation? The table sorts each dissertation stage by what published university rules usually allow, allow only with approval or declaration, and usually forbid, as of November 2026. Your own university’s rule wins wherever the two differ. Stage Usually fine Check first and declare Usually not allowed Named rule Topic and proposal Explaining concepts and methods Idea generation, outlining AI writing substantive parts of the proposal FIU Graduate School; UCT Commerce Searching for sources Familiarising yourself with a topic (UCL) Search-term brainstorming; any AI search tool AI gathering and evaluating sources (UAH default) UCL Doctoral School; UCT Commerce; UAH Graduate School Reading and summarising papers Summarising to get familiar with a topic (UCL) Uploading published papers to an AI tool Pasting AI summaries into the dissertation UCL Doctoral School; University of Melbourne; UCT Commerce Literature review and synthesis None without approval Reading plans, with prompt logs AI-written synthesis; fabricated or unverified references UCT Commerce; FIU Graduate School Data analysis Support with proper oversight (FIU) Code and syntax help, exploratory summaries Outsourcing analysis or interpretation to AI FIU Graduate School; UCT Commerce Writing Practice writing that stays out of the thesis (Bristol) Organising ideas and outlining (FIU) AI-generated text in the thesis Bristol; Birmingham; FIU Graduate School Proofreading and editing Spelling, punctuation and basic grammar Copyediting for clarity (UCL, UCT) Rewriting arguments or cutting to the word count Bristol; Birmingham; UCL; UCT Commerce References Formatting citations (UAH) Any AI help beyond formatting AI-produced reference lists (Melbourne advises against) UAH Graduate School; University of Melbourne Defence or viva Not addressed by these policies Disclosing AI use to your committee, including in drafts for review Being unable to explain or reproduce your results UCT Commerce; FIU Graduate School ## Can I use AI to find and read sources for my dissertation? Using AI to find and read sources for a dissertation is allowed at some universities and forbidden by default at others. UCL’s doctoral guidance lists “using generative AI to summarise long or complex information to make it easier to review” among the uses that may not require acknowledgement. The University of Alabama in Huntsville (UAH) Graduate School takes the opposite default: “Using generative AI to gather and evaluate academic sources for literature reviews” is prohibited unless a college or department expressly allows it. The University of Melbourne’s guidance for graduate researchers says AI tools “should not be relied on for understanding of the literature” and warns that uploading published work to an AI tool for summarising is a risk because “those works and outputs may be subsequently used by the AI tool without acknowledgement, violating copyright protections.” UCT’s Faculty of Commerce allows “search-term brainstorming” and “drafting reading plans” if the department authorises it, requires prompt logs for the literature review, and lists “inserting AI-generated summaries or citations directly into dissertations” as not permitted for credit. The common ground is narrow: AI may help you decide what to read, but you read, judge and cite the papers yourself. ## Can I use AI to write or rewrite parts of my dissertation? Using AI to write or rewrite parts of a dissertation is forbidden by most university rules cited in this article, and the few that tolerate AI text require it to be declared or quoted. The University of Bristol says “you are not permitted to use generative AI tools to write any text that is used in your thesis.” The University of Birmingham states that “Generative AI tools must not be used by PGRs to write their theses and/or to clarify and develop their arguments.” US graduate schools draw the same line. Florida International University (FIU) lists “Using AI to generate or re-write substantive portions of proposals, theses, dissertations, or exam responses” as unacceptable, while allowing “Assistance with organizing ideas, outlining, or clarifying writing”. Editing an AI-written draft does not make the text acceptable under the UCT and Melbourne rules: UCT Commerce prohibits “drafting substantive sections that introduce new claims or synthesis in place of the student’s own writing”, and Melbourne’s graduate researcher guidance counts “Knowingly having a third party, including artificial intelligence technologies, write or produce any work” as academic misconduct. Melbourne requires any AI-generated text included in a thesis to be “presented in quotations”, and UCL requires AI-drafted text to be declared. ## Can I use AI to proofread or edit my dissertation? AI proofreading of a dissertation is the most widely allowed use, as long as the AI corrects errors and does not improve the content. Bristol says “It is acceptable to use AI tools to check for simple typos and grammatical errors”, and Birmingham allows tools to “correct spelling, punctuation and basic grammar errors.” The limit is copyediting. Birmingham’s guidance for research students says AI proofreading must not be used to “Alter text to clarify and/or develop the ideas, arguments, and explanations”, to “Correct the accuracy of the information”, or to reduce the length of a submission to meet a word limit. UCL says that “If GenAI is used to draft any text including copyediting (rather than proofreading), this must be declared”. ## Can I use AI for data analysis in a thesis? AI help with data analysis in a thesis is usually allowed only with oversight, approval and disclosure, and never as a replacement for your own analysis. FIU permits “Supporting data analysis with proper oversight”, allows AI-generated code “if approved by the committee or faculty advisor”, and wants AI use in analysis reported in the Methods section. UCT Commerce prohibits “Outsourcing analysis or interpretation entirely to AI without verification” and requires that students can “explain, reproduce, and validate the results.” ## Do I have to declare AI use in my dissertation? Yes: every university policy cited in this article requires some form of declaration, though the place differs. UCT Commerce requires “a front-matter disclosure of AI use” in every dissertation, stating the tool, version and purpose. FIU wants disclosure in the preliminary pages, naming “The specific AI assisted tools used” and “The purpose and scope of their use”. UCL candidates list AI support in the Doctoral Candidate Thesis Declaration Form. Keep records as you go: the University of Melbourne says graduate researchers “must maintain records of generative AI use, including programs or applications used, dates and prompts.” The AI disclosure statement generator turns those records into a first version of the statement, and the guide to writing an AI-use disclosure statement covers placement and wording. ## What AI use do US graduate schools allow in a thesis or dissertation? US graduate schools usually leave the decision to the student’s advisory committee, and the default ranges from a ban to permission with disclosure. In the US, a “thesis” usually means a master’s project and a “dissertation” a PhD. - University of Georgia : generative AI in theses and dissertations “is considered unauthorized assistance” unless the advisory committee authorises it (policy posted 18 January 2024). - Auburn University : AI use in research and writing “must be disclosed and approved by the student’s advisory committee”, and the disclosure is part of the official format requirements (last updated June 2025). - UAH: formatting documents and citations is listed as acceptable use, and significant AI use is disclosed on the Notification of Examination/Defense form. ## What AI use do UK universities allow in a PhD or master’s dissertation? Bristol, Birmingham and UCL all allow AI proofreading for research students and say which other uses must be acknowledged or declared; Bristol and Birmingham ban AI-written thesis text, and UCL requires AI-drafted text to be declared. Bristol allows AI for typos, practice writing kept out of the thesis, and (with acknowledgement) some translation, code, diagrams and formatting. Birmingham allows AI “as study aids for their personal learning and in their research” and proofreading declared in the acknowledgements, but bans AI for writing, developing arguments or translating large amounts of text into English. UCL’s Doctoral School aims to “promote ethical and transparent engagement with GenAI tools rather than seek to ban them”, and a sample declaration on its page reads “Notebook LM was used in the initial stages of the literature review”. ## What AI use is allowed in a thesis in Australia? At the University of Melbourne, graduate researchers may get limited AI editing help and must declare digital assistance tools in the thesis. Melbourne’s guidance for graduate researchers says “editing assistance should be limited to elements such as language and expression”, does not recommend using GenAI “to produce a reference list or to manage your citations and references”, and says “Any text generated by AI tools and included in the thesis must be presented in quotations”. ## What AI use is allowed in a dissertation in South Africa? At the University of Cape Town (UCT), the Faculty of Commerce has published a detailed stage-by-stage framework for AI in dissertations. The UCT Commerce framework (revised December 2025) applies to “all Honours, Masters and PhD dissertations (major and minor)”. Spelling and grammar software is allowed; anything broader needs departmental guidelines, and supervisors “are not authorised to independently permit AI use beyond what is indicated.” UCT Commerce requires every student to “declare any use of AI and keep a record or portfolio of prompts and outputs”, and states that AI detection tools “are unreliable and may not be used as the sole evidence of misconduct”. At UNISA or any other South African university, find your own faculty’s rule. ## How do I find my own university’s AI rules for a dissertation? Your university’s AI rule for a dissertation sits in a hierarchy, and the most specific written rule applies. Check in this order: - The faculty or department guideline for dissertations (UCT Commerce and UAH both defer to department rules where they exist). - The graduate school or doctoral school policy, which applies when no department rule exists (UAH says guidelines “will default to those of the UAH Graduate School”). - Your supervisor or committee’s written approval for the specific tool and task (UGA and Auburn require committee approval). - The declaration form or thesis format guide, which says where the disclosure goes. Get any approval in writing, with the date and the scope of the approved use. ## How do I use an AI assistant for writing backed by sources within my university’s rules? An AI assistant for writing backed by sources fits the dissertation stages many rules allow with approval or declaration: finding, reading, comparing and checking evidence, while the student does the thinking and the writing. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. - Check the rule first. Confirm that your department allows AI reading support, and whether uploading published PDFs is acceptable given the copyright caution the University of Melbourne raises. - Add your papers. Upload PDFs, paste a PDF, DOI or arXiv link, or pick open-access papers Litrevu finds on your topic. - Ask, then read the passage. Answers are cited only from your papers, each citation opens the highlighted passage, and Litrevu says when your papers do not cover a question. - Compare in a cited table. See where studies agree and differ; you decide what the pattern means. - Write your own paragraph, then check it. Each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover the claim, not that the claim is false. - Log it for your declaration. Record the tool, dates and tasks. A format illustration of a claim check (placeholder, not a real result): Your sentence Label Cited passage “[Your claim about X] (Author, Year).” Partly supported Highlighted passage in (Author, Year) Litrevu can also draft text, but many universities, Bristol and Birmingham among them, do not allow AI-written text in a submitted thesis even after editing. Check your policy, write the dissertation yourself and declare how you used any tool. ## Frequently asked questions ## Can I use ChatGPT for my dissertation? You can use ChatGPT for a dissertation only for the tasks your university’s written rules allow, and usually only with a declaration. Most published rules allow AI proofreading and forbid ChatGPT-written text in the submitted work. The University of Georgia treats any generative AI use in a thesis or dissertation as unauthorised unless the advisory committee approves it. ## How much AI is allowed in a dissertation? No university cited in this article sets a percentage of AI that is allowed in a dissertation. The rules work by task instead: proofreading is usually fine, reading support and coding help often need approval and declaration, and AI-written text, arguments or analysis are usually not allowed. Check your department’s rule, because it overrides the graduate school default. ## Do I need to declare Grammarly or AI proofreading in my thesis? Whether you declare AI proofreading in a thesis depends on the university. UCL says help with grammar may not require acknowledgement but copyediting must be declared, while Birmingham requires PGR proofreading use to be declared in the thesis acknowledgements. If your rule is unclear, declaring the use is the safer choice. ## What happens if I use AI in my dissertation without declaring it? Undeclared AI use in a dissertation is treated as misconduct under the policies cited in this article. UCT Commerce states that “Undeclared or inappropriate AI use constitutes academic or research misconduct” and that degree awards are deferred until a review ends. UAH says undisclosed use may result in a student not completing their degree. ## Can my supervisor give me permission to use AI? A supervisor can approve AI use at some universities and cannot at others. UGA and Auburn place the decision with the advisory committee, and UAH requires students to discuss AI use with their advisor before using it. At UCT’s Faculty of Commerce, supervisors “are not authorised to independently permit AI use beyond what is indicated” in the faculty guideline. ## Where should you start? Start with your department’s written AI rule and a dated log of every AI tool you use. If your rule allows AI reading support, add the papers behind your chapter to Litrevu and check your own paragraphs against them. Try it on your own papers . Free to start, no credit card required. ## Related Guides - The Ethics of AI in Research Writing - How to Write an AI-Use Disclosure Statement for Your Assignment - How to Prove You Wrote Your Own Work - How to Write a Research Proposal --- # How to Read Research Papers Quickly for a Research Proposal URL: https://litrevu.com/blog/how-to-read-research-papers-quickly-for-a-proposal Category: Literature Review Published: 2026-10-28 Summary: Read research papers in three passes: 5 to 10 minutes to triage each, up to an hour for key papers, and a full read only for the few your proposal needs. Literature Review ## How to Read Research Papers Quickly for a Research Proposal By Wasim Ghoor · 28 October 2026 · 12 min read To read research papers quickly for a research proposal, read in passes instead of cover to cover: a five to ten minute first pass of the title, abstract, introduction, headings and conclusion to decide whether a paper matters, a second pass of up to an hour for the papers that do, and a full third pass only for the few your proposal stands on. That is S. Keshav’s three-pass method ( ACM SIGCOMM Computer Communication Review, 2007 ), and it means most papers in a proposal library get minutes, not hours. Reading research papers quickly means reading selectively: a short first pass decides which papers deserve deeper reading, and each paper is read only as deeply as your proposal needs. It is triage, not speed-reading, because your words per minute barely change; what changes is how many papers you read in full. Pass (Keshav, 2007) What you read Time per paper What you should know afterwards Use it for First pass Title, abstract and introduction; section headings; conclusions; a glance at the references About 5 to 10 minutes The paper’s category, context, apparent correctness, contributions and clarity (the “five Cs”) Every paper you find Second pass The whole paper with care, including figures and graphs, but skipping details such as proofs Up to an hour The main thrust of the paper, with its supporting evidence, well enough to summarise to someone else Papers your research question, method or argument draws on Third pass The whole paper, trying to “virtually re-implement” it and question every assumption About 4 to 5 hours for a beginner; about 1 hour for an experienced reader The paper’s assumptions, innovations and hidden weaknesses The few papers your proposal stands on or argues against Source: Keshav, S. (2007). How to read a paper. ACM SIGCOMM Computer Communication Review , 37(3). ## How long does it take to read a research paper? A research paper takes about 5 to 10 minutes for a first-pass read, up to an hour for a careful second pass, and about 4 to 5 hours for a full critical read by a beginner, according to Keshav’s three-pass method (2007). An experienced reader needs about an hour for that same full critical read. Why does a full read take hours when the words take minutes? It is the difference between reading a recipe and cooking it. Brysbaert’s meta-analysis of 190 studies puts the average adult silent reading rate in English at 238 words per minute for non-fiction ( Journal of Memory and Language, 2019 ), so 1,000 words of a paper takes a little over four minutes to read once. The hours go on checking methods, rereading results and following references. Speed-reading courses rarely help with research papers: a review by Rayner and colleagues found “a trade-off between speed and accuracy” ( Psychological Science in the Public Interest, 2016 ). Reading research papers quickly comes from choosing what to read deeply, not from moving your eyes faster. ## What is the three-pass method for reading research papers? The three-pass method is a way of reading a research paper in up to three increasingly careful readings, set out by S. Keshav of the University of Waterloo in ACM SIGCOMM Computer Communication Review in 2007. Each pass has a fixed scope and time, and the reader stops after any pass once the paper has given what they need. The first pass, of about five to ten minutes, has four steps in Keshav’s paper: - Carefully read the title, abstract and introduction. - Read the section and sub-section headings, but ignore everything else. - Read the conclusions. - Glance over the references, noting the ones you have already read. At the end of the first pass, Keshav’s method asks you to answer the “five Cs”: Category (what type of paper is this?), Context (which other papers is it related to?), Correctness (do the assumptions appear valid?), Contributions (what are the paper’s main contributions?) and Clarity (is the paper well written?). ## How do you read 100 papers for a research proposal? To read 100 papers for a research proposal, give all 100 a first pass, give a second pass only to the papers your research question, method or argument relies on, and save a full third pass for the handful your proposal builds on or argues against. With Keshav’s timings, 100 first passes at 5 to 10 minutes each take roughly 8 to 17 hours in total. Here is the arithmetic for a library of 100 papers, using Keshav’s 2007 timings for a beginner. The 30 and 5 below are illustrative counts, not a rule: Approach Papers at each depth Approximate total reading time Third pass on every paper 100 full critical reads at 4 to 5 hours 400 to 500 hours Three passes, triaged 100 first passes (5 to 10 min) + 30 second passes (up to 1 hour) + 5 third passes (4 to 5 hours) About 8 to 17 hours + up to 30 hours + 20 to 25 hours Where do the 100 papers come from? Keshav also describes a literature survey that fits a proposal well: find three to five recent papers in the area, give each a first pass, read their related-work sections, then look for citations and author names that keep recurring. Those recurring papers are the field’s key papers. Keshav then recommends two passes through the papers you collect. For the citation-following step in detail, see snowballing in a literature review ; if your search returns hundreds of hits, screening abstracts comes before any of the three passes. ## Which parts of a research paper should you read first? Read the abstract first, then the introduction and the conclusion, and only then decide whether the methods and results deserve your time. Three university reading guides agree on that order, with small differences in what comes next. - Vanderbilt University English Language Center ( Scholarly Reading Guide: Reading Efficiently ): when skimming, “Read specific sections of articles only: Abstract, Introduction, and Conclusion”. - A University of Cambridge library guide ( skim, scan and scrutinise ): read the abstract, then the aims, skip the literature review, go to the conclusion for the main findings, then the figures and, if time and need allow, the methods. - Caltech’s writing centre ( reading a research article ): many STEM professionals read “selectively and out of order”, starting with the abstract and reading in full only once a paper’s relevance is clear. Do not skip the middle of every paper, though. Hubbard and Dunbar surveyed 260 students and researchers in biological sciences and found that inexperienced readers “found the methods and results sections of research papers the most difficult to read” and undervalued the results section and critical interpretation of data ( PLOS ONE, 2017 ). For papers that reach a second pass, give the methods and results the extra time, because that is where a proposal’s argument gets tested. ## How do you decide which papers to read in full for a research proposal? Read a paper in full when your proposal depends on it: when it answers part of your research question, supplies the method you plan to use, reports a finding that conflicts with another paper, or is a recent review of your topic. Every other paper can stop at the first or second pass. Ask what you would lose if the paper disappeared from your proposal. Picture the proposal’s literature review as a bridge: a few papers are load-bearing pillars, many are deck planks, some are railings. Pillars get a third pass, planks a second, railings a first. Keshav’s five Cs (category, context, correctness, contributions and clarity) help sort them, because the context and contributions answers tell you where a paper sits in that bridge. Conflicting findings deserve a second pass even when the papers look minor, because a place where two studies disagree, or where no study covers your population, is often where a proposal’s research gap sits. How to find a research gap covers what to do next, and how to critically appraise a research paper gives a checklist for the third pass. ## How should you take notes so you don’t reread research papers? Take notes in a literature review matrix: one row per paper and the same columns for every paper, filled in at the end of each pass. Typical columns for a proposal are the research question, method, sample and setting, main finding, stated limitation and the page number for each entry, so you can return to the passage instead of rereading the paper. Each pass leaves a record. After a first pass, a row may hold only Keshav’s five Cs (category, context, correctness, contributions, clarity) and a one-line contribution. After a second pass, the method, sample, finding and limitation columns fill in. Newcastle University’s Academic Skills Kit makes the same point in its guide to effective reading strategies for extended work : check a text’s relevance from the abstract, introduction, conclusion and reference list, and re-read it fully only if it is useful. Litrevu’s free literature review matrix gives you the columns to start from. The rows that disagree and the empty cells then become the outline of your proposal’s literature review, covered in how to write a literature review for a research proposal . ## Which reading method is best for a research proposal? The three-pass method is the best fit for most research proposals, because it is the only one of these methods that attaches a time to each depth of reading, which gives clear stopping rules for a library of dozens of papers. Method Source How it works Time guidance Best for Three-pass method Keshav, ACM SIGCOMM CCR (2007) Three readings of increasing depth; stop after any pass 5 to 10 minutes, up to 1 hour, 4 to 5 hours (beginner) Large proposal or review libraries Skim, scan, scrutinise University of Cambridge library guide Skim for main ideas, scan for key words, then question the source critically No time figures given Deciding relevance, then judging quality Reading every paper in full None of the reading guides cited in this article recommends it for every paper Start to finish, every time About 4 minutes per 1,000 words at 238 words per minute (Brysbaert, 2019), plus checking time The few papers your proposal stands on ## How do I read papers for a research proposal with an AI assistant for writing backed by sources? With an AI assistant for writing backed by sources, you add the papers you found, ask all of them the same questions, check each answer against the passage it cites, and decide yourself which papers get a second or third pass. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. On your own proposal papers, the workflow looks like this: - Add your papers. Upload the PDFs from your search, paste a PDF link, a DOI or an arXiv link, paste a paper’s text, or let Litrevu find open-access papers on your topic and choose which to add. - Ask every paper the same first-pass questions. For example: “What is each study’s method and sample?”, “What is the main finding?” and “What limitation do the authors state?” Answers are cited only from your papers, and when your papers do not cover a question, Litrevu says so. - Open the citations before you trust them. Each citation opens the passage highlighted on the page of the PDF it came from, with the paper’s title, authors and year. Reading that passage is your check; the citation check confirms that a citation points to a passage in your papers, not that the passage fully supports the sentence. - Line the papers up in a comparison table. Compare studies side by side, with citations, to see where they agree and where they differ. The papers behind those disagreements, and any population no paper covers, are the ones to move into your second and third passes. - Check your own paragraph. When you write a paragraph of your proposal’s literature review, paste it in and each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover that claim, which is a cue to search wider, not proof that a gap exists in the literature. The reading decisions stay yours. Litrevu finds, lines up and checks the evidence in your papers; you decide which papers matter, what the gap is and how to argue it, and you write the proposal. Many universities allow AI for reading and searching sources but not AI-written text in submitted work, so check your institution’s policy and declare how you used any AI tool. Here is the shape of a cited answer, shown as a format illustration with placeholders rather than real output: Question: What limitation does each study state about its sample? Answer (format illustration): (Author, Year) states that its sample was drawn from a single [setting], which limits how far the findings generalise [1]. (Author, Year) reports [limitation] [2]. The papers in your library do not say whether [population] was studied. [1] and [2] open the highlighted passage in each PDF. ## Frequently asked questions ## How long should it take to read a research paper? A first-pass read of a research paper takes about 5 to 10 minutes, a careful second pass up to an hour, and a full critical third pass about 4 to 5 hours for a beginner, according to Keshav's three-pass method (2007). Most papers in a research proposal library only need the first or second pass. ## How many papers should I read before writing a research proposal? There is no fixed number of papers to read before writing a research proposal, and none of the reading guides cited in this article sets one. S. Keshav's 2007 literature survey method starts from three to five recent papers and follows the citations and authors that keep recurring. Your supervisor or department guidelines are the best guide to how many sources your proposal should cite. ## Is it OK to read only the abstract of a research paper? Reading only the abstract is enough to decide whether a research paper is relevant, and university guides from Vanderbilt and Cambridge both start there. It is not enough to cite the paper's methods or results in a research proposal. Before you rely on a paper's findings, read at least its methods and results in a second pass. ## What is the fastest way to read a research paper? The fastest reliable way to read a research paper is a first pass: the title, abstract and introduction, the section headings, the conclusions and a glance at the references, which Keshav (2007) says takes about five to ten minutes. Speed-reading does not help much, because Rayner and colleagues (2016) found a trade-off between reading speed and accuracy. ## Which section of a research paper is hardest to read? The methods and results sections are the hardest parts of a research paper for inexperienced readers, according to a 2017 PLOS ONE survey of 260 biological sciences students and researchers by Hubbard and Dunbar. The same study found that inexperienced readers undervalued the results section and critical interpretation of data. ## What should you do next with the papers for your proposal? If you already have a folder of PDFs for your proposal, the next step is a first pass on each one and a row in your matrix for every paper that survives. To run those first-pass questions across your own papers and open every cited passage, you can try Litrevu on your own papers . Free to start, no credit card required. ## Related Guides - How to Write a Research Proposal: 7 Sections + Template - How to Write a Literature Review for a Research Proposal (2026 Guide) - How to Use AI to Find a Research Gap in Your Own Papers - How to Screen 500 Abstracts Without Reading Every One (2026) --- # How to Compare Your Findings With Previous Studies + Phrases URL: https://litrevu.com/blog/compare-findings-with-previous-studies-discussion Category: Writing Sections Published: 2026-10-26 Summary: Compare each finding with the most relevant earlier studies: say whether it agrees, partly agrees or contradicts them, then explain why. Steps and phrases. Writing Sections ## How to Compare Your Findings With Previous Studies + Phrases By Jessica McLaren · 26 October 2026 · 10 min read To compare your findings with previous studies, take each main finding in turn, cite the most relevant earlier studies on the same question, and say plainly whether your result agrees with them, partly agrees or contradicts them. Then explain any difference by population, setting, method or measure, and if you cannot find a reason, say so. Comparing your findings with previous studies is the part of a discussion section where you place each of your results next to the published results on the same question, state how they relate, and give the most plausible reason for any difference. The comparison tells the reader what your study adds to what was already known. Guideline or source What it asks the discussion to do Applies to Docherty and Smith, BMJ (1999) Discuss “strengths and weaknesses in relation to other studies, discussing particularly any differences in results” (point 3 of a 5-part structure) Medical and health papers APA JARS-Quant, Table 1 (2024) “Discuss similarities and differences between reported results and work of others” Quantitative psychology and social science APA JARS-Qual, Table 1 “Identify similarities and differences from prior theories and research findings” Qualitative research STROBE checklist, item 20 Interpret results considering “results from similar studies, and other relevant evidence” Observational studies CONSORT 2025 checklist, item 29 of 30 “Interpretation consistent with results, balancing benefits and harms, and considering other relevant evidence” Randomised trials Ghasemi et al., Int J Endocrinol Metab (2019) The number of references in the discussion “ranges between 10 - 20” Biomedical papers ## Where does the comparison with previous studies go in a discussion section? In the discussion structure Docherty and Smith proposed in the BMJ in 1999, the comparison with previous studies comes third: after the statement of principal findings and the study’s own strengths and weaknesses, and before the meaning and implications. The BMJ structure has five parts: - Statement of principal findings - Strengths and weaknesses of the study - Strengths and weaknesses in relation to other studies, discussing particularly any differences in results - Meaning of the study: possible mechanisms and implications for clinicians or policymakers - Unanswered questions and future research You do not have to keep the comparison in one block. The University of Guelph’s Writing in the Sciences guide notes that “interpretations and comparisons to other studies are often integrated”: you discuss the meaning of one result, compare it to the literature, then move to the next. In a thesis chapter with several research questions, try one subsection per finding, with the comparison inside each. ## What do reporting guidelines say about comparing results with other studies? The main reporting guidelines for quantitative, qualitative, observational and trial research all ask the discussion to relate the results to earlier work, so the comparison is an expectation, not a stylistic choice. APA JARS-Quant asks you to “Discuss similarities and differences between reported results and work of others”, and APA JARS-Qual asks you to say whether findings are “challenging, elaborating on, and supporting prior research or theory”. In health research, STROBE item 20 asks for “a cautious overall interpretation” that considers “results from similar studies”, and item 29 of the 30-item CONSORT 2025 statement (Hopewell et al., BMJ 2025;389:e081123) asks trials to consider “other relevant evidence”. Where these sources differ in emphasis, follow the guideline for your study design, or the one your supervisor or target journal names. ## How do you compare your findings with previous studies, step by step? You compare your findings with previous studies by working one finding at a time, through the same six steps. - List your main findings. One sentence each, using only what your results section reports. - Pick the comparison studies for each finding. Go back to your literature review and choose the studies that asked the same question. Prefer the most relevant and best-quality ones; Ghasemi et al. call comparison with low-quality or predatory journals “contextually meaningless”. - Line up what each study did. For each one, note the population, setting, design, measure and result. A literature review matrix works well for this. - Label the relationship. Agrees, partly agrees, contradicts, or no comparable study. Agreement needs a brief statement; a contradiction needs an explanation. - Explain the differences. Check the matrix for a difference in sample, setting, method or measure that could account for the result. - Say what it means. Close each comparison with what your result adds: it confirms, extends, narrows or challenges what was known. Steal this check: can a reader tell, from your paragraph alone, which studies you agree with and why the others differ? If not, keep going. ## What should you write when your findings agree, partly agree or contradict previous studies? What you write depends on the relationship: agreement needs one or two sentences, partial agreement needs the condition under which the results match, and a contradiction needs an explanation. A missing comparison needs an honest statement and a check that you searched widely enough. Relationship What to write What to check first Agrees State it briefly and cite the studies Whether the studies share a design or bias with yours Partly agrees Say where results match and where they diverge Which population, setting or measure separates the two Contradicts Report the difference, then the most plausible reasons Sample, measures, test sensitivity, design, bias No comparable study Say no directly comparable study was found Whether your search covered other databases and languages ## How do you write it when your findings agree with previous studies? When your findings agree with previous studies, say so briefly and cite them; Ghasemi et al. (2019) advise that consistent results be stated “briefly and simply”. One or two sentences per finding will do. Do not treat agreement as proof. Ghasemi et al. point out that agreement “may only be due to shared biases”, so check whether the studies you cite used the same design or measure as yours; agreement across different designs is stronger evidence. ## How do you explain findings that contradict previous studies? When your findings contradict previous studies, report the contradiction directly and then give the most plausible explanations, drawn from real differences between the studies. A different result “does not necessarily indicate that there is a mistake or error”, according to Ghasemi et al. (2019) . Ghasemi et al. list differences in the sensitivity or specificity of the tests used, differences in populations, and different effects of bias. Add setting, time period or outcome definition if your matrix shows a difference there. Docherty and Smith (1999) put it simply: “discuss why you might have reached different conclusions from others”, without speculating beyond the evidence. If you cannot find a reason, do not invent one. Ghasemi et al. are explicit: “If there is no reason for differences in findings, it should be clearly acknowledged.” Saying “the reason for this difference is unclear and would need a study designed to test it” is honest and gives you a future research point. ## What if no previous study is directly comparable to yours? If no previous study is directly comparable, say that you found none and name the nearest studies you did find, with how they differ from yours. Avoid claiming your study is the first; Ghasemi et al. (2019) warn that statements such as “for the first time” may “inflate the actual worth of the results”. Before you write “no previous study”, check that your search was wide enough. Ghasemi et al. note: “It is always possible that the finding has been reported in a language other than English.” Run your search again in a second database, and try citation chaining from the closest paper you have. ## What phrases can you use to compare your results with other studies? Use phrases that name the relationship (consistent with, partly consistent with, in contrast to) and then the reason. Ghasemi et al. (2019) recommend the present tense when the subject is “study” or “results”, and the present perfect or past tense when the subject is “we”. Steal these, and fill in your own studies. The authors and years below are placeholders, not real studies: - Agrees: “This finding is consistent with (Author, Year) and (Author, Year), who reported the same pattern in [population].” - Partly agrees: “The direction of the effect matches (Author, Year), but the association here is weaker, possibly because [difference in sample or measure].” - Contradicts: “In contrast to (Author, Year), this study found no association between [X] and [Y]. One explanation is that (Author, Year) measured [Y] by [method], whereas this study used [method].” - Extends: “Earlier studies examined [population A] (Author, Year); the present results suggest the pattern also holds for [population B].” - Unexplained: “The reason for the difference from (Author, Year) is not clear from the available evidence.” ## How many studies should you cite when comparing your findings? Ghasemi et al. (2019) give 10 to 20 references as the usual range for a journal article’s discussion section, and advise discussing the most relevant studies rather than every paper in the field. That figure is for journal articles. A thesis or dissertation chapter that covers several findings is not bound by it, but the same rule holds: cite the studies that asked your question, not every study you read. Your department’s guidance overrides any general figure; for the discussion’s own length, see how to write a discussion section . ## Is comparing findings in a thesis discussion different from a journal article? Comparing findings in a thesis or dissertation discussion follows the same logic as in a journal article, but the comparison points back to your own literature review chapter. The University of Westminster’s dissertation guide (UK) describes the discussion as interpreting findings by “comparing and contrasting them with the literature” from your literature review. A practical test: the studies you compare against in the discussion should already appear in your literature review. If a key comparison study is new, add it to the review too. The comparison step is the same whether your institution calls the document a thesis or a dissertation. ## What mistakes do students make when comparing findings with the literature? A common mistake when comparing findings with the literature is leaving out the studies that disagree with you. Ghasemi et al. (2019) list ignoring contradictory literature, distorting it to fit your results, and avoiding unexpected results among the common pitfalls of a discussion. The same paper also warns against summarising the literature again instead of relating it to your results, repeating results in detail, and stressing how unique your study is. The fix is a comparison matrix with the population, setting, design, measure and result of each study: if each comparison sentence traces to one row, you are comparing, not summarising. ## How do I compare my findings with previous studies using an AI assistant for writing backed by sources? You compare your findings with previous studies in Litrevu by adding the studies from your literature review, asking all of them the same questions about your variables, and lining up the answers in a cited comparison table. You then decide what agrees, what contradicts and why. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. - Add the papers you will compare against. Upload PDFs, or paste a PDF link, DOI or arXiv link. Litrevu can also find open-access papers on your topic for you to choose from. - Ask every paper the same questions. For example: “What population and setting did each study use?” and “What did each study find about [X] and [Y]?” Answers cite only your papers, and Litrevu says when your papers do not cover a question. - Compare the papers side by side. Litrevu places the studies in a table with citations, showing where they agree and where they differ. - Open the citations. Each one opens the highlighted passage in the source PDF, so you check the result and method yourself. - Check your own paragraph. Paste a discussion paragraph you wrote, and each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover that claim: a cue to search wider, not proof that no previous study exists. The shape of a comparison row, as a format illustration only: Study Population and setting Measure Finding on [X] Relation to your result (Author, Year) [as reported, cited] [as reported, cited] [as reported, cited] You decide You make the judgement and write the discussion. Many universities do not allow AI-written text in submitted work, so check your institution’s policy and declare how you used AI. ## Where can you line up your own papers against your results for free? You can add the studies from your literature review to Litrevu and compare them side by side on your dashboard, with every answer cited to the passage in your own papers. Add your papers and compare them . Free to start, no credit card required. ## Frequently asked questions about comparing findings with previous studies ## How do you compare results with other studies in a discussion? Take one finding at a time, cite the most relevant earlier studies on the same question, and say whether your result agrees, partly agrees or contradicts them. Then explain any difference by population, setting, method or measure. If there is no clear reason for a difference, say so. ## What do you write if your results are consistent with previous studies? State the agreement in one or two sentences and cite the studies, for example "This finding is consistent with (Author, Year)." Ghasemi et al. (2019) advise stating consistent results briefly and simply. Check whether the studies share a design or measure with yours, because Ghasemi et al. note that agreement may only be due to shared biases. ## What if my findings contradict previous research? Report the contradiction directly, then give the most plausible explanations from real differences between the studies, such as population, test sensitivity or bias. Ghasemi et al. (2019) note that a different result does not necessarily indicate a mistake or error. If you cannot find a reason, acknowledge that clearly rather than speculating. ## How many references should a discussion section have? Ghasemi et al. (2019) give 10 to 20 references as the usual range for a journal article's discussion section. That figure is for journal articles, not thesis chapters, and your department's guidance takes priority over any general figure. Cite the studies that asked your question rather than every paper you read. ## Should the studies in my discussion be in my literature review? Yes, in a thesis or dissertation the studies you compare against should normally already appear in your literature review chapter. The University of Westminster's dissertation guide describes the discussion as comparing and contrasting findings with the literature from your review. If a key comparison study is new, add it to the review as well. ## Related Guides - How to Write a Discussion Section (Without Repeating Your Results) - What to Do When Two Studies Contradict Each Other in Your Literature Review (2026) - How to Synthesize Sources in a Literature Review (Step-by-Step, With Examples) - How to Write a Results Section (With Tables, Figures & Examples) --- # How to Use AI to Find a Research Gap in Your Own Papers URL: https://litrevu.com/blog/how-to-use-ai-to-find-a-research-gap Category: AI & Research Writing Published: 2026-10-22 Summary: Use AI to find a research gap: compare your papers in a table, ask where findings conflict and what none cover, then verify every gap in the passages. AI & Research Writing ## How to Use AI to Find a Research Gap in Your Own Papers By Wasim Ghoor · 22 October 2026 · 11 min read To use AI to find a research gap, add the core papers on your topic to an AI tool that cites only those papers, line them up in a table by population, setting, method and finding, then ask where the findings conflict and which populations, settings or outcomes no paper covers. Treat every answer as a candidate gap: open the cited passages, then search the wider literature before you claim it, because a gap in your library is not yet a gap in the field. A research gap is “a topic or area for which missing or inadequate information limits the ability of reviewers to reach a conclusion for a given question”, in the definition used by the US Agency for Healthcare Research and Quality ( Robinson, Saldanha and McKoy, 2011, AHRQ ). Finding one means showing what the published studies leave unanswered, with the studies to prove it. ## What are the steps to find a research gap with AI? Finding a research gap with AI takes six steps: gather the core papers, add them to one library, compare them in a table, ask targeted questions, read the cited passages, and test each candidate gap against the wider literature. Think of the AI as a research partner who has read every paper on your desk and nothing else. It can tell you where those papers disagree and what they leave out; it cannot tell you what the rest of the field has done. - Gather the core papers. Start from a structured database search, not a chatbot: Duke University Libraries’ guide notes that, because of coverage bias, ChatGPT “does not replace searching library databases, such as Web of Science or PubMed” ( Duke University Libraries ). A written search string makes the set repeatable; the free search string builder and the guide on how to write a search strategy set one up. - Add them to one library. Use a tool that cites only the papers you add and shows the passage behind each answer, so every claim can be checked. - Compare the papers in a table. Put each study in a row and use the columns population, setting, method, outcome and main finding. The literature review matrix gives a blank template. - Ask targeted questions. Ask where findings disagree, which populations and settings appear, which outcomes are measured, and what limitations and future research each paper states. - Read the cited passages. Open every passage behind a candidate gap. An AI summary can misread a paper; the passage cannot. - Test the gap against the wider literature. Search the databases again for the specific gap, and check for registered or published reviews on the question before you write “no study has examined”. ## What types of research gap can AI help you spot? AI can help you spot the four kinds of research gap that the AHRQ framework names: insufficient or imprecise information, biased information, inconsistent results, and evidence that is not the right information for the question ( Robinson, Saldanha and McKoy, 2011 ). The same framework describes where a gap sits using PICOS: population, intervention, comparison, outcomes and setting. Each gap type maps onto a question you can put to your papers. Gap type (AHRQ) What it means Question to ask your papers What you still check yourself Insufficient or imprecise information Too few studies, or results too uncertain to conclude “How many of these studies measure [outcome], and how large are their samples?” Whether larger studies exist outside your library Biased information The studies that exist have design weaknesses “What limitations does each study report about its design or sample?” Your own appraisal of each study’s quality Inconsistent results Studies on the same question disagree “Where do these studies reach different findings on [question]?” Whether the disagreement comes from different populations, methods or measures Not the right information Studies exist but miss the population, setting or outcome that matters “Which populations and settings do these studies cover?” Whether the missing population matters enough to justify a study PICOS makes the “not the right information” row concrete. If every study in a comparison table sampled urban university students, a rural or part-time population is a candidate “not the right information” gap. For more worked examples by gap type, see how to find a research gap , and for disagreements between studies, see what to do when two studies contradict each other . ## Which AI tools help with which part of finding a research gap? AI tools for finding a research gap split into two groups: discovery tools that search the published literature for papers, and tools that read and compare the papers you have already chosen. Gap-finding needs both. Discovery decides whether the library is complete enough; reading decides what the library shows. Tool What the vendor says it does Where it fits in gap-finding Elicit Searches “over 138 million academic papers”, automates “screening and data extraction of systematic reviews”, and also works with uploaded documents ( elicit.com ) Finding papers at scale and extracting data across a large set, including for systematic reviews Research Rabbit Helps you “find related papers, build citation maps, and track research trends” ( researchrabbit.ai ) Seeing how papers connect and spotting related work your search missed Consensus Describes itself as “an AI academic search engine for peer-reviewed literature” ( consensus.app ) Searching the published literature on a specific question Litrevu Answers questions about the papers in your library, cites the passage behind each answer, compares papers in a cited table and checks your own paragraphs against them ( how it works ) Comparing your chosen papers, finding where they conflict and what they do not cover, and checking your gap statement Elicit, Research Rabbit and Consensus are stronger than Litrevu at discovery across the published literature, and Elicit is built for systematic-review screening at scale. Litrevu’s part is the reading and checking once the papers are chosen. To check whether a question is already answered or registered as a review, see which AI tool tells you if your research question has already been answered . ## How do you check that an AI-suggested research gap is real? An AI-suggested research gap is real only when the cited passages say what the AI reported and a wider search of the literature also finds nothing that fills it. Duke University Libraries’ guide to AI in literature reviews warns that “Generative AI tools can produce inaccurate citations and summaries” and that users must “verify all information independently” ( Duke University Libraries, updated September 2026 ). Use three checks before a gap goes into a proposal: - The passage check. Open each citation behind the gap and read the sentence in the paper. If the passage does not support the summary, drop the gap. - The library check. Ask whether the gap reflects the field or only your selection of papers. A library of ten studies from one country will show “no studies in other countries” whether or not those studies exist. - The literature check. Search the databases again with terms for the specific population, setting or outcome. For a gap across a whole field, a scoping review is the formal method: Munn and colleagues list “identify knowledge gaps” among the main reasons to run one ( Munn et al., 2018, BMC Medical Research Methodology ). The differences between review types are covered in scoping vs systematic vs narrative reviews . ## How do I find a research gap with an AI assistant for writing backed by sources? To find a research gap with an AI assistant for writing backed by sources, add your papers, compare them in a cited table, ask where they conflict and what they leave out, then check your own gap paragraph against them. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Here is the workflow in Litrevu, using only the steps on the how it works page: - Add your papers. Upload PDFs, paste a PDF link, a DOI or an arXiv link, paste a paper’s text, or let Litrevu find open-access papers on your topic and pick the ones to keep. - Compare papers. Line the studies up side by side in a table, with citations, to see where they agree and where they differ by population, method and finding. - Ask the papers. Ask “where do these studies disagree about [outcome]?” or “which populations do these studies cover?”. Answers cite only your papers, and Litrevu says when your papers do not cover a question. - Open each citation. Every citation opens the highlighted passage on the page of the PDF it came from, with the paper’s title, authors and year. - Check your gap paragraph. Paste the paragraph where you state the gap. Each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. A claim check on a gap paragraph looks like this (a format illustration with placeholders, not real output): Claim in your gap paragraph Result Passage [Studies of X report conflicting effects on Y] Supported (Author, Year) and (Author, Year), highlighted passages [Most studies sample population A] Partly supported (Author, Year), highlighted passage [No study has examined population B] Not in your papers None in your library “Not in your papers” means your library does not cover that claim. It is a prompt to search wider, not proof that no study exists. You decide which gap matters and you write the argument for it. ## Is it acceptable to use AI to find a research gap? Using AI to find a research gap is acceptable when your institution’s rules for that piece of work allow AI for research, you verify what the AI reports, and you declare how you used it; the decision about which gap to pursue stays yours. The rules are set per institution and often per assessment. At University College London (UK), each assessment is placed in one of three categories: “GenAI tools cannot be used”, “GenAI tools can be used in an assistive role”, or “GenAI has an integral role”, and students must acknowledge how they used GenAI in assessed work ( UCL, three categories of GenAI use, read October 2026 ). Duke University Libraries’ guide adds that ChatGPT can help with “suggesting gaps in the research” but should be used “as a complement, not a replacement” for database searching ( Duke University Libraries ). How the line usually falls for a research gap: - Usually fine where AI use is permitted: using AI to find papers, compare them and check your claims against them, then declaring that use. - Grey, so ask your supervisor first: using AI-generated wording for the gap statement in a proposal, even after editing. - Not acceptable: claiming a gap you have not verified in the sources, or submitting AI-written text as your own work where the assessment forbids it. The ethics of AI in research writing covers the wider question, and the free AI disclosure statement generator gives you wording to declare your use. ## How do you turn a research gap into a research proposal? A research gap becomes a research proposal in three moves: state the gap in one sentence with its citations, turn it into a research question your study can answer, and argue why answering it matters. A gap statement such as “studies of X disagree on Y, and none of them sample population B” leads to a question about Y in population B. - Gap statement and question: how to write a research question shows how to narrow the gap into an answerable question. - Problem and rationale: how to write a problem statement and how to write a research rationale explain why the gap matters. - Literature section: how to write a literature review for a research proposal shows how to present the gap without overclaiming. - The whole document: how to write a research proposal puts the sections together. ## Frequently asked questions about using AI to find a research gap ## Can AI find a research gap for me? AI can point to candidate research gaps in the papers you give it, such as conflicting findings or populations no study covers, but it cannot confirm a gap in the whole field. Confirming a gap needs the cited passages read and a wider search of the literature. Deciding which gap is worth a study stays with you and your supervisor. ## Can ChatGPT find research gaps? Duke University Libraries' guide says ChatGPT can help with "suggesting gaps in the research" but should be used as a complement to database searching, not a replacement. The same guide warns that generative AI tools can produce inaccurate citations and summaries, so every suggested gap needs checking against the actual papers. ## What are the types of research gaps? The AHRQ framework names four reasons a research gap exists: insufficient or imprecise information, biased information, inconsistent or unknown consistency of results, and not the right information. It describes where a gap sits using PICOS: population, intervention, comparison, outcomes and setting. ## How do I know if a research gap is real? A research gap is real when the passages behind it say what was reported and a fresh database search for the specific population, setting or outcome finds nothing that fills it. Also check for published or registered reviews on the question. A gap that appears only because your library is small is not a real gap. ## What questions should I ask AI to find a research gap? Ask where the studies disagree on a finding, which populations and settings they cover, which outcomes they measure, and what limitations and future research each study states. Ask each question of the whole set of papers at once, then open the cited passages behind every answer. ## Is using AI to find a research gap cheating? Using AI to find and compare sources is not cheating where the assessment permits AI use, you verify what it reports, you make the decisions yourself and you declare the use. Rules are set per institution and often per assessment: University College London, for example, puts each assessment in one of three GenAI categories and requires students to acknowledge their use. Check your assessment's rules and ask your supervisor. ## Where should you start looking for your research gap? Start with the papers you would cite in your proposal: put them in one library, compare them side by side, and ask where they disagree and what they leave out, then verify every candidate gap in the passages and the wider literature. To do that with every answer cited to the passage it came from, try Litrevu with your own papers . Free to start, no credit card required. ## Related Guides - How to Find a Research Gap (Step-by-Step, With Examples) - How to Write a Research Proposal (7-Section Template + Examples) - How to Write a Literature Review for a Research Proposal (2026 Guide) - Which AI Tool Tells You If Your Research Question Has Already Been Answered? (2026) --- # How to Pilot an AI Research Assistant Within Your University's AI Policy (2026) URL: https://litrevu.com/blog/pilot-ai-research-assistant-university-ai-policy Category: AI & Research Writing Published: 2026-10-19 Summary: How a university pilots an AI research assistant under its own AI policy: approval, feature mapping, cohort choice, student records and the measures that decide it. AI & Research Writing ## How to Pilot an AI Research Assistant Within Your University’s AI Policy (2026) By Samuel de Bruyn · 19 October 2026 · 10 min read A university pilots an AI research assistant inside its own AI policy by doing five things in order: putting the tool through the security and privacy approval the institution already runs, writing down which features count as permitted use under the rules already in force, choosing a small cohort with a named academic owner, telling students what to declare and keep, and agreeing the measures that will decide whether the pilot continues. None of that needs a new AI policy. It needs the existing policy applied to one named tool, in writing, before any student uses it. An AI tool pilot inside a university AI policy is a time limited, formally approved trial in which a named group of students and staff use one tool under the institution’s existing rules on academic integrity, disclosure and data protection, with the measures for judging it agreed before the trial starts. ## What does a pilot inside your AI policy look like? A pilot inside an AI policy looks like five written decisions with a named owner against each: who approved the tool, which features are permitted, who is in the cohort, what students must declare, and what will be measured. Recording those five decisions before the tool is switched on is what separates a pilot from students quietly using a tool anyway. Jisc’s own pilot of an AI student support platform shows the shape. That project ran between August and December 2024 with twelve institutions taking part, eight further education colleges and four higher education institutions, among them Bath Spa University, Liverpool John Moores University and the University of Westminster. One semester, a defined set of participants, a stated set of questions, a written report at the end. A pilot that starts with "let’s see how it goes" produces anecdotes instead, and anecdotes cannot be taken to a learning and teaching committee. What to ask a supplier beforehand is a separate question, covered in our guide to what universities should expect from an AI research assistant . Source: Jisc National Centre for AI, LearnWise end of pilot report, 28 April 2025 . ## Who has to approve an AI tool before students can use it? In most universities the academic owner cannot approve a tool alone, because the sign off sits with IT security and privacy too. The University of Auckland is explicit about the sequence for research tools: all digital applications, services and systems undergo a security assessment by Digital Services, a Privacy Impact Assessment comes first where personal information is involved ("Complete a PIA before collecting or using personal information with generative AI tools"), and researchers are told to plan for the University approval process to take three to five weeks. Auckland adds that ethics applications and IT procurement cannot complete until a tool is confirmed as University approved. Data protection law sets the floor underneath that process. The University of the Witwatersrand’s AI policy document (G-C-2026-030) states in section 4.5, on data security, that "Sensitive and / or personal data should not be entered into public AI systems", and section 4.2 holds that the person using the tool "remains fully responsible for the originality, accuracy, and integrity of their work". As of October 2026, three to five weeks is the planning number that matters most here. A pilot aimed at a cohort starting in February has to begin its paperwork in December. Sources: University of Auckland, generative AI tools for research , University of the Witwatersrand AI Policy Document G-C-2026-030 . ## How do you map a tool’s features against your AI policy? Map the tool feature by feature rather than as a single yes or no, because one product usually spans several categories your policy already treats differently. The method is a four column table, filled in by the academic owner and signed off by whoever owns academic integrity: each row names a feature, what the student is actually doing, the question the existing policy already answers about it, and the record kept if it is permitted. Feature What the student is actually doing Question your existing policy answers Record kept if permitted Finding papers Searching for literature to read Is search assistance permitted, and does it need declaring? Search terms and dates run Summarising uploaded papers Reading support on sources the student chose Is reading support permitted on the student's own sources? Which papers, which tool Answering questions with cited passages Locating and checking what a source says Does a citation to the student's own PDF satisfy your referencing rules? The passage behind each claim Drafting text Producing prose that could be submitted Is drafted text permitted, and at what level of declaration? Prompt log and dated drafts Checking citations Verifying that references exist and are correct Is verification permitted without declaration? The checker output Stellenbosch University’s Faculty of Science guidelines for students, version January 2026, provide a sourced way to label the rows. The guidelines split use into weak and strong: tools in the weak category "do not necessarily need to be declared, although declaration is recommended", while strong use "should be fully disclosed, including the purpose for which it was used" and "counts as plagiarism/AI-giarism if not declared". The guidelines also give the tie breaker for rows you cannot classify: "When in doubt, treat the use as a strong use to be declared." For a published scale rather than a local one, the revised AI Assessment Scale by Mike Perkins, Jasper Roe and Leon Furze, dated December 2024, sets out five levels: No AI, AI-Assisted Planning, AI-Assisted Task Completion, Full AI and AI Exploration. Its authors are clear that institutions "should adapt it to their specific contexts and needs". Sources: Stellenbosch University Faculty of Science, Guidelines for using GenAI tools in Learning and Assessment, January 2026 , Perkins, Roe and Furze, The AI Assessment Scale Revisited, December 2024 . ## Who should be in the pilot cohort, and how long should it run? Pick a cohort with a shared deadline and a single supervisor or programme coordinator, and run the pilot across a full semester rather than a few weeks. A cohort with a shared deadline gives comparable work to look at, and a single academic owner means someone can answer questions in week three instead of referring them to a committee. The argument for a full semester comes out of a pilot that was shorter. Jisc ran an AI student support platform across twelve institutions between August and December 2024, and reported that interaction levels stayed limited, which the end of pilot report attributes largely to the short duration of the project. Participants also asked for clearer communication about offboarding at the end. By the close, eight of the twelve institutions had committed to or were exploring paid subscriptions. The honest caveat is that the tool there was a student support platform, not a research assistant, so what carries over is the pilot design rather than the product. Size matters less than comparability. One postgraduate cohort working to a single submission date will tell you more than several hundred volunteers scattered across faculties, because you can read a sample of the finished work and ask one supervisor what changed. Source: Jisc National Centre for AI, LearnWise end of pilot report, 28 April 2025 . ## What should students be asked to keep as a record? Ask for three things: a declaration in the submission itself, a log of prompts and outputs available on request, and dated drafts kept until after feedback. Those three cover almost every disclosure rule currently in force, and asking for them from day one costs students very little. The University of Suffolk’s guidance shows what that looks like written down. From the 2026/27 academic year, students there must include an AI declaration as part of every assignment submission, and a declaration is required even when no AI was used. Suffolk’s templates are plain: "I used [insert tool name] to [insert description of AI function]." Transcripts and prompt logs go in an appendix or are made available on request, and students are advised to keep notes, supplementary materials and draft versions until after they have received feedback. For postgraduate researchers, Stellenbosch’s Faculty of Science guidelines go further and treat the log as data: "detailed records of the prompt history should be downloaded and saved as research data." Wits asks for declarations to be made to the University through a comprehensive template, so a pilot there inherits a disclosure format rather than inventing one. Students who have never written one can start from our guide to writing an AI use disclosure statement , and the dated drafts Suffolk asks for are the evidence described in how to prove you wrote your own work . Sources: University of Suffolk, Acknowledging AI use, updated 16 September 2026 , Stellenbosch University Faculty of Science guidelines, January 2026 , Wits AI Policy Document G-C-2026-030 . ## How do you judge whether the pilot helped? Agree three measures before the pilot starts: citation accuracy in a sample of the work, supervisor judgement of whether the students read more carefully, and a short student survey. Jisc evaluated its own AI pilot with focus groups across all participants, institutional usage statistics and an end user survey distributed where possible, which is a reasonable template to copy. Detection software is not one of the three, for reasons set out in why process based evaluation beats AI detection . Citation accuracy is the measure that can be checked rather than felt, and there is a published method for it. In a study in JMIR Mental Health on 12 November 2025, Jake Linardon and colleagues extracted 176 citations generated by GPT-4o across six literature reviews and verified each against Google Scholar, Scopus, PubMed, WorldCat and publisher databases. Thirty five of the 176, 19.9%, were fabricated outright, and among the 141 real citations, 64, or 45.4%, contained errors. A pilot can run a smaller version of that check: pull a sample of references from the work students produced and verify each against a database. Where a tool cites only the PDFs a student uploaded, the check is different and faster: open each citation and read the passage behind it. The claim and the passage either match or they do not, and a supervisor can test that in minutes. Our comparison of the free tools that check whether references are real sets out what each database catches. One caution about published pilot results, including the hopeful ones. The pilot implementation of the AI Assessment Scale at British University Vietnam, reported by Leon Furze, Mike Perkins, Jasper Roe and Jason MacVaugh in the Australasian Journal of Educational Technology on 16 October 2024, states that results "indicate a significant reduction in academic misconduct cases related to GenAI". That is a direction, not a figure you can transplant into your own business case, so treat it as a reason to count misconduct cases yourself. Sources: Linardon et al., JMIR Mental Health, 12 November 2025 , Furze, Perkins, Roe and MacVaugh, Australasian Journal of Educational Technology 40(4), 16 October 2024 , Jisc LearnWise end of pilot report . ## What should a pilot never claim about a tool? A pilot should never describe a tool as compliant or approved in general terms, because institutional approval is specific, conditional and time limited. The University of Auckland states it bluntly: "Previous or current use of a tool does not mean it is currently University approved." Auckland also records that Digital Services’ approval runs for a period of time aligned with the University’s data classification, and may carry conditions such as being limited to one research project or to prescribed settings. Borrow that phrasing for the pilot’s own paperwork. "Approved for this cohort, for this purpose, until this date" is a sentence a university can defend. "Approved" on its own outlives the conditions attached to it, and tends to reappear in a prospectus two years later. The same restraint applies to suppliers, including us. No supplier can tell a university that a product meets that university’s AI policy, because the policy is the institution’s to interpret and the use is the student’s to declare. Source: University of Auckland, generative AI tools for research . ## Frequently asked questions ## Do we need an AI policy before we can pilot an AI research tool? No. A pilot needs the rules you already have, applied to one named tool and written down. Most universities already hold policies on academic integrity, plagiarism, data protection and IT security, and the pilot mapping document is where those rules meet a specific product and a specific cohort. A pilot is also one of the better ways to find out what a standalone AI policy should eventually say. ## Who signs off an AI tool, the academic owner or IT? Both, in most institutions, with privacy alongside them. At the University of Auckland, digital applications undergo a security assessment by Digital Services, a Privacy Impact Assessment is required before personal information is used with generative AI tools, and researchers are advised to plan for three to five weeks. Treat the academic case and the security and privacy review as parallel tracks starting the same day. ## What should students declare during a pilot? Which tool they used, what they used it for, and where the output appears in the work. The University of Suffolk's template wording is "I used [insert tool name] to [insert description of AI function]", with transcripts or prompt logs supplied in an appendix or on request. Stellenbosch's guidelines add the default to apply when a case is unclear: "When in doubt, treat the use as a strong use to be declared." ## How do we check whether a tool's citations are real? Take a sample and verify each reference against a database such as Crossref, Scopus, PubMed or Google Scholar, the method used in the published literature on citation fabrication. Where a tool cites only the papers the student uploaded, open each citation and compare the claim against the passage it points to. A supervisor can run both checks on a handful of submissions without special software. ## Can a pilot tell us whether students learned more? Not on its own, and claiming otherwise will not survive a committee. A single semester pilot can measure citation accuracy, usage, supervisor judgement and student-reported experience, which is enough to decide whether to continue, extend or stop. Learning gains need a comparison group, which is a separate piece of work from a procurement pilot. ## Where Litrevu Fits in a Pilot Like This Litrevu is an AI assistant for writing backed by sources. It reads the papers a researcher adds, answers questions about them, and cites the passage behind each answer. For a pilot the part that matters is checkability: a student adds their own papers, and every citation points back to a passage in one of them, so a supervisor can open a claim and read the sentence it came from. Our position with universities, said plainly: we would rather shape Litrevu around your policy than ask you to fit around ours. Today that means agreeing together which features your students use during a pilot and which they do not, and keeping that mapping in your documentation rather than ours. Litrevu can also draft cited text, and many universities do not allow AI-written text in submitted work even after editing, so drafting is a row in your mapping table like any other. Here is the shape of a cited answer, so you can see what a supervisor would be checking: Question asked of the uploaded library: What do these papers say about [topic]? Answer: [Statement of what the uploaded papers say] (Author, Year). [Second statement] (Author, Year). Where the uploaded papers do not cover a question, Litrevu says so. Opening the citation (Author, Year) shows: [the passage from the uploaded PDF, word for word, with the paper it came from] That block is a format illustration, not output from a real query. The bracketed text marks where content from a researcher’s own papers appears, and it deliberately contains no findings, authors or numbers. As of October 2026, Litrevu is free to start with 25 messages and 2 drafted sections every 30 days , no card needed, which is enough for a librarian or supervisor to upload a few papers and judge the citation behaviour before committing a cohort to anything. Try It on Your Own Papers ## Related Guides - The Ethics of AI in Research Writing: What Universities Should Expect From an AI Research Assistant - How to Write an AI-Use Disclosure Statement for Your Assignment - AI Detection Is Dead. Universities Are Switching to Process-Based Evaluation. - Best Tools to Check If Your References Are Real - Litrevu for Universities --- # What to Do When Two Studies Contradict Each Other in Your Literature Review (2026) URL: https://litrevu.com/blog/conflicting-findings-in-a-literature-review Category: Literature Review Published: 2026-10-15 Summary: Two studies disagree? Report both, then explain the gap: Cochrane's three kinds of variability, GRADE's inconsistency criteria, and how to write the paragraph. Literature Review ## What to Do When Two Studies Contradict Each Other in Your Literature Review (2026) By Wasim Ghoor · 15 October 2026 · 10 min read When two studies in your literature review contradict each other, you do not pick a winner and quietly drop the other paper. You report both results, then explain the disagreement by naming what differs between the two studies: who was studied, how the outcome was measured, how each study was designed, and how much weight each result can carry. Those first three checks come straight from the Cochrane Handbook for Systematic Reviews of Interventions (version 6.5, 2024), which separates variability in participants and outcomes from variability in design and measurement in section 10.10.1. The disagreement is a finding in its own right, and writing it up as one is most of the difference between synthesis and a list of summaries. ## What does it mean when two studies contradict each other? Conflicting findings means two or more studies addressing the same question report results that point in different directions, or report effects of very different size. The Cochrane Handbook for Systematic Reviews of Interventions (version 6.5, 2024) splits the reasons into three kinds of variability in section 10.10.1: clinical diversity, "Variability in the participants, interventions and outcomes studied"; methodological diversity, "variability in study design, outcome measurement tools and risk of bias"; and statistical heterogeneity, "Variability in the intervention effects being evaluated in the different studies". That three way split is the most useful thing a postgraduate student can borrow from systematic review methods, because it turns a vague worry into three concrete questions about the two papers in front of you. Two studies can disagree because they were not really asking the same question, because they were built and measured differently, or because of chance. Source: Cochrane Handbook, chapter 10 , section 10.10.1, read October 2026. ## Do I have to decide which study is right? No. You are not required to declare a winner, and in most literature reviews you cannot. The GRADE Handbook treats this situation as a judgement about the body of evidence rather than about one paper, calling it inconsistency, "an unexplained heterogeneity of results" (section 5.2.2). What you must not do is settle it by counting papers. The Cochrane Handbook classes vote counting based on statistical significance as an unacceptable synthesis method, because such methods "all have serious limitations and can lead to the wrong conclusion", and because "underpowered studies that do not rule out clinically important effects are counted as not showing benefit" (section 12.2.2.1). The same chapter states that "Rules based on subjective decisions or statistical significance are problematic and should be avoided" (section 12.2.1.3). One counting method the Cochrane Handbook does accept is narrower than it first looks: vote counting based on direction of effect, where "each effect estimate is first categorized as showing benefit or harm based on the observed direction of effect alone" and "Neither statistical significance nor the size of the effect are considered in the categorization" (section 12.2.1.3). Table 12.2.a records its limitation plainly, that it is "Less powerful than methods used to combine P values". So tally direction if you tally anything, say that is what you did, and do not present it as a result about significance. Sources: GRADE Handbook , section 5.2.2; Cochrane Handbook, chapter 12 , sections 12.2.1.3 and 12.2.2.1 and Table 12.2.a, read October 2026. ## How do I tell a real disagreement from random noise? Four signals, and the GRADE Handbook lists them together in section 5.2.2: the point estimates vary widely across studies, the confidence intervals show "Minimal or no overlap", the statistical test for heterogeneity returns a low p value (p <0.05), and the I² statistic is large. GRADE also notes a point that is easy to get wrong, that "direction of effect is not a criterion for inconsistency" on its own, since two studies can point opposite ways and still be compatible once the intervals are read. Where a review reports I², the Cochrane Handbook gives a rough guide for meta-analyses of randomised trials in section 10.10.2: Cochrane Handbook rough guide to interpreting I² I² What the Cochrane Handbook says 0% to 40% might not be important 30% to 60% may represent moderate heterogeneity 50% to 90% may represent substantial heterogeneity 75% to 100% considerable heterogeneity The bands overlap, and the same section warns that the thresholds can be misleading, since interpretation also depends on the magnitude and direction of effects and on the strength of the evidence for heterogeneity. For a narrative literature review, those bands are vocabulary for describing what a published meta-analysis found, not a test you run yourself. A low p value on the Chi² test, the handbook says in the same section, "provides evidence of heterogeneity of intervention effects (variation in effect estimates beyond chance)". That phrase, beyond chance, is the test to apply before calling a difference real. Sources: GRADE Handbook , section 5.2.2; Cochrane Handbook, chapter 10 , section 10.10.2, read October 2026. ## How do I work out why two studies disagree? Compare the two studies on four things, in this order, and write down what you find for each one. The first three are the Cochrane Handbook’s own categories from section 10.10.1, and the fourth catches what the first three miss. - Participants, interventions and outcomes studied , which the Cochrane Handbook (version 6.5, 2024) calls clinical diversity: different ages, settings, countries or sampling frames produce different results from an identical design. - The outcome measurement tool , which falls under what the same section calls methodological diversity, because two papers reporting "wellbeing" or "performance" may be measuring different constructs on different scales. - Study design and risk of bias , also methodological diversity, and this is where a structured appraisal earns its place: a named checklist such as CASP gives you a defensible reason to say one result carries more weight, and the walk through is in our guide on how to critically appraise a research paper . - Timing and analysis , including follow up length and how each set of authors handled missing data. One of those four usually explains the gap, and the sentence you write names it. If none of them does, that is still a reportable result, and the honest phrasing is that the difference is not explained by the study characteristics available to you. ## How do I write a paragraph about conflicting studies? Use four moves in order: state the claim both studies speak to, report both results with citations, name the difference that plausibly explains the gap, then say what the disagreement means for your own study. The third move is the one that does the work, and the Cochrane Handbook (version 6.5, 2024) gives you the vocabulary for it in section 10.10.1: variability in participants, interventions and outcomes, or variability in design, measurement tools and risk of bias. Writing those four moves as four sentences produces a paragraph that reads as synthesis rather than summary, which is also the first problem named in 10 common literature review mistakes . Here is the shape of a paragraph that makes all four moves. This is a format illustration with placeholder tokens, not a real result, and the author names, years and findings are deliberately empty: Evidence on [construct] is mixed. (Author, Year) reports a positive association, while (Author, Year) reports none. The two studies measured [construct] with different instruments and recruited from different settings, which is the most plausible source of the difference. For the present study, [construct] is therefore measured with a single named instrument, and the comparison with [other setting] is treated as an open question rather than a settled one. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. When two of your papers disagree, you can ask it to compare them on participants, measures and design, up to 10 papers at a time, and each answer links to the passage it came from, which is the evidence your third move needs. The sentences in your chapter should be ones you wrote yourself. ## How do I show the disagreement in a table? Build a comparison table before you write the paragraph, because the table is what makes the explanation visible. The Cochrane Handbook for Systematic Reviews of Interventions (version 6.5, 2024) is unambiguous on this in the key points of chapter 12: "Tabulation and visual display of the results should always be presented alongside any synthesis". Six columns do the job for conflicting findings: study and year, participants and setting, outcome and the instrument used to measure it, the direction of the result, the design and your risk of bias judgement, and the page or passage the result came from. That last column is the one people skip and then regret, because it is what lets you check a claim months later without rereading the whole paper. A free blank template, and a comparison built from up to 3 of your own PDFs with each filled cell quoting its passage, are in the Literature Review Matrix tool, and the longer extraction method is in our guide on how to extract and chart data from studies . Source: Cochrane Handbook, chapter 12 , key points, read October 2026. ## What if my studies are qualitative and the findings do not line up? Qualitative findings that do not line up are assessed, not averaged. GRADE-CERQual, the approach for judging confidence in findings from qualitative evidence synthesis, uses four components: "(1) methodological limitations, (2) coherence, (3) adequacy of data, and (4) relevance" (Implementation Science, 2018, DOI 10.1186/s13012-017-0688-3). Coherence is the component that matters when accounts diverge, because it asks how clear and cogent the fit is between the data from the primary studies and the finding built from them, and the series’ paper on coherence names contradictory data as one of the things that weakens that fit. For a qualitative chapter, then, report the variation as a finding about conditions: this pattern appeared in these settings and with these participants, and did not appear in those. That is also how a divergent study becomes part of a theme rather than an awkward outlier, using the method in our guide on how to structure a literature review by theme . Sources: Lewin and colleagues, Applying GRADE-CERQual to qualitative evidence synthesis findings: introduction to the series , Implementation Science 2018;13(Suppl 1):2; Colvin and colleagues, the series’ paper on coherence , Implementation Science 2018, read October 2026. ## Which tools help me see whether papers agree or disagree? Four tools and Litrevu cover different parts of this job, and as of October 2026 none of them does all of it. If what you need is papers you do not have yet, Elicit and Research Rabbit beat Litrevu outright, because Litrevu's only discovery is a basic open-access search and it works on the library you build. Comparison of Litrevu, Elicit, Consensus, Scite and Research Rabbit by what each is best for, what it works from, what it outputs, and where each beats Litrevu. Tool Best for Works from What you get Where it beats Litrevu Litrevu Understanding, comparing and checking the papers you have already chosen PDFs you add, plus open-access papers you pick from an OpenAlex search Answers that cite the passage they came from, side-by-side comparison tables, and a check of your own writing against your papers Only a basic open-access search, no screening at scale, no view on whether a source is contested Elicit Finding papers and extracting structured data from them 138M paper corpus, and PDFs you upload Reports, tables, summaries and structured comparisons Far larger discovery corpus, systematic review screening into the thousands, purpose-built data extraction tables Consensus Answering an empirical yes or no question across the literature 200M+ peer-reviewed papers Synthesised answer with a meter showing how much of the literature agrees Answers questions across all published work in seconds; nothing in Litrevu does this Scite Checking whether a paper has been supported or contradicted since 1.6B+ classified citation statements Citation contexts labelled supporting, contrasting or mentioning Tells you if a source is contested. Litrevu has no view on this at all Research Rabbit Exploring outward from one paper to find related work Citation graph Visual networks of related papers, authors and topics Visual citation-graph discovery; Litrevu offers nothing comparable The honest split: if you do not yet have your papers, Elicit, Consensus and Research Rabbit will get you there faster than Litrevu can. Litrevu's only discovery is an open-access search (OpenAlex) when you add sources, where you pick which papers to add; it cites only the papers in your library and does not search the web for citations. If you want to know whether a study you already cite has since been contradicted, Scite answers that and Litrevu does not. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Elicit also works from uploaded PDFs, so the real difference there is the shape of the work: Elicit produces reports, tables and structured comparisons, with a purpose-built extraction workflow, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Its comparison tables are built in chat for a handful of papers and are not an extraction workflow. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Comparison verified as of August 2026 against each vendor's own documentation. These products change quickly, so check the current feature list before deciding. Litrevu is free to start with 25 messages and 2 drafted sections every 30 days , no card needed, and paid access is sold as time-limited passes rather than a monthly subscription, as of October 2026. Free tiers and prices for all five tools, read off each vendor’s own page, are compared in our guide to the cheapest literature review software for postgraduate students . ## How do I report the disagreement so an examiner can check it? Write down what you did, in the methods section, in two or three sentences. The SWiM reporting guideline, published in the BMJ on 16 January 2020 (BMJ 2020;368:l6890), sets out nine items for reviews that synthesise without meta-analysis, and three of them are exactly this task: item 1 covers "grouping studies for synthesis", item 3 asks authors to "describe the synthesis methods", and item 5 covers "investigation of heterogeneity in reported effects". For a Masters or PhD literature review that is not a formal systematic review, those three items still translate cleanly: say how you grouped studies, say how you compared them, and say how you handled the cases where they disagreed. An examiner who can see those three sentences has no reason to suspect you ignored the awkward paper. The broader method for getting from a pile of papers to connected prose is in our guide on how to synthesize sources in a literature review . Source: Campbell and colleagues, BMJ 2020;368:l6890 , read October 2026. ## Frequently asked questions ## Should I leave out a study that contradicts everything else I found? No. Leaving out a study because its result is inconvenient is selective reporting, and an examiner who knows the field will notice the gap. Include it, report what it found, and explain what differs about its participants, measures or design. A disagreement you have explained is stronger evidence of critical reading than a chapter where every paper agrees. ## Does one contradicting study mean my research gap has gone? Not usually. A single study pointing the other way often narrows a gap rather than closing it, especially if it used a different population or instrument from the rest of the literature. The GRADE Handbook's inconsistency criteria in section 5.2.2 are judgements about a body of evidence, which is why one paper rarely settles a question. State what the study found, then state which part of your gap it affects. ## How many studies do I need before a disagreement is worth writing about? Two. The GRADE Handbook's inconsistency criteria apply as soon as results come from more than one study, so a conflict between two papers is already reportable. What changes with more studies is the language you can justify: with three or four papers you can describe a pattern, and with a published meta-analysis you can quote its I² and heterogeneity test instead of characterising the spread yourself. ## What do I write if I cannot work out why two studies disagree? Say so, in those words. Report both results, list the study characteristics you compared, and state that the difference is not explained by the available information. That is defensible, and far better than implying a reason you cannot support. An unexplained disagreement is also a legitimate thing for a new study to address, so the sentence does double duty in your justification. ## Can I use I² if I am not running a meta-analysis? You can quote it, not calculate it. I² comes out of a meta-analysis, so in a narrative literature review you report the value a published review gives and interpret it with the Cochrane Handbook's bands from section 10.10.2. Those bands are published for meta-analyses of randomised trials, and the handbook warns the thresholds can be misleading, so quote the number with its source and avoid turning it into a verdict of your own. ## Compare Your Own Papers Side by Side Conflicting findings are slow work, because they need two papers held side by side at the level of the specific passage in each one. Litrevu reads the papers you add, answers questions about them with a citation that opens to the exact passage behind each claim, and maps where your papers agree and disagree, so the comparison table and the paragraph start from something traceable. Litrevu can also draft cited text, and many universities do not allow AI-written text in submitted work even after editing, so check your institution’s policy, write your own text, and declare how you used any tool. You read every line and you check every citation. If you want to try it on your own papers, it is free to start with 25 messages and 2 drafted sections every 30 days , no card needed. Try Litrevu free ## Related Guides - How to Synthesize Sources in a Literature Review - How to Critically Appraise a Research Paper (CASP Checklist, With Examples) - How to Extract and Chart Data from Studies for a Literature Review - Scoping vs Systematic vs Narrative Review: Which Do You Need? --- # Which AI Tool Tells You If Your Research Question Has Already Been Answered? (2026) URL: https://litrevu.com/blog/has-my-research-question-already-been-answered Category: AI & Research Writing Published: 2026-10-12 Summary: No single tool answers it. How PROSPERO, the Cochrane Library, Elicit, Consensus, Scite and Research Rabbit each help, and what none of them can tell you. AI & Research Writing ## Which AI Tool Tells You If Your Research Question Has Already Been Answered? (2026) By Samuel de Bruyn · 12 October 2026 · 11 min read No single AI tool tells you whether your research question has already been answered. The check that actually works is two separate searches in two separate kinds of database: a review register such as PROSPERO, which holds reviews other people have declared they are working on, and a published-review database such as the Cochrane Library, which holds the ones already finished. AI tools like Elicit, Consensus, Scite and Research Rabbit help you read what comes back faster, and none of them holds the register, so none of them can answer the novelty question on its own. That split matters because the two failure modes are different. A question nobody has published on may still have four teams racing you, and only the register shows that. A question with no register entry may have been settled years ago in a published review your search terms never surfaced. ## What does "already answered" mean for a literature review? A research question counts as already answered when a published review or primary study has synthesised the evidence on a comparable population, exposure and outcome closely enough that repeating the work would add nothing new. PROSPERO, the international register of systematic review protocols produced by the Centre for Reviews and Dissemination at the University of York and funded by the National Institute for Health and Care Research (NIHR), applies that test at registration: before you can register, it shows you the registered reviews most similar to yours and asks you to check them. That is the practical standard. Not "has anyone touched this topic", but "is mine different enough from what is already registered". Most postgraduate questions pass. A question narrowed to one country, one age band, one time window or one measurement instrument is usually different enough from the broad review that exists, and saying exactly how it differs is the work. If you are still shaping the question itself, how to write a research question covers the narrowing step before this check becomes useful. ## How do I check whether someone has already registered a review on my question? Search PROSPERO at crd.york.ac.uk/prospero before you start extracting data from papers. PROSPERO aims to "help prevent unintended duplication and research waste", registering a review is free, and before you can register it asks you to check the registered reviews it identifies as similar to your own. It also sets a hard timing rule: "Reviews must be registered before data extraction has started, or before individual participant data (IPD) have been received." So a register hit tells you not only that someone else is on your question, but that they committed to it before their data extraction began. PROSPERO’s scope is narrower than most students expect, and that catches people out. PROSPERO "only accepts registrations of systematic reviews examining outcomes that are of direct relevance to human health and wellbeing", and it does not register "Literature reviews that use only a systematic search and no other systematic review methods" or "Scoping reviews (these may be incorporated in future)". So if you are writing a narrative literature review in education, management or the humanities, PROSPERO holds nothing on your question, and an empty result there is not evidence of novelty. Source: PROSPERO , Centre for Reviews and Dissemination, University of York, read October 2026. ## How do I check whether my question has already been answered in a published review? Search the Cochrane Library at cochranelibrary.com. The Cochrane Library is owned by Cochrane and published by Wiley, and it is a set of separate databases: the Cochrane Database of Systematic Reviews holds Cochrane Reviews and protocols, with new and updated ones published continuously as they are ready, while the Cochrane Central Register of Controlled Trials holds trial reports and is published monthly. For a novelty check, the review database is the one that matters. A protocol there tells you a Cochrane team is already working on your question, and a finished review tells you it has been answered. The Cochrane Library holds Cochrane’s own reviews, not every review publisher’s. A clean result there is one answer from one place, so search the main databases in your field for published systematic reviews as well before you call the question open. Source: About the Cochrane Library , Cochrane. ## Can Elicit or Consensus tell me whether my research question is new? Neither Elicit nor Consensus answers the novelty question, because neither one searches review registers. What they do is shorten the reading. Elicit is strongest at finding and screening papers across a large corpus, and its free Basic tier covers search across its paper index plus limited usage of its Research Agent and Research Reports, with paid tiers listed on its own pricing page. Consensus is strongest at surfacing a fast evidence summary for a single question, which is useful when your question is already phrased as a yes or no claim. Consensus publishes its current free-plan caps on its own pricing page, and those caps are worth reading there rather than from a figure quoted in a blog post, including this one. Where they beat Litrevu, plainly: if you have not yet gathered your papers, Elicit will build and filter that set far better than Litrevu will, because Litrevu starts from papers you have already chosen. Use Elicit or Consensus first, then come back. How to find a research gap walks through what to do with the papers once they are in front of you. Sources: Elicit pricing , Consensus pricing , read October 2026. ## Does Scite tell me whether the literature agrees on my question? Scite answers a different and often more useful question: not whether your question has been asked, but whether the papers citing a given study support it or contrast with it. That citation context is the fastest way to find out that an apparently settled finding has been contested since publication, which is frequently where a still-open question hides. Scite is a paid product. As of October 2026 its pricing page lists no free plan and offers a 7-day free trial for new users, with its paid plans listed on that page. For a one-off novelty check, the trial is enough. For a two-year thesis, a reference manager plus the free register searches will cover most of what you need, and Scite becomes worth paying for when your field has an active disagreement you need to map. Source: Scite pricing , read October 2026. ## Can Research Rabbit show me what has already been done? Research Rabbit shows you the citation neighbourhood around papers you already have, which is how you find the adjacent work your keyword search missed. Its own site says it "analyzes papers you love and finds the research you’ve been missing", and it turns a seed paper into a visual map of related work. Sign-up is free, and the site says so directly: "Sign up - it’s free." What Research Rabbit cannot do is tell you that a review is in progress, because an unpublished registered protocol has no citation network yet. Research Rabbit is a discovery tool, not a register. Pair it with the snowballing technique in citation chaining and it will surface the older review that answers your question in slightly different words. Source: Research Rabbit . ## Which tool should I use for which step? Use a register for novelty, a review database for prior answers, a discovery tool for adjacent work, and a reading assistant only after the question survives all three. Free access below was read off each product’s own page in October 2026. Tool What it tells you about "has this been answered" What it cannot tell you Free access PROSPERO Whether a systematic review on your question is already registered, and that it was registered before data extraction began Anything outside human health and wellbeing, and nothing on scoping reviews or narrative literature reviews, which it does not register Free to search and free to register Cochrane Library Whether a Cochrane review or protocol already covers your question Reviews from other publishers, reviews registered only with PROSPERO, and anything outside health care Searchable without an account; some full texts need a subscription, institutional licence or national provision Elicit What the existing papers on your question report, at screening scale across its index Whether a review is registered, because Elicit does not search registers Free Basic tier, limited Research Agent and Research Reports usage; paid tiers at elicit.com/pricing Consensus A fast evidence summary for a single question phrased as a claim Whether a review is registered, and whether your framing is novel Free plan with monthly caps; current caps and paid tiers at consensus.app/pricing Scite Whether papers citing a study support or contrast with it, so you can see live disagreement Whether anyone has registered or published a review of your exact question No free plan listed; 7-day free trial, then paid plans at scite.ai/pricing Research Rabbit Which adjacent published work your keyword search missed, mapped as a citation network Anything about registered or in-progress reviews Free to sign up Litrevu Nothing about novelty. Litrevu is the step after the check, not the check Whether your question is new, because Litrevu answers only from the papers in your library 25 messages and 2 drafted sections every 30 days , no credit card; one-off passes from $8.49 for 7 days , $29 for 3 months , $69 for 12 months ## What does Litrevu do once the question is still open? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Litrevu does not run a novelty check, does not search PROSPERO, and has no view on whether your question is new, because Litrevu answers only from the papers in your library. The point in the process where it helps is after the register search comes back clear and you have thirty or forty papers on your desk to read and compare. Here is the shape of a cited answer to a question such as "How do these studies measure the outcome?", as a format illustration and not a real result. The tokens stand in for your own papers: Three of the studies measure the outcome with different instruments (Author, Year; Author, Year), while a fourth reports a composite score (Author, Year). The papers do not use a common measure, so their effect sizes are not directly comparable. Sources: [PDF 4, p. 7] [PDF 9, p. 2] [PDF 11, p. 14] Every claim carries the page in the PDF it came from, and that page reference is the part you verify: open the passage and check the claim against it. The sentences in your review should be ones you wrote yourself. For a mechanical check on the reference list you end up with, the Litrevu reference checker tests up to 30 references per check against Crossref and OpenAlex with no account, and flags retractions Crossref carries from Retraction Watch. ## How do I write up the fact that the question is still open? Report the registration status explicitly and say what makes your question different, in the methods or in a short paragraph at the end of your review. PRISMA 2020, the reporting guideline published as Page and colleagues, BMJ 2021;372:n71 (DOI 10.1136/bmj.n71), runs to 27 items across seven sections, and it keeps a protocol and registration item, which the 2020 update moved into a new Other information section and expanded with a sub-item asking authors to describe amendments to what they registered. In practice that means a reviewer expects one of two sentences from you: the registration name and number, or a statement that the review was not registered. For a Masters or doctoral review that does not qualify for PROSPERO, write the equivalent anyway: the registers and databases you searched, the date you searched them, and what you found. A supervisor reading the standard section order looks for that in the methodology, and a documented search date is what defends the review if a competing paper appears while you are writing. ## Frequently asked questions ## Is it a problem if someone has already answered my research question? Usually not, because a near match is a reason to narrow rather than to abandon. PROSPERO asks anyone registering to check the registered reviews similar to their own before they can proceed, and a different population, country, time window or measurement instrument commonly makes a review different enough to stand. The risk is finishing the review without having checked, then discovering the overlap at examination. ## Can ChatGPT or Claude tell me whether my research question is original? No, and relying on one here is costly. A general assistant has no live connection to PROSPERO or to the Cochrane Library, so it answers from pattern rather than from the register, and it can produce confident citations to papers that do not exist. Use an assistant to help phrase the question, then run the search yourself in the register. ## Do I need to register my literature review on PROSPERO? Only if it fits PROSPERO's scope, which is narrower than most students assume. PROSPERO only accepts systematic reviews examining outcomes of direct relevance to human health and wellbeing, and it does not register scoping reviews or literature reviews that use only a systematic search and no other systematic review methods. A narrative review in education or management belongs nowhere in PROSPERO, so document your search instead. ## What is the free way to check whether my question has been answered? Searching PROSPERO and the Cochrane Library costs nothing, and Research Rabbit's sign-up is free. That combination covers registered reviews, published reviews and the citation neighbourhood, which is most of the check. The paid AI tools speed up reading the results; they do not add a database the free route lacks. ## How long does this check take? Budget an afternoon for the first pass, and keep the search strings, because you will repeat the check before you submit. Record the register and database names and the date you searched, since PRISMA-style reporting expects search dates. ## My field has no review register. What then? Search the published-review databases, then search by method rather than by topic, because the overlap you care about may be published under a different framing. Document the absence of a register in your methods with the date you checked, and reviewers accept that as the honest answer for fields where no register exists. ## Ask Your Own Papers Once the register search comes back clear and the question survives, the bottleneck moves from finding papers to understanding them. Ask Litrevu what your papers say, compare their methods side by side, and open each citation to read the passage behind it. The free tier covers 25 messages and 2 drafted sections every 30 days with no credit card required, so you can try it on your own reading list. Start with your own papers ## Related Guides - Scoping vs Systematic vs Narrative Review: Which Do You Need? - Literature Review vs Systematic Review: What’s the Difference? - Best AI Tool for a Systematic Review in 2026 - PRISMA Flow Diagram: How to Report Your Search --- # The Ethics of AI in Research Writing: What Universities Should Expect From an AI Research Assistant (2026) URL: https://litrevu.com/blog/ethics-of-ai-in-research-writing Category: AI & Research Writing Published: 2026-10-12 Summary: AI use in research writing is ethical when the student stays the author. What COPE, ICMJE, Birmingham and UCT require, and what to ask of an AI assistant. AI & Research Writing ## The Ethics of AI in Research Writing: What Universities Should Expect From an AI Research Assistant (2026) By Jessica McLaren · 12 October 2026 · 11 min read Using AI in research writing is ethical when the student stays the author: they choose the sources, do the reasoning, write the words they submit, check every citation and declare how the tool was used. That is the line publishers and universities have drawn since 2023, from COPE’s position that "Authors are fully responsible for the content of their manuscript, even those parts produced by an AI tool" to the University of Birmingham’s rule that AI-generated content submitted as your own is plagiarism. An AI research assistant deserves a place in a university only if it is built to keep students on the right side of that line, and to make the reading and checking easier rather than the thinking unnecessary. We build Litrevu, so we have a stake in this question, which is a reason to be precise about where the line sits. ## What does ethical AI use mean in research writing? Ethical AI use in research writing means a human author keeps full responsibility for every claim, citation and sentence in the work, uses AI only in ways the institution permits, and discloses that use openly. The Committee on Publication Ethics (COPE) states the core of it plainly: "AI tools cannot be listed as an author of a paper", because they "cannot take responsibility for the submitted work". Responsibility is the test, not the tool. That test rules out more than ghost-writing. An invented citation, a summary that misreads a paper, or an argument the student could not defend in a viva all fail it, because nobody responsible checked them. Searching, reading, comparing and checking sources all pass it, because the author stays responsible for the result. Source: COPE position statement on authorship and AI tools . ## What do journals and publishing bodies require when researchers use AI? Publishing bodies require three things: AI cannot be an author, authors must disclose AI use, and humans remain responsible for accuracy and attribution. COPE asks authors to disclose "in the Materials and Methods (or similar section) of the paper" how and which tool they used. The International Committee of Medical Journal Editors (ICMJE) goes further on where disclosure belongs, asking authors to describe AI use "in both the cover letter and the submitted work", and warns that failing to disclose "may be construed as misconduct in some circumstances". ICMJE also names the risk that matters most for literature reviews: "Humans must ensure there is appropriate attribution of all quoted material, including full citations", and AI output should be reviewed because it can be incorrect, incomplete or biased. Examiners hold a thesis chapter to the same standard in spirit, and treat a fabricated citation as an integrity problem rather than a typo. Sources: COPE , ICMJE recommendations on AI use by authors . ## What do universities allow students to do with AI? Universities differ, and the honest summary is that the module or assessment brief decides. Some institutions start from permission with conditions, and others start from prohibition with exceptions. Here is how four published positions compare, as of October 2026. Institution or body Default position What it asks of students and staff Date Russell Group (24 UK universities) Ethical use, taught and supported Five principles, starting with "Universities will support students and staff to become AI-literate" and including "Universities will ensure academic rigour and integrity is upheld" July 2023 University of Birmingham (UK) "students should assume that the use of generative AI within an assessment or assignment is not permitted" unless the brief says otherwise Where permitted, confirm how AI was used, for example with a statement or by sharing prompts and outputs Current guidance University of Cape Town (South Africa) AI in Education Framework with three pillars: AI literacies, assessment integrity and innovation Treats detection as unreliable: "AI detection tools are widely considered to be unreliable, and can produce both false positives and false negatives". Turnitin’s AI score was withdrawn at UCT from 1 October 2025 Endorsed June 2025, announced 15 July 2025 UNESCO Guidance for generative AI in education and research Calls for "a human-agent and age-appropriate approach" to the ethical validation and pedagogical design of AI tools 7 September 2023 The pattern across all four is that AI literacy and transparency are expected, and that detection is not treated as the answer. That puts the weight on how a tool is designed and how a student uses it, which is where an assistant can help or harm. Sources: Russell Group principles , University of Birmingham generative AI guidance , UCT AI in Education Framework announcement , UNESCO guidance . ## How many students already use AI for assessed work? Nearly all of them, at least in the UK. The Higher Education Policy Institute’s Student Generative AI Survey 2026, published with Kortext on 12 March 2026 and based on 1,054 full-time undergraduates, found that "95% of students now use AI in some form" and "94% use generative AI to support assessed work". The same release reports that "fewer than half feel supported by their teaching staff". Those are UK undergraduates, not South African postgraduates, and we would not stretch the figures further. But when use is close to universal, a ban mostly decides whether AI use is visible, not whether it happens. The useful questions become which tools students use, what those tools encourage, and whether students know how to declare what they did. Source: HEPI Student Generative AI Survey 2026 . ## Where is the line between an AI research assistant and AI writing the paper? The line is whether the AI helps the student understand and check sources, or produces the substance the student submits as their own. The University of Birmingham’s Code of Practice on Academic Integrity draws it in unusually concrete terms, and it is a useful model even for students elsewhere. Submitting "work and Assessments created by someone or something else, as if it was your own, is plagiarism", and the code says that includes "Artificial Intelligence (AI)-generated content". Birmingham’s editing rules, in clause A.1.6 of the same code, show how fine the line is: generative AI "may be permitted only where it is limited to technical or presentational support", and a student "must not use generative AI or other editorial assistance to" change the substance. Activity Under the University of Birmingham’s code Correcting spelling and punctuation, and improving grammar without changing meaning Permitted as technical or presentational support Shortening sentences or paragraphs without changing the overall content Permitted Developing, altering or extending ideas, arguments or explanations Not permitted Correcting or improving the accuracy of substantive information Not permitted Reducing length to meet a word limit, where that means substantive rewriting Not permitted Submitting AI-generated content as your own Plagiarism and academic misconduct Other universities set the line elsewhere, so a student should read their own module brief. Litrevu’s own site says the same thing in its FAQ: "Many allow AI as a study aid for reading, searching and summarising your sources, which is what Litrevu is for", while "Many do not allow AI-written text in work you submit, even after you edit it." Sources: University of Birmingham generative AI guidance and its Code of Practice on Academic Integrity (2026-27), clauses 1.5 and A.1.6; Litrevu FAQ . ## How does Litrevu try to keep the student as the author? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The design choices that matter for integrity sit underneath that sentence. Litrevu works only from the student’s own library, and its site states that "Litrevu cites only papers in your library, and checks each citation against a passage it read before you see it." Anything Litrevu adds from general knowledge "carries no citation", so an untraceable claim looks untraceable rather than borrowing authority it has not earned. Litrevu can draft cited text, and we will not pretend otherwise in a post about honesty. Under a code like Birmingham’s, a drafted section is AI-generated content however much it is edited, and using AI to develop an argument is ruled out, so a draft is no shortcut there. What we tell students is in our FAQ: "Litrevu can draft text, so if your policy rules that out, use it to read, compare and check, write your own text, and declare how you used it." We also ask them to treat every answer "as a lead to check rather than a fact". Litrevu also checks a student’s own paragraphs against their sources, which is the use we would point a supervisor to first, because it keeps the student writing and gives them a way to test what they wrote. Here is the shape of that check, as a format illustration and not a real result. The tokens stand in for the student’s own paragraph and uploaded papers: Your sentence 2: cites (Author, Year) Passage found: uploaded PDF 3, page n Read the passage. Does it support your sentence as written? Your sentence 3: no citation Not traced to any paper in your library. Add a source you have read, or mark it as your own argument. The limit is stated plainly on the site too: Litrevu checks that a citation points to a passage, and it cannot confirm that the passage fully supports the sentence. The student reads the passage. That step is the learning, and no tool should remove it. ## How does an AI research assistant help students learn instead of outsource? An AI research assistant helps students learn when it shortens the mechanical work around reading, finding, comparing and checking, and leaves the judgement and the writing with the student. The Russell Group’s first principle is that universities "will support students and staff to become AI-literate", and UNESCO’s 2023 guidance asks for "a human-agent" approach. Both describe a student who uses tools knowingly, not one who is kept away from them. In practice that means asking questions across a stack of papers and getting answers that point to a passage, then reading the passage. It means a side-by-side comparison of methods across studies, the raw material for synthesis, with the synthesis still written by the student. And it means finding out before submission that a sentence has no source behind it. Voice is where the difference shows. A student who has read the papers, compared them and tested each claim against a source has something to say, and the prose that comes out of that is theirs. A student who pastes in a generated paragraph has nothing to defend in a viva. If you are teaching students to put sources into their own words, how to paraphrase in academic writing covers the skill no tool replaces. Sources: Russell Group principles , UNESCO guidance . ## How should students declare AI use in a thesis or assignment? Students should declare which tool they used, its version where known, what they used it for, and whether any AI-produced text, images, code or tables appear in the submitted work, in the format their university asks for. ICMJE’s expectation that disclosure sits "in the submitted work" and COPE’s preference for the methods section both point to a declaration that a reader can find, not a line buried in an acknowledgement. Litrevu’s free AI disclosure statement generator produces a declaration in a chosen university’s format (South African, UK, Australian and Norwegian universities), an AI reference in APA, Harvard or MLA, and a list of records to keep. It needs no account, "uses templates, not an AI model", and says "Nothing you type leaves your browser, and nothing is saved." It also says it "cannot tell you whether a use was allowed", which is right: the brief decides that. For the wording itself, how to write an AI-use disclosure statement walks through examples. ## What should a university ask before approving an AI research assistant? A university should ask where student data goes, whether every citation can be traced to a real source, what the tool will not do, and how it supports disclosure. Those four questions separate a research assistant from a text generator faster than a feature list does. Here are the answers Litrevu publishes on its own site, as of October 2026. Question to ask Why it matters Litrevu’s published answer Where do students’ papers go? Unpublished work and licensed PDFs Papers go into a private library nobody else can see. Their text is processed by Litrevu’s AI providers, currently OpenAI and Google, under API terms that prohibit using it to train their models. The PDF files stay on Litrevu’s own infrastructure Can every citation be traced? ICMJE requires full attribution Cites only papers in the student’s library and checks each citation against a passage before the student sees it What will the tool not do? Scope creep into prohibited uses Does not search the web for citations or pull in papers the student did not choose, and has no screening or PRISMA flow for systematic reviews Does it support disclosure? COPE and ICMJE both require it Free AI disclosure statement generator with university formats, no account Other tools answer different questions well, and we would rather a university chose the right one. Elicit is stronger at finding and screening papers across a large corpus, and Scite at showing whether citing papers support or contrast a claim. Litrevu is strongest once a student has chosen their papers and needs to read, compare and check against them. Whichever tool it is, one that cannot say where data goes, how citations are traced, what it will not do and how it supports disclosure is not ready for a postgraduate cohort. Why detection is giving way to process-based evaluation covers the assessment side of the same decision. ## Frequently asked questions ## Is it ethical for students to use AI for a literature review? It can be, when the student chooses the sources, reads them, writes the text they submit and declares the AI use, and when their institution permits that use. COPE's standard is that the author stays fully responsible for everything in the work, including anything an AI tool produced. The ethical failure is not using AI, it is handing over responsibility. ## Can an AI tool be listed as a co-author on a thesis or paper? No. COPE states that "AI tools cannot be listed as an author of a paper" because they cannot take responsibility for the work, and ICMJE says chatbots "should not be listed as authors". AI use is disclosed in the methods or a declaration instead. ## Do AI detectors prove a student used AI? No, and some universities have stopped relying on them. The University of Cape Town's AI in Education Framework describes detection tools as "widely considered to be unreliable", and UCT withdrew Turnitin's AI score from 1 October 2025. Transparent disclosure and process evidence are more reliable than a detection score. ## Does Litrevu write students' assignments? No. Litrevu is an AI assistant for writing backed by sources: it works only from papers the student uploads, answers questions with citations to specific passages, compares studies and checks a student's own paragraphs against their sources. It can also draft cited text, which many universities treat as AI-written even after it is edited, so its own guidance is: if your policy rules that out, use it to read, compare and check, write your own text, and declare how you used it. ## What should a student keep as evidence of how they used AI? Keep the prompts, the outputs, any share links and dated drafts of your own writing. Those records support a declaration if a supervisor or examiner asks how the work was produced, and they are the records Litrevu's free disclosure generator lists for students to keep. ## See What Litrevu Does With Your Own Papers The ethical test for any research assistant is whether the student can still answer for every sentence. Litrevu works from the papers a student has already gathered, points every citation at the passage it came from, and leaves the reading, judgement and final words with the student. The free tier covers 25 messages and 2 drafted sections every 30 days with no credit card required, so a supervisor, librarian or student can test it against their own reading list. Try Litrevu with your own papers ## Related Guides - Can AI Write a Literature Review? What You Need to Know (2026) - How to Prove You Wrote Your Own Work: Building a Paper Trail for 2026 - How to Spot Fake AI Citations Before You Submit (2026 Guide) - How to Cite ChatGPT and AI Sources (APA, MLA, and Harvard) --- # Can You Reuse Your Literature Review From Your Research Proposal in Your Thesis? (2026) URL: https://litrevu.com/blog/reuse-literature-review-from-proposal-in-thesis Category: Literature Review Published: 2026-10-08 Summary: Reusing a proposal literature review in your thesis is allowed if you declare it. What UCL, Manchester, Stellenbosch, Cambridge and UNISA actually require. Literature Review ## Can You Reuse Your Literature Review From Your Research Proposal in Your Thesis? (2026) By Jessica McLaren · 8 October 2026 · 10 min read Yes in most cases, and the condition is almost always the same: the reuse has to be visible. The rule that governs it turns on one thing, which is whether the proposal was assessed. UCL defines self-plagiarism as "the reproduction or resubmission of a student’s own work which has been submitted for assessment", and Stellenbosch University’s plagiarism policy defines it at section 3.6 as "the re-use of one’s own previously evaluated or published material without acknowledgement or indication thereof". A proposal that was graded sits inside both of those definitions, so reusing its literature review silently is self-plagiarism and reusing it with a declaration is not. A proposal that was a planning document your supervisor read and never marked sits outside both, and what you are left with is a writing problem rather than an integrity one. ## What counts as self-plagiarism when you reuse your own work? Self-plagiarism is reusing your own earlier work in something new without telling the reader. Stellenbosch University’s Policy on Plagiarism in Support of Academic Integrity defines it in section 3.6 as "the re-use of one’s own previously evaluated or published material without acknowledgement or indication thereof". That policy was approved on 28 November 2016. UCL’s definition, which its doctoral guidance takes from the UCL Academic Manual 2025-26, is narrower and names the trigger directly: "the reproduction or resubmission of a student’s own work which has been submitted for assessment". Two phrases carry the weight in both definitions. "Previously evaluated" and "submitted for assessment" set the scope, which is material that was marked, graded or used towards a qualification. "Without acknowledgement" sets the remedy, which is that saying what you reused removes the charge. The United States Office of Research Integrity definition quoted in the Naval Postgraduate School’s thesis guidance , last modified on 16 November 2022, lands in the same place: reuse of your own written work or data "without letting the reader know that this material has appeared elsewhere". So self-plagiarism is not a rule against reusing your own sentences. It is a rule against reusing them silently. ## Does my university let me reuse text from my own research proposal? Most universities do allow it, and very few say so in those words, because plagiarism policies are written about work submitted for a degree or graded for a module rather than about proposals. Whether your proposal falls inside the policy depends on what the proposal was: an assessed submission, or a planning document. Here is what five institutions actually require, as of October 2026. Institution What its rule covers What it asks of you UCL (Academic Manual 2025-26) Resubmission of work "submitted for assessment". The PhD upgrade report is left out of the earlier material a thesis must declare, because it "is not published nor is it used to confer a degree" Reference the earlier source "even if you own the copyright", and embed the declaration form after the title page University of Manchester (Presentation of Theses Policy, Version 12, March 2026) A compulsory declaration page at section 8.1(f) Declare either that no portion of the thesis was submitted for another degree, or state exactly what portion was Stellenbosch University (Policy on Plagiarism, sections 3.6 and 11) Re-use of previously evaluated material, with the declaration set at module and assignment level Declare that you have not previously submitted the work "(in its entirety or in part) ... for grading in this module/assignment or another module/assignment" University of Cambridge, Department of History and Philosophy of Science Essays and dissertations that build on your own previous work Identify the earlier work in the text and reference it "as if it were written by a different person" UNISA (master’s and doctoral plagiarism page) States that your work, "including your research outline, must be the result of your own skill and labour". Does not define self-plagiarism or address reuse of your own work at all Declare that all sources used, "including AI tools, have been acknowledged and declared" The pattern across those five is that the declaration is the mechanism, not the prohibition. Manchester never asks whether you reused your proposal. Manchester asks you to state what portion of the thesis was submitted in support of an application for another degree, and a proposal written for the degree you are currently registered for is not another degree. Where a policy is silent, as the UNISA master’s and doctoral page is, silence is not permission: ask your supervisor in writing and keep the reply. ## Will Turnitin flag my thesis against my own research proposal? Only if that proposal was submitted through Turnitin and saved to a repository. Turnitin’s own documentation says the automatic exclusion applies within a single class: "Turnitin automatically prevents these papers from matching against each other", a default self-match exclusion that is "designed to allow students to submit early drafts of their work". Across different classes it is not automatic. Self-matching persists where "at least one of those assignments was configured to save papers to the standard Turnitin repository", and in that case "instructors can manually override self-matches by excluding the match". In practice this splits into two cases. A proposal your supervisor read as an email attachment was never indexed by anything, so it cannot produce a match. A proposal you submitted through a Turnitin assignment in a research methods module is in the standard repository, and your thesis will match against it a year later because the thesis is a different class. That match is a similarity score and not a finding of misconduct, which is a distinction worth understanding before you panic about a number: see what your Turnitin similarity score actually means . ## Do I have to cite my own research proposal in my thesis? If the proposal was assessed, yes, and it is an ordinary citation with you as the author. Cambridge’s guidance gives the clearest instruction anywhere in this space: identify the earlier work and reference it "as if it were written by a different person". UCL says the same thing from the copyright side, that you "must clearly reference the source, even if you own the copyright", and that the citation belongs in the relevant chapter as well as in the declaration. Mechanically that is an unpublished-work citation. Both the Harvard referencing and APA patterns for one want your surname, the year, the title of the document, a description of what it is and the institution it was submitted to. Where the reuse runs to more than a sentence or two, most departments want it on the declaration page as well, and at Manchester that page is compulsory under section 8.1(f). ## How do I expand a proposal literature review into a thesis chapter? Change its job rather than its length. A proposal literature review argues that a gap exists and that your study is worth approving, so it is selective on purpose. A thesis literature review has to survey the field well enough that your methodology chapter follows from it, which means more sources, more themes, and a synthesis organised by argument instead of by study. The scale of the rebuild is usually the surprise. Litrevu’s free dissertation word count calculator plans a 10,000 word undergraduate dissertation with the literature review at 20 percent of the total, about 2,000 words, built from 13 to 20 sources across 2 to 3 themes of roughly 570 to 850 words each. Masters and doctoral reviews scale up from there. A 1,500 word proposal review therefore rarely survives into a thesis as more than a skeleton, and treating it as a theme map you rebuild around is more realistic than treating it as a draft you extend. The mechanics of that rebuild are the same ones in how to update an existing literature review . ## Do I need to re-check the references from my proposal before they go in my thesis? Yes, and retractions are the reason. A proposal written a year or two before you submit carries references that may have been retracted, corrected or flagged in the time since you wrote it, and nothing in your document updates itself when that happens. Litrevu’s free reference checker takes a pasted reference list of up to 30 references per check with no account, looks each one up in Crossref and OpenAlex and at doi.org, and shows retractions and expressions of concern next to the reference, because Crossref carries the Retraction Watch database. As of October 2026 its stated limit is coverage rather than accuracy: it cannot find records that Crossref and OpenAlex do not hold, which includes many books, theses, reports and some regional journals, and where it cannot find a reference it says so rather than calling the reference fake. For the retraction side of the job on its own, how to check whether a paper you cited has been retracted walks through the databases by hand. ## Which tools help rebuild a literature review when you already have the papers? Litrevu, Elicit, Consensus, Scite and Research Rabbit all do part of this job, and they divide along one line: whether you still need to find papers or already have them. Elicit and Research Rabbit are the ones that find and widen, Scite and Consensus are the ones that test claims you already made, and Litrevu works inside a paper set you have already chosen. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Tool Strongest at Where it fits when you are rebuilding a proposal review Elicit Finding and screening papers across a large corpus Widening a thin proposal reference list before you rewrite anything Consensus Surfacing a fast evidence summary for a single question Checking whether a claim your proposal made still holds Scite Citation context, whether a paper supports or contrasts a claim Testing whether sources you cited a year ago are still read as supporting you Research Rabbit Mapping a citation network visually to discover adjacent work Finding the adjacent literature the proposal missed Litrevu Answering questions across a paper set the researcher already chose, with each answer citing the passage behind it, and checking the researcher’s own paragraphs against those papers Checking what each paper in a settled set actually says, and whether the paragraphs you carried over from the proposal still match it Where the competitors win, they win clearly. If your proposal review is thin because you had not read enough when you wrote it, Elicit and Research Rabbit are the better first stop, and Litrevu is not the place to start, because Litrevu works from a paper set you have already chosen. Free plans across all of these changed during 2026, so read each tool’s own pricing page rather than any comparison post, including this one. ## What does a rebuilt literature review section actually look like? A rebuilt literature review section has four parts: a theme heading, a synthesis sentence that cites several papers at once, a sentence that names where the papers disagree, and a source block tying each claim to a specific page of a specific PDF. The fourth part is the one a proposal review almost never has and a thesis chapter needs. The shape below is a format illustration of those four parts and not a real result: the author and year tokens are placeholders, and no finding, sample size, year or statistic has been filled in, because inventing one in a post about citation integrity would be exactly the kind of untraceable claim the source block exists to prevent. ### Theme 2: Barriers to adoption Several of the papers converge on cost as the primary barrier (Author, Year; Author, Year; Author, Year). (Author, Year) reports the opposite pattern in a rural sample and attributes the difference to infrastructure rather than to price. Sources for this paragraph: - (Author, Year), PDF, page n - (Author, Year), PDF, page n - (Author, Year), PDF, page n The part that matters in that shape is the last block. Every sentence points back to a specific PDF and a page inside it, so when a supervisor or examiner asks where a claim came from, you open the paper instead of searching for it. Paragraphs carried over from a proposal usually lack that block, which makes them the first thing to check: open each source again and confirm it still says what your old sentence claims. ## Frequently asked questions ## Is it plagiarism to copy my own literature review from my research proposal into my thesis? Not if you declare it, and usually not at all if the proposal was never assessed for a qualification. UCL defines self-plagiarism as "the reproduction or resubmission of a student's own work which has been submitted for assessment", so an unassessed planning document sits outside that definition. Where the proposal was graded, acknowledge the reuse in the text and on your declaration page and the issue closes. ## Will my university find out if I reuse text from my proposal? If the proposal was submitted through Turnitin and saved to the standard repository, your thesis will match against it, because Turnitin only excludes self-matches automatically within the same class. If your supervisor read the proposal by email, nothing indexed it and no match can appear. Either way a match is a similarity score rather than a misconduct finding. ## How much of my proposal literature review can I reuse? No university publishes a percentage, and anyone quoting you one is making it up. The practical limit is set by the job: a proposal review argues a gap exists, while a thesis review has to survey the field so your methodology follows from it, so most of a proposal review ends up rewritten rather than reused. ## Do I cite my own unpublished research proposal in the reference list? Yes, where you reused material from it and it was assessed. Both Harvard and APA handle it as an unpublished document, needing your surname, the year, the title, a description of the document type and the institution. Cambridge's guidance is the standard to aim for: reference your earlier work "as if it were written by a different person". ## Can I reuse a literature review from a different degree? This is the case where policies bite hardest. Manchester requires a compulsory declaration stating what portion of a thesis was submitted in support of another degree, and for journal format theses requires that the work be "substantially different from any work" previously submitted for any degree. Reuse across degrees needs explicit permission before you write, not a declaration afterwards. ## Ask Your Own Papers Rebuilding a proposal literature review into a thesis chapter starts with knowing exactly what each of your papers claims, and whether the paragraphs you wrote a year ago still match them. Ask Litrevu what your papers say about each theme, compare studies side by side, and check a reused paragraph against its sources, opening each citation to read the passage behind it. The free tier covers 25 messages and 2 drafted sections every 30 days with no credit card required. Litrevu can also draft cited text. Many universities do not allow AI-written text in submitted work, even after editing, so check your policy, write your own text and declare your use. If your proposal was assessed, declare that reuse too, because the declaration is what turns reuse into ordinary scholarship. Start with your own papers ## Related Guides - How to Write a Literature Review for a Research Proposal - How to Prove You Wrote Your Own Work: Building a Paper Trail for 2026 - How to Write an AI-Use Disclosure Statement for Your Assignment - How to Synthesize Sources in a Literature Review --- # Best Tools for Verifying Scholarly References (Free, 2026) URL: https://litrevu.com/blog/tools-to-check-if-your-references-are-real Category: AI & Research Writing Published: 2026-10-06 Summary: Four free tools verify a reference list: Crossref, OpenAlex, Zotero and Litrevu. See what each checks, what none catch, and how to find uncited entries. AI & Research Writing ## Best Tools for Verifying Scholarly References (Free, 2026) By Samuel de Bruyn · 6 October 2026 · 14 min read · Updated 12 November 2026 The best free tools for verifying scholarly references are Crossref’s Simple Text Query, OpenAlex, Zotero’s retraction flags and Litrevu’s reference checker. Crossref matches up to 1,000 pasted references to DOIs in one submission, OpenAlex confirms a single title or DOI against an open catalogue, Zotero flags retracted papers already in your library, and Litrevu’s reference checker tests up to 30 references at a time for existence, wrong details, a DOI that belongs to another paper, and retraction. None of those four tools will tell you whether a paper says what your sentence claims it says. That check is still manual, and the ICMJE Recommendations and university AI guidance put it on the author, not on the tool. What is reference checking? Reference checking means confirming two separate things about every entry in a bibliography: that the work exists as described, and that the details recorded for it are correct. A fabricated citation describes a paper that was never published; an erroneous citation points at a real paper but gets the author, year, journal, volume or page numbers wrong. One declaration before the list: I built Litrevu, one of the four tools, so weigh what I say about it accordingly. Every row below sticks to what each tool’s own pages state, including ours, as read in November 2026. ## What are the best tools for verifying scholarly references? Four free tools cover the reference checking job between them: Crossref, OpenAlex, Zotero and Litrevu’s reference checker. They overlap less than their descriptions suggest, because each one answers a different question about a reference, and the table shows which. Tool What you give it What it verifies What it will not catch Cost Crossref (Simple Text Query, plus the retraction filter in its REST API) Up to 1,000 references pasted as text, or a programmatic query Whether a DOI exists for the reference as written, and which DOI; through the API filter, every retraction notice Crossref holds from the Retraction Watch database References with no DOI, such as many books and theses, and whether the paper supports your sentence Free OpenAlex A title, DOI or author query, on the site or through the API Whether the work is in OpenAlex’s free and open catalogue of about half a billion scholarly works, with its metadata A whole pasted list in one pass, and whether the paper supports your sentence Free data under CC0; every account gets a free daily API budget Zotero retraction flags Your existing Zotero library Whether an item you have saved has been retracted, matched by DOI or PMID against Retraction Watch data Items with no DOI or PMID, and references that are not in Zotero Free Litrevu reference checker Up to 30 references pasted as text, in any style Existence; the year, first author, volume, first page and DOI against the record; whether the DOI belongs to that paper; retractions and expressions of concern Whether the paper supports your sentence, works that none of its sources hold, and lists longer than 30 per check Free, no sign-up Crossref’s Simple Text Query says it provides "space to match 1,000 references per submission", and tells you that "To check the accuracy of a reference, click on the link that is returned with the reference." OpenAlex describes itself as "a free and open catalog of the world’s research" that indexes "half a billion scholarly works", and its pricing page says the data is "released under a CC0 public-domain license". Litrevu’s reference checker looks in Crossref and OpenAlex, then in CORE’s university repositories and on the page a reference links to, and its page states that "No AI model is involved: fixed rules decide each verdict." ## What is the fastest way to check whether a reference is real? Paste the whole reference list into a tool that matches each entry against Crossref, the registry publishers deposit DOIs into, then open whatever it flags. Crossref’s Simple Text Query takes up to 1,000 references in one submission and returns the matched DOI for each one, and Litrevu’s reference checker takes up to 30 references per check with no account. A reference that comes back with no match is not automatically fake. Book chapters, theses, conference papers and older articles often have no DOI at all, so a "no match" result on those entries is a signal to search by hand, not a verdict. A reference that comes back matched to a different paper from the one you typed is the result worth slowing down for, because a mismatch usually means the author, year or title in your bibliography is wrong, or that the reference was invented around a real DOI. ## How do you find references that are never cited in the text? To find references that are never cited in the text, match every in-text citation to an entry in the reference list, then match every entry in the list back to the text: any entry that no citation points to is uncited. Litrevu’s free In-Text Citation Checker runs both passes on a pasted essay or a .docx file, and lists "References you never cite", which its page defines as "An entry that nothing in your text points to." The In-Text Citation Checker also flags the opposite slip, a citation with no entry in the list, plus years and names that disagree between text and list (citing Braun and Clarke 2008 when the list says 2006) and citations that fit more than one entry. The check runs in the browser, so the essay is not sent to Litrevu, and the tool’s page says its matching rules were checked against APA Style, Cite Them Right Harvard, the Chicago Manual of Style, the MLA Style Center, the IEEE Reference Guide and the ICMJE Recommendations. Use it to find references never cited in the text before you run the reference list itself through an existence check. Each problem in a reference list has a different tool that catches it: Problem in your references Which tool catches it A reference that does not exist Crossref Simple Text Query (no match) or Litrevu’s reference checker ("We could not find this"), then a manual catalogue search Wrong year, first author, volume or page Litrevu’s reference checker ("Found, but details differ") A real DOI attached to the wrong paper Litrevu’s reference checker ("The DOI belongs to a different paper") A retracted paper Zotero (saved items with a DOI or PMID), Crossref’s retraction filter, Litrevu’s reference checker An entry never cited in the text Litrevu’s In-Text Citation Checker A citation with no entry, or a year that disagrees with the list Litrevu’s In-Text Citation Checker A paper that does not support your sentence No checker; open the paper and read the passage ## Why do real-looking references turn out not to exist? Real-looking references turn out not to exist because a language model producing a citation from memory is assembling a plausible string, not retrieving a record. Walters and Wilder measured fabricated citations directly in Scientific Reports (2023, volume 13, article 14045, doi 10.1038/s41598-023-41032-5): across 636 citations from 84 short literature reviews on 42 topics, "55% of the GPT-3.5 citations but just 18% of the GPT-4 citations are fabricated." Two cautions apply to carrying the Walters and Wilder percentages into 2026. The study tested GPT-3.5 and GPT-4 in 2023, and the models students use now are different, so the figures are not current rates. The finding that has held up is about appearance: a fabricated citation is formatted exactly as well as a real one, so nothing in the look of a reference list tells you which entries will survive a check. ## Is it enough to check that the DOI resolves? No. A resolving DOI proves that something was registered under that DOI, and says nothing about whether your entry describes that work correctly. Walters and Wilder found in Scientific Reports (2023) that "43% of the real (non-fabricated) GPT-3.5 citations but just 24% of the real GPT-4 citations include substantive citation errors", so a citation can point at a genuine paper and still carry the wrong year, journal or author order. A real DOI can also be attached to the wrong paper altogether, which is why Litrevu’s reference checker opens the record the DOI is registered to and compares its title, first author and year with the reference as written, rather than stopping at "the DOI works". Nor does a resolving DOI show that a work was peer reviewed, because preprints, theses and datasets get DOIs too. Litrevu’s peer review checker takes one DOI, link or title and shows what kind of work it is, such as a journal article or a preprint. The standard journals apply goes further than existence. The ICMJE Recommendations state that "Authors are responsible for citing references accurately and should be able to attest that the references cited support the associated statement", and that "To minimize bibliographic citation errors, references should be verified using either a bibliographic source, such as PubMed, or original sources." Attesting that a reference supports a statement is not something a DOI lookup can do; it means opening the paper. ## How do I check whether something I cited has been retracted? Check the reference against the Retraction Watch database, which Crossref now carries and which is "updated every working day by Retraction Watch", according to Crossref’s documentation . Crossref exposes the data two ways: a REST API filter, documented as api.crossref.org/v1/works?filter=update-type:retraction , and a CSV file in a GitLab repository, refreshed once per working day. If your reading already sits in Zotero, Zotero runs the retraction check for you. Zotero has flagged retracted items since version 5.0.67, announced on 14 June 2019, using Retraction Watch data: a flag in the items list, a warning with the retraction details at the top of the item pane, and a warning before you cite a flagged item through the word processor plugin. The catch is identifier coverage. Zotero’s announcement says the feature "is limited to items with a DOI or PMID", which it put at "about 3/4 of Retraction Watch data", so a saved item with neither identifier may not be flagged. Litrevu’s reference checker reads the same Retraction Watch data through Crossref, alongside OpenAlex’s retraction flag, and covers references you never saved in a reference manager. The Litrevu guide on how to check whether a paper has been retracted walks through the manual route. Citing a retracted paper counts as the author’s error: the ICMJE Recommendations say "Authors are responsible for checking that none of the references cite retracted articles except in the context of referring to the retraction." ## What do universities expect you to have checked? Universities expect students to have verified every reference themselves, and some spell out the method. The University of Pretoria’s Artificial Intelligence Guidelines in South Africa warn that "AI frequently generates plausible-looking citations to non-existent papers. Never cite a source without verifying its existence and relevance", and instruct: "For every reference AI provides, search UP Library Catalogue, Google Scholar, or Web of Science using the complete citation (author, year, title)." In the United Kingdom, the University of Oxford’s guidance on safe and responsible use of GenAI is shorter and broader. Oxford warns that "all tools can generate outputs that contain inaccuracies and fabrications", and that "You should always cross-check AI generated outputs against established sources to verify accuracy and identify erroneous information." Rules differ by institution and by country, so the version that matters for a submission is your own faculty’s. The safest working assumption is the stricter of the Pretoria and Oxford positions: verify the existence of every reference, and check the detail of every reference against the source document. ## Can an AI research tool check its own citations? Partly, and the answer depends on where an AI tool gets its citations from. A tool that searches a real index returns records that exist, because each record came out of a corpus rather than out of a model’s memory, so the existence problem mostly disappears; what remains is the sentence-level question of whether the claim written next to a citation is the claim the paper makes. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Each Litrevu citation opens to the highlighted passage on the page of the PDF it came from, and a pasted paragraph comes back with each claim marked Supported, Partly supported, Contradicted or Not in your papers. Litrevu’s how it works page is plain about the limit: its check "confirms that a citation points to a passage in your papers, not that the passage fully supports the sentence", so the reading is still yours to do. Litrevu’s job is narrower than searching the literature, and other tools beat Litrevu at their own part of the work. Scite, for one, tells you whether later papers have supported or contrasted a paper you are about to cite, which the Litrevu check has no view of. Tool Strongest at Elicit Discovery and systematic-review work across a corpus of more than 138 million papers, with screening and data extraction for systematic reviews Consensus Fast evidence search: an AI-powered academic search engine across peer-reviewed papers, with a Consensus Meter showing how many studies support or contradict a yes-or-no claim Scite Citation context: Smart Citations classify citing statements as supporting, contrasting or mentioning, so you can see how later work received a paper Research Rabbit Visual discovery: a citation-graph tool that starts from one paper and expands through related works, authors and topics, with built-in visualisations Litrevu Questions across papers you already chose, each answer opening to its passage, and checking your own paragraph against those papers Each row follows what that tool’s own pages say it is for. Plans change often, so this table carries no plan details; the Litrevu guide to the cheapest literature review software for postgraduate students covers the cost side. ## What does a checked reference list look like? A checked reference list is one where every entry carries a status, so you can see at a glance which entries need you to open the paper. Litrevu’s reference checker runs four checks per entry, on up to 30 entries per check: whether the work exists, whether the year, first author, volume, first page and DOI agree with the record, whether the DOI belongs to that paper, and whether a retraction or other notice is on record. The block below is a format illustration, not a real result. It uses the reference checker’s own status labels, the placeholders stand in for whatever your list contains, and no author, title, year or finding in it is real. FORMAT ILLUSTRATION ONLY, NOT A REAL RESULT (Author, Year) Found and matches . The record agrees with your entry (Author, Year) Found, but details differ . The record gives a different year (Author, Year) The DOI belongs to a different paper . Your DOI is real but registered to another work (Author, Year) No registration agency knows this DOI . A typo or a very new DOI also causes this (Author, Year) We could not find this . Search the library catalogue by hand (Author, Year) Found, but retracted . A retraction notice is on record for this paper The checker says "We could not find this" and never "fake", because books, theses, reports and some regional journals are missing from these indexes, and a real source should not be called invented because an index lacks it. A "Found and matches" status says the paper exists and the details line up, and nothing more: the sentence written next to that reference is unverified until you read the paper, which is the check the Litrevu guide on how to spot fake AI citations before you submit sets out by hand. ## How do you check a 60-item reference list? Check a 60-item reference list in two passes: an automated pass for existence, details and retractions, then a manual pass on everything the automated pass flags and on every claim. Crossref’s Simple Text Query takes all 60 references in one submission, since its stated limit is 1,000 per submission, and Litrevu’s reference checker takes the list in two runs at its limit of 30 references per check. The manual pass is where the work is. A flagged reference gets searched the way the University of Pretoria’s Artificial Intelligence Guidelines describe, by its complete citation (author, year and title), in a library catalogue, Google Scholar or Web of Science, one reference at a time. Then every sentence in the review that carries a citation needs the cited paper open beside it at least once, which is what the ICMJE Recommendations mean by being able to "attest that the references cited support the associated statement". Formatting the verified entries is a separate job again, covered in the Litrevu guides to Harvard referencing and APA citation format . ## Frequently asked questions ## What is the best tool to check citations in a research paper? The best free combination is two tools: Litrevu's In-Text Citation Checker to match every in-text citation to the reference list, then a reference checker such as Crossref's Simple Text Query or Litrevu's reference checker to confirm each entry exists and has not been retracted. No tool confirms that a paper supports the sentence citing it; that check means opening the paper. ## Which platforms provide reliable citation checking? Crossref, OpenAlex and Zotero are reliable for what each covers because they read published records: Crossref matches references to registered DOIs and carries the Retraction Watch database, OpenAlex is an open catalogue of about half a billion works, and Zotero flags retracted items with a DOI or PMID. Litrevu's reference checker combines Crossref, OpenAlex and CORE with fixed rules and no AI model deciding the verdict. ## Is there a free tool that checks if my references are real? Yes. Crossref's Simple Text Query accepts up to 1,000 pasted references and returns the DOI matched to each, and Litrevu's reference checker takes up to 30 references per check with no sign-up and flags retracted papers. OpenAlex's data is free under CC0 and works well for checking a single title or DOI. ## Is there a free alternative to referencechecker.org? Yes. For checking whether references exist and have been retracted, Crossref's Simple Text Query and Litrevu's reference checker are free, and Litrevu's In-Text Citation Checker matches citations to the reference list for free, with no account. ## What does a reference quality check cover? A reference quality check covers four things: whether each work exists, whether its recorded details (author, year, title, volume, pages, DOI) match the published record, whether its DOI belongs to that work, and whether it has been retracted or carries an expression of concern. A fuller check adds whether every in-text citation has an entry and every entry is cited, and whether each paper supports the sentence that cites it. ## Can a reference checker tell me if the paper actually supports my sentence? No. A reference checker confirms that a work exists and that the bibliographic details match a record, which is a different question from whether the paper's findings support the claim you wrote. The ICMJE Recommendations ask authors to "attest that the references cited support the associated statement", and the only way to do that is to open the paper and read the relevant passage. ## What should I do if a reference will not verify? Search for the reference once by its complete citation, author, year and title, in a library catalogue or Google Scholar, because books, theses and conference papers often have no DOI and fail an automated check while being perfectly real. If a careful manual search still finds nothing, remove the reference and the claim resting on it, then find a source you can read for that claim. ## Whose problem is it if a reference turns out to be fabricated? The author's. University guidance in South Africa and the United Kingdom puts the check on the student, not on the tool: the University of Pretoria's Artificial Intelligence Guidelines say "Never cite a source without verifying its existence and relevance", and the University of Oxford tells students to "always cross-check AI generated outputs against established sources". For journal submission, the ICMJE Recommendations put the duty on the author, including "checking that none of the references cite retracted articles". ## Ask Your Own Papers Litrevu reads the papers you have already gathered and answers your questions about them, with every citation opening to the passage in your own library it rests on, so the sentence level check that no reference checker can do for you starts one click from the claim. Paste a paragraph you wrote to see which of its claims your papers back. Litrevu is free to start, and no credit card is required. Start with your own papers ## Related Guides - Which AI Tools Cite Real Sources for a Literature Review? (2026) - How to Cite a Source Cited in Another Source (APA, Harvard, MLA and Chicago, 2026) - Do You Need a Citation After Every Sentence in a Literature Review? (2026) - Zotero vs Mendeley vs EndNote: Which Reference Manager Should You Use in 2026? --- # Can You Cite a Preprint in a Literature Review? (2026) URL: https://litrevu.com/blog/can-you-cite-a-preprint-in-a-literature-review Category: Literature Review Published: 2026-10-01 Summary: Yes, with three conditions. How to label a preprint, check whether a journal version exists, and reference it in APA and Harvard, plus what examiners expect. Literature Review ## Can You Cite a Preprint in a Literature Review? (2026) By Wasim Ghoor · 1 October 2026 · 10 min read Yes, you can cite a preprint in a literature review, and the guidance that exists tells you how to do it rather than telling you not to. The International Committee of Medical Journal Editors (ICMJE) puts it in one sentence: "When preprints are cited, the citation should clearly indicate that the reference is a preprint" ( ICMJE Recommendations, Preparing a Manuscript for Submission ). Three conditions make the citation defensible. Label the preprint as a preprint, check whether a peer reviewed version has appeared since and cite that version instead, and read the preprint in full before you cite anything from it. Preprint: a complete draft of a research paper that its authors have posted publicly before journal peer review. The United States National Library of Medicine defines preprints as "complete and public drafts of scientific documents, not yet certified by peer review", and warns that "any aspect of the research, including the results and conclusions, may change as a result of peer review" ( PMC, NIH Preprint Pilot ). ## What is the difference between a preprint, an accepted manuscript and the version of record? A preprint has had no peer review, an accepted manuscript has passed peer review but has not been formatted by the publisher, and the version of record is the final published article with its journal citation. The table sets the three side by side, because the version you read decides the reference you write. Version Peer reviewed? How to recognise it What goes in your reference Preprint No. bioRxiv’s own words: "not peer-reviewed, edited, or typeset before being posted online" A server name and a posting date instead of a volume and issue; the DOI opens the server’s landing page The preprint, labelled as one, with the repository name and its own DOI Accepted manuscript (post print) Yes The author’s own layout, often in a university repository: "the author’s copy of the article after it’s been reviewed and corrected, but before the publisher has formatted it for publication" The journal article, referenced "in the same way that you would reference a print journal" Version of record Yes Journal name, volume, issue and pages, on the publisher’s site The journal article Sources: bioRxiv, About for the preprint row, and De Montfort University Library for the post print row, both read in October 2026. Each version also carries its own DOI. Crossref asks preprint publishers to give every new version of a preprint a new DOI, linked to the others through a relationship of type isVersionOf , and to link the preprint to its accepted manuscript or version of record once one exists ( Crossref, Introduction to posted content ). The preprint and the journal article are therefore two records with two DOIs, which is the machine readable reason a reference manager sometimes holds two entries for what looks like one paper. De Montfort University’s referencing guidance draws the same line for students. A post print is referenced like the journal article, while for a preprint the reference has to make it clear "that this is a preprint and not the final approved article" ( De Montfort University Library ). ## Will my examiner accept a preprint as a source in a literature review? There is no universal rule, and that is the honest answer: acceptance depends on your discipline and your department, not on a single global policy. University guidance that does exist leans towards permitting preprints with a visible label. The University of Surrey states that "as long as the preprint versions are clearly indicated as non-peer-reviewed, it is the responsibility of the readers to evaluate the research" ( University of Surrey, Preprints guidance ). The second condition comes from the same direction. A December 2025 guide by Sharjeel Chaudhry and Zarmina Ehtesham on Springer Nature’s Research Communities site tells researchers to "Check for a peer-reviewed version. If the paper is later published in a journal, always cite the final version instead of the preprint" ( Citing a Preprint, Research Communities by Springer Nature ). In practice an examiner reads one labelled preprint supporting a claim that also has peer reviewed support very differently from a chapter resting on unreviewed papers. Ask your supervisor before a section leans on preprints, and where a departmental rule exists, follow the rule. ## How often do a preprint’s results change before it is published? Often enough that the check matters, and there is a measured figure for it. Sommer and colleagues followed 329 prevention research preprints posted to medRxiv: 48.9% were published in a peer reviewed journal within 12 months, with a median of 5.3 months from upload to publication. Among those published, the magnitude of the primary outcome effect estimate changed in 16.8%, with a major change of more than 25% in 4.4%. The style or wording of the conclusion changed in 42.2%, and its content in 3.1% ( Sommer et al., 2023, Scientific Reports 13, 17034 ). Sommer and colleagues are blunt about what that means: "The reliability of preprint articles for evidence-based decision-making is questionable." Read the figures for what they are, though. The analysis covers prevention research, not every field, and the content of most conclusions survived peer review unchanged. What the analysis rules out is the assumption that a preprint and its published version say the same thing, so the number you quote in a literature review should come from the version you actually read. ## How do I check whether a preprint has since been published in a journal? Start at the preprint’s own landing page, because as of October 2026 the servers do most of this work for you. bioRxiv "will usually automatically add a link to the published version within several weeks of journal publication", and asks readers to wait two to three weeks before contacting staff if that link has not appeared ( bioRxiv, About ). Crossref requires the preprint publisher to link the preprint to its accepted manuscript or version of record within seven days of a match alert, with the link shown where a reader sees it without scrolling ( Crossref ). Those matches run on the title and the first author, and bioRxiv notes that a match is sometimes missed "because the title or authors have changed". So a missing link is not proof that no journal version exists. Three checks catch almost everything. Open the DOI and see whether the landing page announces a published version. Search the exact title in a scholarly index, since a changed title is the usual reason an automatic match fails. Then search the first author’s surname with two distinctive words from the title, which finds papers whose title and author order both changed. Litrevu’s free reference checker does something narrower, and it is worth being clear about the limit. The reference checker takes a pasted reference list, tests each entry against Crossref, OpenAlex and doi.org, and flags retractions. It does not report whether a preprint has since been published in a journal, so that check stays manual, one preprint at a time. For retractions across a finished list, our guide on how to check whether a paper you cited has been retracted covers the same sources. ## How do I reference a preprint in APA and Harvard? Both styles keep the author, year and title you already know and then point at the version you read. APA 7th names the repository and gives the preprint’s DOI, and Cite Them Right Harvard adds an explicit [preprint] label. Augusta University’s APA guide also warns that the DOI must take you to "the article you found, e.g. the preprint, not to the formally published version" ( Augusta University, APA 7th Citation Guide ). Style Template, as the guide gives it Where the preprint status shows APA 7th Author, A. A., & Author, B. B. (Year). Title of article in sentence case. Title of Repository or Digital Archive in Title Case. https://doi.org/xxxx The repository name, in the place a journal name would go, and a DOI that resolves to the preprint Harvard (Cite Them Right) Author (Year) ‘Title of article’. To be published in Title of the journal [preprint]. Available at: URL (Accessed: date). The [preprint] label; a DOI can replace the URL Templates copied from Augusta University’s APA 7th guide and De Montfort University’s Cite Them Right Harvard guidance, read in October 2026. Harvard is a family of house styles rather than one standard, so check your own institution’s version before copying the second row. The common mistake is a hybrid: the preprint’s text with the journal’s reference. Side by side, with placeholder elements: - Incorrect, if you read the preprint: Author, A. A. (Year). Title of article. Journal Name, Volume (Issue), pages. https://doi.org/[journal DOI] - Correct, if you read the preprint: Author, A. A. (Year). Title of article. Repository Name. https://doi.org/[preprint DOI] The first entry sends your reader to a version you never opened, and if a number moved in review, the number in your sentence will not be on the page they land on. Yes, this is pedantry. It is also the check an examiner can run in under a minute. Some guides add [Preprint] after the title in APA as well, and the Research Communities guide quoted above puts the reason in one line: "Always include the word ‘Preprint’ in your citation so readers understand the work is not peer-reviewed." If your department’s APA guide shows the label, use it. Element order is otherwise the ordinary one for each style, set out in our APA citation format guide and Harvard referencing guide , and the rules for a source you only met inside another paper are in how to cite a source cited in another source . ## What should the sentence in my literature review actually say? Name the preprint status in the prose, not only in the reference list, because a reader who skims your paragraph never reaches your bibliography. ICMJE’s requirement that a citation "clearly indicate that the reference is a preprint" is satisfied in the reference list, and good practice in a literature review is to satisfy it twice, once where the claim appears. Two shapes carry it without sounding defensive. "In a preprint posted to medRxiv, (Author, Year) report a similar pattern, though the paper has not yet been peer reviewed." Or, where a preprint sits beside reviewed work: "Two peer reviewed studies (Author, Year; Author, Year) and one preprint (Author, Year) point the same way, and the preprint is the weakest of the three." Those bracketed tokens are placeholders for your own sources, not real citations. Avoid quoting a preprint’s abstract as though it were a settled finding. The reason is measurable: in Sommer et al., 2023 , 4.4% of published prevention preprints had a primary effect estimate that moved by more than 25% between the preprint and the journal version. A hedged sentence costs nothing in an examiner’s eyes. ## Should I search preprint servers at all when building a literature review? Search them if your field posts there and your review is meant to be current, and record that you did. The University of Stirling’s systematic review guidance states plainly that "You may wish to include searches for preprints in your systematic review", listing preprint servers alongside other grey literature sources ( University of Stirling, Systematic Reviews: Grey Literature ). bioRxiv carries the life sciences and medRxiv the health sciences, and both servers’ own cautions belong in your methods note. medRxiv tells readers that "Preprints are preliminary reports of work that have not been certified by peer review. They should not be relied on to guide clinical practice or health-related behavior and should not be reported in news media as established information" ( medRxiv, About ), and bioRxiv states that "No endorsement of an article’s methods, assumptions, conclusions, or scientific quality by bioRxiv or openRxiv is implied by its appearance in bioRxiv" ( bioRxiv, About ). If your review has an inclusion and exclusion table, put the decision in it: preprints included and labelled, or excluded with a reason. Our guide to grey literature in a literature review covers the same decision for theses, reports and conference papers, and how recent your sources need to be covers the related question of what a currency claim actually requires. ## What happens to a preprint I upload to Litrevu? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Litrevu cites only the papers in your library and reads the PDF you uploaded, so if a journal version of that preprint appeared last month and is not in your library, it will not know. Checking for the published version, and naming the preprint status in your prose, both stay your job. The free tier covers 25 messages and 2 drafted sections every 30 days with no credit card, as of October 2026, which is enough to ask a mixed set of reviewed papers and preprints a few questions and see which claims rest on which. Here is the shape of a cited answer from a library that mixes preprints and reviewed papers, as a format illustration rather than a real result. The names, years and findings are placeholder tokens, not sources: Early work on this question has appeared mainly outside the journal literature. (Author, Year) report the pattern in a preprint posted to medRxiv, and (Author, Year), in a peer reviewed cohort study, describe a comparable association. The preprint has not been peer reviewed, so the claim rests mainly on the reviewed study. Every claim that comes back is yours to verify against the passage it cites. The sentences in your review should be ones you wrote yourself and can defend in a viva. ## Common questions about citing preprints ## Can I cite a preprint in my thesis or dissertation? Yes, on three conditions. Check whether a peer reviewed version exists and cite that version if it does, read the preprint itself rather than its abstract, and label the reference as a preprint so your examiner is not surprised. Departmental rules vary, so confirm with your supervisor before a section leans on preprints. ## Do preprints count as peer reviewed sources? No. The United States National Library of Medicine calls certification by peer review "the key distinction between a preprint and an accepted author manuscript or published article". Servers such as medRxiv run a basic screen for offensive or non-scientific content and for material that might pose a health risk, which is not a check on whether the methods or conclusions are sound. ## What if the preprint I cited was published after I submitted? Nothing you submitted becomes wrong, because you cited the version you read and labelled it honestly. If you are revising a chapter or responding to examiner comments, replace the preprint reference with the published version and check that the number you quoted still holds, since the primary effect estimate changed in 16.8% of published prevention preprints in Sommer and colleagues' 2023 analysis. ## How do I know whether a paper in my folder is a preprint? Look for a journal name, a volume and an issue on page one. A bioRxiv or medRxiv PDF carries the server's name and a posting date rather than a journal citation, and a preprint DOI resolves to the server's landing page, which Crossref requires to be labelled as a preprint where a reader sees it without scrolling. ## Can I cite a preprint that has been online for years without being published? You can, and the age is worth a sentence in your prose. Just under half of the prevention preprints in the 2023 Scientific Reports analysis reached a journal within 12 months, so a paper that has sat unpublished for several years may have failed review, may be in a slow pipeline, or may never have been submitted. Say which version you read and the date you read it. ## Is citing a preprint a form of academic misconduct? No. Citing a preprint accurately and labelling it as a preprint is ordinary scholarship, and the ICMJE recommendations describe how to do it. Misconduct would be presenting a preprint as a peer reviewed study, or citing a paper you never read. ## Ask Your Own Papers If your folder already holds the papers, including the preprints you decided to keep, the next job is knowing exactly what each one claims and how firmly. Ask Litrevu where your preprints agree with the reviewed studies and where they stand alone, and open each citation to read the passage behind it. It is free to start with no credit card required. Start with your own papers ## Related Guides - How Recent Do Sources Need to Be in a Literature Review? - Harvard Referencing: The Complete Guide with Examples - APA Citation Format: The Complete Guide with Examples - How to Check Whether a Paper You Cited Has Been Retracted --- # How to Turn Your Zotero Library Into a Literature Review (2026) URL: https://litrevu.com/blog/zotero-library-to-literature-review Category: AI & Research Writing Published: 2026-09-28 Summary: Zotero stores and cites your papers but will not synthesise them. How to get the PDFs out, what free storage covers, and which tool to use on your set. AI & Research Writing ## How to Turn Your Zotero Library Into a Literature Review (2026) By Samuel de Bruyn · 28 September 2026 · 9 min read Zotero will not write your literature review, and it was never built to. Zotero stores the papers, keeps the metadata tidy and formats the citations, so the reading across papers and the writing of the synthesis still belong to you. A research assistant you point at the files you exported can help with the reading. The working route is four steps: tidy the collection in Zotero, get the PDFs onto disk, add those specific files to a tool that cites only them, then check what it shows you against the source and write the synthesis yourself. A reference manager, defined: a reference manager is software that stores bibliographic records and their attached files, keeps them organised in collections, and formats citations and bibliographies in a chosen style. That is the whole job description. Synthesis, the part where you say what twelve papers add up to, sits outside it. ## Can Zotero write a literature review on its own? No. Zotero is a reference manager, so it handles storage, organisation and citation formatting, and it stops there. It will produce a correctly formatted bibliography in seconds and it will not tell you that four of your papers disagree about the same variable. What Zotero does give you is a clean starting position, and that matters more than it sounds. Zotero’s documentation on attaching files states that "Zotero automatically renames files based on the parent item’s bibliographic data, so you can easily find files by title, author, or year even from outside Zotero." A folder of PDFs pulled out of Zotero therefore arrives already labelled, rather than as forty files named with download codes. Any tool you hand them to, and any human reading over your shoulder, can tell the papers apart immediately. The honest framing: Zotero solves the bookkeeping. The literature review is the part after the bookkeeping. ## How do I get my PDFs out of Zotero and into another tool? Right-click an item and choose "Show File", and Zotero reveals the actual PDF in your file manager, ready to copy somewhere else. For a whole collection, the files already sit on your disk inside the Zotero data directory, where, per Zotero’s documentation , "each file has its own subdirectory, which is named with a random 8-character string." Those random subdirectory names are why people assume the files are locked away. They are not. Because Zotero renames the files themselves after the parent item’s bibliographic data, you can search the data directory by filename and find what you need without opening a single PDF. One check before you assume the papers are there at all. Zotero distinguishes stored files from linked files, and the difference decides whether you actually have copies. Zotero’s documentation says that with linked files "Zotero only stores a link to the location of the original file on your computer. Linked files are not synced, nor are they deleted if the attachment item is deleted in Zotero." Stored files are the default, and Zotero recommends them. If you chose linked files years ago and have since changed laptops, some of those links point at nothing, and you will find that out faster by checking now than by discovering it mid chapter. ## Will my Zotero library fit in the free storage tier? Zotero gives every account 300 MB of file storage free, and the paid tiers as of September 2026 are 2 GB at $20 a year, 6 GB at $60 a year, and unlimited at $120 a year, quoted on Zotero’s own storage page as "equal to $1.67 per month", "$5 per month" and "$10 per month" respectively. For one literature review chapter this rarely bites. It bites on a library that has been accumulating since honours, full of scanned chapters and supplementary files. Worth knowing before you pay: Zotero states that "Zotero groups can also use Zotero Storage at no additional charge" and that "Group file storage always draws from the storage account of the group owner." So a supervisor or lab that already pays for a plan can carry a shared collection without every student buying their own. Storage is also a scoping signal. If a collection has swollen past what you can read properly, that is the moment to cut it down rather than to upgrade it, and our dissertation word count calculator will estimate how long your literature review should be for your word limit, and roughly how many sources to cite in it. ## Which tool should I use on a set of papers I have already chosen? Use a discovery tool when you still need to find or screen papers, and a reading tool when the set is already decided. That distinction does most of the work, because a tool built to search a corpus of a hundred million papers or more is solving a problem you no longer have once your Zotero collection is final. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Here is the honest split, with what each free plan gives you as of September 2026, since that is what a postgraduate student is choosing between. Paid plans move often, so each row links to the vendor’s own plans page rather than carrying a figure that may be stale by the time you read this. Tool Use it when Free plan, as of September 2026 Plans Elicit You still need to find and screen papers Search across more than 138 million papers, chat with papers and import from Zotero; limited use of its Research Agent and Research Reports elicit.com Consensus You want a fast evidence summary for one question A free tier, with its current allowance listed on the plans page consensus.app Scite You want to know how a paper has been cited since, and whether later work supports or contrasts it A free Connect plan for using Scite inside other AI tools, without its Assistant or Search; a Zotero plugin shows citation data inside Zotero scite.ai Research Rabbit You want adjacent work mapped from papers you already hold Free forever: unlimited searches and collections, up to 50 seed articles researchrabbit.ai Litrevu Your set is chosen and you need to read across it: ask what it says, compare studies, check your own paragraphs 25 messages and 2 drafted sections every 30 days , with up to 20 papers, no credit card; paid passes are one-time purchases, not a subscription litrevu.com/pricing Three things I would rather tell you now than have you find out later. Elicit’s free plan lists import from Zotero, and Research Rabbit is built to bring your reference library into it, so if your question is "what am I missing next to this collection", either one reads a Zotero collection more comfortably than a tool that wants uploads. Research Rabbit’s free plan has a ceiling: it caps you at 50 seed articles, with larger reviews on the paid ResearchRabbit+ plan. And if you are still screening rather than reading a settled set, Elicit is a better use of your first hour than Litrevu is. ## Does Zotero warn me if a paper in my library has been retracted? Yes, and it has done since June 2019, when Zotero announced an integration with the Retraction Watch database . Retracted publications get flagged in the items list with detail in the item pane, and Zotero’s announcement states that when you cite a retracted item through the word processor plugin, "Zotero will warn you and confirm that you still want to cite it." A citation already in your document gets the same warning the next time you update the document’s citations, if the paper has been retracted since. The limit is the part to write down. The announcement says the feature was limited to items carrying a DOI or a PMID, which "covers about 3/4 of Retraction Watch data", and that Zotero hoped to support items without identifiers in a future update. So assume roughly a quarter of known retractions may sit outside what that check can match. The items least likely to carry either identifier are exactly the ones postgraduate work leans on in some fields: books, chapters, theses, institutional reports and regional journals. A second check on the finished reference list, as a list rather than paper by paper, narrows that gap without closing it. Our free reference checker takes a pasted list, matches it against Crossref and OpenAlex, and shows retractions and expressions of concern next to the reference. It covers up to 30 references per check and needs no account. It has a blind spot that overlaps Zotero’s: it cannot find records Crossref and OpenAlex do not hold, which includes many books, theses and reports, so those entries still need checking by hand. For the broader method, including what to do when a paper you have already built an argument on turns out to be retracted, see how to check whether a paper you cited has been retracted . ## What does an answer from your own Zotero papers look like? Ask how your papers measure the thing you study, and a good answer looks like a short account organised by theme, where each claim carries a citation pointing back to one of the files you uploaded, not to something found on the open web. The block below is a format illustration, not a real result. The citation tokens are deliberately empty so that nothing here can be mistaken for a finding from a real paper. Measurement approaches Three of the uploaded studies operationalise the construct through self report instruments (Author, Year; Author, Year; Author, Year), while the remaining two rely on observational coding (Author, Year; Author, Year). The self report studies report higher associations than the observational studies, and none of the five tests the two approaches against each other in the same sample. (Author, Year) attributes the divergence to instrument sensitivity; (Author, Year) argues instead that the samples differ in a way the instruments cannot account for. One property is worth checking on any AI answer you are handed: every citation in it should resolve to a file you uploaded, which means the number of distinct sources in the answer can never exceed the number of PDFs you put in. If it does, the extra sources came from somewhere you did not choose. The shape is the point: a theme as the unit, sources grouped by what they have in common, disagreement named rather than smoothed over, and every claim traceable to a specific uploaded file. That is the reason to ask your own collection rather than a general chatbot, which can produce a fluent paragraph citing papers that do not exist. Treat an answer like this as notes to think with, not text to paste: the synthesis you submit is yours to write. For the manual version of this process, how to turn your research papers into a literature review walks through it without any tool at all, and how to synthesize sources in a literature review covers the thematic grouping in more depth. ## How do I check my chapter before it goes near my supervisor? Open each cited PDF and confirm that the sentence in your chapter is actually what that paper says. The citation comes first, because a citation that is real but attached to the wrong claim is harder to spot than one that is simply invented. Litrevu can narrow where to look: paste a paragraph you wrote and it shows which claims your papers back, with the passages that decide it. You still read those passages. If an AI tool helped you read, write the chapter yourself all the same: many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution’s policy and declare how you used AI. Be clear about what automated checking can and cannot do for you. Our reference checker states its own limit directly: it cannot "tell you whether a source supports the sentence you cite it for." No automated check I know of does that reliably, which is why reading the source remains the job. A checker confirms that a reference exists, compares the year, first author, volume, first page and DOI against the record and names anything that differs, and flags retractions and expressions of concern. Whether the paper supports your sentence is a judgement only you can make, and it is the judgement your examiner is assessing. Then fix the formatting last, once the argument is settled, using Harvard referencing or APA citation format depending on what your department requires. Reformatting prose you are about to cut is wasted effort. ## Frequently asked questions ## Can I connect Zotero to Litrevu directly? No. Litrevu has no Zotero import, so the route is to export or reveal the PDFs from your Zotero collection and upload those files. Because Zotero renames attached files after the parent item's bibliographic data, the exported folder is already labelled clearly enough to select from without opening each file. The other direction does work: the references cited in a Litrevu document export as a BibTeX or RIS file, which Zotero imports. ## Is Zotero free to use? Zotero itself is free to install and use, and what costs money is online file storage above the free allowance. As of September 2026, Zotero gives 300 MB free, then charges $20 a year for 2 GB, $60 a year for 6 GB and $120 a year for unlimited. You can keep using Zotero locally without paying for storage sync at all. ## Should I use Elicit or Litrevu for my literature review? Use Elicit if you still need to find and screen papers: it searches more than 138 million papers, and its free plan imports from Zotero. Litrevu is not a search tool beyond one open-access search in its upload box. Use Litrevu if you have already chosen your papers and need to read across them: ask what they say, compare studies side by side, and check your own paragraphs against them. Using one and then the other, in that order, is a sensible workflow. ## Will my supervisor know I used an AI tool? Check your own institution's policy and disclose according to it rather than guessing, because the rules differ by university and often by department. Many universities do not allow AI-written text in submitted work, even after you edit it. The defensible position is text you wrote yourself and can account for line by line, with every citation checked against the paper it points to and a declaration of how you used AI, since that is what you will be asked about in a supervision meeting or a viva. ## How many papers do I need before synthesis is worth it? Enough that you can see themes repeating across them rather than reading each paper as a separate summary. If your collection is still small enough that every paper is making a different point, more reading will serve you better than synthesising, and a discovery tool like Research Rabbit, which maps adjacent work from up to 50 seed articles on its free plan, is the better next step. ## What happens if a paper in my library was retracted after I cited it? Zotero flags it if the item carries a DOI or PMID, and if the paper is retracted after you cited it, Zotero warns you the next time you update the document's citations through the word processor plugin. Zotero's announcement put that check's reach at about three quarters of Retraction Watch data, so check the finished reference list as well, and if a retracted paper is load bearing in your argument, the argument needs rebuilding rather than the citation quietly swapping out. ## Ask Your Own Papers If your Zotero collection is already the right set of papers, the remaining work is understanding what they say together, and that is the part Litrevu is built for. Upload the PDFs you chose, ask what they say, see the themes across them and where they disagree, and compare studies side by side, with every answer opening to its passage in those specific files. The synthesis you write stays yours. Litrevu is free to start, and no credit card is required. Start with your own papers ## Related Guides - Zotero vs Mendeley vs EndNote: Which Reference Manager Should You Use in 2026? - How to Turn Your Research Papers into a Literature Review - How to Check Whether a Paper You Cited Has Been Retracted - How to Organize Research Sources --- # How Recent Do Sources Need to Be in a Literature Review? (2026) URL: https://litrevu.com/blog/how-recent-should-sources-be-in-a-literature-review Category: Literature Review Published: 2026-09-24 Summary: There is no universal five year rule. What different universities require, what Cochrane and PRISMA actually mandate about search dates, and how to check. Literature Review ## How Recent Do Sources Need to Be in a Literature Review? (2026) By Wasim Ghoor · 24 September 2026 · 9 min read There is no universal five year rule. Some universities do set one, and Walden University’s doctoral guidance is a clear example, telling students that current research means "research conducted within the last five years" while foundational literature "will generally be older than five years". Other universities, including the University of Worcester in the UK, give no number at all and say the answer depends on your field. The rule that is actually written into methodology standards is not about the age of your sources at all. It is about the age of your search. That distinction is worth getting straight before you delete a single reference. Currency in a literature review means two separate things. The first is the publication age of the studies you cite, which is a convention your institution and discipline set, and which varies a lot. The second is the date you last ran your searches, which is a reporting requirement with an actual number attached to it. Students worry almost entirely about the first. Examiners and journals increasingly ask about the second. ## Do my sources have to be from the last five years? No, not as a universal requirement, although several universities do set five years as the default for current empirical research. Walden University’s doctoral literature review guidance tells students that "much of your literature review will focus on the current research being done in your field, meaning research conducted within the last five years" ( Walden University Library, Literature Review: Scope ). Southern New Hampshire University’s library sets a different default again, advising students to "use sources published in the past 5 years for research in the arts, humanities, literature, history, etc." ( SNHU Library, How old should or can a source be for my research? ). The University of Worcester in the UK declines to give a number at all. Its library guidance says "the age for a source to be considered ‘too old’ depends on the field of study and the type of research you are doing" ( University of Worcester Library, How old is too old? ). So three universities, three different positions, and none of them a rule you could apply blind. Check your own module handbook or rubric first, because where a number exists in writing, that number beats any general advice including this page. ## What do different universities and standards actually say about how old a source can be? The guidance splits into two groups: institutions giving a default publication age for sources, and methodology standards giving a maximum age for your search. These are the positions stated on each primary guidance page, read in September 2026. Walden’s and Rasmussen’s pages now sit behind a student login, so those two rows link to the most recent public archived copy. Source Age of what Number stated In its own words Walden University Library Sources 5 years for current research "the foundational or seminal research in your field is almost always older than five years" Southern New Hampshire University Library Sources 5 years for arts and humanities, 2 to 3 years for faster paced fields "For faster-paced fields, look for sources published in the past 2-3 years" Rasmussen University Library Sources 5 years, with classic or seminal works sometimes acceptable "In nursing, the health sciences, and many other disciplines, it is accepted practice to limit sources to those published within the last 5 years." University of Worcester Library Sources None "depends on the field of study and the type of research you are doing" Williams College Libraries Sources None "It matters which discipline" Cochrane, conduct standard C37 Search 12 months before publication "run (or re-run) within 12 months before publication of the review or review update" Cochrane Hepato-Biliary Search 12 months, preferably 6 "more than 12 months (preferably six months) from the intended publication date" PRISMA 2020, checklist item 6 Search None, but the date must be reported "Specify the date when each source was last searched or consulted." Read down that table and the pattern is clear. Every number attached to source age is departmental. Every number attached to search age is methodological. ## Which subjects expect sources newer than five years? Fast moving applied fields expect sources newer than five years, and some set the bar at two to three. Southern New Hampshire University’s library guidance is explicit that "for faster-paced fields, look for sources published in the past 2-3 years", and it names sciences, healthcare, nursing, engineering, business, finance and social sciences as the disciplines it has in mind. Clinical fields give a reason rather than a convention. Rasmussen University’s nursing guidance justifies its five year limit on the grounds that "the use of sources older than 5 years may lead to clinical decisions that are not optimal for patients" ( Rasmussen University Library, Why do my sources need to be published within the last 5 years? ). That is a patient safety argument, not a formatting preference, which is why nursing and allied health supervisors tend to be strict about it where a history supervisor would not be. Williams College Libraries puts the spread plainly: "science papers need up-to-the-minute information, while social studies projects can use works published years ago; humanities papers often rely on sources decades or centuries old" ( Williams College Libraries, Evaluating Sources: Currency ). ## When is it fine to cite a paper from the 1980s? It is fine when the paper is the foundational or seminal work your field still builds on, and every university guidance page reviewed for this article carves out that exception. Walden University states that "the foundational or seminal research in your field is almost always older than five years", and adds that foundational literature "may have been published in a book, and not in a peer-reviewed journal", which matters if your rubric also demands peer reviewed sources. The University of Worcester makes the same allowance in wider terms, saying that "classic studies, key papers, or theories can be relevant regardless of age, and are often referred to in later works", and that "historical texts, original works of literature, and philosophy are useful in some subject areas, again, regardless of age." The practical test is whether the old paper is doing work that a newer paper could do instead. Citing a 1980s paper for the theory it introduced is defensible. Citing a 1980s paper for a prevalence figure, when three studies since 2020 report that figure, is the thing your examiner will circle. If you are unsure which category an old paper falls into, appraise it properly rather than guessing from its date. ## What currency rule is actually written into methodology standards? The one hard number in this area applies to your search date, not to your sources. Cochrane’s conduct standard C37 requires that searches for all relevant databases "be run (or re-run) within 12 months before publication of the review or review update, and that the results are screened for potentially eligible studies" ( Cochrane, Reporting search dates ). Cochrane Hepato-Biliary states the working version of the same rule for authors: searches "must be rerun close to publication if the initial search date is more than 12 months (preferably six months) from the intended publication date" ( Cochrane Hepato-Biliary, Searches for studies ). PRISMA 2020 then makes that date public. Checklist item 6 requires authors to "specify the date when each source was last searched or consulted" ( Page et al., The PRISMA 2020 statement, BMJ 2021 ), which means a reader can calculate how stale your evidence base was on the day you submitted. Those standards were written for systematic reviews , and a taught masters literature review is not held to them. They are still the clearest statement in the field of what "current" means, and a supervisor who says your review feels dated is usually reacting to a search that was run eighteen months ago and never repeated. ## How do I check whether my literature review has gone out of date? Rerun your exact search string , restricted to the period since you last searched, and count what comes back. If the rerun returns nothing relevant, your review is current and you now have a defensible date to report. If it returns papers you would have included, your review needs updating rather than defending, and the gap is usually in where you searched rather than in how hard you looked. A useful benchmark for how stale is too stale comes from Cochrane’s conduct standard C37, which requires that searches for a systematic review be run or re-run within 12 months before publication. A taught masters literature review is not bound by that standard, and 12 months is still a reasonable self-imposed limit for a dissertation chapter. Four checks are worth running together before you submit. Rerun the search with a date filter covering the months since your last search, using the same databases and the same string, so the comparison is honest. Read the titles rather than the abstracts on the first pass, because a rerun is a sweep and not a screening exercise. Check your key citations for retractions, because a retracted paper is a worse problem than an old one. Record the date you finished, so you can state it if you are asked. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Because its citations carry the author and year of your own papers, an answer that leans on one decade makes an ageing evidence base visible on the page rather than buried in a folder. The shape of that output looks like this. The block below is a format illustration, not a real result, and the tokens stand in for whatever your own uploaded papers say: Three studies report on this outcome. (Author, Year) and (Author, Year) both find an effect in the same direction, while (Author, Year) reports no significant difference and attributes this to a different measurement window. Every (Author, Year) token in a real answer opens the passage it came from in one of the PDFs you uploaded. Written out that way, a paragraph where every year in the brackets sits in the same decade tells you something a reference list sorted alphabetically never will. ## Which tools help you check that a literature review is current? Different tools solve different parts of the currency problem, and no single one covers it. The table below compares what each tool is actually best at, with no pricing comparison, because tool pricing changes often enough that you should read it on the vendor’s own page. Tool Best at What it will not do Elicit Searching and screening a large paper corpus, which is the job when the question is what has been published since you last searched Write the review: by its own description it produces reports, tables, summaries and structured comparisons, not prose literature reviews Scite Showing whether later papers support, contrast or simply mention a paper you cite Draft anything: it is a citation index, not a drafting tool Research Rabbit Starting from one key paper and expanding through related works, authors and topics to find newer work that builds on it Write or draft anything Litrevu Reference Checker Checking a pasted reference list against Crossref and OpenAlex, including whether a paper has been retracted Tell you whether a real, unretracted paper is still the most current evidence Litrevu Answering questions about the papers you have already gathered, with each citation opening its passage in the uploaded PDF Tell you what has been published since you last searched: it cites only the papers in your library Elicit genuinely beats Litrevu at the first job on that list. If your problem is that you have not found the recent papers yet, a screening tool is the right answer and Litrevu is not, because Litrevu works from papers you have already selected. Scite is likewise the better choice if your specific worry is that a paper you cite has been contradicted since. ## What should I do if my supervisor says my sources are too old? Ask for the number, in writing, before you change anything. Supervisors mean different things by "too old", and the guidance they are drawing on ranges from two years in fast moving applied fields to no limit at all for theory, so the correction you make depends entirely on which they meant. Once you have the number, find the rule in your own handbook or rubric and quote it back, because a written departmental threshold settles the question faster than any argument about convention. Then rerun your search for the period since you last ran it, so you are arguing from evidence rather than from memory. The fix is usually not deletion. Separate your reference list into foundational work and current empirical work, and the real complaint normally becomes visible: not that old papers are present, but that recent ones are missing. If the rerun genuinely turns up little, say so explicitly in your methodology, along with the date you last searched. A stated search date is what PRISMA 2020 item 6 asks of published reviews, and it turns a vague criticism into a checkable claim. ## Frequently asked questions ## Is the five year rule real? It is a real convention at some institutions and not a universal rule. Walden University and Rasmussen University both use five years as a default for current research, Southern New Hampshire University applies five years to arts and humanities but two to three years to faster moving fields, and the University of Worcester gives no fixed number at all. Your own rubric or handbook overrides all of them. ## Can I cite a paper from 1975 in a 2026 literature review? Yes, if it is foundational work your field still builds on. Walden University’s guidance states that seminal research in a field "is almost always older than five years", and the University of Worcester says classic studies and theories "can be relevant regardless of age". Cite the old paper for the theory or method it introduced, not for a statistic that newer studies have since updated. ## How recent does my search have to be, as opposed to my sources? Cochrane’s conduct standard C37 requires searches to be run or re-run within 12 months before a review is published, and Cochrane Hepato-Biliary advises rerunning if the initial search is more than 12 months, preferably more than six, from the intended publication date. Those standards bind systematic reviews rather than taught masters work, but they are the clearest benchmark available for what counts as a current search. ## Do I have to say when I last searched? For a published systematic review, yes. PRISMA 2020 checklist item 6 requires authors to "specify the date when each source was last searched or consulted". For a dissertation chapter it is usually optional, and it is still worth stating, because it converts a subjective complaint about dated sources into a fact an examiner can check. ## My field barely has any recent papers on my topic. What then? Say so directly in the review rather than padding the reference list with loosely related recent work. State the date you last searched, describe the databases and the string you used, and name the gap. A review that documents a thin recent evidence base is doing its job, and the absence of recent studies is often itself the finding that justifies your research question. ## Ask your own papers If you have already gathered your papers and checked that your search is current, the next job is understanding what that pile says. Litrevu reads the papers you add and answers your questions with a citation to the exact passage behind each claim, so you can see which findings rest on recent work and which on older studies. It is free to start, and no credit card is required. Ask your own papers Litrevu helps you read and check; the writing is yours. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution’s policy and declare how you used AI. ## Related Guides - How to Write a Search Strategy for a Literature Review - How to Update an Existing Literature Review (2026) - How to Check Whether a Paper You Cited Has Been Retracted (2026 Guide) - 10 Common Literature Review Mistakes (and How to Avoid Them) --- # Can You Use NotebookLM to Write a Literature Review? (2026) URL: https://litrevu.com/blog/can-notebooklm-write-a-literature-review Category: AI & Research Writing Published: 2026-09-21 Summary: NotebookLM answers questions about the PDFs you upload, with in-line citations. Here is what that covers for a literature review in 2026, and where it stops. AI & Research Writing ## Can You Use NotebookLM to Write a Literature Review? (2026) By Samuel de Bruyn · 21 September 2026 · 9 min read NotebookLM will not hand you a finished literature review. It answers questions about the PDFs you have uploaded and shows which passage each answer came from, which covers the reading stage well and stops before the writing stage. Google’s own description of the product is that you "chat with your notebook to get grounded information based on your sources with clear in-line citations", and a chat transcript is not a review. NotebookLM, defined: NotebookLM is Google’s source grounded research assistant. A user uploads their own documents, and NotebookLM answers questions using those documents, with in-line citations pointing back to the passage each answer came from. Google documents the supported uploads as "PDFs, websites, YouTube videos, audio files, Google Docs, or Google Slides" ( Google, Learn about Gemini Notebook ). ## What does NotebookLM actually do with the PDFs I upload? NotebookLM reads the uploaded files and restricts its answers to them, attaching an in-line citation to each claim so the researcher can click back to the sentence it came from. That is the whole mechanism, and it is the reason NotebookLM behaves differently from a general chatbot: the answer is bounded by the sources sitting in the notebook rather than by the open web. Two caveats come from Google itself. The first is accuracy: the product "can make mistakes and its answers don’t reflect Google’s views". The second is a quiet one about citation granularity, from the product FAQ: "If your source content is too short, Gemini Notebook references the entire document without a cited individual text from your source" ( Google, Gemini Notebook frequently asked questions ). A short source, in other words, gets cited as a whole document, not as a line you can check in ten seconds. One naming note, because it causes confusion when searching for help. As of September 2026 Google’s help centre for this product is published as Gemini Notebook, with the overview article titled "Learn about Gemini Notebook" and the FAQ written throughout in the same name, while the help URLs and the name most researchers still use remain notebooklm. If a support page calls it Gemini Notebook, you are in the right place. ## How many papers can I load into one NotebookLM notebook? Fifty, on the free tier, as of September 2026. Google’s limits page sets sources per notebook at 50 on the free plan, 100 on Plus, 300 on Pro and 500 or 600 on the two Ultra tiers, with 100 notebooks per user on free and 500 on Pro ( Google, Gemini Notebook plan limits ). Plan Sources per notebook Notebooks per user Standard (free) 50 100 Plus 100 200 Pro 300 500 Ultra (20TB) 500 500 Ultra (30TB) 600 500 Fifty sources is a comfortable ceiling for a taught masters review, where the reading list is usually in the twenties or thirties. It is tight for a systematic review, where the screening set runs into the hundreds before exclusion, and the screening work has to happen somewhere other than NotebookLM first. Litrevu has a separate walkthrough of how to screen a large abstract set down to a readable pile . ## Has anyone actually tested NotebookLM on a literature review? Yes. Shor, Greene, Sumberg and Weingrad published an evaluation in the journal Psychiatry in 2026 (volume 89, issue 1, pages 82 to 91, doi:10.1080/00332747.2025.2541531 ). The team uploaded 22 papers from the Army Study to Assess Risk and Resilience in Servicemembers and put a series of literature review questions to NotebookLM about a hypothetical research paper. Their finding is the useful part for anyone deciding whether to lean on the tool. The authors report that "the variability and utility of responses" were "determined in large part by the ability to write meaningful prompts and the extent to which new prompts provided additional information", and conclude that the utility of NotebookLM "will likely vary by the quality of source material uploaded into the program and the researcher’s familiarity with prompt generation". That is a study of 22 papers and one research team, not a benchmark, and it is worth reading as a description of the workflow rather than a score. ## Where does NotebookLM stop and a literature review start? NotebookLM answers one question at a time. A literature review is a single piece of connected prose that groups studies by theme, states where they agree and where they contradict each other, and names the gap the new research will fill. Those are different units of work: twelve good answers about twelve papers are not a themed synthesis, and assembling them into one is the part a marker is actually grading. The 2026 evaluation of NotebookLM by Shor and colleagues in the journal Psychiatry describes the same shape from the inside, reporting that the team reached a usable mock review through "the iterative refinement of output" across repeated prompts rather than through a single request. If you want the mechanics of the synthesis step itself, Litrevu has a step by step guide to synthesising sources rather than summarising them one by one . The other thing NotebookLM does not produce is a reference list in your required style. In-line citations inside a chat window point at your uploaded file, which is exactly what you want while reading, and it is not a Harvard or APA reference list you can paste into a chapter. ## Is it safe to upload papers and unpublished drafts to NotebookLM? Your own published PDFs, generally yes. Someone else’s unpublished manuscript, often no, and the rule is not Google’s. Elsevier’s generative AI policy states that "Reviewers should not upload a submitted manuscript or any part of it into an AI tool as this may violate the authors’ confidentiality and proprietary rights", and applies the same sentence to editors ( Elsevier, generative AI policies for journals ). If you are peer reviewing while doing your own postgraduate work, that manuscript stays out of any notebook. On Google’s side, the product FAQ states "Your data will never be shared by Gemini Notebook". Note what that sentence covers and what it does not: it is about sharing, and your institution may still have its own rule about uploading supervisor drafts, participant data or anything under an ethics condition. Elsevier’s policy also says authors "should disclose the use of AI tools for manuscript preparation in a separate AI declaration statement", so the disclosure habit is worth building early, and Litrevu has a template for writing an AI-use disclosure . ## NotebookLM, Elicit, Consensus, Scite, Research Rabbit or Litrevu: which one do I need? Pick by the stage you are stuck on, because these tools do not overlap as much as their marketing suggests. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Tool Strongest at What you have when you finish NotebookLM Answering questions about a set of documents you uploaded, with in-line citations back to the passage A chat history and notes, grounded in your files Elicit Finding and screening papers across a large corpus A shortlist of papers and extracted fields Consensus A fast evidence summary for a single question An answer to one question, with the studies behind it Scite Citation context, whether a paper supports or contrasts a claim A read on how a paper has been received Research Rabbit Mapping a citation network visually to discover adjacent work A map of adjacent work you had not found Litrevu Working through the papers and reports the researcher already chose: cited answers, side-by-side comparisons and checks of your own writing against them Answers and comparison tables whose citations open the passage, and references in your citation style Read that table as capability rather than price, and note where the honest losses are. NotebookLM beats Litrevu on interrogating a mixed pile of material, including videos and web pages, and it is free to start with a Google account. Elicit beats Litrevu at the search and screening end, since Litrevu starts from papers you have already chosen. Research Rabbit finds adjacent work that neither of the others will surface. ## What does a cited answer about your papers look like? It reads as prose with each citation attached to its claim, grouped by theme rather than by paper. The block below is a format illustration of an answer to “how do my papers measure adherence?”, not a real Litrevu output, so the citations are placeholder tokens rather than invented authors: How do my papers measure adherence? Self-reported adherence remains the most common measure across the reviewed studies (Author, Year; Author, Year), although both papers note the tendency of self-report to overstate compliance. Pill-count methods appear in a smaller group of studies (Author, Year), where the authors argue that the discrepancy with self-report is large enough to affect conclusions. No study in this set compares the two methods in the same cohort, which may be a gap worth taking forward. Every (Author, Year) token in a real answer opens the passage it came from in one of the PDFs you uploaded. The shape is the point: a theme, claims, a citation attached to each claim, and a stated gap. That is material for your own synthesis, not text to paste in. Litrevu also has a longer worked walkthrough of turning a folder of papers into a review , and a comparison of which AI tools cite sources that actually exist . ## How do I use NotebookLM and still write the review myself? Use NotebookLM as the reading and interrogation layer, then write from your own notes. A workable sequence: upload the papers you have already selected, ask one question per theme rather than one question per paper, click through every in-line citation to the passage it names, and keep your own note of which paper supports which claim before any drafting starts. The verification step is not optional, and Google says so: the tool "can make mistakes and its answers don’t reflect Google’s views". The check that catches the most is the dullest one, which is opening the cited PDF and confirming the sentence says what the summary claims it says, page by page. Litrevu has a longer guide to spotting fake or mismatched AI citations before you submit . ## Frequently asked questions ## Can NotebookLM write my whole literature review for me? No. NotebookLM answers questions about documents you upload and returns those answers with in-line citations, as Google’s help centre describes it. NotebookLM does not produce a themed synthesis or a reference list in a required style, and anything it does produce needs checking against the source before it goes near a chapter. ## Does NotebookLM make up citations? NotebookLM answers from the sources sitting in your notebook rather than from the open web, which removes the most common form of invented citation, the reference to a paper that does not exist. NotebookLM can still misread what a passage says, and Google states plainly that the tool "can make mistakes", so each in-line citation needs a click through to the passage. ## How many PDFs can I upload to NotebookLM? As of September 2026, Google’s limits page lists 50 sources per notebook on the free tier, 100 on Plus, 300 on Pro and 500 or 600 on the Ultra tiers. Free users also get 100 notebooks. For a screening set in the hundreds, the screening has to be narrowed before the papers reach a notebook. ## Is it against the rules to use NotebookLM for my dissertation? That depends on your institution, and most universities now ask for disclosure rather than banning AI tools outright. For journal submissions, Elsevier says authors should disclose AI use in a separate declaration statement, and separately tells reviewers and editors not to upload submitted manuscripts into AI tools at all. ## What is the difference between NotebookLM and Litrevu? NotebookLM answers questions about a mixed set of uploaded material, including web pages and videos, and gives you a grounded chat history. Litrevu works from PDFs such as papers and reports: it answers questions about the papers you have chosen with a citation to the exact passage, compares studies side by side in a cited table, checks your own writing against your sources, and formats references in your citation style. ## Can I use NotebookLM for a systematic review? Partly. The 50 source ceiling on the free tier sits well below a typical systematic screening set, so the search, screening and exclusion stages have to happen elsewhere and be documented in a PRISMA flow diagram. Once the included set is final and small enough, a notebook is a reasonable place to interrogate it. ## Ask your papers, then compare them If you have already chosen your papers and want more than a chat about them, that is the gap Litrevu was built for. Add the PDFs you have gathered, ask what they say, compare their methods and findings side by side, and paste a paragraph you wrote to see which claims your papers back. Every citation opens the passage it came from, so verification is a click rather than a search. Litrevu is free to start, and no credit card is required. Ask your own papers ## Related Guides - The Best AI Tools for a Literature Review in 2026 (Honest Comparison) - Literature Review Software Pricing for Students (2026) - Elicit Alternatives for Literature Reviews: 5 Tools Compared - How to Turn Your Research Papers into a Literature Review --- # Do You Have to Cite Every Sentence? APA and Harvard Rules URL: https://litrevu.com/blog/do-you-need-a-citation-after-every-sentence Category: Literature Review Published: 2026-09-18 Summary: When one citation covers several sentences, which sentences need their own, and how to cite the same source again in APA and Harvard, with examples. Literature Review ## Do You Have to Cite Every Sentence? APA and Harvard Rules By Jessica McLaren · 18 September 2026 · 10 min read · Updated 25 October 2026 No. You cite every idea, finding or wording that came from a source, and a single citation can cover several consecutive sentences when the reader can tell those sentences are still reporting that source. What you can never do is drop one citation at the end of a paragraph and treat it as cover for everything above it. University referencing guidance draws the line at the reader’s certainty rather than at a fixed count per sentence, which is narrower than "every sentence" and wider than "once per paragraph". Over-citation and under-citation, defined: under-citation is presenting someone else’s idea, data or phrasing as if the thought were yours. Over-citation is repeating the same reference so often that the reader loses the argument in the brackets. A literature review paragraph is correctly cited when a reader can point at any sentence and say where that claim came from without guessing. ## How many citations does one literature review paragraph need? One citation per source per stretch of text that reports it, not one per sentence. The University of Central Missouri’s APA 7 guide puts the rule plainly: "when paraphrasing a key point in more than one sentence within a paragraph, cite the source in the first sentence in which it is relevant and do not repeat the citation in subsequent sentences as long as the source remains clear and unchanged" ( James C. Kirkpatrick Library, in-text citations guide ). In a literature review that arithmetic goes up, because a good review paragraph rarely reports one study. A paragraph that says three research groups found the same effect and a fourth did not is carrying four sources, so it carries at least four citations. The count follows the number of sources you are reporting, not the number of full stops. ## Can I put one citation at the end of the paragraph to cover all of it? No. Treating one citation as blanket cover for a paragraph is the habit university academic skills guidance warns about most directly. The Robert Gillespie Academic Skills Centre at the University of Toronto Mississauga states it directly: "Make it clear in every sentence whether you are summarizing the source in question. Do not put just one citation at the end of the paragraph and assume that it applies to the whole paragraph" ( Multiple References to a Single Source in a Paragraph ). The reason is the reader, not the rule. A paragraph with one citation parked at the end leaves a marker unable to tell which sentences are your analysis and which are the source’s. That same guide gives the failure case: without citations placed through the paragraph, "a reader might think that this interpretive point about Darwin was the author’s own insight rather than Gould’s". In a literature review, where your own critical voice is the thing being assessed, that ambiguity costs you credit for the analysis you did do. ## When can I leave the citation out of the next sentence? When the sentence carries a signal that the source has not changed. Saskatchewan Polytechnic’s library gives the condition: "When referring to the same source multiple times within the same paragraph, you cite only once if it is clear that the following sentences in the paragraph refer to the same source" ( Saskatchewan Polytechnic Library, Ask Us! ). The signal is usually a phrase such as "the authors also found", "that study concluded", "they went on to test". Alverno College Library’s APA 7 handout lists exactly those devices, and quotes the manual on the mechanics of repeating a narrative citation: "When the author’s name appears in the narrative, the year can be omitted in repeated citations... when multiple narrative citations to a work appear within a single paragraph" ( Alverno College Library, Referencing a Source Multiple Times in a Paragraph, 3/11/20 ). One limit is worth memorising, because it is where students most often over-extend the shortcut. The University of Toronto Mississauga guide warns that "A signal phrase can work only if the source is cited in a previous sentence", and that "A signal phrase is not enough when there is direct quotation". Start a new paragraph and the clock resets: the first sentence needs the full citation again. ## Which sentences always need a citation, whatever else you do? Five kinds, and no signal phrase or earlier citation excuses them. Two kinds need nothing. Sentence type Citation needed? What it has to carry Direct quotation Always Author, year and a page or paragraph number Close paraphrase of one study Always Author and year, in the first sentence reporting that study A number, effect size or sample figure Always The source that reported the figure A claim several studies support Always Every source you are leaning on for it Something you read about inside another paper Always The secondary citation format for your style Common knowledge in the general sense No Nothing Your own argument, gap statement or critique No Nothing, and do not bury it in brackets Two of those rows have teeth. On quotations, the University of Central Missouri guide is explicit that "Directly quoted citations should include a page number or paragraph number if there is no page number", while "Page numbers are optional for in-text citations that do not include a quotation". On paraphrase, the University of Cape Town’s Faculty of Health Sciences Writing Lab guidance is blunt that "Paraphrasing involves acknowledging the original source with proper referencing", and that everything outside common knowledge needs a reference: "All information that is not common knowledge, that is, accessed from peer-reviewed sources should be referenced accordingly" ( Understanding Plagiarism and Effective Referencing Strategies, UCT FHS Writing Lab, 2024 ). For the last row, changing the words is not what removes the need for a citation. Our guide to paraphrasing in academic writing covers the difference between a paraphrase and a reworded copy, and how to cite a source cited in another source covers the row about reading something second hand. ## What counts as common knowledge, so I can stop citing it? Information a general reader already knows, not information your field takes for granted. The UCT Writing Lab draws the boundary at the layman rather than the specialist: "Citations are not necessary to support statements of common knowledge. Common knowledge refers to information well known by everyone (layman), not just those in the discipline or experts." Its worked example is "Food contains calories and nutrients (no reference needed)". That test is stricter than most postgraduates expect. A sentence such as "burnout is associated with staff turnover in nursing" feels like common knowledge inside a nursing department. It is not: it is an empirical claim somebody measured, so a marker will expect the citation. If you are unsure, the cheap move is to cite it. An unnecessary citation costs you a bracket. A missing one is what plagiarism policies are written to catch. ## How do I cite a paragraph that synthesises four papers? Attach each claim to the source that supports it, then let the grouped citation carry only the part those sources genuinely share. A paragraph reporting four studies carries at least four citations, and usually five: one grouped citation in the sentence that states the shared finding, one on each study named individually, and one on the study that disagrees. In practice that looks like one parenthetical holding several sources for the common claim, then narrative citations that name authors when you start contrasting them, because naming the author in the sentence is what lets you compare two studies without a bracket after every clause. If your paragraphs are still coming out as one study per sentence with a citation on each, the problem is structural rather than referencing, and how to synthesise sources in a literature review covers turning a run of summaries into a claim-led paragraph. The citation density usually drops on its own once the paragraph is organised around claims rather than around papers. ## In APA, do you have to cite every sentence? The principle does not change. The mechanics do, and your department’s handbook overrides both. The rule that a reader must always be able to tell which sentences report a source runs through the referencing guidance published by the University of Cape Town, the University of Toronto Mississauga, Saskatchewan Polytechnic and the University of Central Missouri, all current as of September 2026. What differs is the detail: whether the year can be dropped in a repeated narrative citation in the same paragraph, how multiple sources are ordered inside one bracket, and whether page numbers are expected on paraphrase as well as quotation. Those live in your style guide and, more importantly, in your own institution’s handbook, which is the document a marker actually applies. Our APA citation format guide and Harvard referencing guide cover the mechanics for each. Check them against your handbook rather than the other way round. ## How do I check a finished draft for missing citations? Read the draft one paragraph at a time and ask, for each sentence, "whose claim is this". Every sentence should have an obvious answer: a named source, or you. The sentences that stall are the ones to fix, and they are almost always either a claim you absorbed while reading or a figure you copied out of a table. Then check two things that silent-fail. Every direct quotation needs its page number, and every reference in the list needs to exist. If any part of your reading list or reference list came out of an AI tool, verify each one at the source before you submit, because a reference that is formatted perfectly and does not exist is still a fabricated citation. Our guide to spotting fake AI citations before you submit sets out the check, starting with the DOI. ## Where does Litrevu fit? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Paste a paragraph you wrote and it shows which of your claims your papers back and the passages that decide it, which is the "whose claim is this" check run against your own library, sentence by sentence. It does not settle the question for you. It shows what your papers say about each claim; the citation decisions in your final submission are yours. Litrevu is free to start with no credit card, as of September 2026. Here is the citation pattern to aim for in a synthesis paragraph, as a format illustration rather than a real output. The tokens stand in for real references: Three studies report the same direction of effect (Author, Year; Author, Year; Author, Year). Author (Year) measured it in a clinical sample and found the association held after adjustment. The authors also note a limitation in how exposure was recorded. One study reports the opposite pattern (Author, Year), which the authors attribute to a difference in measurement. Note the citation pattern rather than the content: one grouped citation for the shared claim, a narrative citation when a single study is discussed across two sentences, no repeated citation in the sentence that continues that study, and a fresh citation for the disagreeing study. ## Frequently asked questions ## Do I need a citation in every sentence of my literature review? No. A citation is needed in the first sentence that reports a source, and again whenever the source changes or a quotation appears. Consecutive sentences reporting the same study can run on one citation as long as a signal phrase keeps the source obvious to the reader. ## Is one citation at the end of a paragraph enough? No. The University of Toronto Mississauga’s academic skills guidance says directly not to put one citation at the end of a paragraph and assume it covers the whole paragraph. A marker reading the paragraph cannot tell where the source stops and your analysis starts, and that ambiguity is what gets flagged. ## Do I have to cite a paraphrase, or only a direct quote? Both. The University of Cape Town’s Writing Lab guidance states that paraphrasing involves acknowledging the original source with proper referencing. Changing the wording changes nothing about whose idea it is, and a quotation adds one more requirement on top: a page or paragraph number. ## How many citations is too many in one paragraph? There is no number, but if the same reference appears in five consecutive sentences, the paragraph is usually reporting one study instead of building a claim. Rewrite it so the claim leads and the study supports it, and the repetition disappears without removing a single required citation. ## Does my supervisor’s rule beat the style guide? Your institution’s handbook is the document your work is marked against, so follow it where it is specific. Style guides fill the gaps the handbook leaves, which is most of the mechanical detail. If the two disagree on something that matters, ask your supervisor in writing and keep the reply. ## Can I cite the same source in two different chapters without repeating myself? Yes. Each chapter is read independently, so a source used in both needs a full in-text citation in each, and one entry in the reference list. The year-omission shortcut for repeated narrative citations applies within a paragraph, not across a document. ## Check your paragraphs against your papers Citation density is a symptom. Paragraphs that are organised around claims, with each claim tied to the papers that support it, come out correctly cited almost by accident, and paragraphs that march through one study at a time never do, however many brackets you add. If you have your papers and a paragraph you have written, paste it into Litrevu: it shows which claims your papers back and opens the passage behind each one, so you can see where a citation is missing. Try it free, no credit card required. Check your writing against your papers ## Related Guides - How to Synthesize Sources in a Literature Review (Step-by-Step, With Examples) - How to Cite a Source Cited in Another Source (APA, Harvard, MLA and Chicago, 2026) - How to Paraphrase Sources in Academic Writing (Without Plagiarizing) - 10 Common Literature Review Mistakes (and How to Avoid Them) --- # Best AI Tool for a Systematic Review in 2026: What Each One Actually Does URL: https://litrevu.com/blog/best-ai-tool-for-systematic-review Category: AI & Research Writing Published: 2026-09-14 Summary: No single AI tool runs a whole systematic review. What Elicit, Rayyan, Covidence, Consensus, Scite and Litrevu each do at each stage, matched to searching, screening, extraction and writing, with 2026 prices read off each vendor's own page. AI & Research Writing ## Best AI Tool for a Systematic Review in 2026: What Each One Actually Does By Wasim Ghoor · 14 September 2026 · 11 min read · Updated 16 September 2026 There is no single best AI tool for a systematic review, because a systematic review is four separate jobs: searching, screening, data extraction, and writing the synthesis. No tool does all four well. Rayyan and Covidence are built for screening. Elicit is the strongest of the AI research assistants at searching and extraction. Litrevu helps you read, compare and check the studies you have already included. Pick by stage, not by brand, and expect to use two or three tools rather than one. ## What counts as a systematic review, and why does that change which tool you need? A systematic review answers one question that was specified in advance, by searching for every study that meets eligibility criteria set before screening starts, screening all records against those criteria, and reporting the whole process in enough detail that another team could repeat it. That last clause is what separates it from an ordinary literature review, and it is why tool choice matters more here than anywhere else in academic writing. The reporting standard most journals expect is PRISMA 2020, published by Page and colleagues in the BMJ in 2021 . The PRISMA 2020 checklist "includes seven sections with 27 items, some of which include sub-items", covering the search, the selection process, the data collection, the risk of bias assessment and the synthesis. A tool that speeds up one of those 27 items has helped with roughly 4% of the reporting burden, which is worth having and is not the same as doing the review. The conduct standard, if you are following Cochrane, is stricter. Cochrane’s MECIR standard C39 is marked Mandatory and reads: "Use (at least) two people working independently to determine whether each study meets the eligibility criteria, and define in advance the process for resolving disagreements." Two people. That single sentence rules out any tool as a complete answer, and it is the fact most tool comparisons leave out. ## Which AI tool should I use for each stage of a systematic review? Match the tool to the stage. Screening tools handle volume and disagreement between reviewers, research assistants handle discovery and extraction, and tools that work from your included PDFs help with the written synthesis at the end. Prices in this table are as of September 2026 and were read off each product’s own pricing page, linked in the first column. Vendors reprice without notice, so treat every figure below as a pointer to the page rather than a promise. Tool Strongest at Does not do Price Rayyan Title and abstract screening with multiple reviewers, duplicate detection, AI relevance predictions Database searching, writing the synthesis Free forever plan: 3 active reviews, 2 invited reviewers. Essential $4.99 per seat per month billed annually. Advanced $8.33 per seat per month billed annually Covidence Screening, full text review, data extraction and risk of bias for a team, with a PRISMA flow count Finding the papers, writing the synthesis Trial with 500 records. Single $339 USD per year for one review. Package $907 USD per year for up to 3 reviews Elicit Finding papers across a large corpus and extracting structured data into a table you can edit Acting as a second independent screener, writing a submission ready prose synthesis Basic plan free. Pro $49 per month, or $588 billed annually. Scale $169 per month Consensus A fast evidence summary for a single question, useful for scoping before you write the protocol Managing a screening workflow, extraction at review scale Subscription, with a free tier and paid monthly and annual plans. Figures moved during 2026, so read the current numbers on the pricing page Scite Citation context, whether a later paper supports or contrasts a claim, useful when appraising included studies Screening, extraction, drafting Free tier: 25 MCP credits per month, no Assistant or Search. Basic $20 per month billed yearly. Pro $50 per month billed yearly. 7 day free trial Research Rabbit Mapping a citation network visually to find adjacent work your search string missed Screening, extraction, drafting Free to sign up Litrevu Reading and comparing the studies you have already included, with answers that cite the passage they came from, and checking your own synthesis against them Searching databases, deduplicating, screening, PRISMA flow counts, second reviewer duties, extraction at scale Free plan, no credit card. Starter $8.49 for 7 days and up to 500 sources. Scholar $29 for 3 months and up to 500 sources. Platinum $69 for 12 months and unlimited sources . All paid tiers are one time purchases, not subscriptions Two of those rows are the ones postgraduate students skip and then regret. Rayyan’s free plan covers three active reviews, which is more than most Masters students will run at once. Covidence’s pricing is built for funded teams, so a solo student paying $339 USD out of pocket for one review should look hard at whether Rayyan’s free tier does the same job. ## Can an AI tool screen my abstracts instead of a second human? Not in a review that follows Cochrane’s standards. MECIR standard C39 is Mandatory and requires "(at least) two people working independently" on eligibility decisions, and a language model is not a person under that standard. You can run an AI screener alongside two humans as a check, and some teams do, but it does not fill one of the two seats. The performance data supports the caution rather than contradicting it. Kim and colleagues, writing in the Journal of Medical Artificial Intelligence in 2025 , identified "a total of 15 LLM-based model performances" for title and abstract screening and reported a pooled area under the curve of 0.922 with sensitivity of 0.812 and a 95% confidence interval running from 0.617 to 0.920. Worth noting the authors’ own caveat: the pooled summary "does not reflect all models that are reported in literature due to a lack of information to discern the confusion matrix", so the pool is a subset of the 15. At the point estimate, roughly one relevant record in five is missed. At the lower bound of that interval, nearly four in ten are missed. In a review where one missed trial can flip the direction of a pooled effect, that is a real cost, and it is why our guide to screening 500 abstracts treats AI relevance ranking as an ordering tool rather than a decision tool. ## Is Elicit good enough for a systematic review on its own? Elicit is the strongest of the AI research assistants for finding and extracting, and Elicit’s own documentation is clear about what it does: "Elicit screens every gathered paper against your criteria. A paper that fails any one of them is excluded, and every decision shows the quote from the paper behind it." Showing the quote behind each decision is a good design choice, because it makes an exclusion auditable. The limits sit in that same documentation, and they matter for a systematic review specifically. Elicit’s Pro plan screens up to 5,000 gathered papers, Scale goes to 20,000 and Enterprise to 40,000, and the final report is built from "the 80 papers with the highest screening scores by default", which Pro can extend to 135 and Scale or Enterprise to 200. A report drawn from the highest scoring papers is a useful research output and it is not a synthesis of every included study, which is what a systematic review has to be. Elicit also states on its own pages that it can save a large share of the time usually spent on a systematic review, and lists PRISMA grade screening and extraction accuracy as an Enterprise feature. Those are the vendor’s claims on the vendor’s site, which is exactly how to weigh them when writing a methods section. One more distinction worth being pedantic about, because it is the element people get wrong: Elicit does accept your own uploaded PDFs, so uploading is not what separates these tools. What differs is the output format, which is reports, tables and structured comparisons rather than prose. ## What is the cheapest way to run a systematic review with AI in 2026? A solo postgraduate student can assemble a working stack for nothing, as of September 2026. Rayyan gives a free forever plan with 3 active reviews and 2 invited reviewers, which covers screening and the second reviewer workflow. Research Rabbit is free to sign up and covers citation chaining. Consensus has a free tier for scoping the question. Scite gives 25 MCP credits a month on its free tier, though Assistant and Search are not included at that level. Litrevu’s free plan gives 25 messages and 2 drafted sections every 30 days with no credit card, which is enough to ask your included studies a few questions and see the passages behind the answers. The first thing worth paying for is usually screening capacity, not a reading assistant. If a review is larger than Rayyan’s free tier comfortably handles, or a team needs risk of bias tooling, Covidence at $339 USD per year for a single review is the standard next step. If the constraint is working through the included studies rather than screening them, the economics run the other way, because Litrevu’s paid tiers are one time purchases rather than monthly subscriptions: Starter is $8.49 for 7 days , Scholar is $29 for 3 months with up to 500 sources. A student who needs the tool for six weeks pays once rather than six times. Set your inclusion and exclusion criteria and your search strategy before paying for anything. Tools are cheap compared with the cost of screening 2,000 records against criteria that had to be revised halfway through. ## Do I have to declare that I used AI in my systematic review? Yes, and the expectation is now formal. On 11 November 2025, Cochrane, the Campbell Collaboration, JBI and the Collaboration for Environmental Evidence published a joint position statement on AI use in evidence synthesis that calls for "human oversight, transparency, and justification when AI is used in evidence synthesis". The statement sits on top of the RAISE recommendations , short for Responsible AI in Evidence Synthesis, released as three guidance papers in June 2025: one on collaboration across roles, one for developers building and evaluating AI tools, and one for users selecting and implementing them. In practice that means three elements in a student’s methods section: name the tool and version, say which stage it was used for, and say who checked the output. Cochrane’s own stated goal is that AI enhances rather than replaces human judgement in the review process, and that authors are accountable for the final content. Institutional rules sit on top of that and differ by university and by country, so read your own institution’s research integrity policy alongside the target journal’s. ## Where does Litrevu fit in a systematic review? Litrevu helps only after screening is finished and the included studies are settled. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. It does not search databases, does not deduplicate records, does not screen against eligibility criteria, does not produce a PRISMA flow count , and does not act as a second reviewer under Cochrane MECIR standard C39. What that leaves is the part most students find slowest: working out what a folder of included PDFs says as a body of evidence. You add the papers you have included, ask where they agree and disagree, compare their designs, samples and findings in a cited table, and paste a paragraph of your synthesis to see which claims the papers back. Each answer carries the citation for the passage it came from, so you can check it against the page. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy, write the synthesis yourself and declare how you used it. Whether any of this is worth having depends on where your bottleneck sits. If the bottleneck is screening, a screening tool will help more. Here is the shape of a cited answer about your included studies. This is a format illustration, not a real Litrevu result, and the bracketed tokens are placeholders rather than findings: Where do the included studies disagree on [outcome]? Several of the included studies report [finding] (Author, Year; Author, Year). [Author, Year] reached a different conclusion, which the authors attribute to [stated reason]. In the passages retrieved, none of the included studies addresses [gap] directly. Source trace: (Author, Year), p. [page], from [filename].pdf The point of the trace line is that you can open the PDF you uploaded and check the page. That check is your job, not the tool’s, and in a systematic review it is not optional. ## Frequently asked questions ## Can I just use ChatGPT to do my systematic review? No. A general chatbot has no eligibility screening workflow, no duplicate detection, no audit trail of inclusion decisions, and no reliable link between a claim and the paper it came from. Cochrane’s MECIR standard C39 requires at least two people working independently on eligibility decisions, which a chatbot cannot satisfy. Use purpose built tools for screening and keep the human decisions human. ## Is Elicit or Rayyan better for screening abstracts? Rayyan is better for screening as a workflow, because it is built around multiple reviewers, duplicate detection and conflict resolution, and its free forever plan covers 3 active reviews with 2 invited reviewers. Elicit is better at finding papers and extracting structured data from them, and its Pro plan screens up to 5,000 gathered papers against criteria you set. Many teams use Elicit to find and extract, and Rayyan to screen. ## Do I need Covidence if I am a solo Masters student? Usually not. Covidence is priced for funded teams at $339 USD per year for a single review as of September 2026, and its strengths are team screening, risk of bias tooling and full text management at scale. A solo student running one review will typically get what they need from Rayyan’s free forever plan, which allows 3 active reviews. Consider Covidence when your department already holds a licence or when your supervisor requires it. ## Will my university reject a systematic review that used AI? Almost certainly not if you declare it properly, though the rule differs by institution and by country. The joint position statement published by Cochrane, the Campbell Collaboration, JBI and the Collaboration for Environmental Evidence on 11 November 2025 calls for human oversight, transparency and justification rather than prohibition. Name the tool, name the stage it was used for, and name who verified the output in your methods section, then check your own institution’s research integrity policy for anything stricter. ## Does an AI screener count as my second reviewer? No. Cochrane’s MECIR standard C39 is Mandatory and requires "(at least) two people working independently" to decide whether each study meets the eligibility criteria. An AI screener can run alongside two human screeners as an extra check, or as a way to order records by likely relevance, but it does not fill one of the two required seats. Pooled sensitivity for language model screening was reported at 0.812 in a 2025 meta-analysis in the Journal of Medical Artificial Intelligence, with a confidence interval reaching down to 0.617. ## Can Litrevu run a systematic review for me? No, and Litrevu does not claim to. Litrevu helps you read, compare and check the papers you have already searched for, screened and included, with each citation opening to the passage in the PDF you uploaded. The search, the screening, the eligibility decisions, the PRISMA flow count, the synthesis you write and the verification of every citation remain yours. ## Ask your included studies If your screening is done and your included studies are sitting in a folder, the slow part is ahead of you: understanding them well enough to write a synthesis where every sentence is anchored to a study you actually read. Add the PDFs you have included, ask where they agree and where they disagree, compare their methods and findings side by side, and check your own synthesis against them. Each answer opens to the passage it came from, so you can read it before you rely on it. Free to start, no credit card required. Try Litrevu free ## Related Guides - Literature Review vs Systematic Review: What’s the Difference? - How to Screen 500 Abstracts Without Reading Every One (2026) - Scoping vs Systematic vs Narrative Review: Which Do You Need? - The Best AI Tools for a Literature Review in 2026 (Honest Comparison) --- # How to Cut a Literature Review Down to the Word Limit (2026) URL: https://litrevu.com/blog/how-to-cut-a-literature-review-to-the-word-limit Category: Literature Review Published: 2026-09-10 Summary: Over your dissertation word limit? What counts towards it, how much leeway you get and what to cut first in a literature review, with named university rules from Manchester, Cambridge, ANU and SOAS. Literature Review ## How to Cut a Literature Review Down to the Word Limit (2026) By Jessica McLaren · 10 September 2026 · 9 min read · Updated 15 September 2026 Cut a literature review in this order: check what your institution actually counts, delete the paragraphs that describe a study without using it, then compress the description that survives into synthesis. Step one comes first because it often changes the arithmetic. At the University of Manchester’s Global Development Institute, the dissertation count is "12,000 to 15,000 words (plus or minus 10%)" and it includes "chapter footnotes and endnotes" while excluding "references, interview transcripts and abstracts" ( GDI dissertation handbook, 2023/24 ). A student on that programme who trims the bibliography saves nothing, and one who hides a sentence in a footnote saves nothing either. ## What does a dissertation word limit actually count? A word limit is the maximum number of words an institution will accept in the assessed body of the work, and each institution defines that body differently. Footnotes, quotations, tables and appendices are sometimes inside the count and sometimes outside it, which is why two students with identical drafts can be over by different amounts. Here is what four published sets of rules say, as of September 2026. Every row links to the document the figures come from. Document Counted inside the limit Outside the limit What happens if you go over Manchester , Global Development Institute dissertation handbook (2023/24) "Chapter footnotes and endnotes" "References, interview transcripts and abstracts"; no more than five pages of appendices 12,000 to 15,000 words plus or minus 10%, with hard stops at 10,800 and 16,500 words, outside which the dissertation "will not be marked" Cambridge , History and Philosophy of Science PhD thesis guide Footnotes: "including footnotes but excluding the bibliography" The bibliography; appendices only with Degree Committee permission No more than 80,000 words, and exceeding it needs Degree Committee permission. No minimum length is set ANU , College of Arts and Social Sciences word limits The body of the assessment item "Bibliographies, footnotes and endnotes", plus appendices in the declared length "No penalty will be applied for the initial 10% excess words. Thereafter a 10% penalty will apply" SOAS , word count and over-length coursework policy (2018/19) "Quotations, footnotes, titles, abstracts, summaries and tables of contents" Not listed: the policy defines the count by what it includes 5 percentage points deducted for up to 10% over, rising to a mark of zero beyond 30% over The practical reading of that table is that the same edit has different value at different institutions. Moving 400 words into footnotes clears 400 words at ANU and clears nothing at Cambridge HPS, Manchester or SOAS. Check your own programme handbook before you start cutting, because a faculty rule usually overrides the university-wide one. ## How far over the word limit can I go before it costs marks? Tolerance is institution-specific and it is usually written down, so the answer is in your handbook rather than in convention. Three published positions, as of September 2026: the ANU College of Arts and Social Sciences applies "no penalty ... for the initial 10% excess words" and then a 10% penalty; SOAS deducts 5 percentage points for up to 10% over, rising to a mark of zero beyond 30% over ( 2018/19 policy document ); the Manchester GDI handbook sets hard stops at 10,800 and 16,500 words, outside which a dissertation "will not be marked". One detail catches people out. UCL’s Institute of Education explains that a single figure such as "2000 words" carries "plus or minus 10% leeway", but a stated range such as 1500 to 2000 words has "no 10% extra leeway" ( UCL IOE, understanding assessment requirements ). A limit written as a range is already the tolerance. For a PhD thesis the consequence is procedural rather than a deducted mark. Cambridge requires a statement of length on submission, and warns that unless permission to exceed the limit was obtained beforehand, a thesis over the limit "may not be examined until its length complies with the prescribed limit" ( Cambridge word limits ). ## What should I cut first when a literature review is over the limit? Cut in this order: paragraphs that describe a study without using it, then repeated descriptions of method that are not the point of your own study, then quotations that could be paraphrased, then the background section that repeats your introduction. What you do not cut first is the number of sources, because at most institutions the reference list sits outside the count anyway. What each kind of cut is worth depends on the rules in the table above, which is why the order matters. The edit What it saves against a counted total What it costs you Delete a paragraph that describes a study without using it The whole paragraph, at every institution in the table Nothing, if the source still appears where it does carry a claim Compress three description paragraphs into one synthesis paragraph Two paragraphs of restatement, at every institution in the table No citations: all three sources survive inside the one paragraph Paraphrase a long block quotation The difference in length. SOAS counts quotations, and none of the four documents here excludes them The author’s exact wording, so keep the quotation where the wording is the point Move text into footnotes Nothing at Manchester, Cambridge HPS or SOAS. The full amount at ANU Readability, and at three of the four institutions you gain nothing for it Move text into an appendix Capped or permission-gated: five pages at Manchester, Degree Committee approval at Cambridge HPS The argument, if the evidence for a claim now sits in a second document Cut sources from the reference list Nothing at Manchester, Cambridge HPS or ANU, where the bibliography sits outside the count Coverage, which is the thing being marked. This is the wrong first move The first pass that reliably finds words is a claim audit. Go through the chapter and mark every paragraph with the claim it supports in your argument. Any paragraph you cannot label is a paragraph describing a study for its own sake. A chapter written study by study spends a paragraph on each source, while a chapter written claim by claim spends a paragraph on each idea and cites three or four sources inside it, so the same reading arrives in fewer words. That is the arithmetic behind a theme-based structure . ## Can I move words into footnotes or an appendix to get under the limit? Usually not, and the rules say so in writing. Footnotes are counted at Cambridge HPS ("including footnotes but excluding the bibliography"), counted in the Manchester GDI handbook as "chapter footnotes and endnotes", and counted at SOAS, whose policy defines word count as including "quotations, footnotes, titles, abstracts, summaries and tables of contents". The ANU College of Arts and Social Sciences is the exception among those four, excluding "bibliographies, footnotes and endnotes" from the count. Appendices are excluded more often, but they are fenced. The Manchester GDI handbook permits "no more than five pages of appendices". Cambridge HPS requires Degree Committee permission to place material in appendices outside the word limit. ANU asks students to declare the length "without appendices, bibliography and footnotes on the final page of their assessment item", which means the appendix is visible to the marker as a separate object rather than a hiding place. There is a further reason to be careful. An examiner reading a literature review chapter with its evidence in an appendix has to hold two documents in mind to follow one argument, and the synthesis is what is being assessed. Shifting words rarely reads as well as removing them. ## How do I compress three description paragraphs into one synthesis paragraph? Write the claim first, then attach the sources to it, rather than writing one paragraph per source and hoping the claim emerges. Three paragraphs that each summarise a study become one sentence that states what the three agree on, one that states where they diverge, and one that says what the divergence means for your research question. That is the move that gets a long review under a limit without losing evidence, because the citations all survive and only the restatement goes. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Ask it where three of your papers agree and where they diverge, and you get the agreements and the disagreement side by side, each with the passage behind it: the raw material for the claim-first paragraph you want when you are trying to say more in fewer words, which you then write yourself. The following is a format illustration, not a real output. The bracketed slots are where your own papers and findings go, and the citation tokens stand in for your real references. Paper by paper, the shape that runs long: (Author, Year) investigated [topic] using [method] and found [finding]. (Author, Year) also investigated [topic], using [method], and reported [finding]. (Author, Year) examined [related topic] with [method] and concluded [finding]. Claim first, the shape a word limit rewards: [Claim about the state of the evidence] is supported by (Author, Year) and (Author, Year), both using [method]. (Author, Year) reaches a different conclusion on [specific dimension], which matters here because [link to your research question]. The second shape carries the same three citations in one paragraph instead of three, and it tells the examiner what you think rather than what you read. For the longer version of this technique, including how to handle a study that sits awkwardly across two themes, see how to synthesise sources in a literature review . ## How much of the whole document should the literature review be? For a research proposal, a Unisa guide for staff and students puts the literature review at "about 1/3 to 1/2 of the narrative" and caps the master’s proposal itself at no more than 20 pages, with doctoral proposals running "up to a maximum of 35 pages", a figure the guide says includes the references and figures ( Unisa College of Agriculture and Environmental Sciences, proposal writing guide, Prof Jana Olivier, 2019 ). A proposal literature review that has grown past half the document is over-long by its own programme’s guidance, whatever the total says. For a dissertation or thesis chapter the proportion is set locally and often not at all. Stellenbosch University’s postgraduate layout guidance, revised February 2022, sets no overall thesis word limit and specifies only that the English and Afrikaans abstracts each run "not more than 500 words" ( Stellenbosch formatting and layout guidelines ). Where the university sets no figure, the faculty or the supervisor does, and that number is the one that binds you. Two related guides on this blog carry the length question itself: how long a literature review should be by level, and how to write a literature review for a research proposal , where the proportion question bites hardest. ## How do I know when I have cut too much? Three tests, and a chapter that passes all three is short rather than thin. Every claim still carries at least one citation. Every theme still shows at least one study that disagrees, because a review where all the evidence points one way usually means the dissenting work was cut rather than that no dissent exists. Every source in the reference list is still cited in the body, since an uncited reference left behind by heavy editing is a marking problem of its own. Worth knowing before you panic about being under: a minimum is not always set. Cambridge’s HPS PhD guidance states no minimum length for the thesis, while the Manchester GDI handbook fixes a hard floor of 10,800 words and will not mark a dissertation below it. Where no minimum is published, "too short" is a coverage judgement rather than a word count, and the thing being judged is whether a major strand of the literature went missing. If a cut leaves a theme with one supporting study and no contrast, the honest repair is to restore the contrast and remove a descriptive paragraph somewhere else, not to leave the theme looking unanimous. Losing the disagreement is the expensive kind of cut, and it sits alongside the other faults in 10 common literature review mistakes . Distance students working without a campus writing centre can also check the structure question against the Unisa dissertation literature review guide , and the chapter-by-chapter allocation question against research paper structure . ## Common questions about cutting a literature review ## Does the reference list count towards my word limit? At most institutions it does not. The Manchester GDI handbook excludes "references, interview transcripts and abstracts" from the dissertation count, Cambridge HPS excludes the bibliography, and the ANU College of Arts and Social Sciences excludes bibliographies. Check your own handbook, because exclusion is common rather than universal, and cutting sources to save words is usually the wrong first move. ## Can I go 10% over my dissertation word limit? Only if your institution says so in writing. The ANU College of Arts and Social Sciences applies no penalty for the first 10% of excess words and a 10% penalty after that, while SOAS deducts 5 percentage points for up to 10% over. UCL’s Institute of Education adds that a limit written as a range, such as 1500 to 2000 words, carries no extra leeway at all. ## Do quotations count towards the word limit? Usually yes. The SOAS policy defines the count as including "quotations, footnotes, titles, abstracts, summaries and tables of contents", and none of the four documents compared in this guide excludes quotations. Paraphrasing a long block quotation is therefore one of the few edits that reliably reduces a counted total. ## What is the fastest way to find 1,000 words to cut in a literature review chapter? Label every paragraph with the claim it supports, then delete the paragraphs you cannot label. Those are the paragraphs describing a study rather than using it, and they tend to sit in the background section, which most people draft before the argument has settled. A claim audit finds whole paragraphs, which is why it beats a line-by-line tidy-up when you need to lose a thousand words. ## Will my marker notice that I moved text into an appendix? Often, because the rules are built to make it visible. The ANU College of Arts and Social Sciences asks for a declared length excluding appendices, bibliography and footnotes on the final page, the Manchester GDI handbook allows no more than five pages of appendices, and Cambridge HPS requires Degree Committee permission for appendix material outside the word limit. ## Is there a minimum length for a literature review? Some programmes set one and others do not. The Manchester GDI handbook will not mark a dissertation below 10,800 words, while Cambridge’s HPS PhD guidance states no minimum length at all. Where no minimum is published, the binding constraint is coverage: a review that omits a major strand of the literature is short in the way that costs marks. ## Find what your papers agree on Cutting is easier when you know what your papers agree on and where they diverge. Ask Litrevu, and each point comes with the passage behind it. Paste a paragraph you wrote and see which claims your papers back, so you know which sentences carry evidence and which only restate it. It is free to start and no credit card is required, as of September 2026. Ask your own papers ## Related Guides - How Long Should a Literature Review Be? (Word Count Guide by Degree) - How to Synthesize Sources in a Literature Review (Step-by-Step, With Examples) - How to Structure a Literature Review by Theme (With Examples) - 10 Common Literature Review Mistakes (and How to Avoid Them) --- # Best Elicit Alternatives for Writing a Literature Review (2026) URL: https://litrevu.com/blog/best-elicit-alternatives-for-literature-review Category: AI & Research Writing Published: 2026-09-07 Summary: The best Elicit alternative depends on your task: finding papers, checking citations, mapping a field, or reading and comparing the papers you already have. Elicit, Consensus, Scite, Research Rabbit and Litrevu matched to the one job each does best, as of September 2026. AI & Research Writing ## Best Elicit Alternatives for Writing a Literature Review (2026) By Samuel de Bruyn · 7 September 2026 · 9 min read I co-founded one of the tools in this comparison, so read the section on my own product with that in mind. I have tried to be straight about where Elicit, Consensus, Scite and Research Rabbit each beat us, because a comparison that only flatters the writer’s own tool is useless to you and, frankly, easy to spot. The best Elicit alternative depends on which part of the literature review you are stuck on. For finding and screening papers across a huge corpus, Elicit is hard to beat and most alternatives are a sideways move. For working through a set of papers you have already chosen, understanding what each says, comparing them and checking your own claims against them, you may want a different shape of tool. That second job is where most postgraduate students actually get stuck, and it is where the honest answer stops being "Elicit" and starts being "it depends." ## What counts as an "Elicit alternative" anyway? An Elicit alternative is any AI research assistant that does one or more of Elicit’s core jobs: searching academic literature, extracting data from papers, screening abstracts, or summarising findings, using a language model on top of a scholarly database rather than the open web. Elicit itself runs on a large academic corpus of well over a hundred million papers, so a real alternative has to be grounded in actual academic sources, not a general chatbot guessing from memory. That grounding is the line between a research tool and a plausible-sounding fabrication engine. The category matters because the tools are not interchangeable. Two apps can both call themselves "AI for research" and be built for completely different steps of the same project. ## What is Elicit best at, and when should I look for an alternative? Elicit is strongest at finding and screening papers across a large corpus: you ask a research question, and it returns relevant papers with an extracted summary of each in a table you can filter. You should look for an alternative when your task is not "find and screen papers" but something else, such as checking whether a citation supports a claim, mapping how a field connects, or working through papers you already have. Elicit added a dedicated Systematic Review workflow that runs screening and data extraction at scale, documented on its own site, so if bulk screening is your bottleneck the alternative you need might just be Elicit’s other feature. Here is the practical test I give students. Write down the single sentence that describes what you are trying to produce this week. If that sentence is "I need to find the papers," Elicit or Consensus. If it is "I have the papers and I need to understand what they say," you want a tool built around your own library. Picking software before you can finish that sentence is how people end up paying for three subscriptions and still staring at a blank document. ## Which Elicit alternative is best for each research task? The best alternative maps to the specific job, and the five tools below split cleanly by what they are built to do. This table pairs each tool with the one task it does better than the others, as of September 2026. Prices change often, so the free column says whether a no-cost option exists rather than quoting a figure, and each tool’s own pricing page is the place to confirm the current number. Elicit, Consensus, Scite, Research Rabbit and Litrevu paired with the one task each does best, and whether a free option exists, as of September 2026. Tool The one task it does best Free option (as of September 2026) Elicit Finding and screening papers at volume, and extracting the same fields from every paper into a table Free plan, with paid monthly tiers above it Consensus A fast evidence summary for one specific, well framed question Free plan alongside its paid subscription Scite Showing whether later papers support or contrast a claim, from its classified citation statements Publishes its own plans; check its pricing page Research Rabbit Mapping the citation network around papers you already trust, to surface adjacent work Publishes its own plans; check its pricing page Litrevu Reading, comparing and checking the papers you have already gathered, with each answer citing the passage it came from Free plan, no credit card Read the table by your task, not by the brand. Nobody needs all five, and most postgraduate projects use two: one tool to find the papers and one to help you read and check them. ## What is the best AI tool for finding and screening hundreds of papers? For finding and screening papers at volume, Elicit is the strongest option, and Consensus is the better pick when you have one specific question rather than a whole review to build. Elicit returns papers in a table and can extract the same fields from every paper at once, which is what makes screening dozens or hundreds of abstracts tolerable, and its Systematic Review feature is built for exactly that scale. Consensus is narrower on purpose: you ask a single question like "does spaced repetition improve long term retention," and it summarises what the body of evidence says, which is useful for scoping before you commit to a full review. Research Rabbit solves a different half of "finding." Instead of a keyword search, it takes a few papers you already trust and maps their citation network so you can see adjacent work you would never have found by searching terms. That is genuinely something Elicit does not do as well, so if your problem is "I keep missing relevant papers," Research Rabbit is the honest recommendation, not Litrevu. ## What is the best AI tool for working through papers I already have? For working through papers you have already gathered, you want a tool built around your own library rather than search, and that is the gap Litrevu fills. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. You add your own PDFs and ask what they say: where they agree, where they disagree, how their methods differ, with each claim in the answer tied to the passage it came from. This is a different shape of tool from Elicit’s search because search tools optimise for recall, finding everything, while a reading assistant optimises for depth, saying something precise about a fixed set. Litrevu is not a discovery engine: its only search is an open-access lookup (OpenAlex) when you add sources, where you pick which papers to add, and it cites only the papers in your library, not the web. The positioning is integrity first: Litrevu helps you read and check, and the writing stays yours. It can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Here is the shape of what Litrevu returns. Below is a format illustration, not a real output and not a real study: say a student uploads five papers on teacher burnout and asks how each one measured it, with the author and year of each paper left as tokens. Across the five uploaded studies, burnout was measured almost entirely with one standard inventory, though the versions differ. Three studies used the educators’ form of the instrument (Author, Year, p. 4; Author, Year, p. 7; Author, Year, p. 2), while one substituted a shortened scale to cut survey fatigue (Author, Year, p. 11). Only one study triangulated the inventory with interviews (Author, Year, p. 5), which that author argues is why the quantitative studies may understate emotional exhaustion. Sources: uploaded_paper_1.pdf p.4, uploaded_paper_2.pdf p.7, uploaded_paper_3.pdf p.2, uploaded_paper_4.pdf p.11, uploaded_paper_5.pdf p.5 Each citation there opens the passage it came from in a file the student uploaded, with the page where the PDF has one, so verification is a matter of opening the citation and reading the line. You can ask the same kind of question of your own PDFs in Litrevu. ## Which of these tools cite real sources, and how do I avoid fake AI citations? The tools in this comparison cite real sources because each is tied to an actual corpus or to your own uploads, which is exactly what a general chatbot is not. This matters more in 2026 than it did two years ago. A wave of reporting this year, including coverage in Nature and a study covered by STAT , documented a sharp rise in fabricated or "hallucinated" citations appearing in academic papers, references that look real but point to work that was never written. Nature reported that hallucinated citations were turning up most often in social science preprints, which is directly relevant to the postgraduate students most of this blog is written for. The defence is not to avoid AI, it is to use tools where every citation is checkable. Elicit and Consensus ground their answers in indexed papers, Scite exists specifically to show the context a citation was used in, and Litrevu ties each citation to a passage in a file you uploaded. A general assistant like ChatGPT, asked to "write my literature review," has no such anchor and will invent references that pass a glance and fail a library search. Whichever tool you choose, the rule is the same: open the source and confirm the claim before it goes in your document. If you want the mechanics of citing AI itself, our guide on how to cite ChatGPT and AI sources covers the APA, MLA and Harvard formats, and can AI write a literature review covers where the line sits between help and misconduct. ## Is there a free Elicit alternative for postgraduate students? Yes, several tools offer a genuine free option, though "free" means something different in each, as of September 2026. Consensus offers a free plan alongside its paid subscription, Elicit runs a free plan with paid monthly tiers above it, so heavy screening tends to land on the paid tiers, and Litrevu’s free plan gives you 25 messages and 2 drafted sections every 30 days , with no credit card. Scite and Research Rabbit publish their own plans, and whether a free or institutional route applies to you is worth checking on their pricing pages before you decide. If budget is the deciding factor, the honest move is to match the free tier to the stage you are at rather than picking the cheapest tool overall. A student in the finding stage gets more out of the free plans on the search side, while a student who has already gathered a stack of PDFs and needs to make sense of them gets more out of Litrevu’s free plan. Country pricing also varies between vendors, which is worth checking if you are studying in South Africa, Kenya or elsewhere on the continent. Whatever you choose, avoid stacking three paid subscriptions for one review. Most projects need one search tool and one tool for reading and checking, and at least one of those can usually be the free tier. ## Frequently asked questions ## Is Elicit or Consensus better for a literature review? Elicit is better when you are building a whole review and need to find and screen many papers, because it returns results in a filterable table and extracts the same fields across every paper. Consensus is better when you have one specific question and want a fast summary of what the evidence says. For a full review most people start with Elicit; for a quick evidence check Consensus is faster. ## What is the best free AI tool for a literature review? There is no single best free tool, because the free tiers suit different stages, as of September 2026. Elicit and Consensus both publish a free plan on the search side, and Litrevu has a free plan, with no credit card, for working through papers you already have. Match the free tier to the step you are stuck on. ## Can any of these tools write my literature review for me? No, and you should not want one that claims to. These tools help you find, read and check sources, but the review is your argument and your responsibility, and every claim still needs you to open the source and confirm it. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution’s policy, write your own text, and declare how you used AI. ## Do these AI tools use real citations or made up ones? The tools in this comparison are tied to real corpora or to your own uploaded files, so their citations are checkable, unlike a general chatbot that can invent references. In 2026, Nature and other outlets reported a rise in fabricated citations from open ended AI use, which is why grounding matters. Whatever tool you use, open the cited source and confirm it before it enters your document. ## Which AI research tool is best for South African and other African postgraduates? The same task based logic applies anywhere, so choose by the stage you are stuck on rather than by region. That said, cost and country pricing matter more for many African students, so check each vendor’s pricing page for free tiers and any regional pricing, and note that Litrevu was built in South Africa with a free tier aimed at postgraduate budgets. ## Do I need to disclose that I used an AI tool in my review? Increasingly, yes, and the specifics depend on your institution’s policy, which you should read before you submit. Many universities updated their generative AI rules through 2025 and 2026 to require students to declare which tools they used and how. Our guide on how to write an AI-use disclosure statement walks through what a compliant declaration looks like. ## Ask Your Own Papers If you have already gathered your papers and the wall you are hitting is making sense of them, what each one says, where they disagree and whether your claims stand up, that is the specific job Litrevu is built for. Litrevu reads every paper you add and answers your questions with a citation to the exact passage behind each claim. It is free to start, no credit card required. Add your PDFs and ask them the question you most need answered this week. Ask your own papers ## Related Guides - Can AI Write a Literature Review? What You Need to Know (2026) - How to Find Academic Sources for Your Research Paper (2026 Guide) - How to Cite ChatGPT and AI Sources (APA, MLA, and Harvard, 2026 Guide) - 10 Common Literature Review Mistakes (And How to Avoid Them) --- # Which AI Tools Cite Real Sources for a Literature Review? (2026) URL: https://litrevu.com/blog/ai-that-cites-real-sources-literature-review Category: AI & Research Writing Published: 2026-09-04 Summary: Which AI tools cite real sources for a literature review, and which invent them? An honest 2026 look at Elicit, Consensus, Scite, Research Rabbit and Litrevu, plus a three-step check for any citation. AI & Research Writing ## Which AI Tools Cite Real Sources for a Literature Review? (2026) By Samuel de Bruyn · 4 September 2026 · 8 min read · Updated 8 September 2026 I am one of the co-founders of Litrevu, so treat this as an interested but honest take. I have tried to say plainly where other tools beat ours, because for this particular question, "does it cite real sources", the honest answer is that several tools do it well and the one you pick depends on the job. If you want an AI tool that cites real, checkable sources in a literature review, use a purpose-built research tool that pulls from an actual paper database or from PDFs you upload, not a general chatbot. Tools like Elicit, Consensus, Scite, Research Rabbit and Litrevu ground what they say in real papers, so each citation points to something you can open and read. A general assistant like ChatGPT or Gemini writes fluent text first and treats the reference list as more text to generate, which is how confident, well formatted, completely fake citations end up in a draft. ## What does it mean for an AI to "cite a real source"? A real citation is one that resolves to a document that actually exists and actually says what the sentence claims. Two things have to be true: the paper is real, and it supports the point it is attached to. An AI cites a real source when its output is tied back to a specific document it retrieved, rather than to a plausible sounding reference it composed from patterns in its training data. The useful distinction is between retrieval and generation. A retrieval based tool looks up real papers, whether from a large index or from the files you hand it, and builds its answer on top of those. A purely generative model predicts the next likely words, and a citation is just more likely words, so it can produce an author, a journal, a year and a DOI that all look correct and none of which lead anywhere. That is the failure mode you are trying to avoid. ## Why do general chatbots like ChatGPT invent citations? General chatbots invent citations because they generate references the same way they generate prose: by predicting plausible text, not by looking anything up. A 2023 study in Nature’s Scientific Reports , titled "Fabrication and errors in the bibliographic citations generated by ChatGPT", documented that a large share of the references ChatGPT produced were either fabricated outright or contained errors in the real details. The references read perfectly. They just did not check out. This is not only an academic worry. In 2023 a United States federal court sanctioned two lawyers after they filed a brief citing judicial decisions that ChatGPT had invented, in the case now widely known as Mata v. Avianca. The lawyers had asked the model whether the cases were real, and it assured them they were. For a literature review, the lesson is narrow and practical. A general purpose model is excellent at rephrasing, structuring and summarising text you give it, which is a different question from whether it can write a literature review on its own . It is not a reliable place to source citations from memory, because it has no memory of documents, only of language. Sourcing references from a chatbot’s memory is one of the common literature review mistakes that is now easy to make by accident. As of August 2026 this has not been "fixed" at the model level, so the safer pattern is to keep discovery and citation inside a tool that retrieves real papers. ## Which AI tools actually cite real sources for a literature review? The tools that cite real sources are the ones built around a corpus of real papers or around your own uploads. Here is the honest split, because each of these is strongest at a different step of the review, and none of them is best at all of them. Elicit is strongest at finding and screening papers across a very large body of literature, and it accepts PDFs you upload as well; if screening is your bottleneck, pair it with a clear set of inclusion and exclusion criteria . Consensus is strongest at surfacing a fast evidence summary for a single, well framed question. Scite is strongest at citation context, telling you whether other papers support or contrast a given claim, drawn from more than 1.6 billion classified citation statements. Research Rabbit is strongest at mapping a citation network visually so you can discover adjacent work you had missed. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Its job starts later than the others: after you have chosen your papers, when you need to understand what they say, how they compare and whether your own claims stand up. Litrevu is not the tool for discovering papers you do not yet have (its only search is an open-access lookup when you add sources), and it does not screen at the scale Elicit does. One myth worth killing, because I have seen us get it wrong in our own marketing: working from your own uploaded papers is not unique to Litrevu. Elicit reads uploads too. The difference is what happens next, a conversation with your papers in which each citation opens to its passage versus reports, tables and extraction, not the upload itself. ## How do Elicit, Consensus, Scite, Research Rabbit and Litrevu compare? Each of these tools cites real sources. They differ in which part of the literature review they are built for. The table below is about capability, not price, and the last column is deliberately the one where each tool beats Litrevu. Comparison of Litrevu, Elicit, Consensus, Scite and Research Rabbit by what each is best for, what it works from, what it outputs, and where each beats Litrevu. Tool Best for Works from What you get Where it beats Litrevu Litrevu Understanding, comparing and checking the papers you have already chosen PDFs you add, plus open-access papers you pick from an OpenAlex search Answers that cite the passage they came from, side-by-side comparison tables, and a check of your own writing against your papers Only a basic open-access search, no screening at scale, no view on whether a source is contested Elicit Finding papers and extracting structured data from them 138M paper corpus, and PDFs you upload Reports, tables, summaries and structured comparisons Far larger discovery corpus, systematic review screening into the thousands, purpose-built data extraction tables Consensus Answering an empirical yes or no question across the literature 200M+ peer-reviewed papers Synthesised answer with a meter showing how much of the literature agrees Answers questions across all published work in seconds; nothing in Litrevu does this Scite Checking whether a paper has been supported or contradicted since 1.6B+ classified citation statements Citation contexts labelled supporting, contrasting or mentioning Tells you if a source is contested. Litrevu has no view on this at all Research Rabbit Exploring outward from one paper to find related work Citation graph Visual networks of related papers, authors and topics Visual citation-graph discovery; Litrevu offers nothing comparable The honest split: if you do not yet have your papers, Elicit, Consensus and Research Rabbit will get you there faster than Litrevu can. Litrevu's only discovery is an open-access search (OpenAlex) when you add sources, where you pick which papers to add; it cites only the papers in your library and does not search the web for citations. If you want to know whether a study you already cite has since been contradicted, Scite answers that and Litrevu does not. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Elicit also works from uploaded PDFs, so the real difference there is the shape of the work: Elicit produces reports, tables and structured comparisons, with a purpose-built extraction workflow, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Its comparison tables are built in chat for a handful of papers and are not an extraction workflow. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Comparison verified as of August 2026 against each vendor's own documentation. These products change quickly, so check the current feature list before deciding. Read that table as a workflow, not a ranking. Many researchers use two of these: one to find and screen, then another to work through the papers they keep. If your bottleneck is finding papers, start with Elicit or Research Rabbit. If your bottleneck is making sense of a folder of PDFs you have already collected, what each says, where they agree and whether your claims stand up, that is the step Litrevu was built for. For a broader walk through of each option, our guide to the best AI tools for literature review covers the same tools across the whole review, not just the citation question. ## How can I check that an AI actually cited a real paper? You check by opening the source, every time, before you trust the sentence. This takes minutes and it is the single habit that separates a safe AI assisted review from a retraction risk. Do these three things. First, click through to the actual paper, not just the title. A real citation should link to a DOI, a database record or, in Litrevu’s case, the exact passage in the PDF you uploaded. If there is nothing to click, treat the reference as unverified. Second, read the sentence in the source that supports the claim. A paper can be real and still not say what the draft says it says. Find the line. If you cannot find it, the citation is wrong even though the paper exists. Third, check the details match: authors, year, journal and page numbers. Fabricated references often get one of these subtly wrong, which is a useful tell. The point of a tool that retrieves real papers is that this check is quick, because the source is right there. The point of an integrity first workflow is that you still do the check. ## What does cited AI output with traceable citations look like? Traceable output is text where every in-text marker links back to a specific document you can open. Below is a format illustration, not a real result. The bracketed markers are placeholders; in an actual Litrevu answer each one opens to a passage in a paper you uploaded, and the author and year would be the real details from that PDF. Research on this question has moved in two directions. Several of the uploaded studies argue for a structural explanation (Author, Year; Author, Year), while a second group foregrounds individual level factors [Source 3]. The two positions are not fully reconciled: (Author, Year) notes that the structural account struggles to explain the variation reported in [Source 5]. Grouping the papers by that fault line would give your review a clear structure. Notice what the illustration does and does not do. It shows the shape: synthesis across sources, a named tension, markers that point somewhere. It does not invent a finding, a statistic or a real author, because the whole value of traceable output is that you can verify it, and there is nothing here to verify. When you ask your own papers, the placeholders become real citations, and you open each passage before you rely on it. ## What do these AI research tools cost for a postgraduate student? Most of the tools here run on a subscription, and Litrevu is a one-time purchase rather than a monthly plan, so the durable question is not the exact figure, which changes, but whether a free tier lets you test the tool on your own work before you pay. Third party "cheapest tool" lists tend to disagree with each other and go stale the day a vendor reprices, so check each tool’s own pricing page for the current number rather than trusting a blog table. For Litrevu specifically, the free tier is 25 messages and 2 drafted sections every 30 days with no credit card required, which is enough to run a real set of your own PDFs through it and judge the output before deciding. For the others, Elicit and Consensus each publish a free tier worth using before you commit, and Scite and Research Rabbit publish their own plans, so check their pages for what is currently on offer. As of August 2026 the honest advice is the same for all of them: try the free tier on your actual papers, because a tool that suits a systematic review of 500 abstracts is not the tool that suits working through 30 papers you have already chosen. How many papers you need also depends on how long your literature review is meant to be at your level. ## Frequently asked questions ## Does ChatGPT cite real sources for a literature review? Not reliably. ChatGPT generates references as text, so it can produce citations that look correct but point to papers that do not exist. It is genuinely useful for rephrasing or structuring text you provide, but you should source and verify citations in a tool that retrieves real papers, then check each one yourself. If you do quote an AI assistant directly, follow the correct format for citing ChatGPT and AI sources . ## Is there an AI that only uses my own uploaded papers? Yes. Litrevu cites only the papers you add to your library, and each citation opens to the passage it came from in those files. Elicit also reads uploaded PDFs, alongside its search index, so uploading your own papers is not unique to one tool. If your priority is reading, comparing and checking strictly the set you chose, that is what Litrevu is for. ## Will an AI literature review tool get me flagged for academic misconduct? The risk is less the tool than how you use it. Many university AI policies allow AI as a study aid, for reading, searching and summarising your sources, often with a declaration. What they forbid is submitting AI-written text as your own, and at many universities that includes text you have edited. Check your institution’s policy, check that each citation says what you claim, write your own text, and declare how you used AI. ## What is the difference between Elicit and Litrevu? Elicit is strongest at finding and screening papers across a large body of literature and extracting data into tables. Litrevu is strongest at working with papers you have already gathered: answering questions about them with the passage behind each claim, comparing studies side by side and checking your own writing against them. You can use Elicit to build the set and Litrevu to work through it. ## How do I know a citation from an AI tool is not fabricated? Open the source. A real citation links to a DOI, a database record or your uploaded PDF, and the supporting sentence is findable inside that document. If there is nothing to click, or you cannot find the claim in the source, treat the citation as fabricated regardless of how correct it looks. ## Ask Your Own Papers If you have already gathered your papers and the wall you have hit is making sense of them, what each one says, where they agree and whether your own claims stand up, ask them. Litrevu reads the papers you add and answers your questions with a citation to the exact passage behind each claim, so you can open it and check it yourself. It is free to start, no credit card required, so you can test it on your own reading before you decide. Ask your own papers ## Related Guides - Best AI Tools for Literature Review - Can AI Write a Literature Review? - How to Cite ChatGPT and AI Sources - How to Write Inclusion and Exclusion Criteria --- # Literature Review Software Pricing for Students (2026) URL: https://litrevu.com/blog/cheapest-literature-review-software-for-postgraduate-students Category: AI & Research Writing Published: 2026-09-03 Summary: Free plans, cheapest paid tiers and student discounts for Elicit, Consensus, Scite, Rayyan and Litrevu, side by side in one table, as of September 2026. AI & Research Writing ## Literature Review Software Pricing for Students (2026) By Jessica McLaren · 3 September 2026 · 12 min read · Updated 10 November 2026 The cheapest literature review software for a postgraduate student is almost always the free tier of the tool that matches the job, not the cheapest subscription. Research Rabbit is free forever for citation mapping, Elicit’s Basic plan gives unlimited search across more than 138 million papers, Rayyan’s free plan screens up to three reviews, and Litrevu’s free plan answers questions about your own papers, citing the passage behind each answer, with no credit card. If you do need to pay, the cheapest paid tiers run from Rayyan Essential at $4.99 per seat per month (annual) and Litrevu Starter at $8.49 one-time, up to Elicit Pro at $49 per month billed annually at $588. Every price here was read on the tool’s own pricing page. Literature review software is any tool that helps a researcher find, screen, organise, analyse or draft a review of published research. The label covers five different jobs, and no single product is cheapest for all of them: finding papers, screening abstracts, checking how a paper has been cited, mapping a field visually, and reading and comparing the papers you have chosen. ## What does each literature review tool actually cost as of September 2026? The table lists what each tool’s free tier gives you, its cheapest paid tier, and whether the vendor states a student discount, all as of September 2026 and taken from each tool’s own pricing page. Prices are in US dollars because that is what every vendor displays; none of the pages showed a rand price. Tool and job Free tier Cheapest paid tier Student discount stated Elicit , finding and screening papers Basic, $0. Unlimited search across more than 138 million papers, "Limited usage" of the Research Agent Pro, $49 per month billed annually ($588 up front) None mentioned Consensus , answering questions across the literature Free, $0. 10 Pro Analyses, 10 Study Snapshots and 10 Ask Paper messages a month Premium, $8.99 per month or $108 a year Yes. 40% off with "a current and verified .edu or .ac email address" Scite , checking how a paper has been cited Connect, $0. 25 MCP credits a month, "No Assistant or Search access" Basic, $20 per month billed yearly Conditional. Discounts "if you recommend Scite to your institution" Research Rabbit , mapping a field visually Free, "$0, Forever!". Unlimited searches across 310+ million articles, up to 50 seed articles ResearchRabbit+, $10 per month annual ($12.50 monthly) None stated, but "Special country discount codes" for 100+ countries Rayyan , screening abstracts Free forever. 3 active reviews, 2 invited reviewers Essential, $4.99 per seat per month annual ($8.33 quarterly) Academic discount sits on Business, minimum 5 licences Covidence , team systematic reviews No free tier. "Trial it with 500 records now" Single, $339 a year No. States it does "not offer an additional student discount"; concessions for low- and middle-income countries Zotero , storing and formatting references Free open-source software, 300 MB of synced storage 2 GB of storage, $20 a year None stated Litrevu , reading, comparing and checking your own papers Free, $0. 25 messages and 2 drafted sections every 30 days , up to 20 sources, no credit card Starter, $8.49 one-time ( 7 days , up to 500 sources) None stated The subscription tools sit in two bands: under $10 a month (Consensus, Research Rabbit+, Rayyan Essential) and $20 to $49 a month (Scite Basic, Elicit Pro). Litrevu and Covidence are the only tools priced per purchase rather than per month, which matters if your review is a one-off chapter rather than an ongoing habit. ## Which literature review tool is cheapest for each task? Match the task to the tool, then take the lowest tier that covers it. For four of the five jobs a free tier does the whole thing; only a systematic review with a team, or more questions than Litrevu’s free plan covers, forces you to pay. The job Cheapest tool that does it What it costs, and when you outgrow it Finding papers Elicit Basic, or Consensus Free $0. You outgrow it when you need the systematic review workflow, which is Elicit Pro at $49 a month billed annually Screening abstracts Rayyan Free $0 for 3 active reviews and 2 invited reviewers. A fourth review or a PRISMA diagram means Essential at $4.99 per seat per month Checking how a paper has been cited Scite Basic (the free tier will not do it) $20 a month billed yearly, or the 7-day trial. Connect is free but has no Assistant or Search access Mapping a field visually Research Rabbit Free $0 forever, capped at 50 seed articles. Past that, ResearchRabbit+ at $10 a month annual Storing and formatting references Zotero $0, no feature limits. You only pay for synced storage past 300 MB, from $20 a year Reading, comparing and checking papers you have chosen Litrevu Free $0 for 25 messages and 2 drafted sections every 30 days , with up to 20 sources. More than that means Starter at $8.49 for 7 days , or Scholar at $29 for 3 months , each paid once Team screening at systematic-review scale Rayyan Essential, then Covidence $4.99 per seat per month, against Covidence Single at $339 a year Scite is the outlier: its free Connect tier gives 25 MCP credits a month but explicitly no Assistant or Search access, so for the job Scite is best at you are paying $20 a month billed yearly or working inside the 7-day trial. ## Which literature review tools are completely free for postgraduate students? Research Rabbit, Zotero, Rayyan Free, Elicit Basic, Consensus Free and Litrevu’s free tier all cost nothing, and none needs a credit card to start. The catch differs for each one. Research Rabbit’s pricing page says "$0, Forever!" with unlimited searches across 310+ million articles; the ceiling is 50 seed articles, enough to map a Masters topic but tight for a PhD spanning several sub-fields. Zotero is open-source software, and the only thing you would ever pay for is synced storage beyond 300 MB. Rayyan Free allows 3 active reviews and 2 invited reviewers, which covers a single-student scoping review with a supervisor doing the second screen. Elicit Basic gives unlimited search and summaries but "Limited usage" of the Research Agent and no systematic review workflow. Consensus Free caps you at 10 Pro Analyses, 10 Study Snapshots and 10 Ask Paper messages a month. Litrevu Free gives 25 messages and 2 drafted sections every 30 days , with up to 20 sources, enough to see whether the citation traceability holds on your own papers. My rule of thumb: a Masters student can usually get through the whole review without paying anyone, provided they are willing to use four tools instead of one. Elicit Basic to find, Rayyan Free to screen, Zotero to store and cite, Litrevu Free to ask questions of the papers you keep. The Best AI Tools for a Literature Review in 2026 compares the same tools on features rather than price, and How to Screen 500 Abstracts Without Reading Every One covers the screening step in detail. ## Do literature review tools offer student discounts? As of September 2026, Consensus is the only tool in this comparison with a stated, unconditional student discount: 40% off with "a current and verified .edu or .ac email address". Scite offers "discounts for students and academics if you recommend Scite to your institution", a discount with a chore attached. Covidence says outright that it does "not offer an additional student discount", though it offers concessions to users in low- and middle-income countries. The rest do not state one. Elicit’s pricing page mentions no student or education discount. Rayyan’s "Discounts available for Academics" sits against its Business plan, which starts at 5 licences, so an individual student cannot use it. Research Rabbit lists no student rate but notes "Special country discount codes available" for 100+ countries, which may matter more than a student rate if you are in South Africa or Kenya. Zotero and Litrevu do not state a student discount. One note for South African students: Consensus’s wording is ".edu or .ac", and I could not confirm from the pricing page whether a .ac.za address qualifies, so check before you count on the 40%. ## Is it worth paying for Elicit, Consensus or Scite as a student? Pay for Elicit Pro only if you are running a systematic review with thousands of records; pay for Consensus Premium only if you regularly hit the free cap of 10 analyses a month; pay for Scite Basic only in the weeks you are actually checking citation context. For most postgraduate reviews, the free tiers of Elicit and Consensus do the finding and summarising well enough that the upgrade does not earn its money back. Elicit Pro is $49 per month billed annually, $588 up front, and what you get over Basic is "Standard usage", a systematic review workflow that screens up to 5,000 papers, 20 extraction columns and 10 research alerts. For large-scale screening Elicit beats every other tool in this comparison, including Litrevu. Consensus Premium at $8.99 per month ($108 billed annually, 40% less with a verified student email) is the easiest upgrade to justify, because 10 Pro Analyses a month runs out fast; Consensus remains a poor fit for working through thirty papers you have already chosen. Scite Basic at $20 per month billed yearly is the hardest to justify, since the free tier gives you nothing you would use, but no other tool in this comparison shows whether later papers support or contrast a finding, so a month or two during writing up can be worth it. ## What does Litrevu cost, and what do you get for the money? Litrevu is free for 25 messages and 2 drafted sections every 30 days with no credit card, then $8.49 one-time for Starter ( 7 days , up to 500 sources) and $29 one-time for Scholar ( 3 months , up to 500 sources), with no subscription, as shown on litrevu.com; the Starter tier carries a 30-day money-back guarantee. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The honest positioning: Litrevu does one job, helping you work through papers you have already chosen by asking what they say, comparing them and checking your own writing against them. Litrevu does not search a corpus the way Elicit does (its only search is an open-access lookup when you add sources), map citations the way Research Rabbit does, or screen abstracts the way Rayyan does. Working from your own uploaded PDFs is not the difference either, since Elicit accepts uploads too. The difference is the shape of the work: Elicit’s own documentation describes its output as reports, tables and structured comparisons, while Litrevu is a conversation with your own papers in which each in-text citation opens the passage it came from, so the student can check the claim. Litrevu is built in South Africa (co-founder Samuel de Bruyn) and its users are mostly postgraduate students and researchers in South Africa, the UK, US, Australia and Kenya. Here is the shape of what comes back. This is a format illustration only, with placeholder tokens, not a real result: Recent work on this topic falls into two broad strands. The first strand (Author, Year; Author, Year) treats the phenomenon as primarily structural, drawing on [Source 1] and [Source 2] to argue that observed variation reflects institutional design. The second strand (Author, Year) foregrounds individual-level factors, and [Source 3] reports findings that partly contrast with [Source 1] on this point. Taken together, these studies leave open the question of how the two levels interact, a gap that [Source 4] identifies but does not resolve. Each "[Source n]" marker points to a passage in one of the student’s uploaded PDFs, and opening it shows that passage. An answer like this is material to think with, not text to submit: the student checks each citation against its passage and writes the review themselves. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. For which AI tools cite sources you can open, see Which AI Tools Cite Real Sources for a Literature Review? . Where Litrevu loses: if you do not yet have your papers, Elicit’s free search is the better starting point; if you need a team screening 3,000 records, Rayyan or Covidence is the right purchase; and if you only need it for one short assignment, Starter is the cheaper way in. Paying from Kenya is covered in How to Pay for Litrevu in Kenya . ## Frequently asked questions ## Is there any literature review software that is completely free with no limits? Research Rabbit comes closest: its pricing page says "$0, Forever!" with unlimited searches and unlimited collections, and the only cap on the free plan is 50 seed articles. Zotero is free open-source software with no feature limits; the 300 MB cap applies only to synced file storage. ## Which literature review tool has the cheapest paid plan? Rayyan Essential at $4.99 per seat per month on annual billing is the lowest monthly figure, followed by Consensus Premium at $8.99 per month ($108 billed annually) and Research Rabbit+ at $10 per month on annual billing. Litrevu Starter at $8.49 is the cheapest one-time purchase, a single payment for a pass that runs 7 days , rather than a recurring charge. ## Does Elicit have a student discount? No student, academic or education discount is mentioned on Elicit’s pricing page. Elicit’s plans are Basic (free), Pro at $49 per month billed annually at $588, Scale at $169 per month billed annually, and Enterprise at custom pricing. ## Can I write a whole literature review using only free tools? Yes, for most Masters and many PhD reviews. Elicit Basic finds papers, Rayyan Free screens them, Research Rabbit Free maps the citation network, Zotero stores and formats references, and Litrevu Free answers questions about the papers you chose, citing the passage behind each claim. Free stops being enough for a large systematic review with a team, where Rayyan Essential ($4.99 per seat per month) or Covidence Single ($339 per year) becomes necessary. ## Is Litrevu a subscription? No. Litrevu’s pricing page says "Nothing renews", and the tiers are Starter at $8.49 for 7 days , Scholar at $29 for 3 months and Platinum at $69 for 12 months , each a single purchase. The free tier is 25 messages and 2 drafted sections every 30 days with no credit card required, and the Starter tier carries a 30-day money-back guarantee. ## Ask your own papers Once you have found, screened and chosen your papers, the slow part is understanding thirty PDFs well enough to write about them. Litrevu reads every paper you add, answers your questions with a citation to the exact passage behind each claim, and compares studies side by side. It is free to start, no credit card required. Ask your own papers free ## Related Guides - The Best AI Tools for a Literature Review in 2026 (Honest Comparison) - Best Elicit Alternatives for Writing a Literature Review (2026) - Zotero vs Mendeley vs EndNote: Which Reference Manager Should You Use in 2026? - Can AI Write a Literature Review? What You Need to Know (2026) --- # How to Write a Literature Review for a Research Proposal (2026 Guide) URL: https://litrevu.com/blog/how-to-write-a-literature-review-for-a-research-proposal Category: Literature Review Published: 2026-08-31 Summary: Write a proposal literature review that justifies your study: verified length limits from Leeds, Wits, Stellenbosch and UNISA, the funnel structure, how to state a gap without overclaiming, and a worked five-paragraph outline. Literature Review ## How to Write a Literature Review for a Research Proposal (2026 Guide) By Samuel de Bruyn · 31 August 2026 · 12 min read · Updated 8 September 2026 A literature review for a research proposal is a short, argued summary of the studies that matter most to your topic, written to show where the knowledge runs out and to land on your research question. It is not a survey of everything published. Aim for a few pages that move from the field, to the specific problem, to the gap, and end with the sentence that states what you will study. A proposal literature review is the section of a Masters or PhD research proposal that uses selected prior studies to justify the proposed study: it establishes what is known, shows what is missing or contested, and leads directly to the research question or aim. Its job is persuasion, not coverage. For the rest of the document, see how to write a research proposal . ## What is the literature review in a research proposal actually for? Its purpose is to justify your study. The Wits Faculty of Health Sciences guidelines for higher-degree applicants say so outright: "Only information relevant to the study should be included as the primary purpose to this part of the protocol is to justify the study in the light of previous information" ( Wits, guidelines on proposal development ). Wits would rather call the section a "background literature analysis and critique". Sheffield’s Sociological Studies department calls the proposal’s literature component "a short note of key existing literature" and adds that "literature reviews are not simply descriptive mapping exercises at PhD level" ( Sheffield, writing a research proposal ). The University of Edinburgh’s 2024 guide explains why: "Research proposals have a limit on words or pages so you won’t be able to analyse the whole existing body of literature" ( Edinburgh, how to write a research proposal ). Funders read it the same way. The DSI-NRF Master’s and Doctoral scholarship guide for 2025 asks for "a concise overview of the proposed research" with "appropriate literature references" and warns that "applications with no or insufficient research content will be rejected" ( DSI-NRF postgraduate funding guide for 2025 ). Concise, referenced, justificatory. That is the whole brief. ## How long should the literature review in a research proposal be? Usually two to five pages, or roughly 1,200 to 1,400 words where a department counts words, but the only figure that matters is your own faculty’s. Here are the figures I could read on the institutions’ own pages, as of August 2026. Institution and document Whole proposal Literature review specifically Leeds , School of Earth and Environment (PhD) Section word ranges given, not a single total 1,200 to 1,400 words, and it must include "a clear statement of your research questions" Sheffield , Sociological Studies (PhD) Approximately 1,500 to 2,000 words "A short note of key existing literature", no separate figure Wits , Health Sciences (MSc and PhD) Not more than 10 pages for an MSc, 15 for a PhD; rejected if more than 5 pages over "Usually about five pages and between ten to twenty references will suffice" Stellenbosch , FMHS (PhD) Between 12 and 25 pages, excluding cover page, references and annexures "Condensed into 2 to 5 pages", using "the most up to date literature" UNISA , CAES (Masters and doctoral) Masters not more than 20 pages, doctoral up to 35 including references and figures About one third to one half of the narrative UCT , Philosophy (Masters and doctoral) Masters usually 3 to 6 typed pages, doctoral 6 to 12 No separate figure; asks for a single research question with sub-questions University of Pretoria , Communication Management About 15 to 20 typed pages No separate figure; must define key concepts and give "a focussed summary of relevant previous research" Sydney , PhD application "Usually no more than 2000 words, but check the requirements of your degree" No separate figure The spread is real: a Sheffield politics applicant has 2,000 words for the whole proposal, while a UNISA environmental sciences doctoral candidate can run to 35 pages. Find your faculty’s document before you write a word. For the dissertation chapter rather than the proposal section, see how long a literature review should be . ## How is a proposal literature review different from a dissertation literature review chapter? The proposal version is shorter, selective, written in the future tense and ends on the question; the dissertation chapter is longer, comprehensive, and written in the past tense after the reading is complete. UNISA CAES states the tense rule plainly: "the past tense is used in the thesis whereas the future tense is used in proposal." ## How should I structure a proposal literature review? Use a funnel: open at the field, narrow to the specific problem, narrow again to what has and has not been done, and close on your research question. The Wits Health Sciences guidelines describe exactly this: the paragraphs "should be carefully structured and lead the reader carefully and deliberately towards the final paragraph which should contain the research question/aim." A two to five page proposal review has four moving parts: - The field and why it matters. One or two paragraphs. Establish the phenomenon, its stakes and the main lines of enquiry. Cite the landmark or most recent work, not everything. - What is known about your specific problem. The core. Group studies by theme or finding, not one paragraph per paper: what they agree on, where they disagree, which methods dominate. - What is missing, contested or untested. The gap. Name it precisely: a population not studied, a context not covered, a method not applied. See how to find a research gap . - The research question. A short closing paragraph that turns the gap into the question or aim. Leeds SEE asks for "a clear statement of your research questions" inside the literature review itself. If your faculty prescribes sub-headings, follow them. The University of Pretoria’s Communication Management Division, for instance, requires "conceptual and operational definitions of all the key concepts/constructs" and "a focussed summary of relevant previous research". That is still a funnel, with definitions front-loaded. ## What should I include in a proposal literature review, and what should I leave out? Include the studies that carry your argument to the gap, and leave out everything that only proves you have read widely. The Wits Health Sciences figure of "ten to twenty references" for about five pages is a sanity check: sixty citations in four pages is a bibliography with commentary, not a review. Keep the two or three foundational studies that define the problem. Keep the most recent work; Stellenbosch FMHS tells applicants to "make use of the most up to date literature." Keep studies that disagree, since disagreement is where gaps live, and any study that used the method or setting you plan to use. Cut background a specialist already knows. Wits says the introduction is written for "the non-expert but intelligent reader": enough to orient, not enough to teach. Cut summaries of papers you will not use again, long critiques of individual studies, and your own opinions or pilot results. My own rule of thumb: every paragraph should end closer to your research question than it started, or it goes. ## How do I show the research gap without overclaiming? State what the existing studies did, state what they did not do, and claim only the difference. The UNISA CAES guide defines it simply: "The GAP refers to research that has NOT been done." Edinburgh’s guide lists "making over-ambitious claims about the intended research" among the things to avoid, and a reviewer who reads "no study has ever" will run a quick search to test it. Three habits keep the gap honest. Scope the claim: "no published South African study has tested X in Y context" is checkable, "nobody has studied X" is an invitation to be corrected. Show the search: one sentence naming databases, terms and date range makes the gap a finding, not a hope. Prefer "limited", "contested" or "untested in" over "none"; Sheffield asks only that the question be "something that has not been posed before", which a new angle, population or method satisfies. Then convert the gap into the question. UCT Philosophy advises applicants to "aim to state a single research question, which you may then choose to flesh out through a number of sub-questions." If the phrasing will not come, see how to write a research question . ## What mistakes do examiners flag in proposal literature reviews? The most common are reading too little, describing instead of arguing, and failing to connect the review to the aim and methods. UNISA’s CAES guide lists reasons proposals fail, and several sit squarely in the literature review: "Inadequate knowledge, have not read enough", "Muddled thinking", "Lack of logic", "No clear aims and objectives", "Title, introduction, aim, objective and methods not collated", and "Plagiarism/insufficient referencing". Not read enough: the reviewer knows the field, and if the obvious recent paper is missing they will assume you did not find it. Muddled thinking usually means organising by paper rather than by argument; Wits’s instruction to "review the literature first (read through it) and then analyze and critique" is the fix. Not collated: if the review ends on a gap about rural clinics and the methods sample urban ones, the reviewer will notice. And from Edinburgh: "A surprisingly large percentage of proposals are rejected simply because they do not follow the rules." Over the page limit, wrong referencing style, missing headings. ## Can I see a worked outline for a proposal literature review? Yes. Here is a skeleton for a section of roughly three to five pages, with placeholders you replace. - Paragraph 1: the field. [Phenomenon] is a recognised problem in [setting] because [stakes]. Research has approached it through [line of enquiry A] and [line of enquiry B] (Author, Year; Author, Year). - Paragraph 2: what is established. Within [line of enquiry], studies of [specific problem] agree that [consistent finding] (Author, Year; Author, Year). Most of this work used [dominant method] in [dominant context]. - Paragraph 3: where the literature disagrees. Findings on [sub-issue] are mixed: (Author, Year) reports [pattern], while (Author, Year) found [contrasting pattern], possibly because [difference in method or setting]. - Paragraph 4: the gap. No study identified in [databases searched, date range] has examined [specific problem] in [population, context or with method]. The closest is (Author, Year), which [what it did and what it left open]. - Paragraph 5: the research question. Therefore the aim of this study is to [aim]. The primary research question is: [question]. Sub-questions address [sub-question 1] and [sub-question 2]. That closing mirrors what Wits Health Sciences asks for ("Therefore the aim of my study is to ..."). If your faculty puts the research question in its own section, end paragraph 4 by pointing to it. A problem statement can absorb paragraph 4 if space is tight. ## Can AI help me draft the literature review section of a proposal? It can help with the reading. Check your institution’s policy before you let it near the writing: many universities do not allow AI-written text in submitted work, even after you edit it, and the reviewer is assessing your reading, not the software’s. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. It can also draft cited text from those papers; if you use that at all, check that your policy allows it and declare how you used AI. Elicit is strongest at finding and screening papers across a large corpus, the step before a proposal review. Consensus gives a fast evidence summary for a single question. Scite shows whether later papers support or contrast a claim, useful when checking that a gap is real. Research Rabbit maps a citation network visually. Litrevu’s strength is narrower: reading the papers you have already chosen, comparing them side by side, and checking your own paragraphs against them. Here is the shape a funnel paragraph takes in a proposal, a format illustration with placeholder tokens only. Each "[Source n]" marks a claim that needs a passage you have read: Research on [topic] has concentrated on [theme A] (Author, Year; Author, Year) and, more recently, on [theme B] (Author, Year) [Source 1] [Source 2]. Across these studies, [consistent finding] is reported in [context] [Source 3], although (Author, Year) observed [contrasting pattern] under [condition] [Source 4]. Fewer studies have addressed [specific problem] in [population or setting], and none of these studies examined [gap] [Source 2] [Source 5]. This gap motivates the present study’s focus on [research question]. Before a sentence like this goes in, open the passage it rests on and confirm it says what you are claiming. Asking Litrevu where your papers discuss [specific problem] is one quick way to find it. ## Frequently asked questions ## Does the literature review in a proposal need a separate heading? Follow your faculty’s template. Leeds SEE lists "Literature review" as its own section with its own word range, while Wits Health Sciences treats it as background material it would rather call a "background literature analysis and critique". If no template exists, a heading such as "Literature Review" or "Background and Rationale" is safe. ## How many references should a proposal literature review cite? Enough to carry the argument to the gap and no more. The only published figure I found is from Wits Health Sciences, which says "between ten to twenty references will suffice" for a section of about five pages. Prioritise recent, directly relevant work over volume. ## Should the research question go inside the literature review or in its own section? It depends on the faculty. Leeds SEE requires "a clear statement of your research questions" within the literature review, and Wits Health Sciences wants the research question or aim in the final paragraph of the background. Where a department gives it a separate section, the literature review should end by pointing directly at it. ## Can I reuse the proposal literature review in my dissertation? You can reuse the reading and the argument, but the chapter will need rewriting. The dissertation chapter is longer, covers more, and switches to past tense for the completed study, as the UNISA CAES guide notes. ## Ask your own papers Once you have chosen the papers that carry your argument, the slow part is seeing how they connect: which findings agree, where they disagree, and what none of them covers. Ask Litrevu, and every answer links to the passage it came from, so the paragraphs that funnel toward your question rest on reading you have checked. It is free to start, no credit card required. Try Litrevu free ## Related Guides - How to Write a Research Proposal (Template + Examples) - How to Find a Research Gap (Step-by-Step, With Examples) - How Long Should a Literature Review Be? (Word Count Guide by Degree) - How to Write a Research Question (Step-by-Step, With Examples) --- # How to Cite a Source Within a Source (APA, Harvard, MLA) URL: https://litrevu.com/blog/how-to-cite-a-source-cited-in-another-source Category: Writing Sections Published: 2026-08-27 Summary: In APA 7, name the original and add "as cited in" plus the source you read: (Smith, 2010, as cited in Jones, 2019). Only Jones goes in your reference list. Writing Sections ## How to Cite a Source Within a Source (APA, Harvard, MLA) By Jessica McLaren · 27 August 2026 · 12 min read · Updated 25 October 2026 Cite the source you actually read, and name the original inside the in-text citation with "as cited in" (APA 7), "cited in" or "quoted in" (Harvard), "qtd. in" (MLA) or "quoted in" (Chicago). Only the source you read goes in your reference list, except in Chicago, where both appear in the note. Before any of that, try to find the original, because every style guide and most supervisors expect you to read what you cite. A secondary citation (also called an indirect citation or secondary referencing) is a citation to a work you have not read yourself, which you know about only because a source you did read summarised or quoted it. The source you read is the secondary source; the work it mentions is the original. ## When is it acceptable to cite a source I found in another source? A secondary citation is acceptable when the original is genuinely out of reach, and that should be rare. APA 7 guidance, as reproduced by the Atlantic Technological University library, says to cite secondary sources "sparingly", for instance "when the original work is out of print, unavailable, or available only in a language that you do not understand" ( Atlantic Technological University, APA 7 secondary sources ). If the original is a 2019 journal article your library can get through interlibrary loan, "unavailable" does not apply. The same guidance leads with the instruction most students skip: "If possible, find the primary source, read it, and cite it directly rather than citing a secondary source." Anglia Ruskin University’s Harvard guide is blunter: "it is best to avoid using secondary referencing" ( Anglia Ruskin University, Harvard referencing ). The dishonest alternative is citing the original as if you read it. If Smith misquoted Johnson and you cite Johnson directly, you have put your name to Smith’s mistake. ## How do I cite a source I found in another source in APA 7? In APA 7, name the original work in your sentence or in the parentheses, then write "as cited in" followed by the source you actually read, its year, and a page number if you are quoting. Only the source you read appears in the reference list. The rule is section 8.6 of the Publication Manual (page 258), according to the Camosun College library’s APA 7 guide ( Camosun College, indirect sources ). Purdue OWL’s version: "Name the original source in your signal phrase. List the secondary source in your reference list and include the secondary source in the parentheses" ( Purdue OWL, APA in-text citations ). Its two example forms: - Johnson argued that... (as cited in Smith, 2003, p. 102). - (Johnson, 1985, as cited in Smith, 2003, p. 102) Two details trip people up. First, the year of the original: Camosun’s guide says "When the year of the indirect source is known, include it in the text"; if you do not know Johnson’s year, leave it out rather than guess. Second, the reference list: "Only the source you have in hand is the one that goes into your Reference list." Johnson gets no entry. For a quotation, the page number belongs to the source you read: in National University’s APA 7 example "(as cited in Bratton & Strittmatter, 2013, p. 432)", page 432 is Bratton and Strittmatter’s page ( National University, APA 7 secondary sources ). A note on sourcing: the APA Style website’s own secondary sources page is the authority here, but it was not accessible when I checked, so the wording in this section comes from university library guides that reproduce it. Our APA citation format guide covers the rest of the rules. ## How do I cite a source cited in another source in Harvard referencing? In Harvard, write the original author and year, then "cited in" (or "quoted in" for a word-for-word quotation), then the author, year and page of the source you read. List only the source you read. Harvard is a family of styles, so the guide I am following is the Cite Them Right Harvard version published by the University of Wolverhampton library, with Stellenbosch and UNISA for South African comparison. Wolverhampton gives two forms ( University of Wolverhampton, secondary referencing ): - Harvey (2015, quoted in Lewis, 2018, p. 86) provides an excellent survey... - White’s views on genetic abnormalities in crops (2014, cited in Murray, 2018)... The two words are not interchangeable in Cite Them Right: "quoted in" when the secondary source reproduces the original word for word, "cited in" when it paraphrases or summarises. For the reference list: "Only reference the source you actually used." So Lewis (2018) and Murray (2018) get entries; Harvey and White do not. South African universities use their own Harvard variants, and the punctuation shifts. Stellenbosch University’s Harvard (Stellenbosch) guide calls this a "Citation within citation (Secondary reference)" and formats it as "(Coates, cited in Lee, 1986:34)", with a colon rather than "p." before the page number and no year for Coates ( Stellenbosch University, Harvard A to Z ). Its instruction is "In the reference list, write the source that has been used", and the entry it shows is Lee’s article. UNISA’s CEMS Harvard guide takes the same position: only the source where you read about the original goes in the list, and "your text should make it clear that you have not read the original" ( UNISA, CEMS Harvard guide ). Follow your own faculty’s guide, because a marker checking against the Stellenbosch format will flag "p. 34" where "1986:34" is expected. Our Harvard referencing guide walks through the main variants. ## How do secondary citations differ across APA, Harvard, MLA and Chicago? Every style agrees on the principle (read the original if you can, and be transparent if you cannot) but the wording, punctuation and reference list differ. The table lists only formats verified on an official style page or a university library guide. Style (source of the rule) In-text form What goes in the list APA 7 (Purdue OWL, Camosun) (Johnson, 1985, as cited in Smith, 2003, p. 102) Only the source you read Harvard, Cite Them Right (Wolverhampton) Harvey (2015, quoted in Lewis, 2018, p. 86) for a quotation; (2014, cited in Murray, 2018) for a paraphrase Only the source you actually used Harvard, ARU variant (Anglia Ruskin) (Brown, 1966 cited in Bassett, 1986, p.142) Only works you have read Harvard, Stellenbosch variant (Coates, cited in Lee, 1986:34) The source that has been used MLA (MLA Style Center) (qtd. in Damrosch 239) Works-cited entry for the source you read only Chicago notes (Chicago Manual of Style, 14.260) Note gives the original, then "quoted in" the source you read Both, when the original is unavailable Chicago is the outlier: the only style here that requires the original’s full details alongside the source you read, and the one that discourages the practice most strongly. For MLA, the MLA Style Center’s post of 20 September 2023 on indirect sources gives the pattern: According to Alexander Pope, "A little learning is a dang’rous thing" (qtd. in Damrosch 239). The works-cited entry is for Damrosch’s book only, and the original author’s name "can appear in the prose, in the in-text citation, or in an endnote" ( MLA Style Center, citing indirect sources ). For Chicago, the Chicago Manual of Style’s online Q&A points to paragraph 14.260: "To cite a source from a secondary source (‘quoted in . . .’) is generally to be discouraged, since authors are expected to have examined the works they cite." Then the exception: "If an original source is unavailable, however, both the original and the secondary source must be listed" ( Chicago Manual of Style Q&A ). The example note runs Louis Zukofsky’s 1931 Poetry article, page 269, "quoted in" Bonnie Costello’s 1981 book, page 78. I could not verify a Chicago author-date form on a primary page, so I have left it out. Our guide to citing sources in a research paper compares the base formats of six styles. ## Why do supervisors and journals discourage secondary citations? Secondary citations are discouraged because a citation is a claim that you examined the work, and a secondary citation admits you did not. The Chicago Manual of Style says so directly: the practice "is generally to be discouraged, since authors are expected to have examined the works they cite." UNISA’s CEMS Harvard guide frames it as a reading obligation: "Wherever possible, it is important to read the original work, but this may be difficult in some instances." For a postgraduate literature review the objection is sharper, because a review’s value is your judgement of the primary evidence. If a chapter says "Study A found X (as cited in Review B)", a supervisor will ask why you did not read Study A when Study A is the thing you are supposed to be evaluating. In my experience, one or two secondary citations in a thesis for unobtainable works pass without comment; a dozen in a chapter on recent literature read as a shortcut. Manchester Metropolitan University’s Cite Them Right Harvard page gives the advice that applies everywhere: "check with your tutor if it is acceptable to use secondary citations in your academic work" ( Manchester Metropolitan University, Cite Them Right Harvard ). Journals vary too, so read your target journal’s author guidelines before you submit. ## How do I find the original source instead of citing it second-hand? Take the full reference from the source you read, search the title in Google Scholar and your library catalogue, and request it through interlibrary loan if it is not held. Most secondary citations in postgraduate drafts are for works obtainable within a week, so they fail the APA test of "out of print, unavailable, or available only in a language that you do not understand". Once you have the original, read the passage the secondary source pointed to, and read around it; often the original hedged a claim the secondary source stated flatly. Then cite the original directly and drop "as cited in". Our guide to paraphrasing in academic writing covers restating what you found without drifting into the secondary source’s wording. If you truly cannot get it, apply the University of Wolverhampton’s Cite Them Right Harvard distinction (the original’s words, "quoted in"; its ideas as summarised, "cited in"), cite it that way and move on. One honest "cited in" beats a week lost to a 1962 conference proceeding. ## How does Litrevu handle a citation that sits inside another paper? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. It only cites the PDFs a researcher uploads, so a work merely mentioned inside one of those PDFs cannot become a citation of its own. Built in South Africa and co-founded by Samuel de Bruyn, Litrevu is free to start with no credit card required, as of August 2026. When an uploaded paper summarises an earlier study, the answer cites the uploaded paper, because that is where the passage came from, and opening the citation shows you the claim is second-hand. Here is the shape of that, with the check you then make, as a format illustration only, with placeholder tokens rather than real names or findings: [Source 1] reports that an earlier study by (Author, Year) reached a similar conclusion in a different population. [Your check: (Author, Year) is cited within [Source 1] and is not among your uploaded papers. Read the original before citing it, or cite it as "(Author, Year, as cited in [Source 1])".] That is a format illustration, not a real output. The researcher then fetches the original and uploads it, or keeps the secondary citation in their own style’s format and takes responsibility for it. Either way the citation decisions, and the sentences in the review, are the researcher’s own. Scite is stronger at showing whether later papers support or contrast a claim, and Research Rabbit is stronger at mapping the citation network that leads you to the original; Litrevu does neither. The checks in how to spot fake AI citations before you submit apply to secondary citations too, since an original you never saw can be wrong without you noticing. ## Frequently asked questions ## Do I put both sources in my reference list for a secondary citation? In APA 7, Harvard and MLA, no: list only the source you actually read. Purdue OWL’s APA rule is to "List the secondary source in your reference list", and Anglia Ruskin’s Harvard guide says the list "should only contain works that you have read". Chicago notes-bibliography style is the exception, where the Chicago Manual of Style Q&A says "both the original and the secondary source must be listed" in the note when the original is unavailable. ## What is the difference between "cited in" and "quoted in" in Harvard? In Cite Them Right Harvard, as set out by the University of Wolverhampton library, "quoted in" is for a passage the secondary source reproduces word for word, and "cited in" is for an idea it paraphrases or summarises. APA 7 uses "as cited in" for both. Stellenbosch and Anglia Ruskin Harvard guides show only "cited in". ## Do I include the year of the original source in an APA secondary citation? Yes, when you know it. Camosun College’s APA 7 guide, following section 8.6 of the Publication Manual, says "When the year of the indirect source is known, include it in the text", giving "(Tuso, 2013, as cited in King et al., 2020, p. 52)". If the secondary source does not give the original’s year, omit it rather than guess. ## Can I use a secondary citation in my thesis or dissertation? Usually yes, for a small number of genuinely unobtainable works, but check your department’s rules first. Manchester Metropolitan University’s Cite Them Right Harvard page tells students to "check with your tutor if it is acceptable to use secondary citations in your academic work". UNISA’s CEMS Harvard guide expects your text to "make it clear that you have not read the original". ## Keep the originals in front of you The cleanest way to avoid secondary citations is to have the originals in front of you when you write. Add the papers you have gathered to Litrevu and ask what they say: each citation opens the passage it came from, so you can see whether a claim is the author’s own or one they report from an earlier study. It is free to start, no credit card required. Ask your own papers ## Related Guides - Harvard Referencing: The Complete Guide with Examples - APA Citation Format: The Complete Guide with Examples - How to Spot Fake AI Citations Before You Submit (2026 Guide) - How to Paraphrase Sources in Academic Writing (Without Plagiarizing) --- # Do You Need Ethics Approval for a Literature Review? (2026 Guide) URL: https://litrevu.com/blog/do-you-need-ethics-approval-for-a-literature-review Category: Literature Review Published: 2026-08-21 Summary: Most literature reviews do not need ethics approval, but UNISA requires clearance for literature review studies and St Andrews does not. Six university policies compared, plus what to write in your methods section. Literature Review ## Do You Need Ethics Approval for a Literature Review? (2026 Guide) By Jessica McLaren · 21 August 2026 · 9 min read Usually not, but "usually" is doing real work in that sentence. The answer is set by your institution rather than by your method, and two universities can read the same review two different ways. A review that only reads published papers is secondary research, and many universities exempt it. The University of St Andrews states plainly that "literature reviews, including systematic reviews and meta-analyses, do not require ethical review" unless the review analyses raw data or raises specific ethical issues ( St Andrews, ethical review ). UNISA takes the opposite line: its Masters and Doctoral ethics guidance says all research must be considered for ethical clearance before it may commence, and that this "includes research involving human participants, animals, conceptual work, the use of secondary data, laboratory experiments and literature review studies" ( UNISA, College of Economic and Management Sciences ). So the answer is not decided by your method. It is decided by your institution, and you have to go and read its policy rather than reason it out from first principles. ## What counts as secondary research for ethics purposes? Secondary research is research that analyses material which has already been published or made publicly available, without collecting any new data from people. A standard literature review is secondary research: you read published papers, compare what they found, and write about the pattern. That definition is what most ethics policies are testing for when they ask whether your project involves human participants. You read papers, you do not recruit anyone, so there is no participant in your study to protect. The University of Cambridge School of the Biological Sciences puts the boundary in one sentence. Studies that do not require ethical review include "those involving information freely available in the public domain (e.g. published biographies, newspaper accounts), and the analysis of datasets, either open source or obtained from other researchers, where the data are properly anonymised and informed consent was obtained at the time of original data collection" ( Cambridge, School of the Biological Sciences ). Notice the two conditions attached to the dataset half of that sentence. Anonymised, and consented at source. Reading the discussion section of a published paper clears both without you having to think about it. Downloading the supplementary file and re-analysing the participant rows does not. ## Why does one university require clearance when another does not? Because ethics committees are institutional, not national, and they set their own screening thresholds. As of August 2026, the published policies of six universities in South Africa and the UK split three ways on a review that reads nothing but published papers. Institution (country) Literature-only review needs clearance? What the policy actually says UNISA (South Africa) Yes, it must be submitted for consideration "All research must ... be considered for ethical clearance before it may commence", and this includes "literature review studies" UCT, Faculty of Commerce (South Africa) No Research "involving only the use of secondary data ... does not require the completion of either the pre-screening questionnaire (PSQ) or the completion of an application for ethical clearance" Wits (South Africa) Depends on the screening test Clearance is for research that "may impact directly or indirectly on people, animals or the environment" St Andrews (UK) No, with two named exceptions "Literature reviews, including systematic reviews and meta-analyses, do not require ethical review unless" the review analyses underpinning raw data, or raises issues such as social profiling or sensitive personal data UCL (UK) No "Use of information available in the public domain" and "use of anonymised records and datasets in the public domain" are listed as minimal risk activity Cambridge, Biological Sciences (UK) No, if two conditions hold Public-domain information and properly anonymised datasets with consent obtained at original collection UNISA is the outlier worth knowing about if you study in South Africa, and the wording is deliberate. The same page says "it is not for the candidate to decide whether his/her research requires ethical clearance." That sentence is the whole rule: at UNISA the screening decision belongs to the committee, not to you, even when you are confident the answer is obvious. ## Does my review need approval if I analyse the data inside the papers? Analysing participant-level data from inside a paper is the line most students cross without noticing, and yes, crossing it can pull a literature review into ethical review. The University of St Andrews names it as the first exception to its exemption for literature reviews: ethical review is required where the review "includes analysis of the underpinning raw data or of a dataset attached to a publication" ( St Andrews, ethical review ). The practical test is what you open. If you extract the reported effect sizes, sample sizes and confidence intervals from the results tables of published papers and combine them, you are doing a meta-analysis of published summary statistics, which the policies of St Andrews, UCL and Cambridge all treat as secondary research. If you download the individual participant data that a paper deposited alongside itself and run your own analysis on those rows, you are working with a human dataset, and the two conditions set by the University of Cambridge School of the Biological Sciences apply: the data has to be properly anonymised and informed consent has to have been obtained at the time of original data collection ( Cambridge, School of the Biological Sciences ). An individual participant data meta-analysis is a different animal from a standard review, and it is worth reading the difference between a literature review and a systematic review before you commit to one. ## What else turns a literature review into a study that needs review? Three things, and none of them are about how many papers you read. The University of St Andrews lists the second exception to its literature review exemption as a review that "will raise ethical issues such as around social profiling, data management issues such as managing sensitive personal data, or access issues" ( St Andrews, ethical review ). Scraping is the common trap. A study of what people post about a condition in public forums looks like desk research and reads like human subjects research to a committee, because the posts are attributable to identifiable people who did not consent to being studied. The University of Cambridge School of the Biological Sciences flags this directly, noting that even studies analysing public online resources may still need review to confirm participants gave informed consent and that data storage meets current protections ( Cambridge ). Sensitive personal data is the second trap: health, sexuality, religion, criminal records, immigration status. UCL adds a third that is not about risk at all, warning that approval may be required "by another external body, for example, to obtain research permissions, funding, or to publish results" ( UCL, do I need ethical approval ). A grant condition or a journal policy can create a requirement your own committee would have waived. ## Do I need a NACOSTI research licence in Kenya for a desk review? Assume yes until NACOSTI tells you otherwise. Kenya’s National Commission for Science, Technology and Innovation states that "all persons intending to undertake research in Kenya are required to apply for a Research Licence", and that "there are no exemptions from the NACOSTI Research Licence requirement for persons intending to undertake research in Kenya" ( NACOSTI FAQs ). Students are named in scope, as are Kenyan citizens, independent researchers and consultants. What that page does not do is say whether a literature-only study counts as "undertaking research in Kenya", and I am not going to guess on your behalf. Two things are worth knowing before you ask. Licensing and institutional registration are separate processes at NACOSTI, so your university being registered does not cover you. And licence payments run through the eCitizen gateway, with no fee figure published on the FAQ page as of August 2026, so budget from the portal rather than from any number you read on a blog. ## What do I write in my methods section if approval was not required? Write one explicit sentence saying so, name the reason, and give a reference number if you were issued one. Something close to: "This study is a review of published literature and did not involve human participants or the collection of new data. In line with [institution]’s research ethics policy, ethical clearance was not required." Silence reads as an omission to an examiner, and an examiner who cannot tell whether you skipped approval or were exempted from it will ask. Get the reference number if your institution offers one, even when the answer is no. The University of Cape Town’s Faculty of Commerce exempts secondary-data research from ethical clearance and still encourages researchers to apply anyway, in order "to receive certification and a reference number, in case funders, publishers, or any other legitimately interested party requires this" ( UCT Commerce, ethics in research ). That is five minutes of admin now against a journal query in eighteen months. If you are still drafting the surrounding chapter, how to write a methodology section covers where an ethics statement usually sits. ## How do I find my own institution’s rule quickly? Search your university domain for the phrase, not the topic. A query along the lines of "do I need ethical approval site:youruniversity.ac.za" reaches the screening page faster than the research office homepage does, because that page is almost always titled as a question. UCL’s page is literally called "Do I need ethical approval?" ( UCL ). Then check three things on the page you land on. Whether it names literature reviews or secondary data explicitly. Whether a pre-screening form has to be filed even for exempt work, which the University of Cape Town’s Faculty of Commerce calls the PSQ ( UCT Commerce ). And which committee covers your faculty, since large universities run several rather than one central body, as the University of the Witwatersrand does ( Wits, research ethics ). If the page does not name your situation, email the committee and keep the reply. An emailed "not required" from the committee secretary is the record you want in your appendix. ## Ask Your Own Papers Ethics clearance is the paperwork around the review. The review itself is still forty papers you have to read, hold in your head at once and turn into an argument. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. You add the PDFs you chose and ask where they agree and where they disagree, and each claim in the answer opens the passage it came from. The argument, and the writing, stay yours. Below is a format illustration, not a real Litrevu output and not a real study. It shows the shape of a cited answer to “where do my papers disagree on ethical review?”, with author and year left as tokens. Where do my papers disagree on ethical review? Institutional policy on secondary research diverges along the question of who makes the screening decision (Author, Year). One position holds that reviews of published material fall outside the remit of ethical review unless raw participant data is analysed (Author, Year). A second position requires that every project be submitted for consideration regardless of design, on the grounds that the exemption decision itself belongs to the committee (Author, Year). Both positions are defended on transparency grounds, which suggests the disagreement is procedural rather than substantive (Author, Year). Sources: uploaded_paper_1.pdf p.4, uploaded_paper_2.pdf p.11, uploaded_paper_3.pdf p.2 If that is the stage you are stuck at, Litrevu is free to start, with no credit card, so you can see what it finds in your own papers. Ask your own papers ## Frequently asked questions ## Does a literature review count as research involving human participants? No, not on its own. Reading and analysing published papers does not involve participants, which is why UCL lists use of information available in the public domain as minimal risk activity that does not require ethical review. The picture changes if you analyse participant-level data attached to those papers, or study identifiable posts by real people. ## My supervisor says I do not need ethics approval. Is that enough? It depends on where you study, and at some institutions it is explicitly not enough. UNISA’s guidance states that "it is not for the candidate to decide whether his/her research requires ethical clearance", which puts the decision with the committee. Ask your supervisor to point you at the policy page rather than relying on the verbal answer, and keep whatever the page says. ## Do I need ethics approval for a systematic review? At most universities, no. St Andrews names systematic reviews and meta-analyses alongside literature reviews as not requiring ethical review, subject to its two exceptions around raw data and ethical issues. A systematic review is more work than a narrative one but it is not a different category for ethics purposes, which is worth remembering while you are choosing between a scoping, systematic and narrative review . ## What if I only realise halfway through that I need clearance? Stop and apply, and say so honestly in the application. Most policies require clearance before research commences, which means retrospective applications are awkward but survivable, whereas an undeclared one discovered at examination is not. Your search and screening records help here, so keep your search strategy and PRISMA flow numbers dated as you go. ## Does using an AI tool in my review need separate ethics approval? Ethics approval and AI-use disclosure are different processes, and an exemption from one says nothing about the other. Ethics review covers risk to people and data; AI disclosure covers how you produced the work, and is usually governed by your assessment or academic integrity policy instead. Check both pages, and keep a record of what you wrote and when . ## Related Guides - UNISA Dissertation Literature Review: A Distance-Student Guide - Literature Review vs Systematic Review: What’s the Difference? - How to Write a Methodology Section (Complete Guide with Examples) - How to Write a Research Proposal (Template + Examples) --- # Elicit Alternatives for Literature Reviews: 5 Tools Compared (2026) URL: https://litrevu.com/blog/elicit-alternatives-literature-review Category: AI & Research Writing Published: 2026-08-17 Summary: Elicit finds and screens papers, and its own documentation says the output is tables and structured comparisons, not prose. What Consensus, Scite, Research Rabbit and Litrevu each cover instead, from someone who builds one of them. AI & Research Writing ## Elicit Alternatives for Literature Reviews: 5 Tools Compared (2026) By Samuel de Bruyn · 17 August 2026 · 10 min read I build one of the five tools below, so read this with that in mind. I have tried to write the version I would have wanted when I was the one comparing them. The best Elicit alternative for a literature review depends on which half of the job you are stuck on. Elicit is strongest at the first half, finding and screening papers, and Elicit says plainly in its own help centre that what it produces is reports, tables, summaries and structured comparisons rather than traditional prose literature reviews. That leaves the second half of the work, understanding and writing from the papers you kept, open. As of August 2026, the alternatives worth knowing are Consensus for answering one empirical question quickly, Scite for checking whether a study has been supported or contradicted since publication, Research Rabbit for mapping the citation neighbourhood around a paper, and Litrevu for asking questions of the papers you have already chosen, comparing them and checking your own writing against them. Elicit finds. Litrevu helps you read what you found. The other three sit in between. Two notes on how this comparison is written, because both change what you should trust in it. The first is the obvious conflict: I co-founded Litrevu, which is the last tool on the list, so every section below concedes what the competing tool does better and I have tried to make those concessions the specific, checkable kind. The second is that this post quotes no competitor prices at all. Plans in this category get revised every few months and price-comparison posts rot faster than anything else on a blog, so a figure you read here would be a worse source than the vendor’s own pricing page. Where cost differs in a durable way, which is a monthly subscription against a one-time purchase, that difference is named. Every capability claim comes from the tool maker’s own documentation, checked in August 2026. ## What Counts as an Elicit Alternative for a Literature Review? An Elicit alternative is any tool that covers at least one of the jobs Elicit bundles, or covers the job Elicit deliberately leaves alone. Elicit bundles discovery across a corpus its help centre puts at more than 138 million papers, screening against inclusion criteria, structured data extraction into tables, and question answering over papers you supply. No single product replaces all of that at once, so "alternative" here cannot mean a drop-in substitute. It means a tool that does one of those jobs as well as Elicit does, or a tool that does the thing Elicit says it does not do. One correction before the comparison, because it shapes every choice on this list. Elicit accepts your own PDFs, through Chat with Papers, Extract Data and its Research Agent, each with its own limit. Working from papers you uploaded yourself is therefore not a point of difference between Elicit and a smaller tool, whatever the smaller tool’s marketing says, and I include my own product in that. The genuine difference sits in what comes out the other end. ## What Does Elicit Do Best, and Where Does Elicit Stop? Elicit is best at the front of a review, where the problem is a pile of unread abstracts and a set of inclusion criteria. Elicit’s help centre describes a discovery corpus of more than 138 million papers and a systematic review workflow that screens up to 5,000 papers on the Pro plan and up to 20,000 on Scale. Nothing else in this comparison attempts screening at that scale, and Litrevu’s only discovery is an open-access lookup when you add sources. Elicit also extracts structured columns from a set of papers, capped by its documentation at 50 papers per extraction table, which is a genuinely different capability from summarising them one at a time. If your bottleneck is deciding which papers are in and which are out, Elicit is the answer and the rest of this post is background reading. Where Elicit stops is the prose, and Elicit is refreshingly direct about it: its help centre states that Elicit produces reports, tables, summaries and structured comparisons, not traditional prose literature reviews. That is a design choice rather than a defect, because screening at scale and drafting a chapter are different products. It does mean that an Elicit session ends with an evidence table and a folder of decisions, and the argument still has to be written by someone, and that someone is you. Turning rows into a paragraph that says something is exactly where the common literature review mistakes appear, most often the one where a chapter becomes a list of summaries with nothing connecting them. ## Which Elicit Alternative Answers a Single Research Question Fastest? Consensus answers a single, well-formed research question fastest, which makes Consensus the tool for the stage before you commit to a review at all. Consensus describes itself as an AI-powered academic search engine rather than a chatbot, working over a corpus its documentation puts at more than 200 million peer-reviewed papers aggregated from sources including Semantic Scholar and OpenAlex. Ask whether a specific intervention improves a specific outcome and Consensus retrieves the relevant studies, synthesises what they found, and links each point back to the paper it came from. Its Consensus Meter goes one step further and shows what proportion of the retrieved studies support or contradict a yes or no claim, which is a reading Elicit does not give you. Consensus is built around a question rather than a corpus, so Consensus is the wrong tool for screening several hundred papers against criteria and the wrong tool for writing a chapter. Use Consensus while you are still testing whether a research question has an evidence base worth reviewing, and move on once you know that it does. Pricing is a subscription with a free tier, which is generally enough for the scoping stage of one project. ## Which Elicit Alternative Shows Whether a Paper Has Been Supported or Contradicted? Scite shows whether later work supports or contradicts a paper, through a feature Scite calls Smart Citations. Instead of counting how many times a study was cited, Scite classifies each citing statement as supporting, contrasting or mentioning, using a model its documentation describes as running over more than 1.6 billion citation statements, and Scite shows you the citing sentence together with the section it appeared in. The approach has itself been described in a peer-reviewed paper in Quantitative Science Studies, which is a rarer claim in this category than it should be. Learning that a result has forty contrasting citations is a different fact from learning it has four hundred citations, and only one of those two facts tells you whether to build on it. Scite neither finds papers for you nor writes anything, so Scite replaces no part of Elicit and no part of Litrevu. What Scite covers is the gap both leave: whether the studies carrying your argument have survived contact with the field. Litrevu has no view on whether a source you uploaded is contested, which is a real hole in my own product and the reason Scite belongs in a serious review even though Scite does none of the other four jobs on this list. ## Which Elicit Alternative Maps How Papers Connect to Each Other? Research Rabbit maps how papers connect to each other, drawing the citation graph as a visual network of related works, authors and topics. You start from one paper you already trust, and Research Rabbit expands outward from it, which surfaces adjacent research a keyword search misses because that research uses different vocabulary for the same idea. Elicit searches by query; Research Rabbit searches by relationship, and for the specific problem of "what am I not seeing" the second approach finds things the first cannot. Research Rabbit is a discovery and visualisation tool and nothing more: Research Rabbit does not screen against inclusion criteria, does not extract structured data, and does not draft prose. Open it early, before you know the shape of a field, and again near the end as a check that no cluster of relevant work went missing. Expect to read the papers yourself and to record your include and exclude decisions somewhere else. ## Which Elicit Alternative Helps Me Work Through Papers I Have Already Chosen? Litrevu works through the papers you have already chosen with you, as a whole library rather than a handful at a time. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The honest statement of the difference is narrow and worth stating precisely: it is not that Litrevu works from your uploads and Elicit does not, because Elicit takes uploads too, and Elicit’s Chat with Papers also answers questions about papers you supply. It is that Elicit’s chat works on a few papers at a time (four on Basic, eight on paid plans, per its help centre) and its output is reports and tables, while Litrevu searches every paper in your library when it answers, opens each citation to its passage, and checks your own paragraphs against your sources. Here is the shape of what comes back, using placeholders rather than invented sources. Ask three papers on teacher burnout what drives it, and the answer looks like this: Recent work links teacher burnout to workload intensity rather than class size alone. (Author A, Year) reported that emotional exhaustion rose with administrative load in a secondary school sample, while (Author B, Year) found the same pattern held in under resourced schools but was moderated by peer support. (Author C, Year) offers a partial counterpoint, arguing that autonomy rather than workload is the stronger predictor. Those placeholders are deliberate. Filling them with three plausible names and years would be a fabricated citation in a post arguing that fabricated citations are the thing to watch for, so the shape is illustrated and the sources are left blank. In a real answer each marker carries the author and year from one of the PDFs you uploaded, in whichever citation style you chose, and opens the passage it came from, so you can check the sentence against the paragraph behind it. What Litrevu does not do is the entire first half of this post. Litrevu has no discovery corpus (its only search is an open-access lookup when you add sources), runs no screening workflow, and offers no citation-context analysis, so Litrevu assumes you have already searched somewhere else and made your own include and exclude calls. The integrity of your review rests on you: checking each citation against its source and writing the text yourself. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. If you want the longer version of that argument, our guide on whether AI can write a literature review sets out where the line sits. Starting is free with no credit card, and Litrevu is a one-time purchase rather than a monthly subscription, which is the one cost difference in this comparison that will not go stale. ## Elicit Alternatives Compared (August 2026) The five tools set against the job each one does best, what each works from, and where each beats Litrevu. Read the table as a sequence rather than a ranking: these products hand off to each other, and a realistic postgraduate workflow uses Research Rabbit or Elicit to find, Elicit to screen, Scite to pressure test the studies carrying the argument, Consensus to check a single question, and Litrevu to read, compare and check whatever survived. Comparison of Litrevu, Elicit, Consensus, Scite and Research Rabbit by what each is best for, what it works from, what it outputs, and where each beats Litrevu. Tool Best for Works from What you get Where it beats Litrevu Litrevu Understanding, comparing and checking the papers you have already chosen PDFs you add, plus open-access papers you pick from an OpenAlex search Answers that cite the passage they came from, side-by-side comparison tables, and a check of your own writing against your papers Only a basic open-access search, no screening at scale, no view on whether a source is contested Elicit Finding papers and extracting structured data from them 138M paper corpus, and PDFs you upload Reports, tables, summaries and structured comparisons Far larger discovery corpus, systematic review screening into the thousands, purpose-built data extraction tables Consensus Answering an empirical yes or no question across the literature 200M+ peer-reviewed papers Synthesised answer with a meter showing how much of the literature agrees Answers questions across all published work in seconds; nothing in Litrevu does this Scite Checking whether a paper has been supported or contradicted since 1.6B+ classified citation statements Citation contexts labelled supporting, contrasting or mentioning Tells you if a source is contested. Litrevu has no view on this at all Research Rabbit Exploring outward from one paper to find related work Citation graph Visual networks of related papers, authors and topics Visual citation-graph discovery; Litrevu offers nothing comparable The honest split: if you do not yet have your papers, Elicit, Consensus and Research Rabbit will get you there faster than Litrevu can. Litrevu's only discovery is an open-access search (OpenAlex) when you add sources, where you pick which papers to add; it cites only the papers in your library and does not search the web for citations. If you want to know whether a study you already cite has since been contradicted, Scite answers that and Litrevu does not. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Elicit also works from uploaded PDFs, so the real difference there is the shape of the work: Elicit produces reports, tables and structured comparisons, with a purpose-built extraction workflow, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Its comparison tables are built in chat for a handful of papers and are not an extraction workflow. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Comparison verified as of August 2026 against each vendor's own documentation. These products change quickly, so check the current feature list before deciding. ## Do These Tools Invent Citations, and How Would I Know? Fabricated references have gone from an anecdote to a measured problem in the published record, which is the strongest argument for choosing tools by how checkable they are. An audit led by Maxim Topaz of Columbia University’s Data Science Institute, published as a letter to The Lancet on 7 May 2026, examined close to 2.5 million biomedical papers and found that roughly one in 277 papers from the first seven weeks of 2026 cited a reference that does not exist. The comparable rate was one in 458 across 2025 and one in 2,828 in 2023, a twelve fold rise in two years, with the sharpest increase arriving in mid 2024. Those are papers that made it through peer review and into a database. None of that is an accusation against the five tools here, and it should not be read as one. The measured failure belongs to general-purpose chatbots generating references from nothing, and each of these five is built the other way round: Elicit, Consensus, Scite and Research Rabbit tie their output to a paper in a real index, and Litrevu ties each citation to a passage in a PDF you chose. Traceability is the property to insist on, and the test is simple enough to run in a minute. Click through to a source and see whether the sentence survives contact with the paragraph it came from, and once a real source is in your draft, make sure it is cited correctly as well as honestly. ## What Do These Tools Cost a Postgraduate Student? Cost in this category comes in two shapes, and the shape matters more than any figure I could print here. Elicit, Consensus and Scite are monthly subscriptions with free or trial access to start, so the real cost is the subscription multiplied by the months your project runs, which for a thesis is usually longer than anyone budgets for. Research Rabbit has been free to use since launch. Litrevu is bought once rather than billed monthly, and is free to start with no credit card. Every one of those plans is revised more often than a blog post is updated, so treat each vendor’s own pricing page as the only source worth trusting on the day you buy. If you can pay for exactly one tool, buy against your bottleneck rather than against the sticker. A student sitting on four hundred unread abstracts gets more from a screening workflow than from a cheaper tool that does not screen, and a student who has already chosen their papers and cannot start writing gets nothing at all from a better search engine. It also helps to know the size of the job before you spend anything, and the expected word count at your level is a decent proxy for how many weeks the writing stage will take. ## Frequently Asked Questions ## Is there a free Elicit alternative? Yes, several, though none of them is a free version of everything Elicit does. Consensus runs a free tier alongside its paid plans, Research Rabbit has been free to use since launch, and Litrevu is free to start, with no credit card. Elicit itself has a free tier too, with the large screening runs sitting on the paid plans. Free tiers in this category change often, so check the current limits on each tool’s own pricing page rather than trusting a number in a blog post. ## What is the best Elicit alternative for writing rather than searching? If the job is the writing, the tool should help you understand your sources rather than write for you. Litrevu is built for that step: you add the papers you have chosen, ask what they say, compare them side by side and check your own paragraphs against them, with each citation opening the passage it came from. Elicit’s own documentation describes its output as reports, tables, summaries and structured comparisons, so the two tools are aimed at different halves of the job. Many universities do not allow AI-written text in submitted work, even after you edit it, so the writing itself stays yours. ## Do any of these tools guarantee they will not make up references? No tool should promise that, and a tool that does is telling you something about its marketing rather than its engineering. The safeguard that actually works is traceability: every claim tied to a source you can open and read. Elicit, Consensus, Scite and Research Rabbit each tie their output back to an indexed paper, and Litrevu ties each citation to a passage in a PDF you uploaded. Whichever you use, open the source and confirm it says what the tool claims. ## Is Elicit or Consensus better for a systematic review? Elicit is better for the screening stage of a systematic review, because Elicit runs a dedicated screening workflow that its help centre describes as handling up to 5,000 papers on the Pro plan and up to 20,000 on Scale. Consensus is built to answer one empirical question across the published literature rather than to screen a defined corpus against inclusion criteria. A common sequence is to scope the question in Consensus, then screen in Elicit. ## Can I use more than one of these tools together? Yes, and most researchers end up doing exactly that, because these tools hand off to each other rather than compete. A realistic sequence is Research Rabbit or Elicit to find candidate papers, Elicit to screen them against your criteria, Scite to check whether the studies carrying your argument have held up, Consensus to sanity check a specific question, and Litrevu to read, compare and check the papers that survived. ## Does Elicit work with my own PDFs, or only with its search index? Elicit works with your own PDFs as well as its search index. Its help centre documents uploading your own papers through Chat with Papers, Extract Data and the Research Agent, with limits on each, including data extraction capped at 50 papers per table and the research agent accepting up to 20 uploaded resources. This is worth correcting because working from your own uploads is often presented as something only smaller tools do. The real difference between Elicit and a tool built around your own library is the shape of the work, not the source of the input. ## Ask Your Own Papers If Elicit already got you to a screened set of papers, the tool did its job and the folder on your desktop is the proof. The weekend that disappears is the one after that, when you need to know what forty papers say, where they disagree and whether your argument holds. Litrevu reads every paper you add, answers your questions with a citation to the exact passage behind each claim, compares studies side by side and checks your own writing against them. It is free to start, and no credit card is required. Ask your own papers One next action before you open another pricing page: write down the stage you are actually stuck on. Finding, screening, appraising and close reading are four separate purchases, and almost every wasted subscription I hear about was bought for the wrong one. ## Related Guides - Can AI Write a Literature Review? What You Need to Know - How to Cite ChatGPT and AI Sources (APA, MLA, and Harvard) - 10 Common Literature Review Mistakes (and How to Avoid Them) - How Long Should a Literature Review Be? Word Count Guide by Degree --- # Best AI Tools for Literature Review in 2026, Compared URL: https://litrevu.com/blog/best-ai-tools-for-literature-review Category: AI & Research Writing Published: 2026-08-14 Summary: No single AI tool does a whole literature review. See which job Elicit, Scite, Consensus, Research Rabbit and Litrevu each do best, and how each bills. AI & Research Writing ## Best AI Tools for Literature Review in 2026, Compared By Samuel de Bruyn · 14 August 2026 · 12 min read · Updated 6 November 2026 No single AI tool does a whole literature review, so the best AI tool for a literature review is the one built for the job you are stuck on. As of November 2026, Elicit is strongest at finding and screening papers, Scite at showing whether later work supports or contrasts a paper, Consensus at answering a yes or no research question, Research Rabbit at mapping how papers connect, and Litrevu at reading, comparing and checking the papers you have already chosen. Every capability claim below comes from each tool maker’s own pages, read in November 2026. This comparison quotes no prices, because plans in this category change often and a price copied into a blog post is a worse source than the vendor’s pricing page. ## What is an AI literature review tool? An AI literature review tool is software that uses a language model to help with one or more stages of a literature review: finding papers, screening them against criteria, extracting data, checking how a paper has been cited since, or reading and comparing the papers you chose. Most arguments about the best AI literature review tool are really arguments about which of those stages the person asking is stuck on. Two properties separate an AI literature review tool from a general chatbot. An AI literature review tool retrieves from a real index of published work, or from documents you supplied, instead of generating a plausible reference from nothing. An AI literature review tool also shows the source behind each claim, so you can open the source and check it. Software that cannot show you the underlying paper is not doing literature review work, whatever its landing page says. ## Which AI literature review tool does which job? Elicit, Consensus, Scite, Research Rabbit and Litrevu each do a different job, and a realistic postgraduate workflow uses more than one of them. The table below sets out the job each tool does best, what each tool works from, and where each competitor beats Litrevu, as of November 2026. Tool Best for Works from What you get Where it beats Litrevu Elicit Finding papers, screening them and extracting structured data An index of 138 million papers and 545,000 clinical trials, plus PDFs you upload Research reports, extraction tables and CSV exports Far larger discovery index; systematic review screening of up to 5,000 papers (Pro) or 20,000 (Scale); purpose-built data extraction Scite Checking whether a paper has been supported or contrasted since 1.6 billion+ classified citation statements Citing statements labelled supporting, contrasting or mentioning Tells you whether a source is contested; Litrevu has no view on this Consensus Answering a yes or no research question across the literature An index Consensus describes as 400 million+ academic papers An answer from the papers found, with a Consensus Meter of yes, no and possibly for yes or no questions Answers questions across published work you have not collected; Litrevu answers only from your library Research Rabbit Exploring outward from papers you trust to find related work Seed papers you choose and the citation links around them Citation maps, related papers, authors and research trends Visual citation-map discovery; Litrevu offers nothing comparable Litrevu Understanding, comparing and checking papers you have already chosen PDFs, PDF links, DOI or arXiv links and pasted text you add, plus open-access papers you pick Answers that cite the exact passage, side-by-side comparison tables, and a check of your own paragraph against your papers Not applicable. Litrevu’s limits: no screening at scale, no citation-context view, and no answers from papers outside your library The pattern in the table is a hand-off rather than a contest: Research Rabbit or Elicit to find and screen papers, Scite to pressure-test the claims that carry weight, Consensus to sanity-check a question, and Litrevu to read, compare and check the papers that survived. These products change quickly, so confirm the current feature list on each vendor’s site before you decide. ## Which AI tool finds and screens the most papers? Elicit finds and screens the most papers of the five tools compared here, so Elicit is the tool for a pile of unread abstracts. Elicit’s homepage describes search across more than 138 million academic papers and 545,000 clinical trials, and Elicit’s help centre says a systematic review on the Pro plan can hold up to 5,000 papers, on Scale up to 20,000 and on Enterprise up to 40,000. Elicit screens every gathered paper against your criteria and ends with a research report, with results from each step exportable as CSV. Elicit also accepts PDFs you upload, so the belief that Elicit only searches its own index is out of date. Elicit’s output is reports, tables and structured extraction, not a prose literature review in your voice. Treat Elicit as the front door of a review: Elicit decides which papers are in and which are out, and the close reading and writing happen afterwards. For a screening walkthrough, see how to screen 500 abstracts and the best AI tool for a systematic review . ## Which AI tool shows whether a paper has been supported or contrasted? Scite shows whether later research supports or contrasts a paper, through a feature Scite calls Smart Citations. Scite’s features page says its deep learning model “analyzes 1.6B+ citation statements and classifies each one as supporting, contrasting, or mentioning”, and Scite’s search matches on citation statements extracted from the full text of citing papers. The method is described in a peer-reviewed paper, “scite: A smart citation index that displays the context of citations and classifies their intent using deep learning” (Nicholson et al., Quantitative Science Studies, 2021). Instead of learning that a study was cited four hundred times, a Scite user learns how many of those citing statements dispute the finding. That is the difference between a result that held up and one the field has moved past. Before you build an argument on a heavily cited study, reading its contrasting citations in Scite is the most useful single check in this list. Scite is a citation index rather than a screening or reading workspace, so Scite sits between finding papers and writing about them. ## Which AI tool answers a yes or no research question across the literature? Consensus answers a single, well-formed yes or no research question across published papers, which makes Consensus the tool for the scoping stage of a literature review. Consensus describes itself as “an AI academic search engine for peer-reviewed literature”, and its pricing page describes an index of more than 400 million academic papers. For yes or no questions, the Consensus Meter sorts the results into “yes”, “no” and “possibly”, according to Consensus’s own guide to the feature. Consensus is built for a question rather than a corpus, so Consensus is the wrong tool for screening several hundred papers against inclusion criteria. Use Consensus early, while you are testing whether a research question has an evidence base worth reviewing, and move to a screening tool once you know that it does. (Consensus’s older blog posts give a smaller database figure, more than 150 million peer-reviewed papers; this page uses the current pricing page’s figure.) ## Which AI tool maps how papers connect to each other? Research Rabbit maps how papers connect to each other: you start from seed papers you trust, and Research Rabbit finds related papers, authors and emerging topics around them. Research Rabbit’s homepage says it “analyzes papers you love and finds the research you’ve been missing” and lets you “find related papers, build citation maps, and track research trends”. Research Rabbit is useful at the very start of a literature review, before you know the shape of the field, and again near the end, to check that you have not missed a cluster of related work. Research Rabbit’s own pages describe discovery and citation maps, not screening or writing, so expect to read the papers yourself and to log include and exclude decisions somewhere else. For the manual way to follow citations and map a field, see snowballing and citation chaining and how to create a literature map . ## Which AI tool helps me work through my own papers? Litrevu works through the specific papers you have already chosen, which is the stage the discovery tools above leave to you; Elicit, which also reads uploads, is the tool with real overlap. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. According to Litrevu’s how-it-works page, you add papers as uploaded PDFs, PDF links, DOI or arXiv links or pasted text, or let Litrevu find open-access papers on your topic. Litrevu answers only from papers in your library and says so when your papers do not cover a question. Opening a Litrevu citation shows the passage highlighted on the page of the PDF it came from. A Litrevu comparison lines studies up side by side in a cited table, and pasting a paragraph you wrote returns each claim as Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover a claim, not that nobody has studied it. The trade-off is that Litrevu has no screening workflow, so Litrevu does not screen at the scale Elicit does, and has no view on whether a source you uploaded has been contrasted since; Scite answers that. Litrevu can also draft cited text into a document. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your university’s policy and declare how you used Litrevu. Here is the shape of a Litrevu answer to “what do my papers say about remote work and output?”. This is a format illustration with placeholder sources, not real output: Your papers disagree on whether remote work changes output, and the split follows the type of task. One study reports higher performance for staff doing routine, measurable work from home (Author, Year) [1]. Another reports no change in delivered work for collaborative teams (Author, Year) [2]. In Litrevu, each numbered marker opens the passage it came from in one of your PDFs, so you can check every cited claim against its source line by line before you keep it. ## Do AI literature review tools cite real sources, or do they make citations up? AI literature review tools that retrieve from a real index hand you a source you can open, which is a different design from a general chatbot asked to produce references. The gap is measurable for chatbots: Walters and Wilder (Scientific Reports, 2023) examined 636 citations in 84 papers written by ChatGPT and found that 55% of the GPT-3.5 citations and 18% of the GPT-4 citations were fabricated. Of the real citations, 43% from GPT-3.5 and 24% from GPT-4 contained substantive errors. Elicit, Consensus, Scite and Research Rabbit each tie their output to an indexed paper you can open, and Litrevu ties each citation to a passage in a PDF you added yourself. Whichever AI literature review tool you use, the protective habit is the same: open the cited paper and confirm it says what the tool claims, because a citation you have not checked is a citation you cannot defend in a viva. For a full checklist, see how to spot fake AI citations before you submit and can AI write a literature review . ## What does an AI literature review tool cost a postgraduate student? Four of the five tools let a student start free as of November 2026: Elicit (its Basic plan), Consensus (its Free tier), Research Rabbit (its free plan) and Litrevu (free to start, no credit card), while Scite offers a 7-day free trial instead of a free tier. Elicit, Consensus and Research Rabbit bill paid plans monthly or annually, Scite lists its plans as billed yearly, and Litrevu is a pass paid once for a set period that ends on its own, with nothing to renew. For current figures and student discounts, see literature review software prices compared . ## Frequently asked questions ## What is the best free AI tool for a literature review? There is no single best free AI tool for a literature review, because each free tier does a different job. Elicit's Basic plan suits finding and screening papers, Consensus's Free tier suits a yes or no research question, Research Rabbit's free plan suits citation-map discovery, and Litrevu is free to start for working through papers you already have. Pick the free tier that matches the stage you are stuck on. ## How much does AI literature review software cost? AI literature review software usually starts free and then moves to a paid plan. Elicit, Consensus and Research Rabbit sell monthly or annual subscriptions, Scite lists yearly-billed plans, and Litrevu sells a pass paid once for a set period. Current figures for each tool are in literature review software prices compared . ## Can I try AI literature review software before paying? Yes, as of November 2026 every tool in this comparison can be tried before paying. Elicit, Consensus and Research Rabbit each have a free plan, Scite offers a 7-day free trial for new users, and Litrevu is free to start with no credit card. Check each tool's own page for the current free limits before planning a project around them. ## Can I pay for AI literature review software monthly? Elicit, Consensus and Research Rabbit offer monthly or annual billing on their paid plans, and Scite's pricing page lists its plans as billed yearly. Litrevu is not a subscription: a Litrevu purchase is a pass paid once for a set period that ends on its own. Prices for each option are in literature review software prices compared . ## Research Rabbit vs Elicit: which should I use first? Use Research Rabbit first if you have a few papers you trust and want to see what surrounds them, and Elicit first if you have a research question and need to search and screen at scale. Research Rabbit builds citation maps outward from seed papers, while Elicit searches an index of 138 million papers and screens results against your criteria. For a new topic, a sensible order is to explore in Research Rabbit, then screen in Elicit. ## Is Elicit or Consensus better for a systematic review? Elicit is better for a systematic review, because Elicit runs a dedicated systematic review workflow that its help centre says holds up to 5,000 papers on the Pro plan and up to 20,000 on Scale. Consensus is built to answer one research question across the literature, not to screen a large set of papers against inclusion criteria. A common sequence is to scope the question in Consensus and then screen in Elicit. ## Do AI literature review tools make up fake citations? Tools that retrieve from a real index of published papers hand you a source you can open and check, which is a different design from a general chatbot generating a reference. The measured problem sits with chatbots: a 2023 study in Scientific Reports found that 55% of citations produced by GPT-3.5 and 18% produced by GPT-4 were fabricated. Whichever tool you use, open the cited paper and confirm it says what the tool claims. ## Can an AI tool write my whole literature review for me? No, and many universities would not accept it if one did. Many university AI policies allow AI for reading, searching and summarising sources, often with a declaration, but do not allow AI-written text submitted as your own, even after you edit it. Use AI tools to find, read, compare and check your papers, write the review yourself, check your university's policy and declare how you used AI. ## Ask Your Own Papers Finding papers, screening them and checking whether they have held up are jobs the tools above do well, and they are jobs where your judgement is doing the real work. The stage that comes after is knowing what all those papers say, where they agree, and whether your own claims stand up. If you have already gathered and screened your papers, ask them. Litrevu reads every paper you add, answers your questions with a citation to the exact passage behind each claim, compares studies side by side, and checks your own writing against them. Free to start, no credit card required. Ask your own papers One next action: name the stage you are actually stuck on before you open another pricing page. Discovery, screening, appraisal and close reading are four different purchases. ## Related Guides - Can AI Write a Literature Review? What You Need to Know - How to Turn Your Research Papers into a Literature Review - How to Spot Fake AI Citations Before You Submit - Zotero vs Mendeley vs EndNote: Which Reference Manager Should You Use? --- # How to Update an Existing Literature Review (2026) URL: https://litrevu.com/blog/how-to-update-an-existing-literature-review Category: Literature Review Published: 2026-08-12 Summary: Re-run your original search from the date of your last search, screen only what is new, and fold in the studies that change the argument. The five step method, the retraction check most people skip, and when to start over instead. Literature Review ## How to Update an Existing Literature Review (2026) By Jessica McLaren · 12 August 2026 · 8 min read The file is called lit-review-final-v3 and it was last saved fourteen months ago. Everything in it was true when you wrote it. The question now is which parts are still true, and that is a smaller question than it feels like at midnight before a resubmission. To update an existing literature review, re-run your original search with a date filter starting from the date of your last search, screen only the new results against the same criteria, and fold in the studies that change the argument rather than every paper that appeared. Then note what has shifted since the first version, new findings, a changed consensus, any retractions, and what has stayed the same, and revise your synthesis and your research gap to match. You are revising an argument, not rebuilding it from scratch. Updating is a task almost everyone overestimates. It looks like starting again, and the honest job is usually a bounded top-up: a fresh search since one recorded date, a short screen, and a handful of paragraphs rewritten. This guide covers when a review is actually due a refresh, the five steps that keep the work bounded, how to decide which new papers earn space, and the checks that have nothing to do with new studies at all. ## When Does a Literature Review Need Updating? A literature review needs updating whenever enough time or enough new evidence has passed that its claims might no longer hold. In practice there are four clear triggers: you are resubmitting after a revise and resubmit, your thesis chapter was written more than a year before the submission date, your field moves quickly enough that a year changes the picture, or you are heading into a viva where an examiner will have read the latest work. The rough threshold most supervisors work to is that a review older than about twelve to eighteen months is due a refresh before it is submitted or defended, and a review in a fast moving area can be stale in months. As of August 2026 that pace is worth taking seriously in any field touched by AI tools, where a year can outdate a review’s framing rather than just add a few citations. This is the logic behind the living systematic review, a format that is updated continuously as new evidence arrives rather than frozen at the moment of publication. You are not committing to that level of upkeep. The principle is what transfers: a review has a shelf life, and submitting one past its date is a predictable way to be caught out by a question you could have answered yourself a fortnight earlier. ## How Do I Update a Literature Review Step by Step? Update a literature review in five bounded steps that reuse your original method rather than replacing it. Each step exists to keep the new work comparable to the old, which is what makes an update defensible rather than a second review stapled to a first. 1. Find your last search date. This single date is the boundary for everything that follows. If you recorded it in a search log, it is there. If you did not, reconstruct it from the newest paper you cited or the file date on the draft, and write the reconstructed date down as an estimate so the method stays honest. 2. Re-run the original searches with a date filter. Same databases, same terms, restricted to that date forward. The filter is the whole trick: it turns an unbounded task into a results list you can see the end of, usually a fraction of the original. 3. Screen the new results against your original criteria. Use the inclusion and exclusion criteria you already wrote, not new ones you feel like applying today. Consistency here is what lets you describe one method for the whole review instead of two. 4. Read and appraise what passes. Judge the survivors exactly as you judged the originals, at the same standard. A paper does not earn a lighter appraisal for being recent. 5. Integrate what changes the argument. Work the qualifying studies into your existing synthesis, then revisit your gap statement and conclusions. This is the step people skip, and skipping it is what turns an update into a longer reference list with the same old argument on top. The discipline that keeps all of this bounded is leaving your search terms, databases, and inclusion criteria unchanged. If you quietly reword the search while updating, you are no longer updating the same review, you are running a different one, and the two halves stop being comparable. Record the new search date and terms next to the old ones. The record does the remembering so that when someone asks how current the review is, the answer is a date rather than a guess. ## How Do I Decide Which New Papers to Add? Add a new paper only if it is relevant to your research question and it changes something: the strength of the evidence, the balance of the debate, or the gap you claim. A paper that merely repeats what three sources already establish can be cited alongside them in a single sentence, but it does not need its own discussion. Updating is not padding, and a review that swells by thirty citations without a single revised sentence has been added to rather than updated. Ask two questions of every new study. Does it agree with, extend or contradict what the review already says? And does that shift the argument enough to rewrite a sentence? If the answer to the second question is no, cite it briefly and move on. If a new study contradicts your previous conclusion or fills the gap you identified, that is the paper that earns real space, because it changes what your review is telling the reader. ## What Should I Check Besides New Studies? Beyond new studies, check four things: retractions among the sources you already cite, a consensus that may have moved without any single decisive study, guidelines or standards that have been superseded, and whether your own framing still fits the field. New papers are only half of what a year changes. Checking your existing citations for retractions is the step most people skip, and it is the one an examiner is most likely to catch. A paper can be withdrawn or corrected quietly long after you first cited it, which is exactly why retraction tracking databases exist. Run your key citations through one, give the ten or fifteen sources your argument actually rests on the most attention, and note the date you checked. Consensus drift is subtler and worth a deliberate look. Read the introduction sections of two or three of the newest papers in your area and see how they characterise the state of the debate. If they describe a settled question you presented as open, or an open question you presented as settled, your framing is what needs the edit, not your citation list. ## Should I Update My Review or Start Over? Update rather than start over whenever your original research question and search method still fit your project, which is the usual case. Starting over only makes sense when the question itself has changed, when the original search was too narrow or too flawed to build on, or when the field has been reshaped so completely that the old framing no longer makes sense. For a thesis chapter written a year ago, updating is almost always the right and far cheaper call. Situation Update Start over Research question Unchanged, or narrowed slightly Genuinely different question now Original search Documented and defensible Undocumented, or one database and a hope Time since last search Months, or one to two years Several years in a fast moving field What the new evidence does Extends, qualifies or contradicts specific claims Makes the whole framing obsolete Realistic effort Days: one search, one screen, a rewrite of a few sections Weeks: the full method again from scratch The deciding factor is whether the original method is one you can honestly extend. If you can re-run the same search with a new date and it still makes sense, update. If you would be embarrassed to describe the original search to an examiner, that is a sign to rebuild rather than patch, and better to know it now than in the viva. ## Can an AI Tool Help Me Update a Literature Review? An AI tool helps most once you have found and appraised the new studies yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. For an update that means you add the new papers that passed your screen and ask what they change: which earlier findings they support, which they challenge, and where. You can also paste a paragraph you wrote for the original review and see which of its claims your papers still back. To illustrate the format, here is the shape an update paragraph takes when it positions new evidence against a review’s earlier conclusion: New evidence since last search, theme: remote work and productivity. Two 2025 studies report productivity gains that hold after controlling for self-selection [Source: Ferreira2025.pdf, p.8] [Source: Yang2025.pdf, p.12], which tempers the earlier conclusion in this review that the gains were mostly a selection effect, so the gap statement shifts from whether the effect is real to how much of it survives outside knowledge work. The point of the example is the shape, not the content. Notice that it names what the new studies do to the previous conclusion rather than just summarising them, which is the whole job of an update. When you write your own, keep every claim pinned to a file and a page so you can open the source and check it before it changes what your review argues. ## Frequently Asked Questions ## How often should a literature review be updated? A literature review should be refreshed before submission if it is more than about twelve to eighteen months old, and sooner in a fast-moving field. There is no fixed rule, because the right interval depends on how quickly your area produces new evidence. The practical test is whether new work could have changed your conclusions since your last search. ## Do I need to redo my whole search to update a review? No, you re-run your original search with a date filter starting from your last search date, so you only see what is new. Redoing the entire search from scratch wastes effort and risks introducing inconsistencies. Reusing the same databases, terms, and inclusion criteria is what keeps the updated review comparable to the original. ## What if new research contradicts my existing literature review? New research that contradicts your review is the most valuable kind to find, and you address it directly rather than hiding it. Add the contradicting studies, explain how they challenge your earlier conclusion, and revise that conclusion or your gap statement accordingly. A review that engages with disconfirming evidence is stronger and more credible than one that only cites agreement. ## Should I check my old citations when updating? Yes, check your key existing citations for retractions, corrections, or superseded versions, because sources can change status long after you first cited them. A retracted paper still sitting in your review is a common and avoidable weakness. Checking each important citation against a retraction database takes little time and protects the claims that rest on it. ## Is updating a literature review easier than writing one from scratch? Usually yes, because you reuse your original question, search method, and structure, and only process what is new. The work is bounded to a fresh search since your last date, a short screen, and revising the paragraphs the new evidence touches. It only becomes as much work as starting over when your research question itself has changed. ## How Litrevu Compares to Other Research Tools These tools mostly solve different problems. Three of the four below help you find and evaluate papers. Litrevu starts after that, when you have the papers and need to understand them: it answers questions about your papers, compares them and checks your own writing against them. Elicit is the one with real overlap. Comparison of Litrevu, Elicit, Consensus, Scite and Research Rabbit by what each is best for, what it works from, what it outputs, and where each beats Litrevu. Tool Best for Works from What you get Where it beats Litrevu Litrevu Understanding, comparing and checking the papers you have already chosen PDFs you add, plus open-access papers you pick from an OpenAlex search Answers that cite the passage they came from, side-by-side comparison tables, and a check of your own writing against your papers Only a basic open-access search, no screening at scale, no view on whether a source is contested Elicit Finding papers and extracting structured data from them 138M paper corpus, and PDFs you upload Reports, tables, summaries and structured comparisons Far larger discovery corpus, systematic review screening into the thousands, purpose-built data extraction tables Consensus Answering an empirical yes or no question across the literature 200M+ peer-reviewed papers Synthesised answer with a meter showing how much of the literature agrees Answers questions across all published work in seconds; nothing in Litrevu does this Scite Checking whether a paper has been supported or contradicted since 1.6B+ classified citation statements Citation contexts labelled supporting, contrasting or mentioning Tells you if a source is contested. Litrevu has no view on this at all Research Rabbit Exploring outward from one paper to find related work Citation graph Visual networks of related papers, authors and topics Visual citation-graph discovery; Litrevu offers nothing comparable The honest split: if you do not yet have your papers, Elicit, Consensus and Research Rabbit will get you there faster than Litrevu can. Litrevu's only discovery is an open-access search (OpenAlex) when you add sources, where you pick which papers to add; it cites only the papers in your library and does not search the web for citations. If you want to know whether a study you already cite has since been contradicted, Scite answers that and Litrevu does not. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Elicit also works from uploaded PDFs, so the real difference there is the shape of the work: Elicit produces reports, tables and structured comparisons, with a purpose-built extraction workflow, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Its comparison tables are built in chat for a handful of papers and are not an extraction workflow. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Comparison verified as of August 2026 against each vendor's own documentation. These products change quickly, so check the current feature list before deciding. ## Ask Your Own Papers Updating is bounded work: a fresh search from your last date, a short screen, and a rewrite of the paragraphs the new evidence actually touches. Deciding which of those papers changes your argument is your judgement and nothing should take it from you. Reading the new papers closely enough to know is the part that eats a weekend. Once you have the new papers that passed your screen, add them to Litrevu and ask what they change. It compares them with the studies you already cited, side by side, and every answer links to the passage it came from, so you can check each point before you revise the paragraphs it touches. Litrevu is free to start, and no credit card is required. Try Litrevu free One next action: open the review and find the date of your last search. Write it at the top of the file. Everything else in an update hangs off that one number, and finding it takes five minutes. ## Related Guides - How to Write a Literature Review - How to Check If a Paper Has Been Retracted - How to Organize Research Sources for a Literature Review - 10 Common Literature Review Mistakes (and How to Avoid Them) --- # What Is Grey Literature? Where to Find It and How to Cite It URL: https://litrevu.com/blog/how-to-use-grey-literature-literature-review Category: Literature Review Published: 2026-08-11 Summary: What grey literature is, a table of where to find each type for free, the AACODS checklist to judge it, and how to cite reports, theses and preprints. Literature Review ## What Is Grey Literature? Where to Find It and How to Cite It By Jessica McLaren · 11 August 2026 · 13 min read · Updated 10 November 2026 Grey literature is research produced outside commercial journal and book publishing: government and NGO reports, theses and dissertations, working papers, conference papers, preprints, trial registrations and policy documents. Include it in a literature review whenever missing unpublished or very recent evidence could bias your answer, which is why the Cochrane Handbook asks systematic reviewers to search dissertations, conference abstracts and trial registers as well as journals. Grey literature (spelled gray literature in US English) is “information produced on all levels of government, academics, business and industry in electronic and print formats not controlled by commercial publishing”, where publishing is not the main activity of the body that produced it. This is the Luxembourg definition of 1997, expanded in New York in 2004, as quoted by Monash University Library . ## What counts as grey literature? Grey literature covers seven main document types: government and agency reports, theses and dissertations, NGO and charity reports, preprints, conference papers, working and white papers, and policy or clinical guidance. Monash University Library’s grey literature guide also lists patents, newsletters, and clinical trials and practice guidelines, and notes that grey literature may include statistics and data sets. What every type shares is that no commercial publisher controls it, and most of it has not been peer reviewed. The main types of grey literature and what each adds to a review Type What it is What it is good for in a review Government and agency reports Statistics, evaluations and commissioned research from a department or public body Current national figures and real programme results, often before any journal version Theses and dissertations Completed postgraduate research deposited with the awarding university Full method detail, the null results a short article had to cut, and a ready-made bibliography on your topic NGO and charity reports Evaluations and field research from organisations running programmes How an intervention behaved in practice rather than under trial conditions Preprints Manuscripts posted publicly before peer review The newest work in fast-moving fields; treat every finding as provisional Conference papers and proceedings Work presented at an academic conference Emerging findings and methods; in computing and engineering often the main venue Working papers and white papers Papers circulated by research institutes, think tanks or industry Early economic and policy analysis; check who funded it Policy and clinical guidance Standards and guidelines from a public body or professional association What practice is supposed to look like, often the benchmark a review measures against ## Why should a literature review include grey literature? A literature review should include grey literature because a review built only from journal articles inherits publication bias: studies with null or unwelcome results are less likely to be published. Robert Rosenthal gave this its usual name in a 1979 paper, “The file drawer problem and tolerance for null results” ( Psychological Bulletin, 86(3), 638 to 641 ): the null results stay in the researchers’ file drawers. A journals-only review can therefore overstate how strong or settled an effect is. The Cochrane Handbook for Systematic Reviews of Interventions (version 6.5.1, Chapter 4, last updated March 2025) makes the same point as a rule. Its MECIR standard C28 says “Searches for studies should be as extensive as possible in order to reduce the risk of publication bias”, and names “reports, dissertations, theses and conference abstracts” as sources to search. Section 4.3.2 adds that “Even when studies are completed or terminated, some are never published.” Grey literature also adds recency. A government report can carry this year’s figures while the journal version is still in review, and a preprint can appear months before publication. A narrative review with a deliberately narrow scope can limit itself to peer-reviewed work, but the review should say so in its method and explain why. State the decision either way in your inclusion and exclusion criteria , naming the grey literature types you include. ## Where can I find grey literature for free? Free grey literature is found in four kinds of place: thesis portals, preprint servers, trial registers, and the open repositories of the organisations that produce reports. No single database covers all grey literature, so a thorough search combines several of the sources below. Every entry was checked in November 2026. Where to search for each type of grey literature, free Type Where to search for free What it holds (as of November 2026) Theses, worldwide OATD (Open Access Theses and Dissertations) Open-access theses and dissertations from universities and research institutions around the world Theses, UK EThOS (British Library) Records for over 650,000 UK doctoral theses, over 400,000 of them openly available to download from the university repositories EThOS links to; back on a new platform after the 2023 cyber-attack, no login needed Theses, your own university Your university’s institutional repository Theses, working papers and data sets deposited by staff and students Preprints, physical and computational sciences arXiv More than 3.2 million articles in physics, mathematics, computer science, quantitative biology, quantitative finance, statistics, electrical engineering and systems science, and economics; arXiv states its materials are not peer reviewed by arXiv Preprints, health sciences medRxiv Health sciences preprints, operated by openRxiv, a non-profit organisation Clinical trials ClinicalTrials.gov and the WHO ICTRP Registered trials, including ones never published; Cochrane recommends searching both separately Health reports WHO IRIS Free access to the World Health Organization’s scientific and technical publications from headquarters, regional and country offices Development and economic reports World Bank Open Knowledge Repository The World Bank’s official open-access repository, with over 40,000 publications Open-access research of every kind CORE Open-access research papers collected from repositories and journals worldwide, “free for everyone, forever” Keep a search log for grey literature the same way you would for a database search: where you searched, the exact terms, the date and how many results you kept. The literature search strategy guide shows the log format, and the free search string builder at the end of this guide turns a research question into database search terms you can reuse on these portals. For journal articles you have not yet found, the free research paper finder returns open-access papers with a checked PDF. ## How do I search government and organisation websites for grey literature? Search government and organisation websites with two Google operators: site: limits results to one domain, and filetype:pdf limits them to PDF documents, the format many reports are published in. Google’s own search help documents both operators. A search such as "community health workers" evaluation site:gov.za filetype:pdf returns only PDF documents on South African government domains. Three habits make an organisation search more thorough: - List the three or four bodies that work on your topic (a ministry, a national statistics office, an international agency, a large NGO) before you search. - Run the same site: search on each body’s domain, then open each body’s own publications page, because some reports are never indexed well. - Record every domain and date in your search log, so a marker can see that your grey literature search was systematic. In a systematic review, grey literature found this way can be reported as its own search route. The PRISMA 2020 flow diagram has a template for reviews that searched “databases, registers and other sources”, and the PRISMA flow diagram guide shows how to fill it in. ## How do I judge whether grey literature is trustworthy? Judge grey literature with the AACODS checklist, a six-criterion appraisal tool written by Jess Tyndall at Flinders University in 2010 specifically for grey literature, because the “was it peer reviewed?” shortcut does not apply. AACODS stands for Authority, Accuracy, Coverage, Objectivity, Date and Significance. The criteria below follow the AACODS checklist as Tyndall published it. The six AACODS criteria for appraising grey literature AACODS criterion The question to ask A reason to drop the source Authority Who is responsible for the content, and what is their affiliation and expertise? No named author or organisation stands behind it Accuracy Does it state its aims and methods, and are its references credible? You cannot tell how the data were collected or how many people were studied Coverage Does it state the limits of its content, such as the population studied? It generalises from one region or group without saying so Objectivity Is the author’s standpoint clear and any bias identified? The producer has a stake in the conclusion and does not say so Date Is there a clear date, and does it cite key current sources? It is undated, or older than your review’s time frame allows Significance Does it add context or evidence your other sources do not? It only repeats what your peer-reviewed sources already say Monash University Library advises that grey literature “should ideally be appraised to the same standards as those used to evaluate any other literature”, and warns that some of the organisations and think tanks publishing reports “have their own political or social agendas.” For a preprint, the free peer review checker at the end of this guide shows whether a DOI points to a preprint or a journal article and whether the paper has been retracted. The critical appraisal guide covers the checklists for peer-reviewed studies. ## How do I cite grey literature in APA and Harvard? Cite grey literature with the same parts as any source, adapted to the document type: the author or producing organisation, the year, the title, a description of the document (report, thesis, preprint) and where to find it. When no person is named on a report, the organisation is the author. The templates below use placeholder fields, not real sources. APA 7 reference templates for grey literature, from APA Style’s own examples Source APA 7 template Source of the rule Government report Group Author. (Year). Title of report (Report No. if any). Parent Agency, if not in the group author name. URL APA Style: report by a government agency Unpublished thesis Author, A. A. (Year). Title of thesis [Unpublished master’s thesis]. Name of University. APA Style: unpublished dissertation or thesis Thesis in a repository Author, A. A. (Year). Title of dissertation [Doctoral dissertation, University Name]. Repository Name. URL APA Style: published dissertation or thesis Preprint Author, A. A. (Year). Title of preprint . Repository Name. DOI or URL APA Style: preprint article APA’s rule for a government report is to give the agency responsible for it as the group author, so the in-text citation is (Group Author, Year). For a preprint, APA advises citing the final published version if one exists, and the preprint only if that is the version you read. The preprint citation guide covers when a preprint belongs in a review at all. Harvard is not one standard, so grey literature formats differ by university. In the University of Leeds’ Leeds Harvard style, a thesis is “Family name, INITIAL(S). Year. Title. Type of qualification, academic institution”, and an online report follows the online e-book format : “[Online]” after the title, then the date accessed in square brackets and “Available from:” followed by the DOI or URL. APA 7’s report and thesis templates above carry no access date. Check your own university’s guide, and see the APA citation format and Harvard referencing guides for the full styles. ## How do I work with grey literature in an AI assistant for writing backed by sources? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Because Litrevu works from the PDFs you add, a government report, a thesis and a journal article sit in the same library, and every answer points to the file and page it came from. Here is the workflow for a grey literature search you have already run and appraised: - Add the sources. Upload the report and thesis PDFs, or paste a PDF link, a DOI or an arXiv link for a preprint. - Ask the same question of every source. For example: “How did each source measure effectiveness?” Litrevu answers with citations only from your papers, and says so when your papers do not cover the question. - Open each citation. Every citation opens to the highlighted passage on the PDF page, so you can check a report’s figure in context before you trust it, and run your own AACODS check. - Compare the sources in a table. Line the report, the thesis and the journal articles up side by side, with citations, to see where they agree and where they measure different things. - Check your paragraph. Paste a paragraph you wrote, and each claim comes back Supported, Partly supported, Contradicted or Not in your papers. - Cite and export. Switch between APA, Harvard and four other styles, export to Word or PDF, and export references to BibTeX or RIS. To illustrate the format only (the file names and pages below are placeholders, not real sources), a synthesis paragraph that mixes grey and peer-reviewed sources looks like this: Theme: effectiveness of the programme. A national programme evaluation reports a fall in missed appointments after rollout [Source: Government_Evaluation.pdf, p. X], which two peer-reviewed trials support in smaller samples [Source: (Author, Year), p. X] [Source: (Author, Year), p. X], though the evaluation and the trials measure effectiveness differently. The judgement in that paragraph, that the evaluation and the trials measure different things, is yours. “Not in your papers” means only that your library does not cover a claim; it is not evidence that the wider literature is silent. Many universities do not allow AI-written text in submitted work, even after editing, so write the paragraph yourself, check your university’s policy and declare how you used AI . ## How does Litrevu compare with other research tools for grey literature? Litrevu reads, compares and checks the grey and peer-reviewed sources you have already found; most other research tools are built to find and evaluate journal papers. Elicit is the tool with the most overlap, because it also works from uploaded documents. The claims below come from each vendor’s own website. What each tool works from, and where it beats Litrevu Tool Best for Works from Where it beats Litrevu Litrevu Reading, comparing and checking the papers and reports you add PDFs you add, plus open-access papers you pick from an OpenAlex search Not applicable Elicit Finding papers, screening and extracting data for systematic reviews Over 138 million papers, plus documents you upload Far larger discovery corpus, automated screening and data extraction, reports and tables Consensus AI search across peer-reviewed research Peer-reviewed papers Searches the published peer-reviewed literature; Litrevu searches only your library Scite Seeing whether later work supported, contrasted or mentioned a paper 1.6 billion+ citation statements Shows whether a source is contested; Litrevu has no view on this Research Rabbit Exploring outward from one paper The related works, authors and topics around a paper you start from Visual citation-map discovery; Litrevu offers nothing comparable If you do not have your sources yet, Elicit, Consensus and Research Rabbit are better than Litrevu at finding journal papers, and none of the five replaces searching thesis portals and organisation websites yourself. Litrevu’s only discovery is an open-access search (OpenAlex) when you add sources. These products change quickly, so check each vendor’s current features before deciding. ## Frequently asked questions ## Is a thesis grey literature? Yes, a thesis or dissertation is grey literature, because a university deposits it rather than a commercial publisher publishing it. Monash University Library lists theses and dissertations as grey literature, and the Cochrane Handbook names theses and dissertations among the sources a systematic review should search. When a thesis is later published as a journal article, cite the version you actually read. ## Are preprints grey literature? Yes, preprints are grey literature, because they are posted on a server such as arXiv or medRxiv before any journal has accepted them. arXiv states that materials on its site "are not peer-reviewed by arXiv." APA Style advises citing the final published version of a preprint if one exists. ## Is grey literature peer reviewed? Grey literature is usually not peer reviewed, which is the main reason it needs its own appraisal. Some grey literature has been reviewed or edited, which is why the AACODS Accuracy criterion asks about it, and a thesis is examined, but neither is the same as journal peer review. Appraise each grey source with the six AACODS criteria (Authority, Accuracy, Coverage, Objectivity, Date, Significance) before you cite it. ## Grey or gray literature: which spelling is correct? Both spellings are correct: "grey literature" is British English and "gray literature" is US English, and both mean research produced outside commercial publishing. Use the spelling that matches the rest of your writing. When searching databases, run both spellings, because indexes and library guides use either one. ## Is grey literature a reliable source? Grey literature can be reliable, but reliability varies far more than with peer-reviewed articles, so you appraise each source individually. A national statistics report from a government agency is often highly reliable, while an industry white paper with a commercial interest needs more caution. Running each source through the AACODS checklist, which covers authority, accuracy, coverage, objectivity, date and significance, is the standard way to decide. ## Should I include grey literature in a literature review? In most cases yes, because leaving grey literature out risks publication bias, the tendency for null or unwelcome results to stay unpublished. The Cochrane Handbook asks systematic reviewers to search reports, dissertations, theses and conference abstracts for this reason. A review with a deliberately narrow scope can limit itself to peer-reviewed work, as long as the method section says so and explains why. ## Where can I find grey literature for free? Free grey literature is found in thesis portals such as OATD and the British Library's EThOS, preprint servers such as arXiv and medRxiv, trial registers such as ClinicalTrials.gov and the WHO ICTRP, and organisation repositories such as WHO IRIS and the World Bank Open Knowledge Repository. For government reports, a Google search with site: and filetype:pdf limits results to one domain's PDF documents. Your own university's repository holds its theses and working papers. ## How do I cite a government report or thesis? In APA 7, cite a government report under the agency responsible for it as the group author, followed by the year, the title in italics, any report number and the URL. Cite an unpublished thesis as Author, A. A. (Year), the title in italics, [Unpublished master's thesis] or [Unpublished doctoral dissertation], and the university. Harvard formats differ by university, and some, such as Leeds Harvard, add an access date for online sources, so check your department's guide. ## Ask Your Own Papers Grey literature widens a review, and it also multiplies the appraisal work, because every report and thesis has to be judged on its own rather than waved through on a journal’s name. That judgement is your work and nothing should take it from you. What Litrevu can help with is the reading around it. Once you have gathered and appraised your sources, peer-reviewed and grey alike, add them to Litrevu and ask what they say. It compares a report, a thesis and a trial side by side on the same questions, and every answer links to the file and passage it came from. It is free to start and no credit card is required, so you can see how it handles a mixed set of sources before you commit to anything. Try Litrevu free One next action: pick the single organisation most likely to have published on your topic, open its publications page, and give it twenty minutes. If you come away with one report worth keeping, run it through the six AACODS questions before it goes anywhere near your draft. ## Related Guides - How to Write a Search Strategy for a Literature Review - How to Write Inclusion and Exclusion Criteria (With Examples) - How to Critically Appraise a Research Paper (CASP Checklist, With Examples) - Literature Review vs Systematic Review: What’s the Difference? --- # Snowballing in a Literature Review: How to Find Papers by Citation Chaining (2026) URL: https://litrevu.com/blog/snowballing-literature-review-citation-chaining Category: Literature Review Published: 2026-08-06 Summary: Snowballing means following citations backward and forward from papers you already have. How to do both directions, which free tools do it, the bias it introduces, and how to report it. Literature Review ## Snowballing in a Literature Review: How to Find Papers by Citation Chaining (2026) By Wasim Ghoor · 6 August 2026 · 9 min read What is a reference list, really? It is a map of a field, drawn by someone who spent months searching it before you arrived, and then printed at the back of their paper where most students never look twice. Every relevant paper you already have came with one. Snowballing, also called citation chaining, means finding new sources by following the citation links of papers you already have instead of running another keyword search. It works in two directions. Backward snowballing reads a paper’s reference list to find the earlier work it was built on. Forward snowballing finds the later papers that have cited it since. You start from a small seed set of central papers, chain in both directions, add anything that meets your criteria to the seed set, and repeat until new rounds stop producing anything new. It is the technique that most reliably rescues a review whose search felt thorough and whose results felt thin, because it finds papers by relationship rather than by wording. This guide covers both directions in detail, how to choose seeds, which tools do which direction, the bias snowballing introduces if you lean on it too hard, and how to report it so an examiner can repeat it. ## Why Citation Chaining Finds What Searching Misses A keyword search matches strings. A citation matches ideas. That one sentence is the whole argument for snowballing, and it explains the failure mode it fixes: two research communities can study the same phenomenon for a decade under different names, and no amount of care with your search terms will bridge them if you do not know the other name exists. A researcher who worked across both, though, cited both, and their reference list is where the bridge is. This is also why snowballing tends to improve the quality of a review rather than just its size. A reference list is not a neutral list of related work: it is a record of which papers someone judged worth arguing with. Following it puts you in contact with the debate rather than with a pile of topically similar studies, and a literature review is a conversation you are joining rather than a stack of summaries. Papers found by citation arrive already related to each other, which is exactly the raw material synthesis needs. ## Backward Snowballing, Step by Step Backward snowballing goes into the past: you take a paper you already have and mine its reference list for the work it stands on. It costs nothing and needs no tool, since the list is already in the PDF. Read the reference list with the paper still open, not on its own. The trick that makes this fast is to work from the in-text citations rather than alphabetically down the back page: find the places in the introduction and the related-work section where the author says something like “this builds on” or “in contrast to”, and chase those citations first. A reference cited once in passing in a methods footnote and a reference the whole argument rests on look identical in the bibliography, and only one of them is worth your afternoon. For each candidate, screen on title first, then on abstract, against the same criteria you use everywhere else in the review. A snowballed paper gets no easier ride for having been cited by someone you respect. Keep a note of which seed paper it came from, because that record is what lets you reconstruct the trail later and what turns a vague “I also checked reference lists” into a reportable method. Review articles and meta-analyses are the highest-yield backward seeds by a wide margin. Their reference lists are the output of somebody else’s systematic search, which means one hour spent on a good review’s bibliography routinely beats a day of database work. The catch is the publication date: a review from four years ago captures the field as it stood then, which is precisely why the forward direction exists. ## Forward Snowballing, Step by Step Forward snowballing goes into the future: you take a paper and ask who has cited it since. This is the direction that finds the current state of a debate, including the replication that failed, the critique that reframed the question, and the extension into your specific setting. You need a citation index for this, because the information does not exist in the paper itself. Google Scholar shows a Cited by link with a count under each result, and clicking it gives you the citing papers as a searchable set, which matters when a landmark paper has thousands of them. Semantic Scholar and OpenAlex both expose citations and references and are free to query. Web of Science and similar subscription indexes offer the same function with different coverage, and your library may already provide access. When a seed paper is heavily cited, do not scroll. Use the search within citing articles function to filter that set by a term from your own question, or sort by date and take the most recent two years. This is the single highest-value ten minutes in the whole method for a review that needs to look current: the papers published since your search terms were fixed are, almost by definition, the ones your search was least likely to phrase correctly. ## Choosing Your Seed Set Snowballing amplifies whatever you feed it, so the seed set is the decision that determines the result. Three to five papers is enough to start. What matters is that they are central to your question rather than merely relevant, and that they differ from each other: a recent empirical study, a review or meta-analysis, and something from a different tradition, region or discipline that approaches the same problem another way. Five papers from the same research group will chain into the same neighbourhood five times and leave you confident about a field you have only seen one corner of. Deliberate variety in the seeds is the cheapest available correction, and if your seeds all cite each other, that is the signal to go looking for a paper that disagrees with them before you chain any further. ## Which Tool Does Which Direction As of August 2026 the tools below cover the two directions between them. Coverage differs between citation indexes, so a paper showing 40 citing works in one and 60 in another is normal rather than an error, and checking two is worthwhile for a key paper. Tool Direction What it is good for The PDF itself Backward The reference list plus the in-text citations that tell you which references actually mattered. Free, always available, and the only source that shows you why a paper was cited. Google Scholar Forward The Cited by link, with the option to search within citing articles. The fastest way to answer who has responded to this paper since. Semantic Scholar, OpenAlex Both Open citation data covering references and citations, free to search and to query programmatically. Useful when you want the network rather than one hop. citationchaser Both Runs backward and forward chaining on a whole set of seed papers at once and exports the results, which is what you want for a systematic review rather than a paper-by-paper crawl. Research Rabbit, Connected Papers Both Visual citation networks built from seed papers. Good for seeing clusters and spotting the paper everything points at; less good as a record of what you searched. Web of Science and similar indexes Forward Curated citation indexing with filters, where your institution subscribes. Different coverage from the open sources, which is the reason to check it as well rather than instead. ## How Many Rounds, and When to Stop Snowballing is iterative, which is where the name comes from. Papers that pass screening in round one become seeds for round two, and so on. In practice two or three rounds is usually enough for a masters or doctoral literature review, and the returns fall off sharply after that. The stopping rule is saturation: you stop when a round of chaining returns papers you have already seen. That moment is worth trusting when it arrives from several directions at once, and worth doubting when it arrives early from a narrow seed set, which is the same thing as saying it is only meaningful if your seeds were varied. Formal guidance exists for this if your method needs to cite something: Claes Wohlin’s 2014 paper on guidelines for snowballing in systematic literature studies, published in the proceedings of the EASE conference, is the usual reference point. Set a time budget as well as a stopping rule. Citation chaining is unusually absorbing, and it is possible to spend a fortnight inside a citation network and emerge with sixty papers and no argument. ## The Bias You Inherit, and How to Correct It Here is the honest limitation, and it is the reason snowballing supplements a search rather than replacing one. Citation networks are not neutral. Highly cited work attracts more citations, which means chaining systematically favours the established centre of a field and systematically under-samples the periphery: recent work that has not accumulated citations yet, research from less well funded institutions and regions, and studies that reported null results and were quietly cited by nobody. Three corrections cost little. Run a proper database search first, so your seeds are not simply the papers that happened to reach you. Sort at least one forward search by date rather than relevance, which surfaces the newest citing work regardless of how cited it is. And go looking specifically for the tradition your seeds do not cite, which is often where the sharpest disagreement in your review will come from. Grey literature belongs in the same correction, since reports and theses are rarely well cited and are frequently where null results live. One more check before a snowballed paper goes into your draft: citation networks preserve papers long after the record has moved on, and a retracted study can keep being cited approvingly for years, so it is worth knowing how to check whether a paper has been retracted before you build a paragraph on one. ## How to Record and Report It Snowballing is a search method, so it is described in your methods with the same specificity as a database search. Record the seed papers, the directions you chained, the tools and indexes you used for the forward search, the dates you ran it, the number of rounds, and your stopping rule. Keeping a column in your source table for how each paper was found makes this write itself. For reporting counts, PRISMA 2020 distinguishes records identified from databases and registers from records identified by other methods, and citation searching sits in that second group with its own path through the diagram. The PRISMA flow diagram guide shows where those boxes sit. Since snowballing runs after your main search rather than instead of it, it is worth reading alongside how to write a search strategy , and how to find academic sources covers where the seed papers come from in the first place. ## Frequently Asked Questions ## What is snowballing in a literature review? Snowballing is finding new papers by following the citation links of papers you already have, rather than by running another keyword search. Backward snowballing means going through a paper’s reference list to find the earlier work it built on. Forward snowballing means finding the later papers that have cited it since. Together they are also called citation chaining, and they surface work that uses different vocabulary from your search terms. ## Is snowballing a substitute for a database search? No, it is a complement, and using it alone introduces a specific bias. Citation networks favour work that is already well cited, so a review built only by snowballing tends to inherit the blind spots of its starting papers and to under-represent recent, unfashionable, or differently framed research. The standard approach is a systematic database search first, then snowballing from the papers it returns to catch what the search terms missed. ## Which papers should I snowball from? Choose a seed set of roughly three to five papers that are genuinely central to your question rather than merely relevant, and make them varied: a recent empirical study, a review or meta-analysis, and a paper from a different school of thought or region. A review article is the highest-yield backward seed because its reference list is already a curated search. Snowballing from five near-identical papers mostly returns the same results five times. ## What free tools do citation chaining? Google Scholar’s Cited by link handles forward chaining on a single paper, Semantic Scholar and OpenAlex expose both citations and references and are free to search, citationchaser runs backward and forward chaining on a set of papers at once, and Research Rabbit and Connected Papers show the citation network visually. Reference lists in the PDF itself cost nothing at all and remain the most reliable backward source. ## How do I report snowballing in my methods or PRISMA diagram? PRISMA 2020 separates records found through databases and registers from records identified by other methods, and citation searching belongs in that second group with its own counts. In your methods, say which papers you snowballed from, whether you went backward, forward, or both, which tools and databases you used for the forward search, the date you ran it, and when you stopped. A reader should be able to repeat it. ## How Litrevu Compares to Other Research Tools These tools mostly solve different problems. Three of the four below help you find and evaluate papers. Litrevu starts after that, when you have the papers and need to understand them: it answers questions about your papers, compares them and checks your own writing against them. Elicit is the one with real overlap. Comparison of Litrevu, Elicit, Consensus, Scite and Research Rabbit by what each is best for, what it works from, what it outputs, and where each beats Litrevu. Tool Best for Works from What you get Where it beats Litrevu Litrevu Understanding, comparing and checking the papers you have already chosen PDFs you add, plus open-access papers you pick from an OpenAlex search Answers that cite the passage they came from, side-by-side comparison tables, and a check of your own writing against your papers Only a basic open-access search, no screening at scale, no view on whether a source is contested Elicit Finding papers and extracting structured data from them 138M paper corpus, and PDFs you upload Reports, tables, summaries and structured comparisons Far larger discovery corpus, systematic review screening into the thousands, purpose-built data extraction tables Consensus Answering an empirical yes or no question across the literature 200M+ peer-reviewed papers Synthesised answer with a meter showing how much of the literature agrees Answers questions across all published work in seconds; nothing in Litrevu does this Scite Checking whether a paper has been supported or contradicted since 1.6B+ classified citation statements Citation contexts labelled supporting, contrasting or mentioning Tells you if a source is contested. Litrevu has no view on this at all Research Rabbit Exploring outward from one paper to find related work Citation graph Visual networks of related papers, authors and topics Visual citation-graph discovery; Litrevu offers nothing comparable The honest split: if you do not yet have your papers, Elicit, Consensus and Research Rabbit will get you there faster than Litrevu can. Litrevu's only discovery is an open-access search (OpenAlex) when you add sources, where you pick which papers to add; it cites only the papers in your library and does not search the web for citations. If you want to know whether a study you already cite has since been contradicted, Scite answers that and Litrevu does not. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Elicit also works from uploaded PDFs, so the real difference there is the shape of the work: Elicit produces reports, tables and structured comparisons, with a purpose-built extraction workflow, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Its comparison tables are built in chat for a handful of papers and are not an extraction workflow. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Comparison verified as of August 2026 against each vendor's own documentation. These products change quickly, so check the current feature list before deciding. ## Ask Your Own Papers Snowballing has a habit of working too well. You start with five papers, you chain in both directions for a week, and you end up with sixty PDFs that are genuinely related to each other and no idea how to say what they collectively argue. Deciding what they argue is your work, and it is the part worth your best thinking. Litrevu is an AI assistant for writing backed by sources. It reads every paper you add. Upload the set your chaining produced to see the themes running through it and where the papers agree and disagree, or ask a question across all of them. Every answer opens to the exact passage it came from, so you can read it before you rely on it. Litrevu is free to start, and no credit card is required. Try Litrevu free One next action: open the most relevant paper you have, find the two or three references its introduction actually leans on, and chase those. That is backward snowballing, and it takes about fifteen minutes to find out whether your field has been talking about your question under a name you have not searched for yet. ## Related Guides - How to Find Academic Sources for a Literature Review - How to Write a Search Strategy for a Literature Review - How to Make a PRISMA Flow Diagram - How to Check Whether a Paper You Cited Has Been Retracted --- # How to Screen 500 Abstracts Without Reading Every One (2026) URL: https://litrevu.com/blog/how-to-screen-500-abstracts Category: Literature Review Published: 2026-08-03 Summary: Screen 500 abstracts with a title-and-abstract pass against written criteria, a screening tool like Rayyan or Covidence, and a second reader on a sample. The two-pass method, timing, and the counts you have to report. Literature Review ## How to Screen 500 Abstracts Without Reading Every One (2026) By Samuel de Bruyn · 3 August 2026 · 10 min read The search that returns 43 results feels like a failure. The search that returns 500 feels like a catastrophe, and it is usually the better search. The number is not the problem. The problem is that nobody tells you the 500 were never meant to be read. To screen 500 abstracts, write your inclusion and exclusion criteria down before you start, then work through the records in two passes: a fast title pass that removes anything clearly off topic, and an abstract pass that judges what is left against the written criteria. Record one decision per record, include, exclude, or unsure, with a reason code for every exclusion. Use a screening tool such as Rayyan or Covidence to deduplicate and keep the counts, and have a second reader screen a sample so you can catch a criterion that only reads clearly to you. What follows is the working method rather than the theory: how the two passes differ, what a defensible decision looks like, where a tool earns its place, how to handle the second-reader problem when you are studying alone around a job, and how the whole thing turns into the numbers your methods chapter has to report. ## What Screening Actually Means Screening is the stage between searching and reading, and it exists precisely because a good search returns far more than you can read. A database search is built to be sensitive rather than precise: you would rather it return 500 records including the 30 you need than 40 records missing 12 of them. Screening is how you convert that deliberate over-retrieval back into a working set, and it is a documented step in its own right, not an administrative chore before the real work. The step is split in two for a practical reason. The title and abstract pass judges a record on the small amount of text you already have, which costs seconds per record. The full text pass judges the surviving records on the whole paper, which costs anywhere from ten minutes to an hour each. Collapsing the two, which is what happens when someone opens every PDF in turn, is what turns a two day job into a three week one and is the single most common reason a literature review stalls at this stage. There is a quieter reason the split matters. A screening decision made on an abstract against written criteria is reproducible: another reader with the same criteria should reach the same answer. A decision made after skim reading a full paper tends to absorb everything else you noticed about it, which is harder to write down and harder to defend when someone asks why a particular study is missing. ## Write the Criteria Before You Open the First Record Screening without written criteria is not screening. It is sorting by instinct, and instinct drifts: the standard you apply at record 300 will not be the standard you applied at record 12, and there is no way to reconstruct which was which afterwards. Written criteria fix the standard in place so the drift has something to catch against. Good criteria are specific enough that a stranger could apply them. Population, intervention or phenomenon, study design, outcome, setting, language, and publication window are the usual axes, and each one needs a threshold rather than an adjective. “Recent studies” is not a criterion. “Published 2016 or later” is. If you have not fixed these yet, the companion guide on how to write inclusion and exclusion criteria walks through setting each threshold, and it is worth an hour before you screen anything. One habit saves an enormous amount of grief later: number your exclusion criteria. When you exclude a record you then record a number rather than a sentence, which is faster while screening and, more importantly, gives you the exclusion counts by reason that a methods chapter and a PRISMA diagram both ask for. Trying to reconstruct those counts from free-text notes at the end is miserable work. ## The Two-Pass Method, in Practice Before either pass, deduplicate. The same paper arriving from three databases is three records, and screening the same study three times is both wasted effort and a source of inconsistent decisions. Every screening tool deduplicates on import, and a spreadsheet can be sorted by title to do it by eye. The first pass reads titles only, and it is fast on purpose. You are looking for the records that are unmistakably about something else, which in a broad search is often a substantial share of the total. The rule for this pass is that you exclude only on certainty. A title that is ambiguous, uninformative, or merely unpromising survives to the next pass, because a title is a poor description of a paper and the cost of wrongly keeping a record is one abstract read, while the cost of wrongly dropping one is a gap in the review. The second pass reads the abstract against the numbered criteria, and it is where the real judgement sits. Take the criteria in a fixed order and stop at the first one that fails, which is both quicker and produces a cleaner reason code than weighing everything at once. Three outcomes only: include, exclude with a numbered reason, or unsure. Treat unsure as a real category rather than a failure of nerve, because a record whose abstract genuinely does not report the design or the setting is a full text question and forcing it either way is how a real study gets lost. Pass What you read, and what you decide Deduplication Titles and identifiers across all databases. Remove repeat records before any judgement is made, and note how many you removed, because that number is reported. Pass 1: title Title only, seconds per record. Exclude only what is clearly about a different topic. Anything ambiguous survives to pass 2. Pass 2: abstract Title and abstract against numbered criteria. Include, exclude with a reason number, or unsure. Stop at the first criterion that fails. Pass 3: full text The whole paper, for survivors and every unsure record. Exclusions here are reported individually with reasons, so keep the list. Work in blocks of about fifty with a break between them. Screening accuracy falls off well before you notice it falling off, and the records at the end of a three hour sitting get a measurably different standard from the ones at the start. For anyone screening after a full working day, which describes most distance and part time postgraduates, two blocks on a weeknight is a more reliable plan than one heroic weekend. ## How Long 500 Records Actually Takes Published estimates for screening time vary so widely by field and by how tight the criteria are that a borrowed number will mislead you more often than it helps. Measure your own instead, because it takes ten minutes and it is the figure you can actually plan against. Screen twenty records, time it, and multiply by twenty five for a first estimate of the abstract pass. Re-measure at about record 100. The first fifty are always the slowest, partly because the criteria are still settling and partly because early ambiguity forces you back to the protocol. If your rate has not improved by then, the criteria are the problem rather than your pace, and the fix is to sharpen the one criterion you keep hesitating over rather than to push through another 400 records at the same speed. ## Which Screening Tool Is Worth It A screening tool earns its place through three things: it deduplicates on import, it lets two people screen the same records without seeing each other’s decisions, and it exports the counts your flow diagram needs. Everything else is convenience. As of August 2026 the two most commonly used in health and social science are Rayyan and Covidence, and plenty of completed reviews were screened in a spreadsheet before either existed. Option What it does well, and what to check first Rayyan Built for title and abstract screening, with blinding for dual screening and keyword highlighting that speeds up the abstract pass. Check the current plan tiers on rayyan.ai before you rely on a specific feature, since what sits in the free tier has changed over time. Covidence Carries a review through screening, full text, and data extraction in one place, which suits a formal systematic review. Check whether your university already holds a licence before paying anything, because many do and it is rarely advertised to students. A spreadsheet Entirely workable for a few hundred records. One row per record, one decision column, one reason column, one column for the second reader. You deduplicate and count by hand, which is the real cost. Relevance ranking tools Reorder a record set so likely includes surface first, which shortens the tail. Useful for deciding what to read next. Not a substitute for a decision, and any use of one belongs in your methods. ## The Second Reader Problem Dual screening, where two people screen every record independently and then compare, is the expected standard in a formal systematic review. It exists because single screening misses records, and it misses them in a patterned rather than a random way: the studies that get dropped tend to be the ones whose abstracts are written in unfamiliar vocabulary, which is exactly where the interesting disagreements live. Most masters students do not have a second screener, and most masters reviews do not require one. The useful middle ground is calibration on a sample. Ask a classmate or a colleague to screen thirty or fifty of your records against your written criteria, then compare decision by decision. You are not measuring their accuracy. You are testing whether your criteria mean the same thing to someone who did not write them, and every disagreement points at a criterion that needs a sharper threshold before you screen the remaining records. Whatever you do here, describe it plainly in your methods. Single screening with a calibration sample is a defensible choice for a dissertation and reviewers read it as one. Single screening described as though it were dual screening is a different matter entirely. ## Where AI Helps, and Where It Must Not Decide Tools that rank records by predicted relevance are genuinely useful at this stage, and the reason is worth being precise about: they change the order you work in, not the standard you apply. Front loading the likely includes means the pattern in your criteria becomes obvious earlier, and the long tail of clear excludes goes faster because you already know what you are looking at. The line sits at the decision. An exclusion you did not make and cannot explain is an exclusion you cannot defend in a viva, and a screening log that says the tool decided is not a methods section. Institutional rules on AI assistance also vary by university and by department, and several have changed their wording in the last two years, so the safe order is to check your own institution’s current policy and to disclose what you used. Record what the tool did, record what you decided, and keep those separable. ## Turning Screening Into the Numbers You Have to Report Screening produces a specific set of counts, and they are far easier to capture as you go than to reconstruct afterwards: records identified per database, duplicates removed, records screened at title and abstract, records excluded at that stage, full texts sought and assessed, full texts excluded with a reason for each, and studies included. Those are the boxes of a flow diagram, and the guide to the PRISMA flow diagram shows how they fit together. Two of those counts are worth extra care. Duplicates removed is the one people forget to record before deleting, and full text exclusions are the only stage where each individual exclusion needs its own stated reason rather than a total. Keep the excluded full texts in a labelled folder until you submit, because if an examiner asks why a well known study is absent, the answer should take thirty seconds to find. Everything that survives screening then has to be judged on quality rather than relevance, which is a separate pass with a separate tool. If a study is in scope but poorly conducted, that belongs in your appraisal, not in your screening decision, and how to critically appraise a research paper covers where that line falls. It is also worth remembering that the size of your screening pile is set upstream, so if 500 records is unmanageable, the fix usually belongs in your search strategy rather than in screening harder. ## Frequently Asked Questions ## How long does it take to screen 500 abstracts? Rather than trust a general figure, measure your own rate: screen 20 records, time it, and multiply by 25. Most people find the first 50 slow and the rate roughly doubles once the criteria stop being ambiguous, so a mid-screen re-estimate is more accurate than the first one. Screening in blocks of 50 with a break between them holds the error rate down better than one long sitting. ## Do I have to read the full paper to screen it? No. Screening is deliberately split into a title-and-abstract pass and a full-text pass, and the first pass uses only the title and abstract. You read the full paper only for the records that survive the first pass, which is usually a small fraction of the total. If an abstract genuinely does not tell you whether a record qualifies, mark it unsure and carry it to full text rather than guessing. ## What is dual screening, and do I need it for a masters dissertation? Dual screening means two people screen the same records independently and compare decisions. Full dual screening is expected in a formal systematic review and is usually not required for a masters literature review. A practical middle ground for a student working alone is to have a second reader screen a sample of the records, compare, and resolve the disagreements before continuing, which catches a criterion that reads clearly to you and ambiguously to anyone else. ## Which tool should I use to screen abstracts? Purpose-built screening tools such as Rayyan and Covidence handle deduplication, blind dual screening, and exclusion reasons, and they export the counts a PRISMA diagram needs. A spreadsheet works for a few hundred records if you add a decision column and a reason column. Check each tool’s current plans and any institutional access before you commit, because terms change and universities often hold a licence already. ## Can AI screen abstracts for me? AI tools can rank records by likely relevance so the obvious includes surface early, and that reordering saves real time. Letting a tool make the exclude decision is a different thing, and it is the point at which you can no longer defend your own review. Use the ranking to choose what to read first, record every exclusion against a written criterion, and be ready to say in your methods exactly what the tool did and what you decided. ## How Litrevu Compares to Other Research Tools These tools mostly solve different problems. Three of the four below help you find and evaluate papers. Litrevu starts after that, when you have the papers and need to understand them: it answers questions about your papers, compares them and checks your own writing against them. Elicit is the one with real overlap. Comparison of Litrevu, Elicit, Consensus, Scite and Research Rabbit by what each is best for, what it works from, what it outputs, and where each beats Litrevu. Tool Best for Works from What you get Where it beats Litrevu Litrevu Understanding, comparing and checking the papers you have already chosen PDFs you add, plus open-access papers you pick from an OpenAlex search Answers that cite the passage they came from, side-by-side comparison tables, and a check of your own writing against your papers Only a basic open-access search, no screening at scale, no view on whether a source is contested Elicit Finding papers and extracting structured data from them 138M paper corpus, and PDFs you upload Reports, tables, summaries and structured comparisons Far larger discovery corpus, systematic review screening into the thousands, purpose-built data extraction tables Consensus Answering an empirical yes or no question across the literature 200M+ peer-reviewed papers Synthesised answer with a meter showing how much of the literature agrees Answers questions across all published work in seconds; nothing in Litrevu does this Scite Checking whether a paper has been supported or contradicted since 1.6B+ classified citation statements Citation contexts labelled supporting, contrasting or mentioning Tells you if a source is contested. Litrevu has no view on this at all Research Rabbit Exploring outward from one paper to find related work Citation graph Visual networks of related papers, authors and topics Visual citation-graph discovery; Litrevu offers nothing comparable The honest split: if you do not yet have your papers, Elicit, Consensus and Research Rabbit will get you there faster than Litrevu can. Litrevu's only discovery is an open-access search (OpenAlex) when you add sources, where you pick which papers to add; it cites only the papers in your library and does not search the web for citations. If you want to know whether a study you already cite has since been contradicted, Scite answers that and Litrevu does not. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Elicit also works from uploaded PDFs, so the real difference there is the shape of the work: Elicit produces reports, tables and structured comparisons, with a purpose-built extraction workflow, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Its comparison tables are built in chat for a handful of papers and are not an extraction workflow. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Comparison verified as of August 2026 against each vendor's own documentation. These products change quickly, so check the current feature list before deciding. ## Ask Your Own Papers Screening is the part of a review that only you can do, because every decision is a judgement against criteria you wrote and will have to defend. What comes after it is different work: thirty papers you have already chosen, waiting to be read, related to each other, and written up. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. You upload the studies that survived your screening, ask how each one was designed and what it found, and compare them in a table where every cell links to its passage. The write-up stays yours. Litrevu is free to start, and no credit card is required. Try Litrevu free One next action: open your criteria document and number the exclusion criteria before you screen another record. Twenty minutes now is the difference between counts you can report and counts you have to reconstruct. ## Related Guides - How to Write Inclusion and Exclusion Criteria - How to Write a Search Strategy for a Literature Review - How to Make a PRISMA Flow Diagram - How to Critically Appraise a Research Paper --- # Data Extraction for a Literature Review: Tools and Template URL: https://litrevu.com/blog/how-to-extract-and-chart-data-from-studies Category: Literature Review Published: 2026-08-01 Summary: Data extraction pulls the same facts from every study into one table. See the fields to include, a labelled example row and free tools to build it in. Literature Review ## Data Extraction for a Literature Review: Tools and Template By Jessica McLaren · 1 August 2026 · 15 min read · Updated 18 November 2026 Data extraction is the step where you pull the same set of facts from every included study (citation, design, sample, setting, measures, results and your appraisal) into one table, with one row per study and one column per fact. In a scoping review the same step is called charting the data, and in both cases the finished table is what lets you compare studies instead of summarising them one at a time. Definition: data extraction. Data extraction is the recording of predefined facts from each study in a review into fixed fields of a table or form, so that every study is described in the same way and the studies can be compared, counted or pooled. ## What is data extraction in a literature review? Data extraction in a literature review means deciding in advance which facts you need from each study and recording those facts in the same fields for every study. The result is a grid: rows are studies, columns are the questions you ask of every study. Highlighting a PDF or writing a paragraph of notes per paper is not data extraction, because neither can be sorted or compared across studies. Data extraction sits after screening and appraisal and before synthesis. The Cochrane Handbook calls the step “collecting data” and makes a piloted data collection form mandatory for a Cochrane systematic review (Cochrane Handbook version 6.5, 2024, chapter 5, MECIR standard C43). For a narrative review or a taught master's literature review chapter, nobody will ask to see the extraction table, but building one is still the most reliable way to write a chapter that compares studies rather than listing them. ## What should a data extraction table include? A data extraction table should include, at minimum, the citation, study design, sample, setting and country, the key variables or concepts, the outcome and result, the effect size or themes, an appraisal note, the page where each fact was found, and a note in your own words. The table below is a default set for a student review. Trim the fields to your research question rather than adopting all of them. Default fields for a student data extraction table Field What to record Why the field earns its place Citation Author, year and an identifier you can search on (DOI) The row label, and the thing you paste into the chapter Study design Randomised trial, cohort, cross-sectional survey, interview study, case study Decides how much weight the result carries and lets you group like with like Sample How many participants and who they were Differences in sample often explain why two studies disagree Setting and country Where and when the study was done Produces the geographic and time-period gaps in your review Key variables or concepts What was measured or explored, and how it was measured Catches two studies using the same word for different things Outcome and result What was found, in the direction the authors report it, with the number where there is one The finding you will compare across studies Effect size or themes The magnitude for quantitative studies; the named themes for qualitative studies Lets you compare size of effect, not just count studies for and against Appraisal note Your judgement of how far to trust the study, and the main limitation behind that judgement Stops a weak study and a strong study looking equally true Page or location The page, table or section each fact came from Lets you check one number later without rereading the paper Your note One line, in your own words, on how this study relates to the others The first comparative sentence of your review, kept separate from what the authors said The Cochrane Handbook's own checklist of data to collect (Table 5.3.a) groups the same ground into eight categories: information about the extraction itself, eligibility, study methods, participants, intervention, outcomes, results, and miscellaneous items such as the study authors' conclusions and funding. A health sciences systematic review should follow the Cochrane categories; a social sciences or education review can use the student default above. Write “not reported” in a cell when a study does not give the information, rather than leaving the cell blank. The Cochrane Handbook recommends including “not applicable”, “not reported” and “cannot tell” options on a data collection form, because a blank cell cannot be told apart from a field you forgot to fill. ## What does a data extraction table look like? A data extraction table looks like a spreadsheet with one row per study and one column per field, and each cell holds a short, specific value with a page reference. The row below is a format illustration only: the study is not real, and the bracketed placeholders show what kind of value goes in each cell, not a result. Format illustration: one row of a data extraction table (placeholder values, not a real study) Field Recorded value (illustration) Citation (Author, Year) Study design Prospective cohort, no randomisation, [duration] Sample [number] first-year undergraduates at one university Setting and country [country], [academic years] Intervention or exposure Weekly structured peer mentoring by trained senior students Outcome measure Retention into second year, from registry records (p. [x]) Result [percentage] retained vs [percentage] in the comparison group (p. [x]) Effect size [difference] as reported by the authors; confidence interval: not reported Appraisal note Participation was voluntary, so students who opted in may differ from those who did not; no adjustment for prior academic performance Your note Same direction as (Author, Year) and (Author, Year), but the only study of the three using registry data rather than self-report Compare that row with a typical first attempt: “(Author, Year) found that peer mentoring was quite effective and improved retention significantly. Good study.” Every word of the first attempt may be true, but it cannot be sorted, it hides the size of the effect, and it loses the self-selection problem. The table row keeps the number, the page and the weakness visible, so the result cannot quietly turn causal in your chapter. ## How do you do data extraction, step by step? Data extraction works best in five steps: set the fields from your research question, pilot the form on a few contrasting studies, extract every study, check a sample of your own rows, and record what you did for your methods section. Setting the fields first matters most. If you let columns emerge as you go, by the tenth paper you will have invented new fields and have to reopen every earlier paper. - Set the fields from your research question . Every field should answer one of two questions: what do I need to compare these studies fairly, or what will I need to quote to defend a claim? - Pilot the form. Extract two or three studies that differ from each other as much as your included set allows. Usually one field turns out to mean different things in different papers, and one fact you keep wanting to record has no field. Fix both before you go on. The Cochrane Handbook makes a piloted data collection form mandatory for Cochrane reviews (MECIR standard C43). - Extract every included study. Use one row per study, never one row per finding; put several findings on separate lines inside one cell. Copy numbers exactly as printed with their units, and do not round or convert while you extract. - Check a sample of your own rows. If you have no second extractor, re-extract a few rows several days later without looking at your first attempt, and compare. Disagreements show you which fields are ambiguous. - Record the process. Note who extracted, how the form was piloted and how disagreements were resolved, because the methods section of a systematic or scoping review must report it. Steal this methodology sentence, and edit it so every part is true of your review: Data were extracted into a piloted spreadsheet capturing study design, sample characteristics, setting, measures, reported outcomes and appraisal notes. The form was piloted on three studies and refined before full extraction. Where a value was not reported, this was recorded as “not reported” rather than left blank. ## How is data extraction done in a systematic review? In a systematic review, data extraction is done on a piloted form by at least two people working independently, with a set rule for resolving disagreements. The Cochrane Handbook (version 6.5, 2024, chapter 5) makes two independent extractors mandatory for outcome data (MECIR C46) and highly desirable for study characteristics (MECIR C45), and says the protocol should state how disagreements will be resolved. The reason is error. Buscemi and colleagues (Journal of Clinical Epidemiology, 2006) found that single data extraction produced more errors than double extraction, a relative difference of 21.7%, while double extraction took longer, a relative difference of 36.1%. The Cochrane Handbook also cites Jones and colleagues (2005), who found data extraction errors in 20 of 34 reviews. What the reporting guidelines ask you to report about extraction Review type Guideline and item What you must report Systematic review PRISMA 2020, item 9 (data collection process) The methods used to collect data from reports, including how many reviewers collected data from each report Systematic review PRISMA 2020, items 10a and 10b (data items) Every outcome and every other variable for which data were sought, defined, plus any assumptions about missing or unclear information Scoping review PRISMA-ScR, item 10 (data charting process) How data were charted, for example forms tested by the team before use, whether charting was done independently or in duplicate, and how data were obtained or confirmed from investigators Scoping review PRISMA-ScR, item 11 (data items) Every variable for which data were sought, defined, with any assumptions and simplifications A student writing a systematic review alone cannot meet the two-extractor standard. Say so in the methods, describe the substitute you used (such as re-extracting a sample of rows after a gap), and report it as a limitation. A trimmed version of the extraction table usually becomes the study characteristics table in the results, and the study counts feed your PRISMA flow diagram . ## Is charting the same as data extraction? Charting is the scoping review name for data extraction: the physical act is the same, but the purpose of the table differs. The PRISMA-ScR checklist (Tricco and colleagues, Annals of Internal Medicine, 2018) notes that the Arksey and O'Malley framework, the Levac and colleagues framework and the JBI guidance all call data extraction in a scoping review “data charting”. A data extraction table in a systematic review aims at a finding, so it goes deep on outcomes and effect sizes that can be compared or pooled. A charting table in a scoping review aims at a map of the field, so it usually has more columns about the studies (design, country, population, year) and fewer about results, because the shape and the gaps of the literature are the finding. If you are not sure which review you are writing, settle that first with scoping vs systematic vs narrative review , because the review type changes the columns. ## What do you extract from qualitative studies? From a qualitative study you extract the themes exactly as the authors named them, one short illustrative quote per theme with its page number, the analytic approach, and the participants and setting. From a quantitative study, by contrast, you extract values: the measure, the comparison, the direction, the magnitude and the precision where reported. Keep the qualitative authors' themes in their words in one column and your own interpretation in a separate column, so you can always see which is which. Note the analytic approach (thematic analysis, grounded theory, interpretative phenomenological analysis), because each produces a different kind of claim. If your review includes both qualitative and quantitative studies, use two tabs with shared descriptive columns and different outcome columns, rather than one table full of empty cells, and bring the two together at the synthesis stage. ## What tools can you use for data extraction? The tools for data extraction in a literature review range from a plain spreadsheet, which suits most student reviews, to dedicated systematic review software for team reviews. The table below compares the main options by what each is good for. Product details are as of November 2026; check each tool's current documentation before choosing. Data extraction tools compared Tool Good for Limits Spreadsheet (Excel, Google Sheets) Most student reviews: sorting and filtering by any column, freezing the citation column, hiding everything except design and outcome Long qualitative text is awkward in cells; no built-in comparison between two extractors Word or Google Docs table Small narrative reviews and qualitative studies with long quotes Limited sorting and no filtering; keep it in its own file, separate from the chapter draft Literature Review Matrix (Litrevu free tool) Starting a table: free Excel, Word and CSV templates, or add up to three of your own PDFs to fill the cells, each filled cell quoting its source passage Three PDFs per matrix; for a full review, download the template and continue in a spreadsheet Data systems named in the Cochrane Handbook (Covidence, EPPI-Reviewer, SRDR, DistillerSR) Team systematic reviews; the Cochrane Handbook (Table 5.4.a) lists them as data systems for collecting data from study reports Usually more than a solo student review needs; check whether your university library provides access Elicit Finding papers across a corpus of more than 138 million papers, systematic review screening, and structured data extraction into tables, including from PDFs you upload Output is reports, tables and structured comparisons rather than written prose; as with any extraction tool, check values against the paper before they go into your review Litrevu Checking your extraction: comparing a handful of your own papers side by side in a cited table, and asking questions answered only from your papers Not an extraction workflow and no screening at scale; for large extraction tables, Elicit or a dedicated data system is the better fit A reference manager such as Zotero, Mendeley or EndNote is not a data extraction tool. A reference manager stores citations, PDFs and notes, and you should keep using one alongside the extraction table; the comparison is in Zotero vs Mendeley vs EndNote . For a broader comparison of AI tools across screening, extraction and writing, see the best AI tool for a systematic review . ## Can AI extract data from studies, and how do you check it? AI tools can extract data from studies, but every value an AI tool extracts needs checking against the passage in the paper before it goes into your review. A living systematic review of data extraction automation (Schmidt and colleagues, F1000Research, version 3, 2025) found large language models used for data extraction in 17 of its included publications, and also reported a trend of decreasing quality in how results such as recall are reported. Check AI extraction the way a second human extractor would: take a sample of rows, open the paper, and confirm each value against the exact page, table or passage. Treat a value you cannot trace to a passage as unverified. Check your university's AI policy before using AI at any stage, and declare how you used it; the AI disclosure statement generator drafts a declaration you can edit. ## How do you turn a data extraction table into your literature review? You turn a data extraction table into a literature review by reading down the columns instead of across the rows, and writing one sentence for each pattern you find. Reading across a row gives you one study, which you already know. Reading down the outcome column across every study gives you the pattern, and the pattern is what your review has to say. Sort the extraction table by design and see whether the stronger studies agree with the weaker ones. Sort by country and see whether the finding travels. Sort by year and see whether the field changed its mind. Each sort produces a synthesis sentence, for example: “Most studies report a positive effect, but the studies using registry data rather than self-report show a smaller one.” Groups of related synthesis sentences become the themes that structuring a literature review by theme needs, and how to synthesize sources covers turning several rows into one argued paragraph. ## What are the most common data extraction mistakes? The most common data extraction mistakes are extracting into prose, letting field definitions drift, collecting too many fields, leaving out an appraisal column, and assuming a single extractor never slips. Each one makes the table look finished while leaving the studies impossible to compare. - Extracting into prose. Twenty-two paragraphs of notes, one per paper, cannot be sorted. That is summarising, not extraction. - Fields that drift. “Sample size” means participants in one row and schools in another. Write a one-line definition for each field at the top of the sheet and keep it visible. - Too many fields. A field you never sort by is a field you did not need. Trace every field to your research question or to a comparison you plan to make. - No appraisal column. Without one, a well-controlled trial and a small convenience survey sit side by side looking equally reliable. Add appraisal fields from the appraisal checklist and appraise in the same pass, since you are already reading the methods closely. - Trusting a single pass. Buscemi and colleagues (2006) found 21.7% more errors with single extraction than with double extraction. If you work alone, re-extract a sample of rows later and compare. One more check belongs in the same pass: confirm each paper has not been retracted before you extract from it. ## How do you check a data extraction table with an AI assistant for writing backed by sources? You check a data extraction table with an AI assistant for writing backed by sources by adding the studies you have already chosen and extracted, asking the assistant to compare them on your own fields, and opening each citation to confirm your table matches the passage. You still decide which studies count and what each field means; the assistant lines up the evidence in your papers so you can check your record against it. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The Litrevu workflow for checking an extraction table, using only the steps on how Litrevu works : - Add your included studies. Upload the PDFs, paste a PDF link, a DOI or an arXiv link. - Compare them on your fields. Ask for a side-by-side comparison on the fields you extracted, for example design, sample, findings and limitations. Each cell of the comparison table carries a citation. - Open the citations. Each citation opens the source PDF with the cited passage highlighted, so you can check a value in your own table against the page it came from. - Ask about disagreements. Ask where the studies agree and where they differ on an outcome. Litrevu answers only from your papers and says when your papers do not cover a question. - Check your synthesis paragraph. Paste a paragraph you wrote from the table, and each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover that claim, not that the claim is wrong or that the literature has a gap. Litrevu's comparison tables are built in chat for a handful of papers. Litrevu is not an extraction workflow and does not replace your extraction table; Litrevu is a way to check your extraction table against the papers before you write. ## Data extraction FAQ ## Do I need data extraction for a narrative review? A narrative review does not formally require data extraction, and most universities will not ask to see an extraction table for a narrative literature review. Building a simple extraction table is still worth it, because sorting studies by design, sample or result is the quickest way to write a narrative review that compares studies instead of summarising them one by one. ## How many people should extract the data? The Cochrane Handbook makes at least two people working independently mandatory for outcome data in a Cochrane systematic review, and highly desirable for study characteristics. A student working alone should say so in the methods, re-extract a sample of rows after a gap to check for errors, and report single extraction as a limitation. ## What is the difference between a data extraction form and a data extraction table? A data extraction form is the template of fields you fill in for each study, and a data extraction table is the collected result, with one row per study. In a spreadsheet the two are usually the same file: the column headings are the form and the rows are the extracted data. ## Should I appraise and extract in one pass? Appraising and extracting in one pass saves opening every paper twice, because filling in the design and sample fields already means reading the methods section closely. Add appraisal columns from a checklist suited to the study design to the extraction table, and record the main weakness of each study as a short sentence rather than a single score. ## Can AI extract data from studies, and how do I check it? AI tools can extract data from studies, but every AI-extracted value has to be checked against the passage in the paper before it goes into a review. Check a sample of rows the way a second extractor would, opening each paper at the cited page, and declare AI use in line with your university's AI policy. ## Is a data extraction table the same as a literature review matrix? A data extraction table and a literature review matrix are the same kind of grid, with one row per study and one column per question. The term data extraction is used for systematic and scoping reviews and usually has more fields, while a literature review matrix is the lighter version used for a narrative review or a thesis chapter. ## Build your data extraction table on your own papers Start with the three most different studies in your set: set your fields, extract those three properly, and fix whichever fields break before you do the rest. Once the extraction table is built, add the same papers to Litrevu to check each row against the passage it came from before you write. Free to start, no credit card required. Check your table against your papers ## Related Guides - How to Synthesize Sources in a Literature Review - How to Appraise a Research Paper: CASP Checklist by Design - PRISMA Flow Diagram: How to Report Your Search - How to Organize Research Sources: A System That Actually Works --- # How to Appraise a Research Paper: CASP Checklist by Design URL: https://litrevu.com/blog/how-to-critically-appraise-a-research-paper Category: Literature Review Published: 2026-07-31 Summary: Critical appraisal judges whether a study can be trusted. Pick the right checklist for your study design from one table, then see CASP worked on a paper. Literature Review ## How to Appraise a Research Paper: CASP Checklist by Design By Wasim Ghoor · 31 July 2026 · 15 min read · Updated 17 November 2026 To appraise a research paper, you judge whether its methods make its findings trustworthy, using a checklist matched to the study's design: CASP or JBI for most designs, RoB 2 for randomised trials, ROBINS-I for non-randomised studies of interventions and AMSTAR 2 for systematic reviews. For each study you record a judgement with a reason, not a score, and that judgement sets how much weight the study carries in your literature review. Critical appraisal is the structured assessment of a study's design, conduct and reporting to decide how far its results can be trusted and how well they apply to your question. Critical appraisal is asked only of studies that have already passed screening for relevance. Which checklist to use for each study design Study design in front of you Checklist to use What you record Randomised controlled trial CASP RCT checklist, or RoB 2 for a formal systematic review Judgement per question, or RoB 2: low risk, some concerns, high risk Cohort or case control study CASP cohort or case control checklist, or JBI Judgement with reasons; JBI adds include, exclude or seek further info Non-randomised study of an intervention ROBINS-I (formal reviews) Low, moderate, serious or critical risk of bias Qualitative study CASP qualitative checklist, or JBI qualitative checklist Judgement with reasons; JBI: yes, no, unclear, not applicable per item Systematic review you cite as evidence AMSTAR 2, CASP or JBI systematic review checklist AMSTAR 2: high, moderate, low or critically low confidence Text, opinion or policy document JBI textual evidence checklists Judgement with reasons ## What is critical appraisal of a research paper? Critical appraisal of a research paper is a trust decision: does the study's design, conduct and reporting give you reason to rely on its findings for your question? Critical appraisal comes after screening, which only decided that the paper is about your question, and before synthesis, where you decide what the body of evidence supports. Think of each included study as a witness rather than a fact. A court does not simply write down what a witness said. It asks how the witness was placed to know, what might have shaped the account, and how sure the witness was about the parts that matter. Critical appraisal asks the same three things of a study: how was the study placed to answer the question (design), what might have distorted the result (bias), and how precise is the result (the confidence interval)? The Cochrane Handbook draws the line between bias and imprecision clearly: bias is systematic error, imprecision is random error from sampling, and “bias should not be confused with imprecision” ( Cochrane Handbook, chapter 7, section 7.1.1 ). A small study can be at low risk of bias and still imprecise; a large study can be precise and still badly biased. Critical appraisal judges both, and a judgement about the study is never a verdict on the authors. ## How do you appraise a research paper, step by step? You appraise a research paper in six steps: identify the study design, choose the checklist for that design, answer each checklist question with a reason, form an overall judgement, write down what the study can and cannot support, and record all of it in your matrix. The steps take the same shape for every design; only the checklist questions change. Six steps to appraise one research paper Step What you do What you have at the end 1. Identify the design Read the methods section, not the abstract's label A design name (cohort, RCT, qualitative, systematic review) 2. Choose the checklist Match the tool to the design (table above) One named tool, used for every study of that design 3. Answer each question Give yes, no or can't tell, plus the reason from the paper A completed checklist with page references 4. Form an overall judgement Weigh the questions that matter most for that design Strong, moderate or weak (or low, moderate, high concern) 5. State what it can support Say which claims the study can carry One sentence you can reuse in your chapter 6. Record it Add design, tool, judgement, limitation and support to your matrix A row you never have to reopen the PDF for Step 1 matters more than students expect. Authors sometimes call a study “experimental” when participants chose their own group, which makes the study observational and changes the checklist. Step 3 is where a page reference saves you later: a judgement that says “no adjustment for working hours (p. 7)” can be checked by your supervisor, while “felt weak” cannot. ## Which appraisal checklist fits which study design? The appraisal checklist has to match the study design, because the threats to a trial and the threats to an interview study are different: randomisation and blinding are meaningless questions for a qualitative study, and researcher reflexivity is a meaningless question for a trial. For most master's and doctoral literature reviews, CASP is a sensible default; JBI covers more designs; RoB 2, ROBINS-I and AMSTAR 2 are for formal systematic reviews. Critical appraisal tools compared Tool Published by Use it on Structure and judgement Source CASP checklists Critical Appraisal Skills Programme (UK) Eight designs: systematic reviews, randomised controlled trials, cohort, case control, economic evaluations, diagnostic studies, qualitative studies, clinical prediction rules Questions in three sections (are the results valid, what are the results, will the results help locally); the 2024 cohort checklist has 12 questions casp-uk.net JBI critical appraisal tools JBI Fifteen checklists, including RCTs, quasi-experimental, cohort, case control, analytical cross-sectional, prevalence, case series, case reports, qualitative research, systematic reviews and three textual evidence types Yes, no, unclear or not applicable per item; overall include, exclude or seek further info (2020 qualitative checklist: 10 questions) jbi.global RoB 2 Cochrane (Sterne et al., 2019) Randomised trials Five bias domains; each domain and the overall result judged low risk of bias, some concerns or high risk of bias riskofbias.info ; BMJ 2019;366:l4898 ROBINS-I Sterne et al., 2016 Non-randomised studies of interventions Seven bias domains judged against a hypothetical target trial: low, moderate, serious or critical risk BMJ 2016;355:i4919 AMSTAR 2 Shea et al., 2017 Systematic reviews of healthcare interventions 16 items, 7 of them critical; overall confidence high, moderate, low or critically low BMJ 2017;358:j4008 GRADE GRADE Working Group A body of evidence on one outcome, after individual appraisal Certainty high, moderate, low or very low; not a per-paper checklist Cochrane Handbook, chapter 14 The five RoB 2 domains are bias arising from the randomisation process, bias due to deviations from intended interventions, bias due to missing outcome data, bias in measurement of the outcome, and bias in selection of the reported result ( Cochrane Handbook, chapter 8 ). Reach for RoB 2 or ROBINS-I only when your review has to report risk of bias domain by domain, which is normal in a systematic review and unusual in a narrative dissertation chapter. Whichever tool you choose, name it in your methodology and use the same tool for every study of that design. ## How is appraisal different from screening and peer review? Screening decides whether a study is relevant to your question; critical appraisal decides whether a relevant study can be trusted; peer review is a journal's decision to publish. A paper can pass all three of screening, peer review and publication and still carry only weak support for the claim you want to make. Screening, critical appraisal and peer review compared Screening Critical appraisal Peer review Question asked Does the study match my eligibility criteria? Do the methods make the findings trustworthy for my question? Is the manuscript fit for this journal? Who does it You, against your inclusion and exclusion criteria You, with a design-specific checklist A few reviewers chosen by the editor, usually without the raw data Output Include or exclude A judgement with reasons and a statement of what the study can support Accept, revise or reject When Before appraisal After screening, before synthesis Before publication Screening is set by your inclusion and exclusion criteria , and the answer is yes or no. Peer review is a useful filter, but a journal accepting a paper does not tell you how much weight one finding deserves inside your argument; published papers are corrected and retracted, which is why it is worth knowing how to check whether a paper has been retracted . To confirm that a source went through peer review in the first place, the Peer Review Checker in this guide's free tools checks any paper by DOI, link or title. ## What does a CASP appraisal look like on one paper? A CASP appraisal of one paper is the checklist's questions answered in order, each with a reason from the paper, ending in one sentence about what the study can support. The worked case below uses the CASP cohort study checklist (2024) , whose 12 questions sit in three sections: are the results valid, what are the results, and will the results help locally. Format illustration: the study below is invented to show the method. It has no real authors and no real figures. Suppose a literature review asks whether structured writing support improves thesis completion among part-time postgraduate students, and one included paper is a single-university cohort study comparing students who attended a writing programme with students who did not. - Did the study address a clearly focused issue? Yes: population, exposure and outcome are stated. Note the exact outcome, because “completed” and “submitted within the time limit” are different claims. - Was the cohort recruited in an acceptable way? Students chose whether to attend. Self-selection is the most important line in this appraisal, because motivated students may both sign up and finish regardless of the programme. - Was the exposure accurately measured? Attendance was self-reported, which is weaker than a register. - Was the outcome accurately measured? Completion came from university records, which is objective. - Were confounding factors identified and accounted for? The analysis adjusted for age and faculty but not for prior research experience or employment hours, two plausible drivers of completion for part-time students. - Was follow-up complete and long enough? Record how many students were lost and ask whether the students who left were the ones struggling. - What are the results? Record the effect size, not only whether the result was significant. - How precise are the results? Record the confidence interval. A wide interval that crosses no effect says something a p value hides. - Do you believe the results? Partly: the direction is plausible, but self-selection and the missing adjustments suggest the size of the effect is overstated. - Can the results be applied to the local population? One institution and one programme design limit how far the finding travels. - Do the results fit with other available evidence? Compare the direction with the other included studies. - What are the implications for practice? State what the study could justify, and what it could not. The output of the CASP appraisal is a usable sentence: “This study offers moderate support for the direction of the effect and weak support for its size, because participants chose their own group and the analysis did not adjust for prior research experience or working hours.” ## Should you give studies a quality score? No: record a judgement with reasons rather than adding up “yes” answers into a quality score. Adding answers implies every question carries equal weight, and the Cochrane Handbook notes that the choice of quality scale “could significantly influence the interpretation of the meta-analysis results” and that a combined summary score “is difficult to interpret” ( Cochrane Handbook, chapter 7, section 7.1.2 ). The AMSTAR 2 authors say the same of their own tool: “AMSTAR 2 is not intended to generate an overall score” ( Shea et al., 2017 ). Unaddressed confounding in an observational study matters far more than a vague description of the setting, and a total of yes answers hides that difference. If your department or supervisor requires a score, report the score alongside the reasons, never instead of them. ## How do you record appraisal in a literature review matrix? You record critical appraisal as four extra columns in the literature review matrix or extraction table you already fill in while reading: design and tool, overall judgement, main limitation, and what the study can support. Recording appraisal during reading means you never reopen the PDFs for a second pass. Four appraisal columns for your literature review matrix Column What goes in it Example (format illustration) Design and tool The design and the checklist used Cohort study; CASP cohort checklist (2024) Overall judgement Three levels is enough Moderate Main limitation One specific problem, with a page reference Self-selection into groups; no adjustment for working hours What it can support The claims the study can carry Direction of effect only, not its size If you have not built the matrix yet, the system in how to organize research sources sets one up, and the Literature Review Matrix in this guide's free tools builds a comparison table from your own PDFs. The same columns slot into a data extraction table if your review extracts outcomes study by study. When a second person appraises with you, appraise two or three papers independently and compare first: disagreement usually means the two appraisers read a checklist question differently, which is better found on paper three than on paper thirty. ## Do you need to appraise every study in a literature review? A systematic review appraises every included study; a scoping review usually does not; a narrative literature review in a dissertation or thesis sits in between. The PRISMA extension for scoping reviews lists critical appraisal of individual sources as “Item 12 (Optional)” ( Tricco et al., PRISMA-ScR, 2018 ), because a scoping review maps what research exists rather than what the research shows. The review type therefore sets how formal the appraisal must be, which is covered in scoping vs systematic vs narrative review . In a narrative chapter, appraising the studies your argument leans on hardest strengthens the chapter even where no examiner requires it. Ask your supervisor which applies before you appraise thirty papers: the answer usually takes one line. Appraisal sits after the search strategy and the PRISMA flow diagram , and before synthesis. ## How does appraisal change what you write? Critical appraisal changes a literature review from a list of findings into an argument about what the evidence supports, because each study is cited with the weight its methods earn. The change shows in individual sentences. Format illustration with placeholder citations: Before appraisal: (Author, Year) found that writing support improved completion. (Author, Year) reported a similar effect. (Author, Year) also found benefits for part-time students. After appraisal: Three studies report a positive association between structured writing support and completion, but the strength of that evidence varies. The only study to adjust for prior research experience found the smallest effect, while the two larger effects come from cohorts in which students selected the programme themselves (Author, Year; Author, Year; Author, Year). The direction is consistent; the size remains uncertain. The second paragraph is the summary-to-synthesis move described in how to synthesize sources in a literature review , and appraisal supplies its raw material. Appraisal also earns three sentences in your methodology section , for example: “Included studies were appraised with the CASP checklist for each design by one reviewer, with judgements recorded during extraction. No study was excluded on appraisal grounds; quality was weighted in the synthesis and is reported per study in Appendix B.” Decide openly whether weak studies are excluded or kept and weighted; both are defensible, and deciding silently, study by study, depending on whether a result agrees with you is not. ## What mistakes do students make in critical appraisal? The five common critical appraisal mistakes are treating peer-reviewed papers as automatically sound, appraising without a tool, using the wrong checklist for the design, over-weighting sample size, and appraising without the judgement ever reaching the written chapter. Five critical appraisal mistakes and how to fix them Mistake Why the mistake matters Fix Treating peer reviewed as sound Every study is cited as equally reliable, so nothing has been appraised Appraise each included study with a named checklist Appraising by feel “This one felt weak” is not reproducible and drifts with your opinion Ask the same checklist questions of studies you agree and disagree with Wrong checklist for the design Marking a qualitative study down for no blinding is a category error Identify the design from the methods section first Over-weighting sample size A large, badly recruited sample is a large biased study; size makes systematic error look more certain Judge bias and precision separately (Cochrane Handbook, section 7.1.1) Appraisal stuck in an appendix A table nobody cites in the prose is wasted work Let each judgement shape the sentence that cites the study ## How do you compare appraised papers with an AI assistant for writing backed by sources? An AI assistant for writing backed by sources helps after you have appraised your papers, by lining up the details you need to weigh them, each linked to its passage. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. On appraisal work, the Litrevu workflow on your own papers runs like this: - Add the papers you included. Upload the PDFs, or paste a PDF link, DOI or arXiv link. - Ask the questions your checklist asks. “How were participants recruited in each study?” or “Which studies adjusted for confounders, and which confounders?” Litrevu answers with citations from your papers only, and says so when your papers do not cover a question. - Open each citation. Every citation opens to the highlighted passage on the PDF page, so you can check the recruitment method or the adjustment list yourself before you write a judgement. - Compare the studies in a table. Line up design, sample, findings and limitations side by side, with a citation in each cell. - Check your draft paragraph. Paste the paragraph where you weigh the studies; each claim comes back Supported, Partly supported, Contradicted or Not in your papers. The judgement stays yours: Litrevu finds and lines up the evidence in your papers, and you decide how much each study can bear. “Not in your papers” means your library does not cover a claim, not that the claim is wrong or that no study exists. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your university's policy and declare how you used AI. ## Frequently asked questions ## Is critical appraisal the same as peer review? No. Peer review is a journal's decision, made by a few reviewers before publication, about whether a manuscript is fit to publish. Critical appraisal is your own structured judgement, made with a design-specific checklist, about how far a published study can support a claim in your review. ## Do I need to appraise every study in a literature review? A systematic review appraises every included study, while a scoping review usually does not: PRISMA-ScR lists critical appraisal as optional (Item 12). A narrative literature review in a dissertation or thesis falls in between, so ask your supervisor, and at minimum appraise the studies your argument relies on most. ## Are CASP checklists free? Yes. The Critical Appraisal Skills Programme describes its checklists as free to download, and the 2024 cohort study checklist carries a Creative Commons Attribution Non-Commercial Share Alike licence. CASP offers eight checklists, one per study design, as a printable form or a version to fill in electronically. ## Should I give studies a quality score? Usually not. The Cochrane Handbook explains that summary scores from quality scales are difficult to interpret, and the AMSTAR 2 authors state that AMSTAR 2 is not intended to generate an overall score. Record a judgement with reasons for each study; if your department requires a score, report the reasons alongside it. ## What is the difference between CASP and JBI checklists? CASP offers eight checklists with questions grouped into three sections: are the results valid, what are the results, and will the results help locally. JBI offers fifteen checklists, including prevalence studies, case series and textual evidence, with each item answered yes, no, unclear or not applicable and an overall decision to include, exclude or seek further information. ## Which checklist should I use for a qualitative study? Use the CASP qualitative studies checklist or the JBI checklist for qualitative research (the 2020 JBI version has 10 questions). Do not use a trial or cohort checklist on a qualitative study, because questions about randomisation and blinding do not apply to interview or focus group research. ## How do I write up critical appraisal in my methodology? Name the checklist used for each design, say who appraised the studies and when, and state whether any study was excluded on appraisal grounds. Three sentences are usually enough, with the per-study judgements reported in a table or appendix and reflected in how the chapter cites each study. ## Where should you start with critical appraisal? Start critical appraisal with one included paper: download the CASP checklist that matches its design, work through the questions with a reason for each, and write one sentence about what the study can and cannot support. Judging the evidence is your work and nobody can do it for you. You read the methods, you saw the confounder nobody adjusted for, and you are the one who has to defend the weight you gave each study. What helps is having the details in front of you: each study’s design, sample and limitations, with the passage behind each one. That is where Litrevu helps. Add the papers you have already chosen and appraised, ask it to compare their aims, designs, samples, findings and limitations, and you get a table in which every cell cites the passage it came from. Open any cell to check it against the page, then put your own weighting on each study. Litrevu is free to start, no credit card required. Try Litrevu free ## Related Guides - Scoping vs Systematic vs Narrative Review: Which Do You Need? - How to Synthesize Sources in a Literature Review (Step-by-Step, With Examples) - How to Write Inclusion and Exclusion Criteria (With Examples) - How to Check Whether a Paper You Cited Has Been Retracted (2026 Guide) --- # How to Check Whether a Paper You Cited Has Been Retracted (2026 Guide) URL: https://litrevu.com/blog/how-to-check-if-a-paper-has-been-retracted Category: Literature Review Published: 2026-07-30 Summary: How to check if a paper in your reference list has been retracted. The five-minute check on one paper, how to scan a whole bibliography, Zotero retraction alerts, and what to do when you find one. Literature Review ## How to Check Whether a Paper You Cited Has Been Retracted (2026 Guide) By Samuel de Bruyn · 30 July 2026 · 10 min read A journal retracts a paper. The PDF stays online, usually with a notice stamped across the first page, sometimes with nothing at all. And the paper keeps getting cited, for years, by people who never saw the notice. If one of those people turns out to be you, and your marker or reviewer spots it before you do, the conversation you have next will not be about your argument. This is one of those checks nobody teaches you and everybody assumes you already do. It takes about five minutes for a single paper and maybe half an hour for a full reference list. I want to walk you through exactly how to do it, because the alternative is trusting that none of the forty or sixty papers you gathered over eighteen months has been withdrawn in the meantime, and that is a bigger bet than most people realise. Check your whole reference list at once The free reference checker looks up every reference in Crossref, which carries the Retraction Watch database, and flags retracted papers, expressions of concern and details that do not match the record. Open the reference checker ## A Retraction Is Not a Deletion When a journal retracts an article, it is saying the findings should not be relied on. That is the whole meaning of it. The paper does not vanish from the internet, and it does not vanish from Google Scholar . It usually stays exactly where it was, sometimes behind a notice, sometimes not, and anyone who downloaded the PDF before the retraction has a copy that looks completely normal. The reasons vary more than you might expect. Fabricated or manipulated data, duplicated images, plagiarism, undisclosed conflicts of interest, and paper-mill output are all in there. So is honest error. Plenty of retractions happen because the authors themselves found a mistake in their own analysis and asked for the paper to be pulled, which is the system working rather than failing. That distinction matters if you ever need to discuss a retracted study in your writing, because “retracted” and “fraudulent” are not synonyms and you should not imply they are. Retraction Watch keeps the largest list of these that exists. By late 2025 the database held more than 63,000 entries, and Crossref acquired it in September 2023 and made the whole thing freely available, which is the reason all the checks below are free. You do not need an institutional subscription for any of this. ## Why Almost Nobody Catches One by Accident Think about the actual shape of a research project. You find a paper in early 2025, save the PDF into a folder, write your notes, export the citation into your reference manager, and move on. The retraction notice is published in late 2025. Your folder still contains the same PDF. Your reference manager still contains the same entry. Your notes still say what they said. Nothing anywhere in that chain pings you. There is no natural moment in a normal workflow where anyone checks, which is why retracted papers keep collecting citations after they have been withdrawn, frequently in papers that make no mention of the retraction at all. A study published in June 2026 looked at how quickly Wikipedia corrects citations to retracted papers and found a median correction time of 3.68 years. Wikipedia has thousands of active volunteer editors and a culture built entirely around sourcing. If it takes them the better part of four years, one postgraduate student working alone at eleven at night is not going to spot it on instinct. So the check has to be deliberate. It has to be a step you do, not a thing you hope you would notice. ## The Five-Minute Check on a Single Paper If you have one paper you are unsure about, here is the order I would work through. Stop as soon as you get a clear answer. - Go to the DOI. Open the paper on the publisher’s own site rather than the PDF on your hard drive. The publisher page is the authoritative record, and a retraction will normally show as a banner, a linked retraction notice, or “RETRACTED:” in front of the title. This single step catches most cases. - Search the Retraction Watch database. It is free and searchable by DOI, title, or author. This is the one to trust when the publisher page is ambiguous, and it also tells you the reason for the retraction and the date, which the publisher page sometimes buries. - Check PubMed if you are in health or life sciences. PubMed tags retracted publications and lets you filter by publication type, so a quick title search there gives you a clear yes or no. - Look at Google Scholar, but do not rely on it. Scholar does label some retracted work, and it is convenient because it is probably already open in another tab. It is also inconsistent, so treat a clean Scholar result as weak evidence rather than an all-clear. - Glance at PubPeer. Comments there are not retractions, and a flagged paper is not automatically a bad paper. But if a study is under sustained methodological criticism, that is worth knowing before you build a chapter on it. For most papers you will be done at step one or two. ## Scanning a Whole Reference List Without Losing Your Afternoon A full bibliography is a different job, and doing forty individual DOI lookups by hand is grim. Two things make it manageable. First, collect your DOIs in one place. If your references live in a reference manager you can export them, and if they live in a Word document you can pull the DOIs out into a plain list. Either way, having them all in one column turns a vague worry into a finite task. Then triage rather than treating every entry equally. The papers that deserve careful checking are the ones doing load-bearing work in your argument, the studies you cite for a headline finding or a number you quote. After that, prioritise older papers, since retraction usually lags publication by a couple of years, and anything you picked up secondhand from another paper’s reference list rather than reading yourself. Those secondhand citations are where retracted work travels, because nobody in the chain ever opened the original. Papers you cite once, in passing, as one of three examples of a general trend, matter less. If one of those turns out to be retracted you cut it and the sentence survives. ## Let Your Reference Manager Watch for You This is the part that genuinely changes your odds, and it is the reason I keep recommending Zotero to students even though the three big reference managers are close on most other features. Zotero has been integrated with the Retraction Watch data since 2019. It checks your library automatically, flags retracted items in the item list, and shows you a warning with the retraction details when you click one. Better than that, if you try to cite a flagged paper through the word processor plugin it will stop and ask whether you really want to, and if a paper you already cited gets retracted later it warns you the next time you update the document’s citations. That last behaviour is the one that saves people, because it catches the retraction that happened after you wrote the sentence. Two caveats worth knowing. The feature works on items that have a DOI or a PMID recorded, which covers roughly three quarters of the Retraction Watch data, so an entry you typed in by hand without a DOI is invisible to it. And you do not need to sync your library or upload anything for this to work, which I mention because a few people avoid the feature thinking it sends their reading list somewhere. If you are already deep into Mendeley or EndNote, that is not a reason to migrate mid-thesis. It does mean the manual check matters more for you. Our comparison of Zotero, Mendeley, and EndNote goes through the wider trade-offs if you are still deciding. ## You Found One in Your Draft. Now What? Do not panic, and do not quietly hope it is fine. There are really three situations. If the retracted paper is carrying a claim your argument depends on, you have to replace it. Go back to the source of that claim and find out whether it holds up independently. Sometimes it does, and two other studies support the same point, in which case you cite those and move on. Sometimes it does not, and the honest outcome is that the claim comes out of your work. That is uncomfortable, and it is also the correct result, because the alternative is building a chapter on a finding the field has withdrawn. If it is a minor supporting citation, cut it. The sentence will usually stand on its own or work with one of your other sources. And occasionally you will want to keep it on purpose. Discussing a retraction is legitimate, especially if the paper shaped the field before it was withdrawn or if the retraction is itself part of your story. In that case cite it explicitly as retracted, name the retraction in the sentence, and cite the retraction notice alongside the original. Something like: “An early and widely cited study reported a strong association, though the paper was retracted in 2024 following concerns about the underlying data.” Your marker now knows you know. If the work has already been submitted or published, tell your supervisor or the editor rather than sitting on it. Nobody enjoys that email. It is still much smaller than the version where somebody else finds it. ## Where AI Tools Will Not Save You Retraction status is metadata that lives outside the paper. It is published after the fact, in a separate notice, and the text of the article does not change. That is why language models are poor at this: a model that has read a paper’s contents has no way of knowing that a notice appeared eighteen months later unless it goes and looks the record up. A 2026 study in JMIR tested freely available AI tools on exactly this and found they cannot reliably identify retracted literature. Which gives you two distinct reference problems to guard against rather than one. The first is references that do not exist, the confident, plausible, entirely invented citation, and we covered how to catch those in how to spot fake AI citations before you submit . The second is references that exist perfectly well and have been withdrawn. The checks are different, and passing one tells you nothing about the other. Worth saying plainly, since Litrevu is an AI tool: working from PDFs you gathered yourself removes the invented-citation problem, because every source is a real paper you chose and can open. It does not remove the retraction problem. No tool that reads your PDFs can tell you what a journal published about them afterwards. That check stays yours, and it belongs in your process alongside the reading itself. If you want the fuller picture of what these tools can and cannot do, can AI write a literature review is our honest attempt at it. ## Make It a Step, Not a Heroic Act The reason this gets skipped is that it feels like extra work at the exact moment you have the least energy. So build it in at two points where it costs you almost nothing. Check when you add a paper. You are already on the publisher page downloading the PDF, so noticing a banner takes no additional time. If you are recording sources properly as you go, whether in a matrix or an annotated bibliography , add a column or a line for “retraction checked” with the date. It looks fussy. It is the difference between checking once and re-checking everything in a panic later. Then check again before you submit, on your load-bearing sources only. Twenty minutes, maybe thirty. Put it in the same pass where you verify that every citation actually says what you claim it says, which is a habit worth having anyway. If you are still assembling your sources rather than writing them up, this fits naturally alongside your search strategy and your inclusion and exclusion criteria . A retraction check is really just one more eligibility rule: the paper has to still stand. ## Ask Your Own Papers Checking your sources is the part only you can do. You chose the papers, you know what each one is carrying in your argument, and you are the one who has to defend it. What helps is knowing exactly which passage each claim in your chapter rests on, so you know what changes if a paper is withdrawn. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. That is the part Litrevu helps with. Add the papers you have gathered and vetted, ask what they say, and each citation in the answer opens the passage in your own library it came from. Paste a paragraph you wrote and see which of your claims your papers back, so if one paper falls you can see which sentences lean on it. Litrevu is free to start, no credit card required. Try Litrevu free Then go and run the retraction check. It is five minutes a paper, and it is the cheapest insurance in academic writing. ## Related Guides - How to Spot Fake AI Citations Before You Submit (2026 Guide) - Zotero vs Mendeley vs EndNote: Which Reference Manager Should You Use in 2026? - How to Organize Research Sources (So You Don’t Lose Your Mind) - How to Find Academic Sources for Your Research Paper (2026 Guide) --- # PRISMA Flow Diagram: How to Report Your Search URL: https://litrevu.com/blog/prisma-flow-diagram Category: Literature Review Published: 2026-07-30 Summary: How to build a PRISMA flow diagram for a systematic or scoping review. The four stages, the numbers each box needs, a recording habit that captures them while you screen, a worked example where the arithmetic adds up, how to report exclusion reasons, and what to do if you already lost the counts. Literature Review ## PRISMA Flow Diagram: How to Report Your Search By Wasim Ghoor · 30 July 2026 · 10 min read There is a moment most students hit at the end of screening. The folder is full, the decisions are made, the reading has started, and then a supervisor asks for the flow diagram. How many records did the databases return? How many duplicates came out? How many full texts did you reject, and for what reasons? The papers are all there. The numbers are not, because nobody wrote them down at the time. A PRISMA flow diagram is not a drawing exercise. It is four small counts, captured while you work, arranged so a reader can follow every record from search to inclusion. Quick answer A PRISMA flow diagram reports how many records you found and what happened to each of them, in four stages: identification, screening, retrieval and eligibility, and inclusion. Every box holds a number, and the numbers must reconcile: records screened minus records excluded equals reports sought, and so on down the chart. Record four figures as you go, records identified per database, duplicates removed, records excluded at title and abstract, and full texts excluded with reasons, and the diagram takes twenty minutes to draw. Reconstruct them afterwards and it takes a day, if it is possible at all. ## What a Flow Diagram Actually Reports PRISMA stands for Preferred Reporting Items for Systematic reviews and Meta-Analyses. It is a reporting guideline, which means it does not tell you how to do a review, only what you have to disclose about the review you did. The current version, PRISMA 2020, was published in 2021 and replaced the 2009 statement. The flow diagram is one item in a longer checklist, and it is the item readers look at first. What it discloses is attrition. You started with a large pile of search results and ended with a small set of included studies, and the diagram accounts for the difference. That accounting is what makes a review checkable. Without it, a reader has no way to tell whether you screened four hundred records carefully or skimmed forty and stopped when the argument felt full. One vocabulary note that trips almost everyone up. PRISMA 2020 distinguishes records, reports, and studies. A record is a database entry, a title and abstract in a results list. A report is the document itself, the full text you open. A study is the piece of research being described, and one study can be spread across two reports, a conference paper and a later journal article. The upper boxes count records, the lower boxes count reports and studies. Using the words loosely is the fastest way to produce a chart whose numbers cannot be made to agree. ## Do You Actually Need One? This depends entirely on the kind of review you are writing, so settle that first. A systematic review needs a flow diagram; it is close to non-negotiable, and reviewers will ask for it. A scoping review follows PRISMA-ScR, the scoping extension, which also expects a diagram of the selection process. A narrative or thematic literature review usually does not require one, and adding one does not upgrade the review. The practical differences are laid out in scoping vs systematic vs narrative review and in literature review vs systematic review . There is a middle case worth naming, because it is where most dissertation students actually sit. You are writing a narrative review, no diagram is required, but you did run a structured search. Including a simple version of the chart, or even just the counts in a sentence, is a cheap way to show a marker that your selection was deliberate. Keep it honest about what it is. A diagram on a selective review is a record of your search, not a claim that the review was systematic. ## The Four Stages, and the Number Each One Needs The chart reads top to bottom. Each stage has records flowing in, records leaving, and a smaller number continuing to the next stage. Here is what each box is asking for. Stage What it counts Capture it when Identification Records identified from each database or register, reported separately, plus records found by other methods The moment you run each search, before you export Records removed before screening Duplicates removed, records flagged ineligible by automation, records removed for any other reason Immediately after you merge exports into one library Screening Records screened on title and abstract, and records excluded at that stage As a running tally while you screen Retrieval Reports sought for retrieval, and reports you could not retrieve When you go hunting for full texts Eligibility Reports assessed on full text, and reports excluded grouped by reason with a count for each reason At the moment you reject each full text Included Studies included in the review, and the number of reports those studies are described in When screening closes Notice how many of those say “at the moment you”. That is the whole difficulty of this diagram. Not one of these numbers is hard to obtain while the work is happening, and several of them are effectively gone once you move on. ## The Recording Habit That Makes This Easy Open one spreadsheet before you run your first search and give it two tabs. The first tab is the search log, one row per database: database name, the exact string you ran, the date, any filters, and the number of hits. That tab is also the evidence for your search strategy, which is worth building deliberately rather than improvising; the method is in how to write a search strategy . The second tab is the screening log, one row per record, with a decision column and a reason column. The reason column only needs filling in when you exclude at full text, and the reasons should be the mirror image of your eligibility rules. If you have not written those rules yet, do that before screening, not during it, using how to write inclusion and exclusion criteria . Criteria written midway through screening tend to describe the papers you have already decided to keep. The four figures to protect Records identified, per database. Duplicates removed. Records excluded at title and abstract. Full texts excluded, split by reason. Every other number on the chart can be derived from those four plus your final included set. Write them in the same place every time and the diagram assembles itself. Two practical notes on duplicates. Deduplicate once, after you have merged every export into a single library, and record the count the software reports. Then check a sample by hand, because reference managers miss duplicates when a preprint and a published version carry different titles. If your library lives in Zotero, Mendeley , or EndNote, the deduplication behaviour differs between them, which is one of the differences covered in Zotero vs Mendeley vs EndNote . ## A Worked Example, Box by Box Here is a small review on remote work and employee wellbeing, with every number shown so you can see the arithmetic close. Identification Records identified from databases: Scopus 412, Web of Science 287, PsycINFO 154, Business Source Premier 98. Total 951. Records identified by other methods: citation chasing 14, organisational websites 3. Total 17. Removed before screening Duplicates removed 268. Records marked ineligible by automation, in this case a language filter, 41. Records removed for other reasons 0. Remaining 642. Screening Records screened on title and abstract 642. Records excluded 558. Reports sought for retrieval from this column 84. Retrieval and eligibility Reports sought for retrieval 101, that is 84 from the database column plus the 17 found by other methods, which arrive as full reports and so skip title and abstract screening. Reports not retrieved 6, no full text available through the library. Reports assessed for eligibility 95. Reports excluded 73: wrong population 28, no wellbeing outcome measured 22, conference abstract only 12, published before the cut-off year 11. Included Studies included in the review 22, described across 25 reports. Three studies each published twice, a preprint and a journal article. Read it back as a chain and every step reconciles. 951 plus 17 is 968 identified. In the database column, 951 minus 268 duplicates minus 41 automation exclusions leaves 642 to screen, and 642 minus 558 excluded leaves 84 reports sought. The 17 records from other methods sit in their own column in the PRISMA 2020 template and join here, so 84 plus 17 is 101 sought. 101 minus 6 not retrieved leaves 95 assessed. 95 minus 73 excluded leaves 22 studies, and the four exclusion reasons themselves sum to 73. Nothing disappears without a stated cause. That property, not the shape of the boxes, is what a reviewer is checking. ## Make the Arithmetic Add Up The most common reason a flow diagram gets sent back is that the numbers do not reconcile. Before you paste the chart into your chapter, run these four checks in order. They take two minutes and catch nearly everything. - Per-database totals sum to the identification total. If they do not, you probably re-ran one search after adding a filter and kept the old figure. - Each stage balances. Screened minus excluded equals sought within the database column, then add the records found by other methods. Sought minus not retrieved equals assessed. Assessed minus excluded equals included. - Exclusion reasons sum to the exclusion total. One record, one reason. Pick the first rule it failed rather than listing every rule it failed, or your reasons will overcount. - Studies and reports are counted separately. If 22 studies appear in 25 documents, both numbers belong in the final box, and your reference list will have 25 entries while your synthesis discusses 22 studies. ## Reporting Exclusion Reasons Well Exclusion reasons are only required at the full text stage, and that is a relief, because nobody expects you to justify 558 individual title and abstract rejections. But the reasons you do give carry weight, and vague ones invite questions. “Not relevant” tells a reader nothing. “No wellbeing outcome measured” tells them exactly which of your criteria the paper failed. Use between three and six reason categories, drawn word for word from your eligibility criteria, and give each a count. If one category swallows most of your exclusions, that is useful information rather than a problem: it usually means your search string is wider than your question, which you can note honestly in your limitations. Weak reasons Not relevant (34). Poor quality (12). Did not fit (10). Strong reasons Wrong population, sample not in employment (28). No wellbeing outcome measured (22). Conference abstract only, no full method reported (12). Published before 2015 cut-off (11). ## How to Draw It Without Losing an Afternoon Do not build the boxes from scratch. The PRISMA website publishes templates for the 2020 diagram, including a version for reviews that searched databases only and a version with a second column for records found by other methods, such as citation chasing and organisational websites. Download the one that matches your search and type your numbers into it. There are also free tools that generate the diagram from a filled-in spreadsheet, which is worth a look if you would rather not fight with text boxes. Keep the presentation plain. It goes in the methodology chapter as a numbered figure, referenced from the text, usually right after you describe screening. Same font as the rest of the document, no colour coding, no shadows. Check it exports legibly to PDF at actual size, because a diagram that is crisp on screen and blurred in the submitted file is a needless mark to lose. Where it sits relative to the rest of your method is covered in how to write a methodology section . Steal this paragraph “The study selection process is summarised in Figure [X], following the PRISMA 2020 flow diagram. Database searching identified [n] records, with a further [n] identified through citation chasing. After [n] duplicates and [n] records excluded by filters were removed, [n] records were screened on title and abstract, of which [n] were excluded. Full texts were sought for [n] reports; [n] could not be retrieved. Of the [n] reports assessed for eligibility, [n] were excluded, with reasons reported in Figure [X]. [n] studies, reported in [n] papers, met the inclusion criteria.” ## Five Ways This Goes Wrong - Leaving the counts until the end. The one mistake that causes all the others. Screening decisions are easy to recall in aggregate and impossible to recall as numbers. - Reporting one lump figure for all databases. PRISMA 2020 expects the count per source. A single total hides the possibility that one database contributed almost nothing, which is worth knowing. - Deduplicating twice. Removing duplicates before and after merging exports produces two counts and a chart that cannot balance. Merge first, then deduplicate once, then record. - Confusing reports with studies. A review of 22 studies across 25 papers is not a review of 25 studies. Collapse the duplicates into one study and say so. - Treating the diagram as decoration. It is a figure your examiner may audit against your reference list. Numbers that do not match the list you actually cite is one of the common literature review mistakes that is genuinely hard to talk your way out of in a viva. ## If You Have Already Lost the Numbers Plenty of people arrive at this page after screening rather than before it. Not all is lost, and the recovery is mostly mechanical. Re-run each search string with the same filters and record today’s hit count and today’s date, noting in your method that the reported search date is the date of this rerun. Your reference manager can usually tell you the library size before and after deduplication if the groups still exist. The included set you already have, and the excluded full texts are often still sitting in a folder you can count. What you cannot honestly reconstruct is the title and abstract exclusion count, because that number only ever existed in the act of screening. If a rerun gives you a defensible figure, use it and date it. If it does not, say plainly in your limitations that screening counts were recorded retrospectively. A stated limitation costs you very little. An invented number that a reviewer can disprove by re-running your string costs you a great deal more, and reviewers do re-run strings. ## Do This in the Next Ten Minutes Open a spreadsheet and make two tabs, search log and screening log. Put one row in the search log for every search you have already run, filling in whatever you can still recover, and leave the rest blank rather than guessing. From here on, the rule is one line per search and one line per decision, written at the moment it happens. The system does the remembering so you do not have to, and in nine months the diagram will be twenty minutes of typing instead of a lost weekend. Once the chart is settled, the counting is over and the actual work begins: reading the included studies and working out what they say together. That is a different habit, and it starts with organising your sources and then synthesising them . ## After the Counting Screening is your judgement and your paper trail, and it stays that way. The slow part is what follows: reading the studies that survived and working out what they say together. Add them to Litrevu and compare them side by side on aim, design, sample, findings and limitations, every cell cited, as a check against your own extraction table. Every answer opens to the passage it came from, so you can check it yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The argument and the writing stay yours, which is the only way a review chapter is worth anything. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution's policy and declare how you used AI. It is free to start, no credit card required, so you can try it on the studies your screening actually kept. Try Litrevu free ## Related Guides - How to Write a Search Strategy for a Literature Review - How to Write Inclusion and Exclusion Criteria (With Examples) - Scoping vs Systematic vs Narrative Review: Which Do You Need? - How to Organize Research Sources --- # How to Write a Search Strategy for a Literature Review URL: https://litrevu.com/blog/how-to-write-a-search-strategy Category: Literature Review Published: 2026-07-29 Summary: How to build a search strategy for a literature review. Break your question into concept blocks, write synonym lists, combine them with Boolean operators, pilot the string against papers you already know, translate it across databases, and report it properly. Literature Review ## How to Write a Search Strategy for a Literature Review By Wasim Ghoor · 29 July 2026 · 11 min read Most students treat searching as a hunt. You type a phrase, you see what surfaces, you save whatever looks useful, and you go back tomorrow and type something slightly different. A search strategy is the opposite of a hunt. It is a recipe: a written set of terms and rules that someone else could follow and end up holding roughly the same stack of papers you did. That difference sounds procedural, but it is what turns a pile of reading into evidence you can defend. Quick answer Break your research question into two or three concept blocks. For each block, list every word an author might have used for that idea. Join the words inside a block with OR, join the blocks with AND, and use quotation marks for phrases and a truncation symbol for word endings. Pilot the string against papers you already know should appear, adjust until it finds them, then translate it for each database and record the date searched and the number of hits. That record, not the reading, is your search strategy. ## What a Search Strategy Actually Is Ask a supervisor what they mean by search strategy and you will get a short answer: show me what you typed, where you typed it, and when. Not a description of your reading habits. The literal strings, the databases, the dates, the counts. Why so literal? Because a literature review makes a claim about a body of work, not just about the papers you happened to find. When you write that research on a topic has focused mostly on one setting, you are describing a field. The only thing standing behind that description is the method you used to look. A stated search strategy is what converts “here is what I read” into “here is what is out there, and here is how I know”. How formal it needs to be depends on the review you are writing. A systematic review specifies the full string for every database in an appendix. A narrative review might report a paragraph. Either way the work underneath is the same, and if you have not settled which kind you are producing, decide that first in scoping vs systematic vs narrative review , because it sets how much of this has to be visible. ## Step 1: Break the Question Into Concept Blocks A search string is built from your question, not from your topic. Take the question apart into the two or three ideas that a paper would have to be about to be useful to you. Those are your blocks. If your research question is sharp, the blocks fall out of it almost mechanically. Take this question: what is known about the effect of remote work on employee wellbeing in the public sector? Three blocks: remote work , wellbeing , and public sector . Two rules keep this from going wrong. Use no more than three blocks in your first string, because every block you add is another condition a paper must satisfy, and four conditions will usually strangle your results down to nothing. And leave out any block that describes your method rather than your subject: study design, date range, and language are limits, and limits belong in your inclusion and exclusion criteria where you can apply them consciously, not buried inside a string where they silently delete things. ## Step 2: Write the Synonym List for Each Block This is the step that separates a search that works from one that does not, and it is almost always the step people skip. A database does not know what you mean. It matches the characters you gave it. If an author wrote “telework” and you typed “remote work”, that paper does not exist as far as your search is concerned. So for each block, list every label a researcher might plausibly have chosen. Pull them from four places: the titles of the papers you already have, the keyword lists those papers print under their abstracts, the vocabulary your discipline uses in textbooks, and the subject headings the database itself suggests. Medical databases have a controlled vocabulary called MeSH, and other fields have their own thesauri. If yours does, use it alongside your own words rather than instead of them, since indexing lags behind new terminology by years. The three blocks, expanded - Remote work: remote work, telework, telecommut*, work from home, hybrid work, distributed work, flexible work arrangement - Wellbeing: wellbeing, well-being, burnout, job satisfaction, stress, mental health, work life balance, psychological health - Public sector: public sector, government employee*, civil servant*, public administration, municipal, local authority Notice the spelling variants sitting next to each other. British and American spellings, hyphenated and unhyphenated forms, singular and plural. These are not pedantry. They are the difference between forty results and four hundred. ## Step 3: Join Them With Boolean Operators Boolean logic has one rule worth memorising, and everything else is detail: OR inside a block, AND between blocks . OR widens, because a paper only has to match one of the alternatives. AND narrows, because a paper has to match something from each block. Get that pattern right and your string will behave predictably. Operator What it does Use it for OR Returns records containing either term Synonyms and spelling variants inside one block AND Returns only records containing both Joining one concept block to the next NOT Removes records containing a term Rarely. It deletes relevant papers that merely mention the word " " Matches an exact phrase, words in order Multi word terms like “job satisfaction” * Truncation, matches any word ending nurs* for nurse, nurses, nursing ( ) Groups terms so the logic runs in the right order Wrapping every OR block before you AND them together Field tags Limits matching to title, abstract, or keywords Cutting noise when full text search returns thousands Two cautions. Brackets are not optional: without them, a database may read your string left to right and quietly produce something you did not ask for. And NOT is the operator that causes the most invisible damage, because excluding a word removes every paper that mentions it anywhere, including good papers that mention it once in a limitations paragraph. Exclude at the screening stage, where you can see what you are throwing away. ## Weak and Strong, Side by Side Weak version effect of remote work on employee wellbeing in the public sector This is the question typed into a box. It finds whatever the ranking algorithm decides is close, in an order you cannot explain, and it can never be repeated by anyone else with the same result. It is also unreportable: there is nothing here to put in a methodology. Strong version ("remote work" OR telework OR telecommut* OR "work from home" OR "hybrid work") AND (wellbeing OR well-being OR burnout OR "job satisfaction" OR stress OR "work life balance") AND ("public sector" OR "civil servant*" OR "government employee*" OR "public administration") Three blocks, each bracketed, each internally joined by OR, the blocks joined by AND. Phrases quoted, endings truncated, spellings covered. Someone in another country could paste this into the same database next week and see what you saw. The strong version is longer and uglier, and that is the trade you are making. Readability is not the goal. Reproducibility is. ## Step 4: Pilot It Against Papers You Already Know Here is the test that almost nobody runs, and it takes ten minutes. Pick three or four papers you already know are squarely on your topic, the ones you would be embarrassed to have missed. Run your string. Does it return them? If it does not, you have learned something specific and fixable. Open one of the missing papers, read its title, abstract, and keyword list, and find the word you did not have. Add it to the relevant block and run again. That loop, repeated three or four times, does more for a search than another afternoon of browsing. Then read the count. There is no correct number, but there are two clear signals. Thousands of hits usually means a block is too broad or you are searching full text rather than title and abstract: restrict the fields, or tighten the vaguest block. Under twenty hits usually means you have too many blocks or too few synonyms: drop the third block and see what happens, since the block you dropped can be applied by eye during screening. Aim for a set you can actually screen, and remember that you are trading precision against recall every time you touch the string. ## Step 5: Translate It for Each Database A string is not portable. Truncation is an asterisk in some databases and a different symbol in others. Field tags differ. Google Scholar ignores most syntax entirely, caps Boolean handling, and has no way to export a clean result count, which is why it is a fine place to start and a poor place to finish. Search two or three subject databases your library subscribes to, and treat Scholar as a supplement rather than the record. Which databases suit your field is covered in how to find academic sources . Whatever you run, record it as you go, in a table with one row per database: database name, the exact string you used, any field limits, the date you searched, and the number of results. Rebuilding that table three months later from browser history is a special kind of misery, and the date matters because databases keep growing, so a search run in March and a search run in August are genuinely different searches. Export the results straight into a reference manager rather than bookmarking them. It handles the duplicate removal you will otherwise do by hand across four overlapping databases, and it gives you the deduplicated count your flow diagram needs. If you have not set one up, Zotero, Mendeley , and EndNote compared covers the choice, and organising your research sources covers what to do with everything once it lands. ## Step 6: Search Beyond the String A database search finds papers that used your words. It will still miss work that framed the same idea differently, and the fix is to follow citations rather than keywords. - Backward chaining. Take the two or three most relevant papers you found and mine their reference lists. This walks you back to the foundational work in your area, which is often too old or too differently worded for your string to catch. - Forward chaining. Look at who has cited those papers since. This is how you find the most recent work, and it is the fastest route to seeing where the conversation has moved. - Hand searching key journals. If two journals keep appearing in your results, browse their last few years of contents directly. - Grey literature. Theses, government reports, and working papers, where your field and your review type expect them. Note where you looked. Citation chasing is also where research gaps start to become visible, because you begin to see which questions everyone cites and nobody has answered. That is the raw material for finding a research gap . ## How to Report It in Your Chapter The search strategy sits early in your methodology section , just before your eligibility criteria and screening process. A systematic review puts the full string for every database in an appendix. For most dissertation chapters, a paragraph plus a table is the right weight. How much detail your review type demands is the practical difference set out in literature review vs systematic review . Steal this paragraph “Searches were conducted in [databases] on [date]. The strategy combined three concept blocks, [block 1], [block 2], and [block 3], with synonyms and truncated variants joined by OR within each block and the blocks combined with AND. Searches were limited to title, abstract, and keyword fields. The full strings for each database appear in Appendix [X]. Database searching returned [n] records, reduced to [n] after duplicate removal. Reference lists of included studies and forward citation searches identified a further [n] records.” Report the numbers even if nobody demands them. Records identified, duplicates removed, records screened, and full texts assessed are four figures that take seconds to note as you go and are close to unrecoverable later. They are also exactly what a flow diagram needs. ## Five Ways This Goes Wrong - Searching the topic instead of the question. A string built from a broad topic returns a field. A string built from a question returns a conversation you can join. - One synonym per block. The single most common cause of a thin literature review. If a block has one word in it, you are searching for one research community and missing the others working on the same thing. - Missing brackets around OR groups. The results look plausible, which is what makes this dangerous. Bracket every block, every time. - Never writing anything down. If your strategy exists only in your search history, you do not have a strategy. You have an afternoon you cannot repeat. - Stopping at the first search. A first string is a draft. Two or three rounds of piloting and revising is normal practice, not a sign that you did it wrong. Several of the common literature review mistakes start here. ## Do This in the Next Hour Write your question on one line. Underline the two or three ideas a paper must be about. Give each one its own row and fill that row with every word an author might have used, pulling from the keyword lists of the papers you already have. Bracket each row, put OR between the words and AND between the rows, and run it. Then check whether it finds the papers you already know. That is a search strategy, and it took less time than the browsing session it replaces. Once the strategy is set and screening is done, the work changes shape entirely. You stop looking for papers and start working out what they mean together, which is where grouping them into themes and synthesising them begins. ## After the Search Designing the search and deciding what passes is your judgement, and it stays that way. The slow part is what comes next: reading the papers your string returned and working out what they say together. Add them to Litrevu and ask what they found, see the themes they share and where they disagree, and compare their methods side by side. Every answer opens to the passage it came from, so you can check it yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The argument and the writing stay yours, which is the only way a review chapter is worth anything. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution's policy and declare how you used AI. It is free to start, no credit card required, so you can try it on the papers your search actually found. Try Litrevu free ## Related Guides - How to Find Academic Sources for Your Research - How to Write Inclusion and Exclusion Criteria (With Examples) - Scoping vs Systematic vs Narrative Review: Which Do You Need? - How to Write a Literature Review --- # How to Write Inclusion and Exclusion Criteria (With Examples) URL: https://litrevu.com/blog/how-to-write-inclusion-and-exclusion-criteria Category: Literature Review Published: 2026-07-28 Summary: How to write inclusion and exclusion criteria for a literature review or systematic review. The six dimensions to build them on, a six-step process, a weak vs strong worked example, wording you can copy, and how to screen without losing the paper trail. Literature Review ## How to Write Inclusion and Exclusion Criteria (With Examples) By Wasim Ghoor · 28 July 2026 · 10 min read There is a folder on your laptop with 180 PDFs in it. You saved every one of them because the title looked relevant at the time. Now you are trying to write a chapter, and you cannot remember why half of them are there, or which ones you decided against and which you simply have not opened yet. That is not a reading problem. It is a missing rule. Inclusion and exclusion criteria are that rule, written down once so that you stop making the same decision from scratch every time you open a new abstract. Quick answer Inclusion criteria describe the studies that belong in your review. Exclusion criteria describe the ones that do not, and they are not simply the opposite of the first list. Together they are your eligibility criteria. Write them before you screen anything, base them on six dimensions (population, concept, context, study design, time window, and source type), give a reason for each, and record which criterion knocked out each paper you reject. They belong in your methodology, and they are what makes your selection defensible rather than convenient. ## What Criteria Are Actually For An examiner reading your literature review has one quiet question running the whole time: how did you decide what to include? Without stated criteria, the honest answer is usually “whatever came up first and looked useful”, and that is the answer they will assume. Criteria replace that with something you can point at. They turn a pile of papers into a sample, and a sample is something you can defend. They also do something kinder, which is to protect your time. A criterion set is a decision you make once and then apply two hundred times. Screening an abstract stops being a small act of judgement that costs you five minutes of second guessing and becomes a lookup: does this meet the rule, yes or no. The system does the remembering, so you do not have to hold your reasoning in your head across three weeks of reading. How formal your criteria need to be depends on the kind of review you are writing. A full systematic review needs them specified in a protocol before you search. A scoping review needs them stated up front but broader. A narrative review still benefits from them, even if you describe them in a paragraph of prose rather than a table. If you have not settled that question yet, start with which review type you need , because it sets how strict this has to be. ## Inclusion and Exclusion Are Not Mirrors This is the most common misunderstanding, and it produces tables that say things like “include: peer reviewed. exclude: not peer reviewed.” That row carries no information. If every exclusion criterion is the negation of an inclusion criterion, you have written one list twice. Inclusion criteria define the boundary of your topic. Exclusion criteria remove studies that fall inside that boundary but still cannot be used. A paper can be about your population, your concept, and your context, and you still exclude it because it is a conference abstract with no method section, or because it reports the same dataset as a study you have already included, or because the full text does not exist in a language you read. Those are exclusions. They are not the opposite of anything. A quick test Read each exclusion criterion and ask whether a paper could meet every one of your inclusion criteria and still be caught by it. If the answer is no, delete the row. You are repeating yourself, and the repetition makes the table look longer than your thinking actually is. ## The Six Dimensions to Build Them On Most criteria sets that go wrong are missing a dimension rather than getting one wrong. Work through these six in order and you will not leave a gap that surfaces halfway through screening. Dimension The question it answers Why you need it Population Who or what was studied Findings about one group rarely transfer cleanly to another Concept Which variable, intervention, or phenomenon Keeps you from collecting everything that shares a keyword Context Setting, sector, or country Usually the criterion that carries your contribution Study design Empirical, review, theoretical, which methods Decides whether your studies can be compared at all Time window Publication years, and why those years Needs a reason, not a round number Source type Peer reviewed, theses, reports, language Sets the quality floor and admits your practical limits If your field uses PICO (population, intervention, comparison, outcome) or PCC (population, concept, context), you will recognise the first three. Use whichever framework your discipline expects and treat the last three as the additions that make it operational. The time window is the one students most often state without justifying. “2015 to 2026” is not a criterion until you say what happened in 2015 that makes earlier work a different conversation. ## A Six Step Process - Write your research question on one line. Every criterion should trace back to a word in it. If a criterion has no anchor in the question, either the question is incomplete or the criterion is your preference in disguise. A well built research question does most of this work for you. - Fill in the six dimensions, inclusion side first. One line each, written as a property a paper either has or does not have. Avoid words that need a judgement call, like “recent”, “relevant”, or “high quality”. - Add exclusions that survive the mirror test. Duplicate reports of one dataset, full text unavailable, editorials and commentary, wrong outcome measured. Only rows that catch something your inclusion list would otherwise let through. - Write the reason next to each one. A single clause is enough. You will paste these into your methodology later, and writing them now is how you notice that one of your criteria has no reason behind it. - Pilot on twenty abstracts. Screen a sample before you commit. If you hesitate on more than two or three, a criterion is ambiguous and needs rewording. This step takes half an hour and saves days. - Lock them, then log every change. Criteria can be revised, but the revision has to be visible. Note what you changed, when, and why. Silent changes midway through screening are what make a selection look shaped to fit the argument. ## Weak and Strong, Side by Side Take a question a lot of dissertations look like: what is known about the effect of remote work on employee wellbeing in the public sector since the pandemic? Weak version - Include: recent studies about remote work - Include: relevant, high quality, peer reviewed sources - Exclude: old studies - Exclude: sources that are not peer reviewed Nobody, including you in three weeks, can apply this consistently. “Recent” and “relevant” are decisions, not criteria, and two of the four rows are the same rule stated twice. Strong version - Population: employed adults in public sector or government organisations. Reason: the question is about public sector conditions, and private sector autonomy differs. - Concept: studies reporting at least one measured wellbeing outcome (stress, burnout, job satisfaction, work life balance) alongside a remote or hybrid working arrangement. - Context: any country, with country recorded for each study so patterns by region can be described. - Design: primary empirical studies, quantitative, qualitative, or mixed methods. Reason: the review synthesises evidence, so other reviews are read for context but not included as data. - Time window: published 2020 onward. Reason: the pandemic shifted remote work from a minority arrangement to a default, so earlier findings describe a different population of remote workers. - Source type: peer reviewed journal articles and completed doctoral theses, full text available in English. - Exclusions: conference abstracts without a method section; opinion pieces and editorials; studies where remote work is mentioned but not linked to a wellbeing outcome; duplicate reports of a dataset already included, keeping the fullest report. The strong version is longer, and that is the point. Every line either answers a question an examiner would ask or stops you relitigating a decision. Notice too that the exclusions catch papers the inclusions would have admitted, which is exactly what exclusions are for. ## How to Word Them in Your Chapter Criteria live in your methodology section , usually right after the search strategy and before the screening process. A table plus a short paragraph is the standard treatment, and a narrative review can compress the whole thing into one honest paragraph. Steal this paragraph “Studies were eligible if they [population criterion], reported [concept criterion], and were published from [year] onward, a boundary chosen because [reason]. Only [source types] were considered, and [design] studies were included because the review sets out to [purpose]. Studies were excluded where [exclusion 1], [exclusion 2], or [exclusion 3]. Criteria were set before screening began and applied to titles and abstracts first, then to full texts.” Two habits of phrasing are worth keeping. Write criteria as properties of the study rather than instructions to yourself: “studies published from 2020 onward” instead of “I only looked at papers after 2020”. And keep the reason attached to the criterion, not gathered into a separate paragraph at the end, so a reader never has to hold an unexplained rule in their head. ## Screening Without Losing the Paper Trail Criteria only pay off if you record what they did. Screen in two passes: titles and abstracts first, then full texts for whatever survives. The first pass is fast and generous, because an abstract often will not tell you the sample size or the outcome measure. When in doubt at that stage, keep it and let the full text decide. Keep one spreadsheet with a row per record and these columns: identifier, author, year, title, source, screening decision, and the criterion that excluded it. That last column is the one people skip and then regret, because a count of exclusions with no reasons cannot become a flow diagram. If you already have a system for organising your research sources , add the columns there rather than starting a second file. Record four numbers as you go: records identified, duplicates removed, records screened and excluded at title and abstract, and full texts assessed with exclusions by reason. Those four numbers are the whole flow diagram, and reconstructing them afterwards from memory is close to impossible. A systematic review reports them formally against PRISMA ; even a narrative review looks much stronger for a sentence like “of 214 records identified, 38 met the criteria”. The difference between review types on this point is covered in literature review vs systematic review . ## Five Ways This Goes Wrong - Writing the criteria after the reading. Criteria reverse engineered from the papers you already like will always fit perfectly, and a supervisor can usually tell. Write them first, even roughly, and revise them in the open. - Criteria that need a judgement call. If applying a criterion requires you to decide whether something is “important” or “good”, two people will screen the same abstract differently, and so will you on two different days. - Criteria so narrow that nothing survives. Ending up with four papers is usually a criteria problem, not a literature problem. Widen the context or the design before you widen the concept, since the concept is what your review is about. - Excluding by convenience and calling it method. Language and full text availability limits are legitimate and extremely common. State them as limitations rather than dressing them up as methodological choices, and note what they might have cost you. - Criteria that never reappear. If your discussion says nothing about how your boundaries shaped your findings, the criteria were paperwork. Come back to them when you write limitations. Several of the common literature review mistakes trace back to this one. ## Do This Before Your Next Search Open a blank page and write six lines, one per dimension, with a reason clause on each. Add three or four exclusions that survive the mirror test. Then screen twenty abstracts against them and fix whichever line made you hesitate. That is under an hour, and it is the difference between a folder of PDFs and a defensible sample. Once your criteria are settled, the papers that pass are the ones you actually have to read, and the work shifts to what they mean together. That is where grouping them into themes and synthesising them begins, and where a well specified set of criteria quietly makes a research gap easier to see. ## After the Screening Deciding what belongs in your review is your judgement, and it stays that way. The slow part is what follows: reading the papers that passed and working out what they mean together. Add them to Litrevu and compare their samples, designs and findings side by side, or ask where they agree and disagree. Every answer opens to the passage it came from, so you can check it yourself, including whether a paper really meets your criteria. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The argument and the writing stay yours, which is the only way a review chapter is worth anything. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution's policy and declare how you used AI. It is free to start, no credit card required, so you can try it on the papers that made it through your criteria. Try Litrevu free ## Related Guides - Scoping vs Systematic vs Narrative Review: Which Do You Need? - How to Find Academic Sources for Your Research - How to Write a Literature Review - How to Organize Your Research Sources --- # Scoping vs Systematic vs Narrative Review: Which Do You Need? URL: https://litrevu.com/blog/scoping-vs-systematic-vs-narrative-review Category: Literature Review Published: 2026-07-28 Summary: The difference between a scoping review, a systematic review, and a narrative literature review. What question each one answers, a side by side comparison, a five-question decision path, one topic written three ways, and how to check what your supervisor wants. Literature Review ## Scoping vs Systematic vs Narrative Review: Which Do You Need? By Wasim Ghoor · 28 July 2026 · 11 min read Here is a question worth asking before you read a single paper: what are you trying to find out? Students tend to treat review type as a label they will attach at the end, once the reading is done. It is the opposite. The type you choose decides which papers you are allowed to use, how you are meant to search, and what the finished chapter is even claiming. Choose it late and you will do the reading twice. Quick answer A narrative review builds an argument out of the literature you judge to be relevant. A scoping review maps what research exists on a broad topic, using a reproducible search but no formal quality appraisal. A systematic review answers one narrow question by finding, appraising, and synthesising all the eligible evidence, following a protocol set in advance. Most master’s dissertations want the first one. ## Three Reviews, Three Different Questions Think of a city you do not know yet. You could draw a map of every road and district, so anyone can see how the place is laid out and where nobody has built anything. You could measure one junction precisely, counting every car, so a planner can decide whether to install a traffic light. Or you could tell the story of how the neighbourhood came to be the way it is, and argue about what it should become next. Those are your three reviews. Scoping draws the map. Systematic measures the junction. Narrative tells the story and takes a position. All three are legitimate research activity, and none of them is a lesser version of another. They fail only when you pick one and then write another: a narrative review that pretends to be exhaustive, or a scoping review that quietly starts recommending a treatment. Notice that the difference is not effort or word count. It is the shape of the question. A question beginning “what research exists on” points to scoping. A question beginning “does X improve Y” points to systematic. A question beginning “how should we understand” points to narrative. If you have not settled your research question yet, settle it first, because it chooses the review type for you. ## Side by Side Feature Narrative Scoping Systematic Question How should we understand this topic What research exists, and where is the gap Does X affect Y, and by how much Scope Broad, author defined Broad, deliberately Narrow, tightly specified Search strategy Selective, guided by relevance Documented search strings, several databases Exhaustive and documented, protocol first Inclusion criteria Implicit, explained in prose Stated up front, broad Stated up front, strict Quality appraisal Not formally required Usually not, by design Required, with a risk of bias tool Synthesis Thematic and interpretive Descriptive mapping, often charted Structured, sometimes meta-analysis Reporting guideline None standard PRISMA-ScR PRISMA 2020 Reviewers One Two for screening where possible Two or more, standard Typical timeline Weeks to a few months Two to six months Six to eighteen months Where you meet it Dissertation chapters, proposals Emerging fields, funding scoping work Health sciences, evidence-based policy Timelines here are the usual ranges, not rules; a scoping review of a small field can be quicker, and a systematic review with a large evidence base can run longer. For the two-way version of this comparison in more detail, see literature review vs systematic review . ## The Narrative Review This is the review almost every dissertation actually contains. You read widely, decide what matters, group the work into themes, and argue your way to the point where your own study becomes necessary. Selection is your judgement, and you defend it in prose rather than in a flow diagram. Its reputation suffers because a bad one is easy to spot: a string of summaries, one paragraph per paper, no position taken. But that is a failure of execution, not of the method. A strong narrative review is the hardest of the three to write well, because nothing external tells you what to include, and the whole value sits in the synthesis . Summary reports what each study said. Synthesis says what the studies say together, and where they contradict each other. Choose it when your review has to set up an empirical study, when the literature is heterogeneous enough that pooling results would be meaningless, or when your question is conceptual. In practice, the structure is thematic: organising by theme is what separates a narrative review from an annotated reading list. Be honest about the label A narrative review should never claim completeness. Write “this review draws on the major strands of work on”, not “all studies on”. Overclaiming your coverage is the one thing an examiner will catch immediately, and it is entirely avoidable. ## The Scoping Review A scoping review asks what is out there. It uses systematic machinery, documented search strings across named databases, stated inclusion criteria, a record of what was screened, but it points that machinery at a broad question and usually skips formal quality appraisal. The output is a map: how much research exists, what kinds of study designs, which populations, which outcomes, and where the blank spaces are. Why would you not appraise quality? Because the question is not “is the evidence good enough to act on”. It is “what has been done at all”. Excluding weak studies would hide part of the map. That is also why a scoping review cannot conclude that an intervention works. It can conclude that eleven studies exist, nine of them in one country, none of them longitudinal, which is often the more useful finding for a student. Choose it when the field is new or scattered, when your supervisor wants a defensible case that a research gap genuinely exists, or when you need to know whether a full systematic review is even feasible. Scoping reviews are reported against PRISMA -ScR, the scoping extension of the PRISMA statement, and the widely used methodological guidance comes from JBI. Expect to include a search log and a screening flow diagram in your appendices. Getting your database searches right matters more here than anywhere else, so read up on finding academic sources before you begin. ## The Systematic Review A systematic review is a study in its own right, and the literature is its dataset. You write a protocol before you search, ideally registered, specifying the question, the databases, the search strings, the eligibility criteria, and how disagreements between reviewers will be resolved. Then you follow it. The test is reproducibility: another researcher running your method next month should arrive at the same set of included studies. Every included study gets appraised with a risk of bias tool, and findings are synthesised in a structured way. Where the studies are similar enough in design, population, and outcome measure, that synthesis may include a meta-analysis, which pools the results statistically. Where they are not similar enough, you synthesise narratively and say why pooling was inappropriate. Reporting follows PRISMA 2020, and in health research the Cochrane Handbook is the usual reference for methods. Choose it when your question is narrow and answerable, when a body of comparable studies exists, when you have a second screener, and when your timeline is measured in months rather than weeks. Two of those four conditions are the ones students underestimate. Screening several thousand abstracts alone is how a promising dissertation becomes an overdue one, and if the protocol is your method, it belongs in your methodology section , not tucked into the literature chapter. ## A Decision Path (Five Questions) Answer these in order and stop at the first one that decides it. - Has your department specified a type or a guideline? If the handbook names PRISMA, a protocol, or two screeners, the decision is made for you. Check the marking rubric before anything else, because rubrics are more specific than supervisors. - Is the review the whole project, or the run-up to one? If you are collecting your own data afterwards, the review is the run-up, and a narrative review is almost always what is wanted. If the review is the entire contribution, you need scoping or systematic. - Can you state your question in one sentence with a measurable outcome? “Does peer mentoring reduce first-year dropout” is systematic-shaped. “How has peer mentoring been studied” is scoping-shaped. If neither fits, your question is conceptual, which is narrative-shaped. - Do enough comparable studies exist? Run one quick search. Under about fifteen studies, or wildly different designs and outcome measures, a systematic review has little to synthesise; map the field with a scoping review instead. - What do you actually have: time, and a second pair of eyes? A solo systematic review on a three-month timeline is not a brave choice, it is a scoping review that will be marked as a failed systematic review. Pick the method your resources support and defend that choice in writing. ## One Topic, Written Three Ways Take a single subject: mobile learning apps and language retention. Here is what each review type does with it, and how different the finished claim looks. Narrative Question: how has the field explained why app-based learning sometimes fails to produce lasting retention? Sections follow themes: measurement disagreements, motivation and habit, the role of spacing, and who the evidence is about. Claim: retention findings diverge largely because studies measure it at different intervals, and that is the gap this study enters. Scoping Question: what research exists on mobile language apps and retention, and how has it been conducted? Method: four databases, stated search strings, 2015 onwards, all designs included, screening logged. Claim: thirty-eight studies exist, thirty-one measured retention within two weeks, two ran beyond six months, and none covered adult learners in low-resource settings. Systematic Question: do spaced-repetition apps improve vocabulary retention at eight weeks compared with massed practice, in university students? Method: protocol first, randomised and quasi-experimental designs only, two screeners, risk of bias appraised, PRISMA 2020 flow diagram. Claim: across fourteen eligible trials, spaced practice showed a modest advantage, with the confidence weakened by small samples and short follow-up. Read those three claims again. Only one of them is a statement about effectiveness, and it is the one that paid for the right to make it with a protocol, two screeners, and appraisal. The scoping claim is about the shape of the evidence. The narrative claim is an interpretation. Match your claim to the work you actually did, and the review will hold up in a viva. ## What Your Supervisor Probably Means “Do a systematic literature review” is used loosely, and it causes a lot of wasted months. Sometimes it means a full systematic review with a protocol. Far more often, especially outside the health sciences, it means “be systematic about how you search, and show me your method”, which is a narrative review with a documented search. Those two readings differ by roughly a year of work, so it is worth thirty seconds of clarifying. Ask it as a specific question rather than an open one. Something like: “For this chapter, do you expect a registered protocol, two screeners, and formal quality appraisal, or a thematic review with a documented search strategy?” The answer settles the review type, the timeline, and the word count in one go. Send it by email so you have it in writing. It is also worth checking length expectations at the same time, since they differ sharply by type and by degree level. Our guide on how long a literature review should be gives the usual proportions. ## Five Ways This Goes Wrong - Deciding the type after the reading. A search you did not document cannot be turned into a systematic one later. You would have to search again, properly, and log it. - Borrowing systematic vocabulary for a narrative review. Adding a PRISMA diagram to a selective review does not make it systematic. It makes the mismatch obvious. - Drawing conclusions your method cannot support. A scoping review that ends by recommending an intervention has skipped the appraisal step that would justify the recommendation. - A systematic question that is far too broad. “Does technology improve learning” is not answerable. Narrow the population, the intervention, the outcome, and the timeframe until the question fits one sentence. - Choosing prestige over fit. Systematic reviews are not marked higher for being systematic. They are marked on whether the method fits the question and was carried out properly. Several of the other common literature review mistakes start with this one. ## Before You Read Another Paper Write your question on one line. Underneath it, write the review type you think it implies, and one sentence on why. Then send the clarifying email to your supervisor. That is twenty minutes of work, and it protects the next three months of it. Whichever type you land on, start the log now: a row per source with author, year, design, population, and finding. A narrative review turns that log into themes. A scoping review turns it into a chart. A systematic review turns it into an evidence table. Same discipline, three destinations. If you want to see a finished chapter first, our literature review example walks through one end to end. ## Once the Type Is Settled Choosing the review type is a judgement call, and it stays yours. The slow part comes after: working out what a folder of papers says together. Add them to Litrevu to see the themes across them and where they disagree, compare their designs and findings side by side, or ask a question across the whole set. Every answer opens to the passage it came from, so you can check it yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The argument and the writing stay yours, which is the only way a review chapter is worth anything. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution's policy and declare how you used AI. It is free to start, no credit card required, so you can try it on your own sources. Try Litrevu free ## Related Guides - Literature Review vs Systematic Review: What’s the Difference? - How to Write a Literature Review - How to Structure a Literature Review by Theme - How to Find a Research Gap in the Literature --- # How to Structure a Literature Review by Theme (With Examples) URL: https://litrevu.com/blog/how-to-structure-a-literature-review-by-theme Category: Literature Review Published: 2026-07-27 Summary: How to organise a literature review by theme instead of source by source. How to find your themes, a 6-step process, a worked before and after example, how many themes to use, and the mistakes to avoid. Literature Review ## How to Structure a Literature Review by Theme (With Examples) By Wasim Ghoor · 27 July 2026 · 12 min read · Updated 15 November 2026 A thematic literature review groups studies by recurring idea, not by author or date, with one section per theme that compares every study on that theme. Plan two to three themes for an undergraduate review, three to four for honours and four to six for a master’s, then order the themes so the last one leads straight to your research gap. Definition: thematic literature review. A thematic literature review is a literature review organised around the ideas, debates and questions that recur across the research, with each section bringing together every study on one idea, whether the studies agree or not. The idea is the unit of organisation; the papers are the evidence inside each section. The quick test. Read your section headings on their own. If the headings are author names or study titles, you have a source-by-source review. If the headings are ideas, tensions or questions, you have a thematic literature review. ## What is a thematic literature review? A thematic literature review organises the chapter by theme, so each section covers one recurring issue in the research and compares every study that speaks to that issue. The University of Westminster’s library guide puts the rule plainly: the body of a literature review “should NOT be organised author/source by author/source” but “by theme/topic presenting a synthesis of the sources” ( University of Westminster ). Think of a source-by-source review as a row of witness statements read out one after another. A thematic literature review is the cross-examination: the witnesses who saw the same event are put in the same room, and the reader hears where their accounts match and where they do not. That comparison is what synthesis means, and a thematic structure is what makes synthesis possible on the page. The University of Kent’s guide calls the thematic approach “a slightly more creative (and interesting) way of producing the review”, grouping “key ideas, facts, concepts or approaches together”, and warns that a thematic review is “a little more risky as it is harder to establish coherence and logical sequencing” ( University of Kent ). A six-step process that builds themes from your own reading, ending on the theme closest to your study, is the way to manage that risk. ## How do you structure a literature review by theme, step by step? Structure a literature review by theme in six steps: record every source in one table, read down the findings to spot recurring ideas, name each idea as a theme, tag every source to a theme, merge or split themes until each one carries real weight, and order the themes from broad to specific so the last theme leads to your gap. Themes are built from what you have read, not decided in advance. The six steps of structuring a literature review by theme Step What you do Why the step exists 1. Make one row per source Build a table with author, year, what was studied, method, main finding and a one-line conclusion for every source. The chapter is built from a record rather than from memory, so you never reopen a PDF to remember what a paper said. 2. Read down the columns Scan the findings column on its own and note what keeps coming back: the same variable, the same population, the same disagreement. Reading across a row tells you about one study. Reading down a column tells you about the field. 3. Name candidate themes Write each recurring idea as a short phrase of roughly six to ten words that contains a claim or a tension. “Disagreement about whether training effects last” is a theme; “training” is only a topic, with nothing to argue. 4. Tag every source Go back through the table and tag each row with a theme. A paper that fits two themes gets two tags. Tagging is a coverage check: it shows which themes carry real evidence and which rest on one paper. 5. Merge, split and cut Fold a theme with one or two sources into a bigger theme, split a theme holding far more sources than the others, and set aside sources that fit nowhere. Each section ends up with enough studies to compare, and no section becomes a dumping ground. 6. Order the themes Sequence the themes from the broadest to the most specific, ending on the theme closest to your own study. The final theme hands the reader to your gap and your research question . Step 6 follows university guidance. The University of Sheffield advises students to “organise relevant sources thematically, starting with the more general, broader themes”, adding that the themes “should get progressively more specific and closer to the focus of your research” ( University of Sheffield ). Sheffield Hallam University’s guide asks students to “introduce the gap towards the end of the literature review” and to add a subheading “every time you find yourself moving onto a different theme” ( Sheffield Hallam University ). Step 1 is the same table as a literature review matrix. If you keep an annotated bibliography , most of the table already exists, and Litrevu’s free literature review matrix, linked at the end of this guide, builds the table from your own PDFs. ## What does a thematic literature review look like? A thematic literature review outline has headings that state ideas, while a source-by-source outline has headings that name papers. The illustration below uses one invented topic, remote work and team productivity with around thirty sources, and shows the same reading organised both ways. The headings are a format illustration only: the placeholders stand in for real studies and no findings are implied. Before: source by source (format illustration) - 2.1 (Author A, Year) - 2.2 (Author B, Year) - 2.3 (Author C and Author D, Year) - 2.4 (Author E, Year) - 2.5 Summary of the literature After: by theme (format illustration) - 2.1 How productivity has been measured, and why the measures disagree - 2.2 Autonomy as the proposed mechanism - 2.3 Communication cost and the coordination penalty - 2.4 Which workers and settings the studies sampled - 2.5 What remains untested, and where this study enters In the “before” outline, every section is a summary, nothing is compared, and the final summary section has to do all the thinking at once. In the “after” outline, Author A and Author E may both appear in 2.1 and again in 2.3, in different roles. Section 2.4 is about the shape of the evidence base rather than about findings, and section 2.4 quietly sets up the gap that section 2.5 names. The outline carries the argument, so the prose only has to explain the argument. For a complete chapter written this way, see the literature review example . ## Thematic, chronological or methodological: which structure should you use? Use a thematic structure for most dissertation and thesis literature reviews, a chronological structure when the point of the review is how thinking changed over time, and a methodological structure when the studies differ mainly in how they were done. Lesley University Library describes all three and notes that a chronological review can follow publication order or follow trends over time ( Lesley University Library ). Thematic, chronological and methodological literature review structures compared Structure How sections are organised Use the structure when Main risk Thematic One section per recurring idea, debate or question, with every relevant study compared inside each section The reader needs to know what the field shows and where the field disagrees (most dissertations and theses) Weak sequencing between themes, the coherence risk the University of Kent names Chronological Sections follow publication dates, or follow how a trend developed over time A series of studies were written in response to one another, or a concept genuinely changed over time Turning into a timeline of summaries with no comparison Methodological Sections group studies by method or design, for example surveys, trials, interviews The studies’ methods explain why the findings differ Saying little about what the findings mean together The structures can be mixed. The University of Westminster’s guide notes that some paragraphs “can be organised chronologically (for example outlining the development of an idea throughout time)”, or “by method, by sector, or other criteria”, inside a review that is thematic overall ( University of Westminster ). A common mix is a thematic chapter in which one theme traces how a key concept developed over time. ## How many themes should a literature review have? A literature review usually needs two to three themes at undergraduate level, three to four at honours level and four to six at master’s level. These counts are Litrevu’s planning figures, scaled to the word counts in our guide to literature review length . None of the university guides read for this article (Westminster, Sheffield, Sheffield Hallam, Kent, Lesley and Dublin Business School) sets a number of themes, so your supervisor’s guidance comes first. Themes to plan by level, scaled to typical literature review length (Litrevu planning figures) Level Typical literature review length Themes to plan Undergraduate dissertation No more than about 2,000 words (University of Kent) 2 to 3 Honours thesis About 2,400 words in a 12,000-word thesis (20% share) 3 to 4 Master’s dissertation Around 2,000 to 3,000 words (University of Kent); 3,000 to 4,000 at 20% of 15,000 to 20,000 words 4 to 6 The word counts come from the University of Kent’s guide , which says an undergraduate review “may be no more than 2,000 words” and a master’s review “may be around 2-3,000 words”, and from the 20% share used in the literature review length guide. A PhD literature review, which Kent puts at “perhaps 8-10,000 words” for one chapter, has no settled theme count; a PhD chapter often groups its themes under a few larger parts. Two signs show the count is wrong. A theme that will not stretch past one paragraph is a sub-point of another theme. A theme that holds most of your sources is usually two themes sharing one heading. For length, divide the literature review’s word budget by the number of themes, then let the theme closest to your own study run longer than the rest, since Dublin Business School’s guide notes that you “spend most time discussing those studies because they have most direct relevance to your research” ( Dublin Business School ). ## How do you write a paragraph inside a theme? Write each paragraph inside a theme by opening with the claim the studies support, grouping the studies that agree into one cited sentence, explaining where and why studies disagree, and closing with what remains unresolved. Dublin Business School’s guide asks students to “use each of your headings (themes) to compare and contrast the differing views put forward in the relevant studies” ( Dublin Business School ). A thematic outline does not guarantee thematic writing. Plenty of chapters have good thematic headings and then fall back to one paragraph per paper underneath them. Four habits keep a theme section thematic: - Open with the claim, not the citation. State what the body of work on the theme broadly shows, then bring in the studies as support. If the first words of the paragraph are an author’s name, rewrite the sentence. - Group the agreement. Several studies pointing the same way belong in one sentence with a shared citation, for example “(Author A, Year; Author B, Year)”, not in three sentences that say nearly the same thing. - Give the disagreement room. Where results conflict, say so plainly and say why if you can: different samples, different measures, different time horizons. The paragraph explaining a conflict is often the most valuable paragraph in a literature review. - Close with the residue. End each theme with one or two sentences on what is still unresolved. The University of Sheffield’s guide says each section “will describe that theme and finish by summarising your overview of a theme” ( University of Sheffield ). Across the chapter, those closing sentences become the rationale for your study. ## What are common mistakes in a thematic literature review? The most common mistake in a thematic literature review is thematic headings with author-by-author paragraphs underneath, which the University of Westminster’s guide rules out when it says a review “should NOT be organised author/source by author/source” ( University of Westminster ). Five mistakes, with the fix for each: Five common mistakes in a thematic literature review, how to spot each one, and the fix Mistake How to spot the mistake Fix Themes that are really topics You cannot disagree with the heading. “Motivation” is a topic; “Whether motivation survives once the incentive is removed” is a theme. Rewrite each heading so the heading states a claim, a tension or a question. Headings by theme, paragraphs by author The section runs study summary, study summary, study summary. Rewrite the section around claims, with studies cited as evidence. A theme built on one source Only one paper is tagged to the theme. Fold the theme into a bigger theme, or read more before promoting the theme to a section. Overlapping themes You cannot decide which of two sections a paper belongs in. Redraw the boundary between the two themes, or merge them. No path to your study The themes could be read in any order, and the gap appears nowhere. Order themes from broad to specific and name the gap near the end, as Sheffield Hallam University’s guide advises. Several of the other common literature review mistakes trace back to the last row: a review with no path to the study reads as a tidy survey with no reason to exist. ## How do you find themes across your papers with an AI assistant for writing backed by sources? An AI assistant for writing backed by sources can check your candidate themes against your own papers: you ask which papers speak to a theme, read the cited passages, and line the papers up in a table. The sorting into themes stays your judgement. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. On your own papers, the thematic workflow in Litrevu runs like this: - Add your papers. Upload the PDFs from your reading, paste a PDF, DOI or arXiv link, or add open-access papers Litrevu finds on your topic that you choose. - Ask about a candidate theme. Ask, for example, “Which of my papers discuss how productivity was measured, and do they agree?” Citations come only from your papers, and when your papers do not cover a question, Litrevu says so. - Open the citations. Each citation opens the passage highlighted on the page of the PDF, so you can confirm that a paper really belongs under the theme before you tag the paper. - Compare papers in a table. Line up the studies under one theme side by side, with citations, to see where the studies agree and where they differ: the raw material for deciding which themes to merge or split. - Check your theme paragraph. Paste a paragraph you wrote and get each claim back as Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover the claim, not that the literature lacks it. Litrevu finds and lines up the evidence; you decide the themes, argue the case and write the chapter. ## Frequently asked questions ## What is the difference between a thematic and a chronological literature review? A thematic literature review groups studies by recurring idea, with one section per theme. A chronological literature review orders studies by publication date or traces how a trend developed over time. Use a chronological structure when the point of the review is how thinking changed; use a thematic structure for most dissertations and theses. ## Can one paper belong to two themes? Yes. A paper that reports on two recurring ideas belongs in both theme sections, cited for a different point in each. A paper that keeps fitting two themes equally well can also be a sign that the two themes overlap and need a clearer boundary. ## How do you find themes in your sources? Find themes by recording every source in one table (author, year, method, main finding) and reading down the findings column for ideas, populations or disagreements that recur. Write each recurring idea as a short phrase that contains a claim or tension, tag every source to a theme, and merge or split themes until each one has several studies to compare. ## Does each theme need its own heading? In most dissertations and theses, yes: each theme gets its own subheading. Sheffield Hallam University's guide advises adding a subheading every time the writing moves onto a different theme. A short literature review inside a journal article may use topic sentences instead of headings, so check your department's format. ## How long should each theme be? Divide the literature review's word budget by the number of themes, then let the theme closest to your own study run longer. A 2,000-word undergraduate literature review with two to three themes gives each theme several hundred words. For word counts by level, see how long should a literature review be . ## What should you do next with your sources? Start with the table, not with a sentence. In one sitting, fill one row per source, even briefly. In a second sitting, read down the findings column and write your candidate themes on a single page. Then keep the table alive: every new paper gets a row and a theme tag on the day you read the paper, so the outline updates as you read. If your sources are still scattered across downloads folders and email attachments, the guides on organising research sources and choosing a reference manager cover the step before this one. Ask which papers support a theme, or compare their findings in a table, then write the chapter yourself. It is free to start, no credit card required, so you can see what it does with your actual sources. Try Litrevu free ## Related Guides - How to Write a Literature Review - How to Synthesize Sources in a Literature Review - How Long Should a Literature Review Be? By Level and Country - How to Find a Research Gap in the Literature --- # How to Write a Conceptual Framework (With Examples) URL: https://litrevu.com/blog/how-to-write-a-conceptual-framework Category: Literature Review Published: 2026-07-25 Summary: How to write a conceptual framework for your thesis or dissertation. What it is, how it differs from a theoretical framework, a 5-step method, a worked example, a diagram, and the mistakes to avoid. Literature Review ## How to Write a Conceptual Framework (With Examples) By Wasim Ghoor · 25 July 2026 · 10 min read Think of a conceptual framework as the map you draw before the journey, not a decoration you add once you arrive. It is the single page that says: here are the things my study cares about, here is how I expect them to connect, and here is where I got that expectation. Get it right and the rest of your dissertation stops feeling like a pile of parts and starts feeling like one argument. ## What a Conceptual Framework Actually Is So what is a conceptual framework, really? It is your explanation of how the key ideas in your study fit together and how you expect them to influence one another. Usually it appears as a diagram of boxes and arrows, backed by a few paragraphs that talk the reader through it. The boxes are your concepts or variables. The arrows are the relationships you are proposing to investigate. Here is the reframe that helps most students. A conceptual framework is not a summary of what you have read. It is a claim about your own study. It says, out of everything in the literature, these are the factors I am placing at the centre, and this is the shape I think the relationship takes. Two researchers can read the same fifty papers and draw two different frameworks, because a framework is a decision, not a report. ## Conceptual vs Theoretical Framework This is the distinction that trips everyone, so let me hold it up cleanly. A theoretical framework borrows an established theory built by someone else and uses it as the lens for your study. A conceptual framework is the specific, custom map of your study, often assembled from pieces of several theories plus your own reading of the problem. An analogy. The theoretical framework is the branch of physics you are working within. The conceptual framework is the diagram of the particular bridge you are about to build, with your loads and your materials labelled. One is the general set of laws you accept. The other is the concrete thing you are testing. Many dissertations use both: a theory for grounding, then a conceptual framework that narrows the theory down to the exact variables and links you will measure. ## Where the Pieces Come From A framework you invent from thin air convinces nobody. Every box and every arrow should be traceable to something: a study, a theory, or a well-argued reason. This is exactly why the framework and your literature review are two views of the same work. The review shows the reader the terrain in detail. The framework is the map you drew after walking it. And here is where I get slightly opinionated, because it is the thing that separates a strong framework from a weak one. A weak framework is a summary in disguise: it lists concepts because they came up a lot in your reading. A strong framework is an act of synthesis : it takes findings that lived in separate papers and connects them into a single proposed structure that none of those papers stated on its own. The arrows are your contribution. That is the part you are adding to the conversation. ## A 5-Step Method (Steal This) You do not draw a good framework in one pass. You build it. These five steps move you from a messy list to a clean map. - Name your key concepts. Pull the main variables out of your research question . If your question asks whether X affects Y under condition Z, then X, Y, and Z are your starting boxes. - Sort them by role. Which is the independent variable (the cause you are studying), which is the dependent variable (the outcome), and which sit in between as mediators or moderators. Labelling the role of each box is half the work. - Propose the relationships. Draw an arrow only where you can say why you expect a link, and where a source or a theory supports it. An arrow with no reason behind it is a guess wearing a diagram. - Ground every link. For each arrow, hold in mind the paper or the theory it rests on. If you cannot name one, that is a gap you should either read into or flag as the untested link your study will examine. - Draw it, then narrate it. Lay the boxes and arrows out visually, then write the short passage that walks a reader through the diagram in words. The picture and the paragraph are a pair; neither stands alone. ## A Worked Example, Vague and Then Mapped Let me show you the difference the method makes. Suppose your study looks at remote work and employee performance. Here is the version most first drafts produce. Vague This study examines remote work, employee performance, job satisfaction, technology, communication, and wellbeing, which are all important factors discussed in the literature and connected to one another in various ways. Six boxes and no arrows. It is a word cloud, not a framework. There is no direction, no role for each concept, and no claim to test. Now the same subject, built through the five steps. Mapped Remote work (independent variable) is proposed to affect employee performance (dependent variable) through two mediators: autonomy and communication quality. The strength of that effect is expected to depend on the employee’s home-office setup (a moderator). In short: remote work raises autonomy, autonomy lifts performance, but only when communication quality holds and the home setup supports focused work. Read the second version as a diagram in your head. Remote work points to autonomy and to communication quality; both point to performance; home setup sits on the main arrow and bends it. Every box now has a job, every arrow makes a claim, and the whole thing states something a study could actually test. That is what turns a list of topics into a framework. ## Drawing the Diagram The visual does not need to be fancy. Boxes for concepts, arrows for proposed relationships, and a consistent reading direction, usually causes on the left flowing to outcomes on the right. A few conventions keep it legible. - One idea per box. If a box needs the word “and,” it is probably two boxes. - Arrows show direction. A single-headed arrow says A influences B. Keep them pointing one way unless you genuinely mean a two-way relationship. - Mediators sit on the path. Place a mediator between cause and outcome so the reader sees the chain. Place a moderator touching the arrow it changes. - Label sparingly. A clean diagram a reader grasps in ten seconds beats a crowded one with every nuance crammed in. Then write the accompanying paragraph. Name each concept, state each proposed relationship, and, where it matters, point to the reading behind it. The diagram is the summary; the paragraph is where the reasoning lives. ## Common Mistakes (The Ones That Cost You) - A framework that is really a summary. Boxes with no arrows means you have listed your reading, not mapped your study. The relationships are the point. - Ungrounded arrows. Every relationship should trace to a source, a theory, or an explicit “this is the untested link I am examining.” Arrows drawn on vibes get questioned first in a viva. - Too many boxes. A framework with fifteen concepts is a study you cannot finish. Keep the ones your question actually needs and let the rest live in the literature review. - Diagram and text disagreeing. If the picture shows an arrow the paragraph never mentions, a reader trusts neither. Make them say the same thing. - Confusing it with the theory. Do not just redraw a textbook model and call it yours. Your framework should reflect the specific variables and context of your study, even when a broader theory sits underneath it. ## Where It Sits, and Then What The conceptual framework usually comes near the end of your literature review or just after it, once the reader has seen the terrain and is ready for your map. From there it quietly organises the rest of the paper. Your aims and objectives should line up with the arrows you proposed. Your methodology should measure the boxes and test the links. When someone reads your results, the framework is the picture they hold in their head to make sense of the numbers. That is the real value of doing this well. A conceptual framework is not a hoop to jump through in chapter two. It is the spine that keeps every later chapter pointing the same way, so the finished dissertation reads as one connected argument rather than a stack of separate tasks. ## Check Your Framework Against Your Reading A conceptual framework is built from your reading, and every box and arrow on the map should trace back to a source. Litrevu helps you check that. Ask how the papers you upload define and measure each concept, and what relationships they found between them, and every answer links to a passage you can open, read, and check yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Compare how several studies measured the same variable, side by side, then draw and write the framework yourself. It is free to start, no credit card required, so you can see what it does with your actual sources. Try Litrevu free ## Related Guides - How to Write a Theoretical Framework - How to Write a Literature Review - How to Find a Research Gap in the Literature - How to Write a Methodology Section --- # How to Write a Rationale for a Research Study + Examples URL: https://litrevu.com/blog/how-to-write-a-research-rationale Category: Getting Started Published: 2026-07-24 Summary: A research rationale explains why your study is needed now: what is known, what is missing and why it matters. See a structure, a template and examples. Getting Started ## How to Write a Rationale for a Research Study + Examples By Jessica McLaren · 24 July 2026 · 15 min read · Updated 1 November 2026 A research rationale explains why your study needs to be done now: what is already known, what is still missing, and why filling that gap matters. In a proposal, the rationale usually runs from one paragraph to two pages (the CUNY Graduate Center’s Art History dissertation proposal guidelines ask for 1 to 2 pages for “Subject and Rationale”) and sits near the start, before the literature review. Research rationale (definition): the part of a proposal or thesis that argues why a study is worth carrying out. A rationale names what is known, the gap in that knowledge, why the gap matters and how the study will address it. San José State University’s Writing Center puts it in one line: “Rationale establishes your research’s significance.” Part of the rationale The question it answers What to write (one to three sentences each) 1. What is known What has research already established? The current state of knowledge, with two or three citations 2. The gap What is missing, unclear or not yet tested? The specific gap, phrased as “limited” or “no study in my search” 3. The stakes Why does the gap matter, and why now? Who is affected, what stays unresolved, what changed recently 4. The fit How will this study address the gap? Your population, setting, method or data, and why each fits the gap 5. The payoff What will the field or practice gain? The contribution you can realistically deliver ## What is a rationale in research? A rationale in research is the argument for why a particular study should be carried out: it shows that something in the existing literature is missing, unclear or unresolved, and that the proposed study will address it. The University of Portsmouth Library defines the rationale as the section that “states the reason your question is worth asking”, and says you “need to identify something that is missing, unclear, or not fully explored in the existing research” and “explain how your research will address that issue.” A research rationale is persuasive, not just descriptive. San José State University’s Writing Center ( Research Proposals handout, Spring 2022 ) notes that a rationale “may also sometimes be called background”, but that the two differ: in a rationale “you must also be persuasive in convincing the reader that your research is necessary.” The SJSU handout gives three tests a rationale can pass: - Does the study fill a gap in the existing body of research? - Does the study underscore or emphasise existing research? - Will the study add new, original knowledge to the existing understanding of the subject? A research rationale also goes by other names. DepEd research templates in the Philippines use “Context and Rationale” or “Rationale of the Research”, many UK and US guides say “justification” or “rationale”, and some proposal formats fold the rationale into the “background of the study” or the “significance of the study”. ## Where does the rationale go in a research proposal? The rationale goes near the start of a research proposal or thesis: either inside the introduction, after the problem and before the aims, or as its own short section straight after the research question and aims. The exact position depends on your university’s template, so check the format your department gives you first. Three published proposal formats show the range: - Inside the introduction. Queen’s University Belfast tells research degree applicants to use the introduction to “Present the rationale of your proposed study and indicate why it is worth doing” and to “Highlight what’s missing from current knowledge and what your research aims to contribute”. - Its own section after the aims. The University of Portsmouth Library lists the parts of a proposal as research question, aim and objectives; rationale; literature review; methodology; ethical considerations; project plan and timeline. - The opening section. DepEd’s basic research proposal template (Philippines) opens with “Introduction and Rationale”, before the literature review and the research questions. In a full thesis or dissertation, the rationale sits in Chapter 1 (the introduction), where it leads into the research questions. In the US, a master’s project is usually called a “thesis” and a PhD project a “dissertation”, but the rationale does the same job in both. ## How do you write a research rationale step by step? You write a research rationale in five moves: summarise what is known, name the gap, explain why the gap matters now, show how your study fits the gap, and state the contribution. Write one to three sentences for each move and you have a first draft of the rationale. - Summarise what is known. Write two or three sentences on what existing studies have established, with citations. The University of Exeter’s proposal guidance asks applicants to “contextualise your questions/aims in a broader field of study” and identify “the main literature that you are addressing.” - Name the gap. State exactly what is missing, contested or untested. The University of Portsmouth Library’s examples of a gap are an understudied area, a limitation in previous studies, or an unresolved issue. The guide on how to find a research gap covers where gaps appear in papers. - Explain why the gap matters, and why now. Say who is affected or what stays unresolved. The University of Sussex asks Social Sciences PhD applicants to explain, where relevant, “why it has practical significance for policy or professional practice” and “why the issue is timely and worthy of investigation.” - Show the fit. Explain why your design suits the gap: the population, setting, method or data. The Portsmouth guide notes that a study does not need to claim a major contribution; it might focus on a group or context that has received little attention, use a different method from previous studies, or produce more recent data. - State the payoff. Name the contribution you can deliver at your scale. A University of Cape Town proposal guide (the Humanities Faculty’s guidance, as reproduced by the Department for the Study of Religions) asks students to “signal briefly why you have chosen the question that you have” and “what contribution you think the completed research project might make to our understanding of the field.” A research rationale can draw on a theoretical need, a practical need or both. The UCT Humanities guide notes that for some students “the research project emerges out of a theoretical interest”, and “for others it emerges out of issues of practice.” ## What is an example of a good research rationale? A good research rationale names a specific gap, says who is affected by it, explains why the chosen design fits, and claims a modest contribution; a weak rationale only says the topic is “important”. The two versions below are on the same topic. The strong version is a format illustration: every bracket marks a claim the writer must fill from their own sources. Weak rationale: Mental health among university students is a very important and timely topic. Many students struggle, and it affects their studies. This research is significant because it will add to the literature and help students. The weak rationale names a topic, not a gap. “Important” and “adds to the literature” are true of every study, so a reviewer learns nothing about why this study is needed. Strong rationale (format illustration): Studies of [first-year student wellbeing] in [country] mostly [measure wellbeing once per semester] ([Author, Year]; [Author, Year]), so little is known about how [support needs change from week to week around assessment deadlines]. The gap matters because [student-support services at the writer’s university] plan counselling capacity [how capacity is planned], which [consequence the sources report]. This study will survey [number] first-year students weekly across one semester to identify when strain peaks. The findings would give [named support service] a basis for timing its resources. Move Weak rationale Strong rationale What is known Absent [What existing studies measure], with citations The gap “Adds to the literature” [The specific unknown, such as week-to-week change] The stakes “Many students struggle” [The consequence for support services, from sources] The fit Absent [A design that supplies the missing data] The payoff “Help students” [A named service gains a basis for a decision] Every bracket in the strong rationale has to be filled with a real figure or finding from a paper you have read. If you cannot fill a bracket, the rationale is not ready yet. ## Is there a research rationale template I can fill in? Yes: a research rationale template gives one sentence frame for each of the five moves; fill each frame from your own sources, then rewrite the frames into your own prose. The five frames: What is known: Research on [topic] has shown that [established finding] ([Author, Year]; [Author, Year]). The gap: However, [specific gap] has received limited attention, particularly in [population, setting or method]. The stakes: The gap matters because [who is affected or what stays unresolved], and [recent change] makes the question pressing now. The fit: This study addresses the gap by [design, population, data], which suits the gap because [reason]. The payoff: The findings will [contribution to knowledge, practice or policy]. If a sentence frame feels impossible to fill, the problem usually sits in the reading, not the writing. A research rationale is built from what your sources leave unfinished, so the literature review and the rationale draw on the same evidence: the literature review shows the gap in detail, and the rationale argues that closing the gap is worth the effort. The guide on writing a literature review for a research proposal covers the review side. ## What is the difference between a rationale, a problem statement and the significance of the study? A problem statement names the problem or gap, a rationale argues that the problem is worth studying and that your study is a sound way to study it, and the significance of the study describes who benefits from the results. The three overlap, and some templates merge them, so follow the headings your department asks for. Section Main question Definition from a published guide Typical position Problem statement What is the problem? “a definite, clear expression [statement] about an area of concern” (USC Libraries) Introduction, before the rationale Rationale Why study the problem now, this way? the section that “states the reason your question is worth asking” (University of Portsmouth) Introduction or its own section after the aims Significance of the study Who gains from the results? “describes the contributions of the study to knowledge” (De La Salle University) After the rationale, or at the end of Chapter 1 Background of the study What is the context? descriptive context; a rationale must also be “persuasive” (San José State University) Opening of the introduction The overlap is real. USC Libraries ’ Organizing Your Social Sciences Research Paper guide says a problem statement should convey “the study’s importance, benefits, and justification”, and San José State University’s handout says “Rationale establishes your research’s significance.” When a template asks for only one of the three sections, the five moves of a rationale (what is known, the gap, the stakes, the fit, the payoff) cover all three. The guide on how to write a problem statement covers the problem statement in detail. ## How long is a research rationale? A research rationale is usually one paragraph in a coursework paper and a few paragraphs to two pages in a thesis or dissertation proposal. Few universities set a word count for the rationale alone; the dissertation proposal guidelines of the CUNY Graduate Center’s Art History program are an exception, asking for a “Subject and Rationale” section of 1 to 2 pages. Whole-proposal limits set the ceiling for the rationale, because the rationale has to share the space with the literature review and the method: University (country) Proposal type Length of the whole proposal Queen’s University Belfast (UK) Research degree application Recommended: no more than 2,000 words, excluding references University of Exeter (UK) Research degree application “a guide would be 1,500-2,500 words” University of Sussex (UK) PhD application 1,000 to 2,000 words (Faculty of Science, Engineering and Medicine); 3,000 words, not including references (Faculty of Social Sciences) University of Cape Town, Humanities (South Africa) Master’s full proposal “usually between 3 and 6 typed pages” University of Cape Town, Humanities (South Africa) Doctoral full proposal “between 6 and 12 pages” Inside a 2,000-word proposal, a rationale of about half a page to a page leaves room for the other sections. Longer is not stronger: a rationale that sprawls has usually turned into a literature review and lost its argument. ## How do you write the rationale of the study in the Philippines? To write the rationale of the study in the Philippines, use the heading and position your template sets, then show the topic’s relevance, timeliness and benefits, because those are the qualities Philippine reviewers score. DepEd’s research proposal templates put the rationale first: the basic research proposal opens with “Introduction and Rationale” and the action research proposal opens with “Context and Rationale” (DepEd Order No. 16, s. 2017, Research Management Guidelines, as reproduced in Annex 4 of Tangub City Division Memorandum No. 161, s. 2019 ). Philippine university formats vary, so follow your college’s thesis manual. Philippine reviewers score the rationale directly. A 2025 DepEd Calbayog City Division appraisal form for basic research proposals scores “Rationale of the Research” out of 10 points; the form’s top two levels credit a rationale in which “The educational relevance and timeliness of the research topic are shown” (8 points) and in which “Policy implications, benefits and limitations of the study are stated” (10 points). The same division’s action research form gives “Rationale of the Action Research” 30 points, split between “Context” (15) and “Proposed Intervention, Innovation, Strategy” (15). Some Philippine university templates fold the rationale into the background. De La Salle University’s University Research Coordination Office guidelines (revised August 2013; archived copy, May 2025) have no section called “rationale”; instead, the “Background of the Study” asks for “strong justification for selecting such research problem”, and a separate “Significance of the Study” section “describes the contributions of the study to knowledge” and to the society, the government, the institution and the researchers, among others. If your template has both a background and a significance section, the five moves of a rationale (what is known, the gap, the stakes, the fit, the payoff) split across the two sections: what is known and the gap go in the background, and the payoff goes in the significance. ## What are the most common mistakes in a research rationale? The most common mistake in a research rationale is calling the topic “important” without naming a specific gap; the others are restating the problem without arguing for the study, overclaiming the contribution, claiming a gap you have not checked, and leaving out why the question matters now. - “Important and interesting.” Every topic can be called important. Replace the phrase with a specific stake: who is affected, what it costs, what decision depends on the answer. - Restating the problem and stopping. A rationale that only describes the gap has done half the job. The rationale still has to say why the gap matters and why your study is the right response. - Overclaiming the contribution. “This study will transform the field” invites doubt. The University of Portsmouth Library’s guide states that you do not need to claim a major contribution; a modest, deliverable payoff is more convincing. - A gap you have not checked. “No one has ever studied this” is easy to disprove. Write “limited attention” or “no study in my search”, and search for the exact gap, newest papers first, before you submit. The guide on whether your research question has already been answered covers that check. - Forgetting the “now”. The University of Sussex asks Social Sciences applicants to say “why the issue is timely”. A new policy, dataset or technology can make an old question pressing. ## How do you check a research rationale against your papers? You check a research rationale against your papers by asking the papers what they establish, comparing the studies side by side, and testing each claim in your draft rationale against the passages it relies on. The thinking stays with you: the AI assistant finds and lines up the evidence, and you decide what the gap is and write the argument. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. For a research rationale, the Litrevu workflow on your own papers is: - Add the papers behind the rationale. Upload the PDFs, paste a PDF link, a DOI or an arXiv link, paste a paper’s text, or pick open-access papers Litrevu finds on your topic. - Ask what is known. Ask “What do these papers establish about [topic]?” Each answer cites only your papers, and Litrevu says when your papers do not cover a question. Open any citation to see the passage highlighted on the PDF page. - Compare the studies. Ask for a side-by-side table of population, setting, method and main finding, with citations, to see where the studies agree and where they differ. - Check your draft rationale. Paste the paragraph you wrote. Each claim comes back Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your own library does not cover a claim. “Not in your papers” is not proof that a gap exists in the wider literature, so a fresh search for the exact gap is still needed before the rationale claims the gap. When you cite the papers, Litrevu switches between APA, MLA, Chicago, IEEE, Harvard and Vancouver and exports references to BibTeX or RIS. ## Frequently asked questions about research rationales ## What is the difference between a rationale and a problem statement? A problem statement names the problem: USC Libraries defines a research problem as "a definite, clear expression [statement] about an area of concern". A rationale argues why that problem is worth studying now and why the proposed study is a sound way to study it. Most proposals state the problem first and the rationale straight after. ## What is the difference between a rationale and the significance of the study? A rationale argues that a study is needed, while the significance of the study describes who benefits from the results. De La Salle University's research proposal guidelines say the significance section "describes the contributions of the study to knowledge" and the study's importance to society, the government, the institution and the researchers, among others. In short templates, the significance is often the last part of the rationale. ## How long should a research rationale be? A research rationale is usually one paragraph in coursework and a few paragraphs to two pages in a thesis or dissertation proposal. The CUNY Graduate Center's Art History dissertation proposal guidelines ask for 1 to 2 pages for "Subject and Rationale". In a 2,000-word proposal, half a page to a page leaves room for the literature review and the method. ## Can a research rationale be written in the first person? Yes, in most fields. The APA Publication Manual (7th edition) says to "Use first-person pronouns in APA Style to describe your work as well as your personal reactions", so "I will survey" is acceptable in APA. Some departments prefer the third person ("the researcher"), so follow your template. ## Does a literature review need a rationale? A standalone systematic review needs a rationale: item 3 of the PRISMA 2020 reporting guideline asks authors to "Describe the rationale for the review in the context of existing knowledge" and, if similar reviews exist, to "explain why the current review was considered necessary." A literature review inside a thesis does not usually need a separate rationale, because the thesis rationale covers it. ## Where does the rationale go in a research paper? In a research paper or thesis, the rationale goes in the introduction, after the background and the problem and before the research questions or aims. In a research proposal, some templates give the rationale its own section, for example after the aims at the University of Portsmouth or as the opening "Introduction and Rationale" in DepEd's template. ## What should you do first to write your research rationale? Start with the gap, not the opening sentence: write one sentence that says what is known and one that says what is missing, each backed by a paper you have read. Then add the stakes (why the gap matters now), the fit (why your design suits the gap) and the payoff (what the field gains), and cut anything that only describes the topic. When the papers behind your rationale are in one place, Litrevu can show you what each paper says, with every claim linked to its passage, so you can check your gap before your supervisor does. Add your papers and check your rationale against them . Free to start, no credit card required. ## Related Guides - How to Write a Problem Statement for a Research Paper (With Examples) - How to Write Research Aims and Objectives (With Examples) - How to Find a Research Gap: Steps, Types and Examples - How to Write a Research Proposal: 7 Sections + Template --- # Is My Turnitin Similarity Score Bad? How Markers Read It URL: https://litrevu.com/blog/turnitin-similarity-score-explained Category: AI & Research Writing Published: 2026-07-23 Summary: No percentage is bad on its own: markers read where the matching text comes from. See how they read the report, what your university sets, and what to fix. AI & Research Writing ## Is My Turnitin Similarity Score Bad? How Markers Read It By Wasim Ghoor · 23 July 2026 · 9 min read · Updated 25 October 2026 You submit your assignment, the report comes back, and there it is: 27%. Is that bad? Is 15% fine? Is anything above zero a problem? Every semester students panic over a number that, on its own, means far less than they think. Here is what the similarity score actually measures, what markers do with it, and how to deal with a high one honestly. ## What the Similarity Score Actually Measures The Turnitin similarity score is the percentage of your text that matches other sources in Turnitin’s database: published articles, websites, and previously submitted student papers. That is the whole definition. It is a text-matching tool, not a plagiarism verdict. This distinction matters more than anything else in this article. Turnitin does not know whether a match is a properly quoted passage with a citation, a reference list entry that obviously matches the original source, a common phrase like “statistically significant difference between the groups”, or copied text passed off as your own. It highlights the match. A human decides what the match means. So a 30% score made up of quoted, cited material and a reference list can be completely fine. A 9% score where the entire 9% is one unattributed paragraph lifted from a journal article is a serious problem. The number tells you how much matched. It says nothing about why. ## There Is No Universal Safe Percentage I know that is not what you came here for, so let me give you the honest version of the numbers anyway. Most universities treat scores under roughly 15% as unremarkable, and many flag papers above 20 to 25% for a closer manual look. Some departments set their own thresholds. A law essay built on statutes and case citations will naturally match more than a personal reflection piece. Your institution’s threshold, if it publishes one at all, is in your course handbook or assignment brief, and that document beats anything a blog tells you. Turnitin itself has been pushing in this direction. Its updated Similarity Report positions the score as one input into an integrity conversation rather than a pass or fail line, and the guidance it gives instructors says the same thing markers have said for years: read the matches, not the number. One more thing worth knowing. Two students can submit equally honest work and get very different scores. If your methodology section describes a standard survey design, chunks of it will resemble hundreds of other methodology sections, because there are only so many ways to say “participants completed the questionnaire online”. That is not misconduct. It is the nature of academic writing in a database of millions of papers. ## The Similarity Score Is Not the AI Score Turnitin now shows two separate indicators, and students mix them up constantly. The similarity score measures matching text, as above. The AI writing indicator is a different tool that estimates how much of the document reads like it was machine generated. They can move independently. Fully AI-generated text often has a low similarity score, because the model produces new sentences that do not match the database. Turnitin’s own figures from earlier this year suggest around 15% of submissions now contain a large majority of AI-generated writing, up from about 3% when its detector launched in 2023, which tells you why universities are paying attention to process rather than just output. AI detection is also famously unreliable at the level of an individual accusation, which is why a growing number of institutions have moved away from it, something we covered in AI detection is dead, universities are switching to process-based evaluation . For this article, put the AI score aside. Your similarity score is about matching text, and matching text is something you can inspect and fix yourself before you submit. ## How to Read the Report Like a Marker Does When a marker opens a flagged report, they do not stare at the percentage. They look at three things. - Where the matches sit. A score spread thinly across forty sources, a phrase here and a phrase there, reads very differently from 12% matching a single essay-mill website. Concentration is what raises eyebrows, not volume. - What kind of text is matching. Quotes, references, headings, and standard terminology are expected matches. Turnitin can be set to exclude quoted material and bibliographies, and many instructors do exactly that. If yours did not, your score may include your reference list, which inflates the number without meaning anything. This is also why your score sometimes drops when a marker applies filters you cannot see. - Whether matched passages are attributed. A highlighted paragraph next to a citation and quotation marks is a non-event. The same paragraph with no citation is the beginning of a difficult conversation. If you get access to your own report before final submission, read it exactly this way. Click into each significant match and ask: is this quoted and cited, is it a reference entry, is it standard phrasing, or is it something I actually need to rewrite or attribute? ## Fixing a High Score Honestly Say your draft comes back at 38% and the matches are real. Here is what actually works, and none of it is a trick. - Rewrite proper paraphrases. Most inflated scores I have seen come from patchwriting: taking a source’s sentence and swapping a few words. Turnitin catches it because the sentence skeleton survives, and it catches it correctly, because patchwriting is a form of plagiarism even when you cite. The fix is to close the PDF, write the idea from memory in your own structure, then cite it. Our guide to paraphrasing without plagiarising walks through the method with before and after examples. - Quote what deserves quoting. If a sentence is doing precise work, a legal definition, a famous claim, an author’s exact framing, quote it with quotation marks and a citation. Quoted material is honest matching. Trying to paraphrase a definition that only has one correct wording just produces bad paraphrase. - Add the missing citations. Sometimes a match is your own summary of a source that you forgot to cite. The text is yours; the idea is not. Add the citation. If your citations themselves are shaky, check them against the format guides for APA or whichever style your department uses. - Cut the filler you absorbed. Long stretches of scene-setting (“The rapid growth of technology has changed many industries”) match because thousands of students have written the same empty sentence. Deleting it improves the essay and the score at the same time. What I would not lose sleep over: your reference list matching, your assignment cover sheet matching, technical terms matching, or your own previously submitted draft matching if your university uses draft submissions. Mention that last one to your marker if it happens; self-matching from an earlier draft of the same assignment is a known quirk. ## What Not to Do The internet is full of tricks for lowering a similarity score: paraphrasing spinners, character substitution, inserting invisible symbols, translating text through two languages and back. Do not do any of this. Partly because it is misconduct, and misconduct aimed at defeating an integrity check is treated more harshly than the original problem would have been. Partly because it does not work; markers read the actual essay, and spun text reads like spun text. And partly because it misses the point. A high similarity score caused by real problems is information. It is telling you the draft leans too hard on its sources, and that is fixable by writing, not by laundering text. The same logic applies to buying “guaranteed low similarity” essays. Contract cheating services submit recycled work constantly, which is exactly how previous customers end up with 60% matches against another student’s submission. ## If You Get Flagged Anyway Sometimes honest work gets questioned. If that happens, the strongest thing you can bring to the meeting is evidence of your process: your notes, your source PDFs with highlights, your version history, your drafts. Markers are generally reasonable when a student can walk them through how the essay was built. We wrote a full guide on this in how to prove you wrote your own work , and it pairs well with keeping an AI-use disclosure statement if your course allows AI tools in any part of your workflow. And check your references before you submit, every time. A fabricated or wrong citation does more damage to your credibility than any similarity percentage, and it takes five minutes to catch, as we showed in how to spot fake AI citations . ## Ask Your Own Papers Most similarity problems start in the same place: a student with twenty open PDFs, a deadline, and no time left to put the reading into their own words, so the sources’ words creep in. The fix is understanding the reading early enough to write about it in your own words, and knowing exactly where each idea came from. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Litrevu is built to help a researcher read and check sources. Every citation opens to the passage in the source PDF, so the researcher can see the original wording next to their own. Understanding the reading is the part Litrevu helps with. Upload the papers you have already gathered, ask what they say, and open each answer’s passage to read the original wording. When you have written a paragraph, paste it in to see which of its claims your papers back and where each one came from. The writing stays yours: many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution’s policy and declare how you used AI. Litrevu is free to start, no credit card required. Try it free ## Related Guides - How to Paraphrase Sources in Academic Writing (Without Plagiarizing) - How to Prove You Wrote Your Own Work: Building a Paper Trail for 2026 - AI Detection Is Dead. Universities Are Switching to Process-Based Evaluation. - How to Cite Sources in a Research Paper (6 Styles Compared) --- # How to Write Research Aims and Objectives (With Examples) URL: https://litrevu.com/blog/how-to-write-research-aims-and-objectives Category: Getting Started Published: 2026-07-23 Summary: How to write research aims and objectives, step by step. What each one is, how they differ, a formula for both, worked examples, and the mistakes to avoid. Getting Started ## How to Write Research Aims and Objectives (With Examples) By Jessica McLaren · 23 July 2026 · 9 min read · Updated 30 July 2026 Most proposal templates have two boxes sitting right next to each other: Aim, and Objectives. They look almost the same, so people fill in the second box with a reworded version of the first and move on. That small confusion causes a surprising amount of trouble later. The aim and the objectives do different jobs, and once you can see the difference, both become quick to write. Here is a simple way to do it. ## Aim and Objectives Are Not the Same Thing Your research aim is the single, broad statement of what the whole project is trying to achieve. It is the destination. You have one aim, written as one sentence, and it usually starts with a verb like “to explore,” “to evaluate,” or “to determine.” Your objectives are the specific, measurable steps that add up to that aim. They are the route. You have several of them, usually three to five, and each one names a concrete task you will actually carry out: something to review, measure, compare, design, or test. The simplest way to hold the distinction in your head: the aim is where you are going, the objectives are how you get there. If a reader finished your aim and then read your objectives, they should be able to say “yes, doing all of those would get you to that.” When the objectives do not obviously build toward the aim, one of the two is off. ## Where They Come From Aims and objectives do not appear out of nowhere. They grow directly out of your problem statement . The problem says what is missing or unresolved; the aim states your intention to address it; the objectives break that intention into doable pieces. So the order of work matters. Get the problem clear first, and the aim tends to write itself as the mirror image of it. They also sit in a predictable place in your document. In a proposal or dissertation, aims and objectives come near the start of the introduction , after the background and problem statement and before the research questions. In a full research proposal they often get their own short labelled section. ## Step 1: Write the Aim Start with the aim because everything else hangs off it. A reliable formula is: to + a broad verb + your topic + the context or population. Keep it to one sentence. Resist the urge to pack in method or numbers; the aim is meant to be broad on purpose. Choose the verb to match how far your project actually reaches. A small study explores or describes. A larger one evaluates, compares, or determines. Do not promise “to prove” or “to solve” unless you genuinely can, because your objectives will have to deliver on whatever the aim claims. - Too vague: “To look at social media and students.” - Better: “To evaluate how daily social media use affects the study habits of undergraduate students in South Africa.” The second version names a verb (evaluate), a focused topic (daily social media use and study habits), and a population (undergraduates in South Africa). That is all an aim needs to do. ## Step 2: Break the Aim Into Objectives Now take the aim apart. Ask yourself: what would I actually have to do, in order, to achieve it? Each answer becomes one objective. Write each as a single sentence that begins with a precise action verb and points at something you can observe or measure. The verb is doing a lot of the work here, so pick specific ones. These are measurable and hard to fake: - Good verbs: identify, measure, compare, analyse, assess, examine, design, test, evaluate, quantify. - Verbs to avoid: understand, know, learn, appreciate, believe. You cannot show a reader that understanding happened, so they make weak objectives. A useful habit is to check each objective against the letters in SMART: is it Specific, Measurable, Achievable, Relevant to the aim, and Time-bound within your project? You do not need to announce the checklist in your writing. It is just a quiet test to run on each line before you keep it. ## A Full Worked Example Here is the whole chain, from topic to a finished set of aims and objectives, so you can see how each layer narrows the one above it. Topic: remote work and employee wellbeing. Problem: many firms made remote work permanent, but little is known about how it affects the wellbeing of early-career employees who have never worked in an office. Aim: to evaluate how permanent remote work affects the wellbeing of early-career employees at technology firms. Objectives: - To review existing research on remote work and employee wellbeing since 2020. - To measure self-reported wellbeing among early-career remote employees using a validated survey. - To compare wellbeing scores between fully remote and hybrid employees in the same firms. - To identify the specific workplace factors that employees link to higher or lower wellbeing. Notice the shape. Objective one is the reading. Objectives two and three are the core data work. Objective four is the analysis that pays the aim off. Together they cover the aim with nothing left over and nothing missing, and each one is a task you could tick off when it is done. ## How This Connects to Your Research Questions Objectives and research questions are close cousins, and it helps to see how they relate rather than treat them as two unrelated lists. An objective is a task, phrased as something you will do. A research question is the same thing turned into a question you will answer. Many people write their objectives first, then rephrase each one as a question. For example, the objective “to compare wellbeing scores between fully remote and hybrid employees” becomes the question “does wellbeing differ between fully remote and hybrid employees?” If you want the full method for that step, our guide on how to write a research question walks through it. Keeping the objectives and questions aligned, one to one, is one of the easiest ways to make a proposal feel tight. ## Common Mistakes to Avoid - Objectives that just restate the aim. If your first objective is the aim with a few words swapped, you have not broken anything down. Each objective should be a smaller, separate task. - Too many objectives. More than about five and the project starts to sound like three studies wearing a coat. Fold related tasks together and keep the list to the essentials. - Unmeasurable verbs. “To understand” and “to explore” belong in the aim, not the objectives. Objectives need verbs a reader can picture you carrying out. - Objectives you cannot actually do. If an objective needs data you have no way to collect or a sample you cannot reach, it is a wish, not a plan. Match the list to your real time, access, and skills. - A gap between the aim and the objectives. Read them together at the end. If the objectives do not cover the whole aim, add one; if they reach past it, your aim may need to be broader. ## How Many, and What Comes Next One aim, and three to five objectives, suits almost every undergraduate and Masters project. A larger doctoral study might run to five or six, but the same rule holds: each one earns its place by doing a distinct piece of the aim. When you are unsure, fewer and sharper beats more and vague. Once the aim and objectives are set, the rest of the opening follows from them, because they quietly decide your structure. Each objective tends to map to a chunk of your literature review and your later chapters. If you want to see how the whole opening fits together, our guides on how to start a research paper and the standard research paper structure show where each piece lands. ## From Objectives to What Your Sources Say Clear objectives make the next step easier, because each one points at a body of reading you now need to understand. Add the papers you are working from to Litrevu, ask what they say about each objective, and plan an outline around them. Every answer opens to the passage it came from, so you can read it and check it yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The thinking and the writing stay yours. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution's policy and declare how you used AI. It is free to start, no credit card required, so you can see what it does with your own sources. Try Litrevu free ## Related Guides - How to Write a Problem Statement for a Research Paper - How to Write a Research Question (With Examples) - How to Write a Research Proposal - How to Write a Research Paper Introduction --- # How to Write a Problem Statement for a Research Paper (With Examples) URL: https://litrevu.com/blog/how-to-write-a-problem-statement Category: Getting Started Published: 2026-07-22 Summary: How to write a problem statement, step by step. What it is, where it goes, a four-part formula, a fill-in template, and weak vs strong examples compared. Getting Started ## How to Write a Problem Statement for a Research Paper (With Examples) By Jessica McLaren · 22 July 2026 · 9 min read · Updated 27 July 2026 You have a topic. Your supervisor keeps asking, “Yes, but what is the problem?” A problem statement is the answer to that question, written down in a short paragraph. Get it right and everything after it, the aim, the questions, the whole introduction, falls into place. Here is how to write one. ## What a Problem Statement Actually Is A problem statement is a short, focused passage, usually one to three paragraphs, that says what specific issue your research addresses and why it matters. It is not your topic. A topic is a subject area, like “remote work” or “water quality in rural clinics.” A problem is the gap, tension, or unanswered question inside that subject that your paper will take on. Think of it this way. The topic tells a reader where you are standing. The problem statement tells them what is broken, missing, or unresolved on that spot, and why someone should care that you are looking at it. If a reader finishes your problem statement and can say, in one sentence, what you are trying to fix, you have done the job. ## Where It Goes in Your Paper The problem statement lives near the start of your introduction , after a sentence or two of background and before your aim and research questions. In a thesis or dissertation it often gets its own labelled section, sometimes called the “statement of the problem.” In a shorter paper it is a paragraph woven into the opening. Whatever the format, the order of ideas is the same: a little context, then the problem, then the response. Your aim, your research questions , and your objectives all grow out of the problem you name here, so it pays to get this paragraph solid before you write the rest. ## The Four-Part Formula (Steal This) Almost every strong problem statement moves through the same four beats. Write one sentence for each and you have a first draft. - The ideal. What should be true, or what we would like to know. Set the standard the reality falls short of. - The reality. What is actually happening, or what we do not yet know. This is the gap between the ideal and the situation on the ground. - The consequence. Why that gap matters. Who is affected, what it costs, or what stays stuck while it goes unaddressed. - The response. What your study does about it. One sentence pointing at your aim, so the reader knows the paragraph is going somewhere. Ideal, reality, consequence, response. You will see writers vary the wording, but the underlying shape almost never changes, because it is simply how you make a case: here is what we want, here is where we fall short, here is why it matters, here is what I will do. ## The Same Problem, Weak and Strong Let me show you the difference the formula makes. Here is a problem statement that is really just a topic wearing a coat. Weak Social media is very popular among university students. Students spend a lot of time on their phones. This research will look at social media use and study habits, which is an important and interesting topic that affects many people today. There is no gap here, no consequence, and no response. It names a subject and asserts it is interesting. A marker cannot tell what you are actually going to investigate. Now the same subject, run through the four beats. Strong Universities increasingly expect first-year students to manage their own study time online. Yet recent surveys suggest many first-years struggle to separate academic and recreational phone use, and existing research focuses on total screen time rather than how switching between the two disrupts a study session. Without that finer picture, student-support programmes target overall usage and may miss the switching behaviour that actually fragments attention. This study examines how task-switching between academic and social apps relates to study-session quality among first-year students, to inform more precise support. Read it against the formula. Sentence one is the ideal (students manage online study time). Sentence two is the reality and the gap (they struggle, and research measures the wrong thing). Sentence three is the consequence (support programmes miss the real driver). Sentence four is the response (this study examines the switching). Four beats, one tight paragraph, and now a reader knows exactly what you are doing and why. ## A Fill-in Template Stuck on a blank page? Fill in the four blanks below, then edit out the scaffolding until it reads like your own prose. Ideal: Ideally, [what should be true or known] . Reality: However, [what is actually happening, or what remains unknown] , and [what the gap is] . Consequence: As a result, [who is affected, or what it costs, or what stays unresolved] . Response: This study therefore [what you will do] in order to [the payoff] . If you are working on a proposal rather than a finished paper, this same paragraph does a lot of heavy lifting, and our guide to the research proposal shows where it sits alongside your aims and methods. ## Where the Problem Comes From Sometimes the hard part is not writing the statement, it is knowing what your problem even is. That comes from reading. When you notice that studies disagree, that a method has never been tried on your population, or that everyone keeps recommending more research on one point, you have found a candidate. That is a research gap , and it is the raw material of a problem statement. So if the four blanks feel impossible to fill, the fix is usually upstream: read a few more sources and pay attention to where they stop, disagree, or leave you wanting. Your literature review and your problem statement are two views of the same thing. The review shows the reader the gap in detail; the problem statement names it in a sentence. ## Common Mistakes (The Ones That Cost You) - Describing a topic, not a problem. “This paper is about X” is a topic. A problem needs a gap and a stake. If there is nothing missing or unresolved, keep digging. - Going too broad. “Climate change threatens the planet” is true and useless as a problem statement. Narrow it to the specific, named gap your paper can actually address. - No consequence. If you never say why the gap matters, the reader has no reason to keep going. Name who is affected or what it costs. - Smuggling in the solution. The problem statement sets up the question. Save your findings and recommendations for later sections; here you only point at what you will do. - Claiming a gap you cannot back up. “No research has ever looked at this” is rarely true and easy to disprove. Say what is under-studied, and let your sources support the claim. ## How Long, and Then What For most coursework papers, one solid paragraph is plenty. For a thesis or dissertation, a labelled statement of the problem might run half a page to a page, with the four beats expanded and a source or two backing the reality and the consequence. Longer is not better. A problem statement that sprawls has usually stopped being a problem statement and become a mini literature review. Once the problem is clear, the next moves are quick, because they all follow from it. Your aim restates the response as a goal. Your research questions break that goal into answerable pieces. If you want the full opening sequence, our guides on how to start a research paper and the standard research paper structure show how the problem statement hands off to everything after it. ## Back Your Problem Statement With Evidence A sharp problem statement is the hinge of a good introduction, and every claim in it needs a source behind it: how big the problem is, what has been tried, and what is still unresolved. Litrevu helps you find that evidence. Ask the papers you upload what they say, and every answer is cited to a passage you can open, read, and check yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Once you have written your statement, paste it in and see which of its claims your papers back. It is free to start, no credit card required, so you can see what it does with your actual sources. Try Litrevu free ## Related Guides - How to Write a Research Question (With Examples) - How to Write a Research Paper Introduction - How to Find a Research Gap in the Literature - How to Write a Thesis Statement - Research Gap vs Research Problem: Differences in One Table --- # How to Write an Annotated Bibliography (With Examples) URL: https://litrevu.com/blog/how-to-write-an-annotated-bibliography Category: Getting Started Published: 2026-07-21 Summary: How to write an annotated bibliography, entry by entry. The two parts of every entry, what belongs in the annotation, APA and MLA examples, and a weak vs strong version compared. Getting Started ## How to Write an Annotated Bibliography (With Examples) By Wasim Ghoor · 21 July 2026 · 10 min read · Updated 24 July 2026 An annotated bibliography is a reference list where every entry carries a short paragraph describing and judging the source. Two parts per entry: the citation, formatted exactly as your style guide demands, then the annotation. Get the format of each part right and the assignment is mostly done. Let me show you the format, then the examples. ## The Two Parts of Every Entry Every entry in an annotated bibliography has the same two elements, in the same order. First the citation, then the annotation directly beneath it, indented. - The citation. The full reference entry, formatted in whichever style your brief specifies (APA, MLA, Harvard, Chicago). Same rules as a normal reference list, no shortcuts because the annotation follows. - The annotation. One paragraph, usually 100 to 200 words, that summarises the source, assesses it, and says how it fits your project. Some briefs want only a summary. Most want the assessment too. Entries are ordered alphabetically by the first element of the citation, exactly like a reference list. That is the single most common thing students forget, so I am putting it first: the citation still obeys every rule it would obey anywhere else. If you are shaky on those rules, our guides to APA format and Harvard referencing cover the entry structure element by element. ## What Goes in the Annotation An annotation is not a book review and it is not a full abstract copied across. It is a tight paragraph that does three jobs, and the standard advice is to hit them in this order: summarise, assess, reflect. - Summarise. What is the source about? What is the main argument or finding, and what did the authors actually do? One or two sentences. - Assess. Is it credible, current, and relevant? How does it compare to the other sources on your list? Note the method, the sample, or the scope where those matter. - Reflect. How does this source fit your project? Does it frame your background, supply a method you will borrow, or offer a finding you will argue against? Which of the three you emphasise depends on the type of annotated bibliography you were asked for, and there are two. ## Descriptive vs Evaluative (Check Your Brief First) A descriptive (or informative) annotation summarises the source and stops there. It tells a reader what is inside without passing judgement. A critical (or evaluative, or analytical) annotation does the summary and then weighs the source: strengths, weaknesses, and its use to you. Most university briefs, especially those attached to a dissertation, want the critical version. Read your brief before you write a single entry. Writing twenty descriptive annotations when the marker wanted evaluation is a rewrite you can avoid by reading one sentence carefully. Yes, the wording of the brief matters that much. ## A Worked Example in APA Here is one complete entry, critical style, in APA 7. The citation uses a hanging indent in your document; the annotation sits underneath. I have used a plausible illustrative source so you can see the shape. Entry Okafor, R., & Lindqvist, M. (2024). Study routines and academic performance in first-year distance students. Journal of Higher Education Research, 41 (2), 118-137. Okafor and Lindqvist surveyed 612 first-year distance students and found that a fixed weekly study routine predicted higher end-of-year marks more strongly than total hours studied. The study is recent and the sample is large, though it draws from a single institution, which limits how far the results generalise. The self-reported routine data is a further weakness the authors acknowledge. For my project this source supports the argument that structure, not sheer effort, drives outcomes, and it pairs well with Mbeki (2023) below, which reaches the opposite conclusion on a face-to-face cohort. Notice the moves in order: two sentences of summary, two of assessment (recent, large, but single-site and self-reported), then one of reflection that connects it to another source and to the writer’s own argument. That final connecting sentence is what lifts an annotation from a summary into something a literature review can grow from. ## Weak vs Strong: The Same Source, Two Annotations The format is easy to get right and easy to get thin. Here is the same source annotated badly and then well, so you can see the difference at a glance. Weak This article is about study routines and marks. The authors did a survey. It was interesting and useful for my essay. I agree with their points. Strong The authors surveyed 612 first-year distance students and found that a fixed weekly routine predicted marks more strongly than total study hours. The large, recent sample is a strength; the single-institution scope and self-reported data are limits. This source anchors my claim that structure matters more than effort, and it directly contradicts Mbeki (2023), which sets up the tension my review explores. The weak version tells a marker nothing they could not get from the title. It has no specifics (how many participants, what method), no judgement (what is strong or shaky about it), and the phrase “useful for my essay” does no work. The strong version names the finding, weighs the evidence, and positions the source against another. Same length target, completely different value. ## The Same Entry in MLA Only the citation format changes; the annotation reads the same. In MLA 9 the entry above becomes: Okafor, Rachel, and Marta Lindqvist. “Study Routines and Academic Performance in First-Year Distance Students.” Journal of Higher Education Research , vol. 41, no. 2, 2024, pp. 118-137. Full first names instead of initials, quotation marks around the article title, “vol.” and “no.” and “pp.” spelled out, the year moved after the issue. Small differences, and markers notice every one of them. If you are switching between styles, our comparison of six citation styles lays the formats side by side. ## A Five-Step Process Once the format is clear, the work is repetitive in the best way. Run every source through the same five steps. - Gather and vet your sources. Collect more than you need, then keep the credible and relevant ones. Our guide to finding academic sources covers where to look and how to judge quality. - Write the citation first. Format the full reference entry before you write a word of annotation. It forces you to record the details while the source is open. - Read with a pen. Note the main argument, the method, and one strength and one limitation as you read. Those notes are your annotation in rough form. - Draft the annotation. Summarise, assess, reflect, in that order, in your own words. Keep it to the word count in the brief. - Alphabetise and proof. Sort by the first element of each citation, then check every entry against the style rules once more. ## Common Mistakes (The Ones That Cost Marks) - Pasting the abstract. The abstract is the authors’ words and their framing. An annotation must be yours, and it must assess, which an abstract never does. - Summarising with no assessment. If the brief asked for a critical annotation, a pure summary is half an answer. Always say what the source is worth to you. - Sloppy citation format. A strong annotation attached to a broken citation still loses the citation marks. The reference rules do not relax here. - Wrong order. Entries go alphabetically, not in the order you read them or by date, unless your brief specifically says otherwise. - Copying phrasing from the source. An annotation is written in your own words. If you lean on the source’s sentences, you are paraphrasing, and our guide to paraphrasing without plagiarising explains where the line sits. ## Why This Assignment Is Worth Doing Properly An annotated bibliography is often set as a stepping stone. The reflection sentences you write, the ones that connect one source to another and to your argument, are the raw material of a literature review . A review is not a list of annotations laid end to end, though. It groups sources by theme and puts them in conversation, which is a skill of its own that our guide to synthesising sources walks through. Do the annotations well now and that later step gets much easier. ## From Annotated Sources to the Bigger Picture Once your sources are gathered and annotated, the next step is seeing how they relate: where they agree, where they disagree, and what they leave open. Add the papers to Litrevu and compare them side by side on aim, design, sample, findings and limitations, or ask a question across all of them. Every answer opens to the passage it came from, so you can check your annotations against what each paper actually says. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Your annotations stay in your own words, which is the point of writing them. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution's policy and declare how you used AI. It is free to start, no credit card required, so you can see what it does with your actual sources. Try Litrevu free ## Related Guides - How to Find Academic Sources for Your Research Paper - How to Organize Research Sources (So You Don’t Lose Your Mind) - Literature Review Example: Annotated Sample You Can Follow - How to Cite Sources in a Research Paper (6 Styles Compared) --- # Zotero vs Mendeley vs EndNote: Student Comparison Table URL: https://litrevu.com/blog/zotero-vs-mendeley-vs-endnote Category: Getting Started Published: 2026-07-21 Summary: Zotero suits most students: free, unlimited reference syncing, and Word and Google Docs plugins. Compare Mendeley and EndNote on cost, storage and sharing. Getting Started ## Zotero vs Mendeley vs EndNote: Student Comparison Table By Samuel de Bruyn · 21 July 2026 · 12 min read · Updated 20 November 2026 Zotero is the best reference manager for most students: Zotero is free, syncs an unlimited library of references, and inserts citations in Microsoft Word, LibreOffice and Google Docs. Choose Mendeley if your research group already shares a Mendeley library, and EndNote if your university licenses EndNote for you, which many universities do, so check before you buy. What is a reference manager? A reference manager (also called a citation manager) is software that stores the details and PDFs of every source you read, then inserts in-text citations and a reference list into your document in the citation style you choose. Zotero, Mendeley and EndNote are the three reference managers compared on this page. Zotero vs Mendeley vs EndNote, from each vendor's own pages (as of November 2026) Zotero Mendeley EndNote Made by Digital Scholar, a nonprofit; open source Elsevier Clarivate Cost model Free; optional paid storage plans Free account Desktop: one-time purchase (full, upgrade or student licence) with a free trial. EndNote Basic: free, online only Free file storage 300 MB of Zotero Storage 2 GB EndNote Basic: 2 GB Reference data Data syncing is free and unlimited Not stated on Mendeley's page “An unlimited set of references” (desktop) Cite while you write Microsoft Word, LibreOffice, Google Docs Mendeley Cite: Office 365, Word 2016 and above, Word for iPad Microsoft Word and Google Docs (desktop); Word via Cite While You Write (EndNote Basic) Save from the browser Zotero Connector for Chrome, Firefox, Edge and Safari Mendeley Web Importer Check EndNote's site for your version Citation styles Over 10,000 in the Zotero Style Repository Not stated on Mendeley's page Not stated on EndNote's pages Sharing Group libraries Groups: shared libraries for colleagues, course-mates or co-authors Share libraries or subsets with up to 1,000 people Platforms Mac, Windows, Linux, iOS, Android Not stated on Mendeley's page Not stated on the pages read Best for Most students, on any budget Groups already working in Mendeley Students whose university licenses EndNote Sources: Zotero home page , Zotero sync , Zotero Storage , Zotero word processor plugins , Zotero download page , Zotero styles , Mendeley features , Mendeley Cite , Mendeley at Elsevier , EndNote home page , EndNote buying page and the University of North Texas guide to EndNote Basic , all read in November 2026. “Not stated” means the vendor's page did not say, not that the feature is missing. ## Zotero vs Mendeley: which is better for students? Zotero is better than Mendeley for most students, because Zotero is free, syncs an unlimited amount of reference data, and cites inside Microsoft Word, LibreOffice and Google Docs, while Mendeley's Mendeley Cite page names only Microsoft Word. Mendeley wins on free file storage: Mendeley gives 2 GB, against Zotero's 300 MB of Zotero Storage. The storage gap matters less than it looks. Zotero's sync page says data syncing “is free and unlimited, and it can be used without file syncing”, so the 300 MB cap applies only to attached files such as PDFs. A Zotero user who runs out of Zotero Storage can buy a larger plan, or sync files through WebDAV storage, which some employers and institutions provide (Zotero's sync page notes that WebDAV works for personal libraries, not group libraries). The Google Docs point decides it for many students. Zotero's Google Docs support runs through the Zotero Connector for Chrome, Firefox, Edge and Safari, with the Zotero desktop app installed. Mendeley's own Mendeley Cite page names Microsoft Office 365, Word 2016 and above and the Word app for iPad, and does not mention Google Docs or LibreOffice. Pick Mendeley over Zotero when your supervisor or research group already keeps a shared Mendeley library. Mendeley's Groups feature lets colleagues, course-mates or co-authors add references and annotate PDFs together, and a shared library your group actually maintains is worth more than any single feature. ## Zotero vs EndNote: which should you use? Use Zotero unless your university gives you EndNote, because Zotero is free while EndNote desktop is a one-time purchase (EndNote's buying page lists full, upgrade and student licences, plus a free trial). If your university already licenses EndNote, EndNote is a strong choice, and some libraries support it directly: the University of Queensland's library, for example, “provides a licence and support for EndNote” for current students and staff. EndNote's strengths are on its own home page: an “unlimited set of references”, citing in Microsoft Word and Google Docs, and sharing whole libraries or subsets of references “with up to 1,000 people”. EndNote's site also promotes AI features in EndNote 2025, including AI that identifies a paper's key takeaways and answers follow-up questions from the text. Zotero's strengths are cost, the Zotero Connector for four browsers, plugins for Word, LibreOffice and Google Docs, and over 10,000 citation styles in the Zotero Style Repository. There is also a free EndNote. EndNote Basic (sometimes called EndNote Online) is free, runs entirely in the browser, gives 2 GB of storage and works with Microsoft Word through Cite While You Write, according to the University of North Texas library guide. EndNote Basic is a reasonable choice for a short project, but Zotero gives unlimited reference data and Google Docs support at no cost. ## Mendeley vs EndNote: what is the difference? The main difference between Mendeley and EndNote is cost: Mendeley is a free reference manager from Elsevier, while EndNote desktop from Clarivate is a one-time purchase that many universities license for their students. Both Mendeley and EndNote cite in Microsoft Word, but only EndNote's home page names Google Docs as well. Mendeley vs EndNote (as of November 2026) Mendeley EndNote Owner Elsevier Clarivate Cost Free account with 2 GB of storage One-time purchase for desktop; EndNote Basic free online with 2 GB Word processors Mendeley Cite for Microsoft Word (Office 365, Word 2016 and above, Word for iPad) Microsoft Word and Google Docs Collaboration Groups: shared libraries with annotation Share libraries with up to 1,000 people AI features named on the vendor's page “Ask AI” Key takeaways and follow-up questions on a paper (EndNote 2025) Choose Mendeley if your supervisor or group shares a Mendeley library. Choose EndNote if your university provides EndNote and runs training for it, or if your team needs to share one library with many people. ## Which reference manager is best for a thesis or dissertation? For most theses and dissertations, Zotero is the best reference manager, because Zotero is free, handles a library of any size and cites in Word, LibreOffice and Google Docs. The exceptions are a research group that already shares a Mendeley or EndNote library, and a university that licenses EndNote and supports it with training. In the US, a master's project is usually called a thesis and a PhD project a dissertation; the choice of reference manager is the same either way. Which reference manager to choose, by situation Your situation Choose Why Undergraduate dissertation or honours project Zotero Free, unlimited reference data, plugins for Word and Google Docs Coursework master's thesis or dissertation Zotero, or EndNote if your university licenses it A licensed EndNote with library training is as good a choice as free Zotero Research master's or PhD in a group with a shared library Whatever the group uses One shared library beats a better tool used alone Writing in Google Docs Zotero or EndNote Mendeley Cite's page names Microsoft Word only Writing in LaTeX JabRef JabRef supports BibTeX and BibLaTeX natively Short project, no installs allowed EndNote Basic Free, browser-based, 2 GB Choose the reference manager at the start of the thesis, not halfway through. Zotero documents imports from both Mendeley and EndNote, but a mid-thesis move means checking every imported reference and relinking the citations already in your chapters. ## Does your university pay for EndNote? Many universities pay for EndNote, so check your library's referencing page before you buy a licence. Three published examples, each for that university's own students and staff only: Examples of universities that provide EndNote (checked November 2026) University Country What the university says University of Pretoria South Africa “The university paid the Endnote license.” (UP Library EndNote guide) University of Oxford United Kingdom “Members of the University of Oxford can use the desktop version of EndNote for free while they are at the University” University of Queensland Australia “The Library provides a licence and support for EndNote for current UQ students and staff.” University access can end when you leave: Oxford's page says members can use EndNote “while they are at the University”. If you expect to keep your library after graduating, either keep a free Zotero library alongside EndNote or export the EndNote library before your access ends. ## How do you move a library from Mendeley or EndNote to Zotero? You move a Mendeley library to Zotero with Zotero's built-in online import, and an EndNote library to Zotero by exporting an XML file from EndNote and importing that file into Zotero. Both routes are documented on Zotero's own support pages. For Mendeley, Zotero's Mendeley import guide says to sync everything to Mendeley's servers first, then choose File → Import → “Mendeley Reference Manager (online import)” in Zotero and log in to Mendeley. Zotero says it can import “all data, including the full folder structure, from an online Mendeley library”. Two limits from the same guide: Mendeley group libraries cannot be imported directly (copy the items into your own Mendeley library first), and citations inserted with Mendeley Cite cannot be read by Zotero. For EndNote, Zotero's EndNote import guide says “The best export format for this is XML”. Export from EndNote with File → Export as XML, save the file inside the EndNote library's .Data folder so the PDFs come across, then use File → Import in Zotero. Zotero saves any EndNote fields it cannot map, such as author affiliation, as notes tagged “_EndnoteXML import”, and recommends backing up your Zotero data before importing into a library that already has items. ## What changed in Zotero in 2026? Zotero moved to a rapid release schedule in 2026, shipping new versions “roughly every 6–10 weeks”, according to the Zotero blog post of 22 January 2026 that also announced Zotero 8. Zotero 9 followed on 10 April 2026 and Zotero 10 on 17 August 2026, and Zotero's download page offers Zotero 10 as of November 2026. The Zotero blog describes Zotero 10 as adding “a host of powerful new features for searching and managing your library”, and a 5 October 2026 post announced Read Aloud for Zotero on iOS, which reads PDFs, EPUBs and webpage snapshots aloud. For students, the practical effect of the faster schedule is that fixes and features reach the free app within weeks. Source: the Zotero blog . ## What are the alternatives to Zotero? The main alternatives to Zotero are Mendeley, EndNote (desktop or the free EndNote Basic), JabRef and Paperpile. Each alternative suits a narrower case than Zotero does. Alternatives to Zotero, from each tool's own page (as of November 2026) Alternative What the tool's own page says Suits Mendeley Free, with 2 GB of storage, Groups and the Mendeley Web Importer Groups already on Mendeley EndNote Desktop is a one-time purchase; cites in Word and Google Docs; shares with up to 1,000 people Students whose university licenses EndNote EndNote Basic Free, online only, 2 GB, Word via Cite While You Write (per the UNT library guide) Short projects without installs JabRef “100% free and open-source”, with native BibTeX and BibLaTeX support LaTeX and Markdown writers Paperpile Citations in Word and Google Docs, a browser extension, sign-in with a Google Account, a free trial Students who write mainly in Google Docs If you write in Word or Google Docs and want to pay nothing, none of the alternatives above beats Zotero. JabRef is the alternative to consider if your thesis is written in LaTeX. ## Does a reference manager check that your citations are real? No. A reference manager formats citations; a reference manager does not check that a source exists or that it says what your sentence claims. If Zotero, Mendeley or EndNote saved wrong metadata from a website, the reference comes out perfectly formatted and still wrong, and a reference copied from an AI chatbot may describe a paper that does not exist at all. Check references in three passes: open each source and confirm it supports the sentence that cites it, run the list through a reference checker such as the free Litrevu reference checker , and check key papers for retractions with the steps in how to check if a paper has been retracted . Our guide to spotting fake AI citations shows what fabricated references tend to look like. ## How does an AI assistant for writing backed by sources work with a reference manager? A reference manager stores and cites your papers; an AI assistant for writing backed by sources helps you read, compare and check what those papers say. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Here is how a student with a Zotero, Mendeley or EndNote library uses Litrevu at the reading and writing stage, using only the steps on how Litrevu works : - Add the papers. Upload the PDFs from your reference library, or paste a PDF link, a DOI or an arXiv link for each paper. - Ask the papers questions. Ask “What methods do these studies use?” and Litrevu answers with citations drawn only from the papers you added, and says so when your papers do not cover the question. - Open the citations. Each citation opens its passage highlighted on the page of the PDF, so you read the evidence yourself before you rely on it. - Compare the papers. Line the studies up side by side in a cited table to see where they agree and where they differ. - Check your paragraph. Paste a paragraph you wrote, and each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover the claim; it is not proof that the claim is wrong or that nobody has studied it. - Export the references. Switch between APA, MLA, Chicago, IEEE, Harvard and Vancouver, and export your references as BibTeX or RIS files. You still decide what the papers mean, build the argument and write the chapter. Litrevu finds, lines up and checks the evidence in the papers you chose. ## Reference manager FAQ ## Is Zotero really free? Yes. Zotero is free and open source, made by Digital Scholar, a nonprofit, and Zotero's data syncing is free and unlimited. The only paid part is extra file storage beyond the free 300 MB of Zotero Storage, and you can avoid paying by syncing files through WebDAV or keeping PDFs on your own drive. ## Is Mendeley still free? Yes. Mendeley's own site offers a free account with 2 GB of storage, as of November 2026. Mendeley is an Elsevier product, and its Mendeley Cite add-in works in Microsoft Word. ## Can I move my library from Mendeley or EndNote to Zotero? Yes. Zotero imports a Mendeley library through File → Import → "Mendeley Reference Manager (online import)", after you sync everything to Mendeley's servers. For EndNote, Zotero recommends exporting the EndNote library as XML, saved inside the library's .Data folder so PDFs transfer, then importing that file into Zotero. ## Does my university pay for EndNote? Often, yes. The University of Pretoria, the University of Oxford and the University of Queensland all provide EndNote to their own students and staff, according to each university's own library pages, checked in November 2026. Check your own library's referencing page before buying a licence, and keep in mind that university access may end when you leave. ## Which reference manager works with Word and Google Docs? Zotero and EndNote both work with Microsoft Word and Google Docs. Zotero also supports LibreOffice, and Zotero's Google Docs support needs the Zotero Connector in Chrome, Firefox, Edge or Safari. Mendeley Cite's page names Microsoft Word (Office 365, Word 2016 and above, and Word for iPad) and does not mention Google Docs. ## Which reference manager is best for LaTeX? JabRef is a strong choice for LaTeX, because JabRef is free, open source and supports BibTeX and BibLaTeX natively. JabRef also saves your library in a simple text-based file, which its site describes as having no vendor lock-in. ## Which reference manager should you start with today? The best reference manager is the one you install before your next reading session: Zotero for most students, Mendeley if your group shares a Mendeley library, EndNote if your university licenses it. Once your papers are in a library, the next step is understanding what they say together. Add those papers to Litrevu to ask them questions, compare them and check your paragraphs against them, with every answer opening to a passage you can read for yourself. Free to start, no credit card required. Ask your papers a question ## Related Guides - How to Organize Research Sources - How to Turn Your Zotero Library Into a Literature Review - How to Cite Sources in a Research Paper - How to Spot Fake AI Citations Before You Submit --- # How to Write a Theoretical Framework: 5 Steps + Example URL: https://litrevu.com/blog/how-to-write-a-theoretical-framework Category: Literature Review Published: 2026-07-19 Summary: A theoretical framework is the published theory that explains what you study. Choose one in 5 steps and see how it differs from a conceptual framework. Literature Review ## How to Write a Theoretical Framework: 5 Steps + Example By Wasim Ghoor · 19 July 2026 · 13 min read · Updated 3 November 2026 A theoretical framework is the published theory, or small set of theories, that explains why the things you are studying should relate the way you expect. To write one, take the concepts in your research question, list the theories your field already uses for them, choose one and justify it against the alternatives, define each construct for your own study, and link those constructs to your method. Definition: A theoretical framework is an established theory that a researcher selects, and does not invent, to explain the phenomenon a study investigates. The framework defines the study’s key concepts, states how they relate, and gives the method and the discussion something specific to test against. ## What is a theoretical framework? A theoretical framework is an existing theory that a study uses as its explanation of why the studied concepts relate as expected. Federation University Australia’s research frameworks helpsheet (2025) describes the theoretical framework as the use of a pre-established theory to explain a phenomenon, selected for its fit with the study. The University of Melbourne Library’s guide for Education doctoral students quotes Wentz (2014, p. 83): a theoretical framework is “a guiding principle for research that provides structure or an explanation to a problem.” Think of a theoretical framework as a pair of glasses: the world in front of you stays the same, but the glasses decide what comes into focus. Baylor University Libraries uses the same image, calling the framework a lens through which to examine a topic. Two researchers can study why students drop out of an online course and reach different conclusions because one looks through a motivation theory and the other through a technology acceptance theory. A theoretical framework does four jobs in a thesis or dissertation: - Explains the mechanism. The theory says why one concept should affect another, not only that it will. - Defines the concepts. A word such as “engagement” gets one specific meaning that the study can measure. - Shapes the method. Northcentral University asks students to show how the framework guided the problem statement, purpose and research questions. - Gives the discussion a benchmark. The Concordia University Chicago library guide notes that a study can build knowledge by validating or challenging the assumptions of the theory it uses. ## How do you write a theoretical framework step by step? You write a theoretical framework in five steps, working backwards from your own research question rather than from theory in general. The Concordia University Chicago library guide on theoretical frameworks builds the framework the same way: start from the research problem, list the variables, review how other scholars have handled the question, then choose the theory that best explains the relationships between your variables. Step What you do What you end up with 1. Pull out the concepts Underline every abstract noun in your research question The concepts the framework must define and connect 2. List candidate theories Note which theories recent studies on those concepts use A shortlist of theories your field already relies on 3. Choose and justify Pick the theory that explains the mechanism; say why you rejected the others One main theory with a stated reason 4. Define the constructs State what each part of the theory means in your setting and population Definitions you can measure or observe 5. Link to your method Write the relationships the theory predicts and draw them Propositions or hypotheses, plus a diagram ## Step 1: Pull the key concepts out of your research question Write your research question at the top of a page and underline every abstract noun in it. A question such as “How does perceived workload affect engagement among part-time postgraduate students?” gives two concepts to account for: perceived workload and engagement. Those two terms are what the theoretical framework has to define and connect. ## Step 2: Find the theories your field already uses for those concepts Read recent peer-reviewed studies on your concepts and note which theories each study says it is built on. Walden University Library’s guide on theories and theorists gives the same advice: identify the theories your sources aligned with their studies, then select the theory that best aligns with your research question. If the same theory keeps appearing across your reading, the field is telling you where the conversation happens. The Litrevu guide on finding academic sources covers where to search. ## Step 3: Choose one main theory and justify the choice Pick the theory that best explains the mechanism behind your question, then compare the chosen theory with one or two alternatives you rejected. Federation University Australia’s research frameworks helpsheet (2025) asks researchers why they chose a theory as opposed to another approach, and whether the theory is clearly linked to their aims. Baylor University Libraries tells doctoral students to expect to find and discard several possible frameworks before choosing one, so a shortlist that shrinks is normal. ## Step 4: Define each construct in your own study’s terms Take each component of the chosen theory and state what the component means for your population and setting, citing the original source for each definition. The Concordia University Chicago guide lists defining concepts and variables as a core job of the framework. A precisely defined construct is one your methodology section can measure or observe; a vague one cannot be measured at all. ## Step 5: State the relationships and link them to your method Write out in plain sentences what the theory predicts about how your constructs relate, derive your propositions or hypotheses from those sentences, then draw the relationships as a simple diagram. Northcentral University’s Center for Teaching and Learning asks dissertation students to present the framework’s key concepts, explain how the concepts relate, and show how the framework guided the problem statement, purpose and research questions. The diagram often doubles as the conceptual framework if your programme asks for one. ## Theoretical framework vs conceptual framework: what is the difference? A theoretical framework is an established theory that you select; a conceptual framework is a model of your own study that you build, often as a diagram of variables and the relationships between them. Federation University Australia’s helpsheet (2025) says the two terms are often conflated and used interchangeably, but a theoretical framework is typically an off-the-shelf theory that is “selected”, while a conceptual framework is “built” from several concepts. Aspect Theoretical framework Conceptual framework Question it answers Which established theory explains this? How do the specific variables in my study connect? Where it comes from Borrowed from published literature Built by you for this study, often from parts of several theories Scope General Specific to your case Usual form Prose explaining the theory and its constructs A diagram, prose, or both The University of Melbourne Library quotes Miles and Huberman (1994, p. 18): a conceptual framework “explains, either graphically or in narrative form, the main things to be studied.” Baylor University Libraries notes that a dissertation may include both frameworks. If your programme asks for only one, ask your supervisor which one is meant before you write. The Litrevu guide on how to write a conceptual framework covers the diagram side in detail. ## Where does the theoretical framework go in a thesis or dissertation? In most theses and dissertations the theoretical framework sits inside the literature review chapter or immediately after the literature review, under a heading such as “Theoretical Framework” or “Theoretical Background”. That is the placement Federation University Australia’s research frameworks helpsheet (2025) describes for higher-degree research theses. In US doctoral programmes that use a five-chapter template, such as Northcentral University’s , the framework is summarised in Chapter 1, discussed in full in Chapter 2, and revisited in Chapter 5 when the findings are interpreted. The names change by country. In the US, a master’s research project is usually called a master’s thesis and a doctoral one a PhD dissertation, and the placement guidance applies to both. In the Philippines, the University of the Philippines Manila proposal rubric gives the study framework its own chapter, Chapter III, after the review of related literature (RRL) in Chapter II, and scores whether the framework argues for the chosen theory based on the RRL. Whatever the document is called, the order is the same: the literature review shows what is known and where knowledge runs out, and the theoretical framework then names the theory you will use to study the research gap . The Litrevu guide to research paper structure shows how the chapters fit together. Document Where the theoretical framework sits Source Higher-degree research thesis (Australia) Part of the literature review, or a section straight after the literature review; a conceptual framework may appear across several chapters Federation University Australia, research frameworks helpsheet (2025) Doctoral dissertation, five-chapter template (US) Summary in Chapter 1 (no more than two pages), full discussion in Chapter 2, revisited in Chapter 5 Northcentral University, Center for Teaching and Learning Research proposal (Philippines) Its own chapter, “Chapter III Study Framework”, after “Chapter II. Review of Related Literature”, scored at 20 points University of the Philippines Manila proposal rubric ## How long should a theoretical framework be? No single length applies to every theoretical framework; the length is set by your programme’s template and by how many constructs the theory needs you to define. The one hard figure in the university guides read for this article is Northcentral University’s : the Chapter 1 summary of the framework should not exceed two pages, with the fuller discussion placed in Chapter 2. Federation University Australia’s helpsheet (2025) gives the principle behind the number: use only the elements of a theory the study needs. A useful test is whether every paragraph in the theoretical framework either defines a construct you will measure or states a relationship you will test. For the length of the surrounding chapter, the Litrevu guide on how long a literature review should be gives figures by level and country. ## Theoretical framework example The example below applies the five steps to one research question. It is a format illustration, not a real study: there is no data and no finding, only the shape a theoretical framework takes. Element Illustration Research question Why do part-time postgraduate students disengage from online coursework in their second semester? Concepts Disengagement, perceived workload, control over when coursework is done Theory chosen Self-determination theory (Ryan & Deci, 2000; see the Self-Determination Theory organisation ), which explains motivation through three basic psychological needs: autonomy, competence and relatedness Alternative rejected Technology acceptance model ( Davis, 1989 ), which explains whether people adopt a system through perceived usefulness and perceived ease of use; it suits a question about adopting a platform better than one about students who already use the platform and still drift away Constructs defined Autonomy: how much control a student has over when coursework is completed. Competence: the student’s belief that the workload is achievable alongside paid work Proposition Where perceived workload rises faster than scheduling autonomy, the need for competence goes unmet and disengagement follows; students with rigid deadlines would disengage earlier than students with flexible ones at the same workload The Self-Determination Theory organisation defines autonomy as “the experience of volition and willingness” and competence as “the experience of effectiveness and mastery”. Those definitions are the starting point; the theoretical framework narrows each one to something the study can measure, such as scheduling flexibility for autonomy. The proposition then gives the discussion section a benchmark: rigid-deadline students either disengaged earlier or did not, and both outcomes say something about the theory. ## What are common theoretical framework mistakes? The six most common theoretical framework mistakes are summarising the theory instead of applying it, stacking too many theories, choosing a theory that does not fit, leaving constructs undefined, dropping the framework after the literature review, and citing theorists you have not read. Each fix in the table comes from a named university guide. Mistake What it looks like Fix Guide Summarising, not applying Pages on what the theory says, no sentence on your study Keep only the parts of the theory your study uses Federation University Australia (2025) Too many theories A separate theory for every variable Use one main theory, or integrate several into one explanation Northcentral University A theory that does not fit A famous theory that predicts nothing about your data Select the theory that best aligns with the research question Walden University Library Undefined constructs “Engagement” used with no stated meaning Define each concept and variable for your study Concordia University Chicago Library Dropped after Chapter 2 The theory never returns in the discussion Revisit the theory when you interpret the findings Northcentral University Citing theorists you have not read An original text cited from someone else’s summary Read the original, or cite the source you read as a secondary citation Litrevu guide to secondary citations Northcentral University’s guidance on the second mistake is blunt: “Do not select a separate framework for each variable/construct under examination.” If several theories guide the study, Northcentral asks students to integrate them rather than describe each one separately. For the last mistake, the Litrevu guide on how to cite a source cited in another source shows how to credit a theorist you met only through a review. ## How do I find the theories in my papers with an AI assistant for writing backed by sources? The theories behind a theoretical framework are already named in the papers you are reading; the hard part is seeing which theories recur across thirty or more PDFs. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. For a theoretical framework, the workflow on your own papers runs in four moves: - Add the papers you are working from. Upload the PDFs, paste a DOI or arXiv link, or pick open-access papers Litrevu finds on your topic. - Ask which theories the papers use. Ask, for example, “Which theory does each study use to explain engagement?” Every answer cites the passage it came from, and Litrevu says when your papers do not cover a question. - Line the studies up in a comparison table. Compare papers side by side, with citations, to see which theory each study used and where the studies agree or differ. Open any citation to see the passage highlighted on the PDF page. - Check your own framework paragraph. Paste a paragraph you wrote, and each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover the claim, not that the literature is silent, so it is a cue to read wider. The judgement stays with the student. You choose the theory, read the originals, defend the fit to your supervisor and write the chapter. Check your university’s AI policy and declare how you used AI. ## Frequently asked questions ## How do I choose a theory for my research? Choose the theory that best explains the relationship your research question asks about, then justify the choice against one or two alternatives. Start from the concepts in your question and note which theories recent studies on those concepts use. Federation University Australia (2025) asks researchers to explain why they chose a theory over another approach and to show the theory is linked to their aims. ## Can I use more than one theory in a theoretical framework? Yes, a theoretical framework can combine two or more theories, as long as the theories are integrated into one explanation. Northcentral University tells dissertation students to integrate multiple frameworks rather than describe each separately, and not to select a separate framework for each variable. One well-applied theory is usually stronger than several loosely attached ones. ## Does qualitative research need a theoretical framework? Yes, qualitative studies use theoretical frameworks too, and the theory should guide the study without boxing in what the data can show. Federation University Australia (2025) states that theoretical frameworks are used in both quantitative and qualitative studies. Collins and Stockton (2018) , in the International Journal of Qualitative Methods, argue that theory shapes almost every aspect of a qualitative study but caution against relying on theory so heavily that emergent findings are missed. ## Is the theoretical framework part of the literature review? The theoretical framework is often placed inside the literature review chapter or in a section straight after the literature review. Federation University Australia (2025) describes both placements for research theses. In US five-chapter dissertation templates such as Northcentral University’s , the framework is summarised in Chapter 1 and discussed in full in Chapter 2. ## What is the difference between a theory and a theoretical framework? A theory is a general explanation of why a phenomenon happens; a theoretical framework is the way one study applies that theory to its own question. Vassar College Libraries defines a theory as an explanation for the nature and causes of a phenomenon, and a theoretical framework as a guiding principle that gives research structure or an explanation to a problem. The framework adds what the theory alone does not: your definitions, your setting and your propositions. ## Does a theoretical framework need a diagram? A theoretical framework does not strictly need a diagram, but a simple diagram of constructs and arrows makes the predicted relationships easy to check. A diagram is more typical of a conceptual framework, which Miles and Huberman (1994), quoted by the University of Melbourne Library, describe as explaining the main things to be studied “either graphically or in narrative form”. If your programme asks for both frameworks, check with your supervisor whether one diagram can serve both. ## Start with the papers you already have The theory your framework needs is usually named somewhere in the papers on your desk; the work is finding the recurring ones, reading the originals and defending the fit. Add the papers you are working from, ask which theories they use, open the passage behind every answer, and check your own framework paragraph against your sources. The judgement and the writing stay yours. Add your papers and ask which theories they use . Free to start, no credit card required. ## Related Guides - How to Write a Conceptual Framework (With Examples) - How to Write a Research Proposal: 7 Sections + Template - How to Write a Methodology Section (Complete Guide with Examples) - How to Write a Research Question (Step-by-Step, With Examples) --- # Is Paraphrasing Allowed in Academic Writing? How to Do It URL: https://litrevu.com/blog/how-to-paraphrase-in-academic-writing Category: Writing Sections Published: 2026-07-18 Summary: Yes, if you restate the idea in your own words and structure and cite it. A 5-step method, a worked example, and where paraphrase turns into patchwriting. Writing Sections ## Is Paraphrasing Allowed in Academic Writing? How to Do It By Samuel de Bruyn · 18 July 2026 · 10 min read · Updated 25 October 2026 Paraphrasing is how you bring a source into your own writing without quoting it word for word. Done well, it proves you understood the idea. Done badly, it slides into plagiarism even when you never meant to copy. Here is how to paraphrase properly, and stay honest while you do it. Most of what you write in a research paper is paraphrase. You read what other people found, you explain it in your own words, and you point back to where it came from. It is the everyday skill behind every literature review, every introduction, every discussion of what the field already knows. It is also where a lot of honest students get into trouble. Nobody sets out to plagiarize. But when you are tired and the deadline is close, it is easy to keep the author’s sentence and swap a few words, which looks like paraphrasing and is actually a form of copying. The fix is not a trick. It is a method, and a clear idea of where the line sits. This guide covers what paraphrasing really is, how it differs from quoting and summarizing, the patchwriting trap that catches so many students, a five-step method that works, worked before and after examples, when to paraphrase instead of quote, why a paraphrase still needs a citation, and the five mistakes to avoid. ## What Paraphrasing Actually Is To paraphrase is to restate someone else’s idea in your own words and your own sentence structure, at roughly the same length as the original. You are not shortening the idea and you are not copying it. You are re-expressing it, which you can only do once you actually understand it. That last part is the point. A good paraphrase is proof of understanding. If you can explain a finding in fresh words without looking at the source, you have understood it. If you can only shuffle the author’s words around, you have not, and the reader can usually tell. Paraphrasing, quoting, and summarizing are three different moves: - Paraphrase puts one idea into your own words at a similar length, and always carries a citation. - Quote copies the exact words inside quotation marks, with a citation and usually a page number. - Summarize condenses a longer passage or a whole study down to its main points in your own words, also with a citation. All three belong in academic writing, and all three need attribution. The difference is scope and wording. A paraphrase stays close to a single point; a summary steps back to the big picture; a quote is reserved for the rare sentence whose exact wording matters. If you want the full picture on attribution across styles, our guide to how to cite sources in a research paper walks through six referencing systems. ## Paraphrasing vs Patchwriting: The Line That Trips Students Patchwriting is the name for the thing that feels like paraphrasing but is not. You keep the author’s sentence, delete a word here, drop in a synonym there, and rearrange a clause. The result reads like the original with a light coat of paint. Even with a citation attached, most institutions treat patchwriting as a form of plagiarism, because the words and the structure are still the author’s. It is also what pushes up a Turnitin similarity score : the author’s words are still there, so the passage matches the source, citation or not. The reason it is so common is that it happens by accident. When the source sentence is sitting right in front of you, your brain anchors to it. You end up editing their sentence instead of writing your own. The cure is simple and it is built into the method below: look away from the source before you write. Original “Regular physical activity has been shown to significantly reduce symptoms of anxiety in young adults.” Patchwriting (not acceptable) “Regular exercise has been proven to considerably lower symptoms of anxiety in young people.” Same structure, same order, a few swapped words. This is still the author’s sentence. Genuine paraphrase (acceptable, with citation) “Among people in their late teens and twenties, exercising consistently appears to ease anxiety, according to a body of research on the topic (Author, 2022).” Different sentence shape, different phrasing, the idea intact, and the source named. A useful test: if you put your version next to the original and the sentences march in the same order with the same skeleton, you have patchwritten. If the shape is genuinely yours and only the idea survives, you have paraphrased. ## How to Paraphrase in Five Steps The steps below are designed to stop patchwriting before it starts. The core move is to separate reading from writing so you are never copying while you type. ## 1. Read it until you actually get it Read the passage more than once, until you could explain it to a friend who has never seen it. If a term is doing heavy lifting, make sure you understand it. You cannot paraphrase what you have not understood, and trying to is exactly how patchwriting happens. ## 2. Look away from the source Close the PDF, or cover the sentence. This one habit does more for honest paraphrasing than any thesaurus. With the original out of sight, your brain has to reach for its own words instead of editing theirs. ## 3. Write the idea from memory, in your own voice Say the point to yourself as if you were teaching it, then write that down. Change the sentence structure, not just the words. Start from a different part of the idea, split one long sentence into two, or turn a list into a sentence. The wording should feel like the rest of your paper, not like a graft from somewhere else. ## 4. Check your version against the original Now bring the source back and compare. Did you accidentally keep a distinctive phrase? Did you change the meaning or overstate the finding? A paraphrase has to be faithful as well as fresh. Fix any phrase that is too close, and make sure you did not turn a cautious “may reduce” into a confident “reduces.” ## 5. Add the citation A paraphrase without a citation is still plagiarism, even though the words are yours, because the idea is not. Attribute it in whatever style your department uses. If you are working in APA or Harvard, our APA citation guide and Harvard referencing guide show the exact in-text format for a paraphrased point. ## A Worked Example, Start to Finish Here is the whole method on a single passage, so you can see the weak attempt and the strong one side by side. Original source “Students who receive timely feedback on their work are more likely to revise effectively and to retain the underlying concepts over the long term.” Weak paraphrase (too close) “Students who get prompt feedback on their work are more likely to revise well and to remember the underlying concepts in the long term (Author, 2021).” The citation is there, but the sentence is the original’s twin. Same order, same frame, swapped synonyms. Not acceptable. Strong paraphrase (own structure) “Feedback seems to work best when it arrives quickly. When students hear how they did soon after submitting, Author (2021) found they revised more successfully and held on to the core ideas for longer.” The idea is intact, the sentence is rebuilt from a different starting point, and the source is named in the text. This is a paraphrase you can stand behind. Notice the strong version even changed where the sentence begins. The original led with the students; the paraphrase leads with the feedback. Reordering the idea like that is one of the easiest ways to break free of the source’s structure. ## When to Paraphrase, Quote, or Summarize Paraphrase should be your default. Reach for a quote only when the exact words matter, and summarize when you need the gist of something long. This table is a quick guide. Move Use it when Scope Paraphrase You want to use an idea and show you understood it One point Quote The precise wording is the evidence, or it is a definition or a memorable line One sentence Summarize You need the overall findings of a long section or a whole study Many points In practice, a good paper is mostly paraphrase and summary with the occasional quote for emphasis. If your draft is a chain of quotations, step back and paraphrase more; a wall of quotes tends to read as if the sources are writing the paper for you. The same balance matters in a literature review , where the goal is to weave many sources into your own argument rather than list them one quote at a time. ## A Paraphrase Still Needs a Citation This is the single most misunderstood rule in academic writing. Putting an idea in your own words does not make it your idea. The words are yours; the finding, the argument, or the data belongs to the person who produced it. Leave off the citation and you have claimed their work as your own, which is plagiarism no matter how original the phrasing. The only things you do not need to cite are your own analysis and genuine common knowledge, the facts any reader in the field would already accept without a source. When in doubt, cite. Over-citing looks careful; under-citing looks like theft. In short: Your words plus their idea equals a paraphrase that must be cited. Their words plus their idea equals a quote that must be cited. The only combination that needs no citation is your words plus your idea. Getting this right is also what keeps you on the safe side of the shift many universities are making toward process-based evaluation , where they care less about a detector score and more about whether you can show your reading, your notes, and your thinking. Honest paraphrasing with clear citations is exactly the trail that proves the work is yours. ## 5 Common Paraphrasing Mistakes ## 1. Swapping words while keeping the sentence The classic patchwriting error. If your version and the original line up clause for clause, changing the vocabulary does not save it. Rebuild the sentence, do not redecorate it. ## 2. Leaning on a synonym tool Running a sentence through a synonym swapper is patchwriting with extra steps, and it usually produces stilted, wrong-register phrasing that a marker spots instantly. It also skips the part that matters: understanding the idea well enough to say it yourself. ## 3. Forgetting the citation A perfectly worded paraphrase with no source is still plagiarism. Attach the citation as you write, not later, so none slip through when you are tired. ## 4. Changing the meaning In the rush to sound different, it is easy to overstate a finding or drop a caveat. If the author wrote “may contribute to,” you cannot paraphrase it as “causes.” A paraphrase must stay true to what the source claimed. ## 5. Paraphrasing something you did not read Paraphrasing another paper’s summary of a study, then citing the original as if you read it, spreads errors and misrepresents your sources. Read the paper you cite. If you can only find it quoted elsewhere, cite it as cited in the source you actually read. Doing this properly starts with finding the real sources and keeping them organized so you always know which paper a paraphrase came from. ## Paraphrase From Your Own Sources, With the Trail Intact The hardest part of honest paraphrasing is holding a stack of papers in your head and keeping track of which idea came from where. That is what Litrevu is built for. You upload the real papers you are working from and ask what they say. Every answer opens to the exact passage it came from, so you read the original before you paraphrase it, and the idea and its citation stay tied together. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. You can also paste a paragraph you wrote and see which of its claims your papers back, with the passage that decides each one. The thinking and the writing stay yours. Try it free, no credit card needed. Try Litrevu free ## Related Guides - How to Cite Sources in a Research Paper (6 Styles Compared) - How to Turn Your Research Papers into a Literature Review - 10 Common Literature Review Mistakes (and How to Avoid Them) - Litrevu for Research Papers --- # How to Find a Research Gap: Steps, Types and Examples URL: https://litrevu.com/blog/how-to-find-a-research-gap Category: Literature Review Published: 2026-07-18 Summary: A research gap is a question your field has not answered yet. Find one in recent reviews and limitations sections, then log each study in a matrix. Literature Review ## How to Find a Research Gap: Steps, Types and Examples By Wasim Ghoor · 18 July 2026 · 13 min read · Updated 1 November 2026 A research gap is a question your field has not yet answered, or has not answered for a particular population, setting, method or theory. To find one, read recent reviews first, then the limitations and future-research sections of the newest studies, log each study in a matrix until a pattern of missing or conflicting evidence shows, and write that pattern as a one-sentence gap statement you check against the most recent papers. Research gap (definition): a specific question that existing studies leave unanswered, answer inconsistently, or answer only for a different population, setting, method or theory. The gap is what your study adds; the research question is the question you ask to fill it. Step Where to look What you write down 1. Read recent reviews Literature reviews, systematic reviews, meta-analyses The open questions each review names 2. Read the ends of empirical papers Limitations, discussion, “future research” sections Each limitation and each suggested next study, in one line 3. Build a matrix One row per study; columns for population, setting, method, theory, finding Blank cells, repeated designs, findings that disagree 4. Name the gap type Confusion, neglect, application (Sandberg and Alvesson, 2011) Which type the pattern is 5. Write and test the gap statement The newest papers on the exact gap Known, missing, why it matters, in one sentence ## What is a research gap? A research gap is a specific question that the existing literature has not answered, has answered inconsistently, or has answered only for a different group, place, method or theory. The research gap is the space your study fills; the research question is the question you write once you have found that space. Why does the distinction matter? Think of a map with one blank region. The topic is the whole map (“hybrid work and productivity”). The research gap is the blank region, for example an outcome nobody has measured in hybrid software teams (a format illustration, not a claim about the literature). The research question is the route you plan across it. Researchers have studied how gaps are actually used. Sandberg and Alvesson reviewed 52 articles from four leading organisation-studies journals (Administrative Science Quarterly, Journal of Management Studies, Organization Studies and Organization, 2003 to 2005) and found that “gap-spotting is by far the most common way of constructing research questions” in organisation studies ( Sandberg and Alvesson, 2011, Organization 18(1), 23 to 44 ). Naming a research gap is therefore the convention most published research in that field follows. ## What are the types of research gaps? The two most useful published typologies are Sandberg and Alvesson’s three modes of gap-spotting (confusion, neglect and application) and the four reasons for gaps in health-evidence reviews set out by Robinson and colleagues at Johns Hopkins for the US Agency for Healthcare Research and Quality (insufficient or imprecise information, biased information, inconsistency or unknown consistency, and not the right information). The table below sets the two typologies side by side, with a format illustration of each gap sentence. Gap type What it looks like in the papers Gap sentence (format illustration) Source of the label Confusion (contradictory evidence) Credible studies reach opposite findings and nobody has explained why “[Study A] and [Study B] report opposite effects of [X] on [Y], and no study has tested whether [Z] explains the difference.” Sandberg and Alvesson: confusion spotting; Robinson: inconsistency or unknown consistency Overlooked area A well-studied topic has one aspect nobody has examined “Despite extensive work on [topic], [aspect] has not been examined.” Sandberg and Alvesson: neglect spotting Under-researched area (population or setting) The question is answered for one group or place but not another “[X] is well documented in [population A] but has not been studied in [population B].” Sandberg and Alvesson: neglect spotting; Robinson: population and setting Lack of empirical support A claim is widely repeated but rarely tested “[Claim] is widely assumed but has little direct empirical test.” Sandberg and Alvesson: neglect spotting Application (theory not yet applied) A theory or perspective has not been used in an area “[Theory] has not been applied to [phenomenon].” Sandberg and Alvesson: application spotting Insufficient or imprecise evidence Too few studies, or studies too small to draw a firm conclusion “The evidence on [X] rests on [few / small] studies, so the effect size remains uncertain.” Robinson: insufficient or imprecise information Biased evidence Existing studies share a design weakness “Every study of [X] relies on [self-report / one design], so [risk] cannot be ruled out.” Robinson: biased information Not the right evidence Studies measure outcomes that are not the ones that matter for practice “Studies of [X] measure [outcome A], but none measures [outcome B].” Robinson: not the right information Sandberg and Alvesson define confusion spotting as an effort “to spot some kind of confusion in existing literature”, neglect spotting as an effort to “identify a topic or an area where no (good) research has been carried out”, and application spotting as a search for “a shortage of a particular theory or perspective in a specific area of research” ( Sandberg and Alvesson, 2011 ). Neglect spotting was the most common mode in their sample. Robinson’s four reasons come from a framework for identifying gaps from systematic reviews ( Robinson, Cochrane Colloquium abstract, 2013 ; full report: Robinson, Saldanha and McKoy, Frameworks for Determining Research Gaps During Systematic Reviews , AHRQ Methods Future Research Needs Report No. 2, 2011). The bracketed sentences are format illustrations, not real findings: replace every bracket with the studies in your own library. ## How do you find a research gap step by step? You find a research gap by reading in a fixed order: recent reviews first, then the limitations and future-research sections of recent empirical papers, then a matrix that puts the studies side by side. Walden University’s library gives the same two starting points: “Look for literature reviews, systematic reviews, and meta-analyses” and “Look closely at each article’s limitations, conclusions, and recommendations for future research” ( Walden University Library, archived April 2025 ). ## 1. Start from recent reviews A review article has already done the first sweep of a field and often ends with a list of open questions. Search your databases for “[your topic] systematic review” or “[your topic] meta-analysis”, sort by date, and read the conclusions of the three most recent reviews before any single study. The guide on how to read research papers quickly for a proposal shows which parts of a paper to read first. ## 2. Read the ends of empirical papers Authors state what their study could not do in the limitations section and what should come next in the future-research section. The Northern Territory Health Library’s research toolkit tells researchers to read the “Discussion and Suggestions for Future Research sections of articles” to synthesise what is known and unknown ( NT Health Library ). Copy each limitation into a single line with the paper’s author and year. ## 3. Log every study in a matrix A literature review matrix has one row per study and one column per feature: population, setting, method, theory and main finding. Research gaps show up as blank cells, a column where every row says the same thing, or a findings column that disagrees with itself. Müller-Bloch and Kranz, who analysed how 40 recent literature reviews identified their gaps, argue that qualitative reviews lack guidelines for identifying gaps rigorously and replicably ( ICIS 2015 Proceedings ); a matrix makes the route from papers to gap traceable. The free Literature Review Matrix at the end of this guide builds the table from your own PDFs. ## 4. Name the gap type Match the pattern in the matrix to one of the eight gap types: conflicting findings are a confusion gap, a missing population is a neglect gap, an unused theory is an application gap. Naming the type tells you how to phrase the gap statement and what kind of study would fill it. ## 5. Write the gap statement, then test it Write one sentence: what is known, what is missing, and why filling the gap matters. Then search for the exact gap, sorted by newest first, because a paper published last month can close it. The guide on whether your research question has already been answered covers that check. ## Where do research gaps appear in a paper? Research gaps appear in four predictable places in a published paper: the limitations section, the future-research or recommendations section, the end of the discussion where authors compare their results with earlier studies, and the introduction of a recent paper, where authors name the gap their own study fills. Read those four places first and copy each candidate gap into your matrix. Part of the paper What signals a gap Typical wording Limitations Small sample, one site, one design, short follow-up “This study was limited to…” Future research or recommendations The authors’ own suggestion for the next study “Future research should…”, “Further work is needed…” End of the discussion Results that conflict with earlier studies, left unexplained “In contrast to [earlier study]…” Introduction of a recent paper The gap the authors claim to fill, which tells you what was open until recently “However, less attention has been paid to…” The phrase “However, less attention has been paid to…” comes from the University of Massachusetts Amherst Writing Center’s summary of John Swales’s Create a Research Space (CARS) model, in which authors establish a niche by showing “some kind of gap, shortcoming, or limitation in existing work” ( UMass Amherst Writing Center ). Reading the introductions of the newest papers therefore shows which research gaps other researchers have just claimed. ## How do you write a research gap statement? A research gap statement is one or two sentences that say what is already known, name precisely what is missing, and say why filling the gap matters. In Swales’s CARS model, as summarised by the UMass Amherst Writing Center, a gap statement is Move 2, “Establishing a Niche”, which has four options: counter-claiming, indicating a gap, question-raising, and continuing a tradition ( UMass Amherst Writing Center ). Weak gap statement Why the statement is weak Strong gap statement (format illustration) “More research is needed on social media and mental health.” Names a topic, not a missing piece “While the link between [social media use] and [anxiety] is documented in [population A], no study in our search examined [population B], where [access pattern] differs.” “Not much is known about remote work.” Vague and unverifiable “Studies of remote-work productivity rely on self-report surveys ([Author, Year]; [Author, Year]); none combines survey data with objective output measures in [setting].” “The literature is unclear on exercise and depression.” Does not say what is unclear or why “[Trial A] and [Trial B] report opposite effects of [aerobic exercise] on [depression severity], and no study has tested whether [programme length] explains the difference.” A strong research gap statement follows a three-part pattern: known, missing, why it matters. Write “limited” or “no study in our search” rather than “no research exists”, because a marker who knows the field may know the one paper you missed. ## How do you turn a research gap into a research question? You turn a research gap into a research question by asking directly for the missing piece the gap names, using the same population, setting, method or outcome. Robinson’s framework describes each gap by PICOS, meaning Population, Intervention, Comparison, Outcomes and Setting ( Robinson, 2013 ), and those five elements map straight onto a question. For example (format illustration): the gap “studies measure [outcome A] in [population] but none measures [outcome B]” becomes the question “How does [intervention] affect [outcome B] in [population] compared with [comparison] in [setting]?” Every bracket in the question should trace back to a blank cell in your matrix. The research gap then does two more jobs in a proposal: the gap justifies the method, because the design has to supply what was missing, and the gap anchors the research rationale . The guide on how to write a research question covers wording and scope, and the guide on how to write a research proposal shows where the gap sits among a proposal’s seven sections. ## How do you know a research gap is real? A research gap is real when a fresh search for the exact gap, sorted newest first, finds no study that answers it, and when the gap passes Walden University Library’s four tests: a research gap “should be” justified, grounded in the literature, original and “amenable to scientific study” ( Walden University Library, archived April 2025 ). A gap that fails any of the four needs narrowing or replacing. Five ways a research gap turns out weak: - The gap is a topic. “AI in education” names a field, not a missing piece. If the gap could describe a hundred studies, the gap is still a topic. - The gap was not searched for. A claim of “no research” collapses when a marker names one paper. Search the exact gap before claiming the gap. - The gap is too large for one study. A gap the size of a field cannot be closed by one thesis; narrow the population, setting or outcome until the gap fits your time and access. - The gap does not matter. Some questions are unanswered because nobody needs the answer. State who benefits when the gap is filled. - The gap came from three papers. A research gap found after very little reading usually misses the studies that already filled it. When two studies in your matrix disagree, the guide on what to do when two studies contradict each other explains how to treat the disagreement as evidence rather than noise. ## Can an AI assistant help you find a research gap in your own papers? An AI assistant can help with the reading and the lining up of evidence across your papers, but the decision about which research gap is real and worth filling stays with you. The useful test of any tool is whether every answer points to the passage it came from, so you can read the passage yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Applied to the five-step method for finding a research gap, the Litrevu workflow is: - Add the papers. Upload the reviews and recent studies as PDFs, paste a DOI or arXiv link, or pick open-access papers Litrevu finds on your topic. - Ask about limitations. Ask “What limitations and future research do these papers state?” Litrevu answers with citations only from your papers and says when the papers do not cover a question. Open any citation to see the passage highlighted on the PDF page. - Compare the studies. Ask for a side-by-side table of population, method and main finding, with citations, to see where the studies agree and differ. - Check the gap statement. Paste your draft gap statement. Each claim comes back Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your own library does not cover a claim. “Not in your papers” is not proof that a research gap exists in the wider literature, so a newest-first search for the exact gap is still needed before you claim the gap. For a longer walk-through, see how to use AI to find a research gap in your own papers . ## Frequently asked questions about finding a research gap ## How do I know a research gap is real? Search for the exact gap, sorted by newest first, in the main database for your field. If no study answers the gap, check it against Walden University Library's four tests: justified, grounded in the literature, original and amenable to scientific study. Phrase the gap as "limited" or "no study in our search" rather than "no research exists". ## Is a research gap the same as a problem statement? No. A research gap is a missing piece of knowledge in the literature, while a problem statement describes the problem in practice or in the field that makes the missing knowledge matter. A proposal usually needs both: the problem statement says why the issue matters, and the research gap says what the existing studies have not yet answered about the issue. ## Where does the research gap go in a thesis or proposal? The research gap goes at the end of the introduction, after the summary of what is known and before the research question, which is Move 2 ("Establishing a Niche") in Swales's CARS model. In a research proposal, the gap is stated briefly in the introduction and argued in full in the literature review and the rationale. ## Can a replication study fill a research gap? Yes. A replication that tests a published finding on different data, a different period or a different population fills a generalisability gap. The Chair of Public Economics and Economic Policy at TU Darmstadt , for example, lets master's students write a replication study as their thesis, including "replication with focus on generalizability" on a different time or population. ## How recent should the papers be when looking for a research gap? There is no single cut-off: neither Walden University Library's guide nor the NT Health Library's toolkit sets one, and expectations vary by field and department. What matters is that the final check for the gap covers the newest papers, because a study published in the last few months can close it. The guide on how recent sources need to be in a literature review covers department expectations. ## What are the main types of research gaps? Sandberg and Alvesson (2011) name three modes of gap-spotting: confusion (conflicting findings), neglect (an overlooked or under-researched area, or a claim lacking empirical support) and application (a theory not yet applied). Robinson and colleagues (2011) add four reasons from health-evidence reviews: insufficient or imprecise information, biased information, inconsistency or unknown consistency, and not the right information. ## What should you do first to find your research gap? Open the three most recent review articles on your topic and copy every open question and limitation they list into a matrix, one row per study. Then look across the rows for the patterns that signal a research gap: blank cells, repeated designs and findings that disagree. When the reviews and recent studies are in one place, Litrevu can line up what each paper says, with every claim linked to its passage, so you can see the pattern and decide on the gap yourself. Add your papers and ask them anything . Free to start, no credit card required. ## Related Guides - How to Write a Research Proposal: 7 Sections + Template - How to Write a Rationale for a Research Study + Examples - How to Write a Problem Statement for a Research Paper (With Examples) - How to Write a Literature Review for a Research Proposal (2026 Guide) - Research Gap vs Research Problem: Differences in One Table --- # How to Write a Research Question (Step-by-Step, With Examples) URL: https://litrevu.com/blog/how-to-write-a-research-question Category: Getting Started Published: 2026-07-18 Summary: How to write a strong research question for your thesis or paper. The FINER test, PICO and PEO frameworks, weak vs strong examples, and the mistakes to avoid. Getting Started ## How to Write a Research Question (Step-by-Step, With Examples) By Jessica McLaren · 18 July 2026 · 11 min read Your research question is the single sentence your entire paper exists to answer. Get it right and the rest of the work has a spine to grow around. Get it wrong and you write in circles. Here is how to build one that holds. Almost every stuck research project has the same root problem. Not a weak argument, not thin sources, not bad writing. The research question was never sharp enough to begin with. When the question is vague, everything downstream turns to mush: the literature review has no focus, the methodology has nothing to serve, and the results have no target to hit. A good research question does the opposite. It tells you which papers to read and which to skip. It tells you what data you need. It tells your marker, in one line, exactly what you set out to find. That is a lot of work for one sentence, which is why it pays to write it carefully. This guide walks through what a research question actually is, what separates a strong one from a weak one, and a step-by-step process for writing yours. It includes the FINER test, the PICO and PEO frameworks, worked examples across different fields, and the five mistakes that send questions back for revision. ## What Is a Research Question? A research question is the specific, focused question your study sets out to answer. It defines the scope of your project and gives every other part of the paper a job. Your introduction explains why the question matters, your literature review shows what is already known about it, your methodology describes how you will answer it, and your results and discussion report what you found. Think of it as the anchor of the whole document. A topic is broad, like “social media and mental health.” A research question is narrow and answerable, like “How does daily Instagram use relate to reported anxiety in first-year university students?” The topic could fill a library. The question can be answered in a single study. A research question does four things at once: - Sets your scope so you know what belongs in the paper and what does not. - Directs your reading toward the sources that actually speak to it. - Shapes your method by implying what kind of evidence would answer it. - Signals your contribution by pointing at a gap that has not been closed yet. ## Research Question vs Thesis, Hypothesis, and Aim These four terms get tangled constantly, and mixing them up is one of the fastest ways to confuse a marker. They are related, but they are not the same thing. Research question The question you are answering, phrased as a question. “How does remote work affect team collaboration in software teams?” Research aim A statement of purpose, phrased as a goal. “This study aims to examine how remote work affects collaboration in software teams.” Same idea, different grammar. Hypothesis A testable prediction of the answer, used mainly in quantitative work. “Remote work reduces the frequency of informal collaboration.” You test it and it is supported or not. Thesis statement Your answer to the question, stated as a claim, usually in the introduction after the study is done or planned. Our thesis statement guide covers this in full. The simplest way to keep them straight: the research question asks, the hypothesis predicts, and the thesis answers. Most student papers lead with a research question and one or more sub-questions, and add hypotheses only if the study is quantitative. ## What Makes a Research Question Good? The FINER Test Before you commit to a question, run it through the FINER test, a checklist widely used in health and social science research. A strong question passes all five. - Feasible. Can you actually answer it with the time, access, data, and skills you have? A brilliant question you cannot investigate is not a research question, it is a wish. - Interesting. Does it matter to you and to people in your field? You will spend weeks with this question, so it should be one you genuinely want answered. - Novel. Does it add something that is not already settled? It can confirm, refute, or extend earlier work, but it should not simply repeat a study that has been done many times. - Ethical. Can the study be run without harming participants or breaching guidelines? If it needs ethics approval, would it get it? - Relevant. Does the answer matter to the field, to practice, or to policy? Relevance is what makes examiners care about your contribution. On top of FINER, a good question is usually specific, focused on one issue, and open enough that it cannot be answered with a plain yes or no. “Does exercise help depression?” is a yes-or-no dead end. “How does a twelve-week aerobic exercise program affect depression severity in adults aged 18 to 30?” invites real analysis. ## How to Write a Research Question, Step by Step You do not arrive at a good question by staring at a blank page. You narrow your way to it. Here is the sequence that works for most students. ## 1. Start with a broad topic you care about Begin with the general area, not the question. “Renewable energy adoption,” “adolescent literacy,” “small business financing.” At this stage broad is fine, because you are about to narrow it. If you are still at the very start of the paper, our guide on how to start a research paper covers choosing a topic in more depth. ## 2. Read enough to see what is already known You cannot find a gap in a field you have not read. Do a focused first pass through recent reviews and key papers to map out what has been established, what is contested, and what keeps getting flagged as “future work.” Our guide on how to find academic sources shows where to look, and how to write a literature review explains how to organise what you find. ## 3. Find the gap A research gap is a specific question the existing literature has not answered, or has not answered for your context, population, or time period. Watch for a method that has not been applied to a problem, a group that has been studied in one country but not another, or a finding that two studies disagree on. That gap is where your question lives. ## 4. Narrow and focus Take your broad topic and add limits: a population, a setting, a time frame, a variable, an outcome. Each limit you add makes the question more answerable. “Social media and teenagers” becomes “how nightly Instagram use relates to sleep quality in 15 to 17 year olds.” The scope shrinks and the study becomes possible. ## 5. Draft it with a framework Now put it into words using one of the frameworks in the next section. Frameworks are not mandatory, but they force you to name the moving parts of your question so nothing important is left vague. Draft two or three versions and pick the sharpest. ## 6. Pressure-test and refine Run the draft through the FINER test. Can you answer it with what you have? Is it a real question and not a yes-or-no? Does it hide two questions inside one? Read it aloud to someone who is not in your field. If they can restate what you are trying to find out, the question is clear. If they cannot, keep cutting. ## Frameworks That Make It Easier: PICO, PEO, and SPIDER Frameworks turn a fuzzy idea into a structured question by making you fill in specific slots. Pick the one that fits your kind of study. ## PICO (quantitative and clinical) PICO stands for Population, Intervention, Comparison, and Outcome. It suits studies that test the effect of something. Population: adults with type 2 diabetes Intervention: a mobile app for glucose tracking Comparison: standard paper logbooks Outcome: average blood glucose over three months “In adults with type 2 diabetes, does a mobile glucose-tracking app, compared with paper logbooks, improve average blood glucose over three months?” ## PEO (qualitative) PEO stands for Population, Exposure, and Outcome. It fits qualitative work that explores experiences rather than testing an intervention. Population: first-generation university students Exposure: the transition into their first year Outcome: their sense of belonging “How do first-generation university students experience their sense of belonging during the transition into first year?” ## SPIDER (qualitative and mixed methods) SPIDER covers Sample, Phenomenon of Interest, Design, Evaluation, and Research type. It is useful when the design and the type of evidence matter as much as the topic, for example in a synthesis of qualitative studies. The point of any of these frameworks is the same: name the parts, and the question writes itself. ## Qualitative, Quantitative, and Mixed Methods Questions Your research question and your method have to match. In fact, the wording of your question already hints at the method, which is why the two should be written together. The verb you choose usually gives it away. ## Quantitative questions These measure, compare, or test relationships between variables. They tend to start with “how much,” “how many,” “what is the effect of,” or “what is the relationship between.” Example: “What is the effect of class size on exam performance in secondary schools?” ## Qualitative questions These explore meaning, experience, and process. They tend to start with “how,” “why,” or “what does it mean to.” Example: “How do nurses describe moral distress during night shifts?” ## Mixed methods questions These combine both, often as a main question with quantitative and qualitative sub-questions. Example: “How does a peer-mentoring program affect student retention, and how do students experience the support it provides?” Once the question is set, our methodology section guide covers how to design the study that answers it. ## Weak vs Strong Research Questions The difference is almost always specificity. A weak question is broad, vague, or answerable with a single fact. A strong one names the who, the what, and the context. Compare these. Weak “Is technology good for education?” Strong “How does the use of interactive whiteboards affect student engagement in secondary school mathematics lessons?” Weak “What are the effects of climate change?” Strong “How has rising average temperature affected wheat yields in the North West province of South Africa since 2000?” Weak “Does social media cause anxiety?” Strong “How is daily time spent on image-based social media associated with self-reported anxiety in first-year undergraduates?” Notice that every strong version adds limits: a population, a setting, a time frame, or a measurable variable. That is the whole move. Keep adding specificity until the question could realistically be answered by one study. ## How Many Research Questions Should You Have? For most projects, one main research question is enough, supported by two to four sub-questions that break it into answerable pieces. The main question captures the overall aim; the sub-questions map onto the sections of your analysis. Example structure: Main: How does hybrid working affect productivity in mid-sized technology firms? Sub 1: How do employees rate their own productivity under hybrid arrangements? Sub 2: How do managers measure team output under hybrid arrangements? Sub 3: Which factors do both groups say help or hurt productivity most? If you find yourself with five or six equally weighted main questions, your scope is probably too wide for a single paper. Choose the one that matters most and demote the rest to sub-questions or future work. ## 5 Common Research Question Mistakes ## 1. Too broad “How does poverty affect education?” is a topic, not a question you can answer in one study. Narrow it by population, place, and outcome until it fits your scope. ## 2. Too narrow or trivial The opposite problem. If the answer is a single number you could look up, or a fact with no room for analysis, there is nothing to research. Your question should require investigation, not a search engine. ## 3. A yes-or-no question “Does homework improve grades?” can be answered in one word, which leaves you nothing to write about. Rephrase it as a “how” or “to what extent” question so the answer has depth. ## 4. Two questions hiding in one “How does remote work affect productivity and mental health?” is really two studies. Pick the one that matters most, or split them cleanly into a main question and a sub-question. ## 5. Not grounded in the literature A question invented in isolation often turns out to be already answered, or impossible to place in the field. Ground it in what you have read so it clearly extends existing work. This is also where honest research starts: you build on real sources, you read every one, and you can point to exactly where your question came from. ## Where Your Research Question Fits The research question usually appears near the end of your introduction , right after you have established the background and the gap. From there it threads through the whole paper: the literature review justifies it, the methodology answers it, and the discussion returns to it to say whether you answered it and what that means. If you are mapping out the full shape of your paper, our research paper structure guide shows how every section connects back to the question, and the research proposal guide covers how to frame it before the study begins. Writing tip: Write your research question early, but treat it as a draft you revisit. It is normal for the question to tighten as you read more and learn what is actually answerable. A question that shifts once or twice during the project is a sign you are thinking, not a sign you got it wrong. ## Test Your Question Against Your Reading Once your research question is sharp, the next job is checking it against the literature: has it been answered already, and where does the evidence run out? That is what Litrevu is built for. You give it your question, upload the real papers you want to work from, and ask what they found, and every answer links back to a passage you can open and read yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The thinking stays yours. You set the question, you read the sources, you decide what is worth studying, and you do the writing. Try it free, no credit card needed. Try Litrevu free ## Related Guides - How to Write a Thesis Statement (With Examples) - How to Write a Research Paper Introduction (Step-by-Step) - Research Paper Structure: The Complete Guide for Students - Litrevu for Research Papers --- # How to Prove You Wrote Your Own Work: Building a Paper Trail for 2026 URL: https://litrevu.com/blog/how-to-prove-you-wrote-your-own-work Category: AI & Research Writing Published: 2026-07-18 Summary: Falsely accused of using AI, or worried you could be? Build a paper trail with version history, a research trail, and clear AI disclosure, and know what to do if you're accused. Insights ## How to Prove You Wrote Your Own Work: Building a Paper Trail for 2026 By Samuel de Bruyn · 18 July 2026 · 9 min read Somewhere right now, a student who wrote every word of their essay is sitting in a meeting trying to explain a number on a screen. Most of it is preventable, not by writing differently, but by keeping evidence of how you write. A detector flagged their work, they have no drafts to show, and the conversation has turned into their word against an algorithm. It is one of the most stressful things that can happen in a degree. The good news is that the evidence which protects you is the natural byproduct of doing the work honestly. You just have to stop throwing it away. ## Why this matters more in 2026 than it did last year Two things changed. First, AI use became normal. A 2026 HEPI survey found that around 95% of UK undergraduates now use generative AI in some form, and universities have largely stopped pretending they can ban it. The policy line at most institutions has shifted from “AI is prohibited” to “undisclosed AI use is a violation”. That shift puts the spotlight on you being able to show what you did, not just what you submitted. Second, detection tools lost a lot of their authority. We covered this in detail in AI detection is dead, and what's replacing it , but the short version is that dozens of universities have disabled or downgraded AI detectors after studies showed alarming false-positive rates, especially for students writing in English as a second or third language. In early 2026, a US court reportedly found that a detector score on its own did not meet the evidence standard for academic misconduct. Markers know this. So instead of asking a detector, more of them are asking students a simpler question: show me how this came to exist. Stanford, MIT and Oxford have started requiring what they call process portfolios, where students submit outlines, notes and revision history alongside the final paper. Even if your university has no such requirement, the logic behind it is the best protection you have. A finished essay says nothing about how it was made. A trail of drafts, searches, notes and edits says everything. So this guide covers two situations. The comfortable one: you're starting an assignment and want a paper trail from day one. And the uncomfortable one: you've already been accused, and you need to assemble evidence now. ## The strongest single piece of evidence: version history If you take one thing from this post, take this. Write in a tool that records version history automatically, and never turn that feature off. Google Docs does this by default. Open File, then Version history, then See version history, and you'll find a timestamped record of every editing session. Microsoft Word does the same if the document lives in OneDrive or SharePoint. Some universities give you access to either through your student account, so this usually costs nothing. What makes version history so convincing is the shape of it. A genuinely written essay accumulates in a messy, human way. You write a paragraph, delete half of it, come back two days later, move a section, fix typos at midnight. Hundreds of small edits spread over days or weeks. Pasted AI output looks completely different: large blocks of finished text appearing in seconds. A marker who opens your version history and sees three weeks of gradual, uneven progress has essentially seen your work happen. The conversation tends to end there. A few practical habits make this airtight. Start the document early, even if the first entry is just the essay question and three bullet points. Write in the document rather than drafting elsewhere and pasting in, because a paste looks like a paste regardless of where the text came from. And if you prefer writing offline, paste your day's work in at the end of each session so the timeline still builds. It's not as granular, but a document that grows in daily increments over a month still tells a believable story. ## Keep your research exhaust Version history proves you typed the words. Your research trail proves you did the thinking. Most students throw this evidence away without realising it was evidence. Keep the PDFs you downloaded, with their download dates. Keep your library database history if your university portal shows it. Don't clear your browser history mid-semester; those Google Scholar searches at 11pm are a record of genuine inquiry. If you take notes on paper, photograph them occasionally so they carry a date. Voice memos where you talk through an argument, messages to a friend where you complain about a confusing paper, emails to your supervisor asking about scope. All of it shows a process happened. If you already keep an organised source system, you're most of the way there. A source matrix with your own summary of each paper, in your own words, dated before the essay deadline, is a wonderful thing to be able to produce in an integrity meeting. If you don't have a system yet, our guide on how to organize research sources walks through a few that take minutes to set up, and how to find academic sources covers building the reading list itself. One caution here. Your research trail should be real, because a fabricated one is worse than none. The point of all this is not to construct an alibi. It's that honest work naturally produces evidence, and you just need to stop deleting it. ## If you used AI, say so, precisely This is where a lot of students get into trouble they didn't need to be in. Using AI within your university's rules and then staying quiet about it looks, from the outside, identical to hiding something. Check your module handbook or assignment brief for the AI policy. Most now sort AI use into allowed with disclosure, allowed for limited purposes, or prohibited. If disclosure is required, write the statement and be specific: which tool, for what task, and what you did with the output. “I used ChatGPT to suggest an outline structure, which I substantially revised” is a disclosure. “AI was used in this assignment” is a shrug. Keep your AI conversation logs too. If you brainstormed with a chatbot and your university permits that, the transcript showing you asked questions, pushed back, and then wrote something quite different is evidence in your favour. It demonstrates exactly the kind of engaged, documented use that policies are trying to encourage. For a fuller picture of what these tools can and can't legitimately do for a big writing task, Can AI write a literature review? is an honest look at the boundaries. ## Already accused? Do this, in this order First, don't panic, and don't fire off a defensive email within the hour. Read the accusation carefully and work out what the actual evidence is. If it's a detector score and nothing else, you are in a stronger position than you feel. Second, gather everything before you respond. Export your version history. Collect your notes, downloaded papers, search history and any AI transcripts. Put it in one folder, ordered by date. You're building a timeline that starts before the essay existed and ends at submission. Third, respond in writing, calmly, and ask for specifics: which passages are in question, and what evidence supports the claim. Attach your timeline. Offer to walk through the document history in person and to discuss the essay's content, because a student who can explain why paragraph four cites that particular study is doing something no language model did for them. Fourth, know your rights. Most universities have a formal procedure with a right to a hearing and an appeal, and many student unions provide free advice and will sit in meetings with you. Use them. You do not have to navigate this alone, and you shouldn't. And if the accusation involves your references, check them yourself before the meeting. Nothing sinks a defence faster than a citation that doesn't hold up, and nothing supports one better than a reference list where every source is real, relevant and traceable to your own reading. ## Make the paper trail a habit, not an emergency The students who handle this best are the ones who never have to think about it, because their normal workflow leaves footprints. Start documents early. Write where the history is recorded. Keep your sources and notes organised as you read, which pays off in better writing anyway, as anyone who has read our step-by-step literature review guide will recognise. Read your university's AI policy once at the start of the year instead of at 2am after an accusation email. There's a quieter benefit too. A visible process makes you a more deliberate writer. When you know your drafts tell a story, you notice the story: where you rushed, where you leaned on one source too heavily, where an argument appeared from nowhere and needs support. The paper trail that protects you is the same one that improves you. ## Ask Your Own Papers If you're staring at a folder of collected papers and not sure yet what they add up to, that's the moment Litrevu is built for. You upload the papers you've already gathered and ask them questions: what each one found, where they agree, how their methods differ. Every answer opens to the exact passage it came from, so you read the source itself. Once you have written a paragraph, paste it in and see which of your claims your papers back. The writing stays in your own document, where your version history records it. If your university asks you to declare AI use, say you used Litrevu for reading and checking; the free AI disclosure statement generator at the end of this guide gives you the wording. Litrevu is free to start, no credit card required. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Try Litrevu free ## Related Articles - AI Detection Is Dead. Universities Are Switching to Process-Based Evaluation. - Can AI Write a Literature Review? What You Need to Know (2026) - How to Organize Research Sources (So You Don't Lose Your Mind) - How to Find Academic Sources for Your Research Paper (2026 Guide) --- # How to Cite ChatGPT and AI Sources (APA, MLA, and Harvard) URL: https://litrevu.com/blog/how-to-cite-chatgpt-and-ai-sources Category: AI & Research Writing Published: 2026-07-18 Summary: How to cite ChatGPT and other AI tools in APA, MLA, and Harvard, with in-text examples for each. Plus what an AI citation can and cannot do for your paper. AI & Research Writing ## How to Cite ChatGPT and AI Sources (APA, MLA, and Harvard) By Wasim Ghoor · 18 July 2026 · 10 min read The moment you use an AI tool for your research, one question follows: how do you cite it? Here are the official APA, MLA, and Harvard formats, plus an honest look at what an AI citation can and cannot do for your paper. If you used ChatGPT, Claude, Gemini, or any other AI tool while working on your assignment, you may need to cite it. Not because someone is trying to catch you out, but because academic writing runs on one simple rule: you show where your words and ideas came from. AI is no different. Citing AI properly is not an admission of guilt. It is the opposite. It tells your marker that you used the tool openly and that you understand the difference between a tool that helped you and a source you are leaning on for evidence. Hiding it is what gets students into trouble. This guide covers the official citation formats for APA , MLA, and Harvard, with in-text examples for each. It also covers the part most guides skip: an AI citation does not turn AI-generated text into a credible source. You still need real, verifiable references. We will come back to that. One thing to check first Guidance for citing AI is still evolving, and every institution is slightly different. Before you rely on any format below, check your course handbook or ask your instructor. Some departments require a specific disclosure statement, some allow AI only for limited tasks, and some do not allow it at all. The policy always wins over a general guide. ## Do You Actually Need to Cite AI? Not every use of an AI tool needs a formal citation, but almost every use needs to be acknowledged somewhere. The line usually falls between using AI to produce content that ends up in your paper and using it as a background assistant. Cite or disclose it when you used AI to: - Generate text, ideas, or an outline that shaped what you wrote. - Produce code, data, or figures that appear in your work. - Summarise or paraphrase a passage that you then used. - Translate content that appears in your paper. If you only used AI to check your grammar, tidy your formatting, or brainstorm topics you did not end up using, many institutions ask for a short disclosure statement rather than a formal citation. When in doubt, a one-line note in your methods or acknowledgements section (“I used ChatGPT to help refine the phrasing of this section”) is safer than saying nothing. A formal citation has two parts, exactly like any other source: a reference list entry and an in-text citation. The formats below give you both for the three most common styles. ## How to Cite ChatGPT in APA (7th Edition) APA treats a large language model like software. The author is the company that made the model, not the model itself. So for ChatGPT the author is OpenAI, for Claude it is Anthropic, and for Gemini it is Google. The year is the year of the version you used, and you add a bracketed description that names it as a large language model. Reference list format: Company. (Year). Tool name (Version) [Large language model]. URL Example: OpenAI. (2026). ChatGPT (June 2026 version) [Large language model]. https://chatgpt.com In-text: (OpenAI, 2026) APA also recommends that you describe how you used the tool in the body of your paper, usually in the method section, and that you keep a record of the prompt you entered and the response you received. Because another reader cannot retrieve your exact conversation, APA suggests including the full prompt and output in an appendix if the response is central to your work. That way your use is transparent and reproducible in spirit, even if the output cannot be re-generated exactly. ## How to Cite AI in MLA (9th Edition) MLA takes a different approach. It does not list the AI tool as an author. Instead, you describe the prompt you used as the title of the source, name the tool as the container, and add the version, the company, the date, and the URL. MLA is clear that you should acknowledge AI in your text and never present its output as your own. Works Cited format: “Prompt text” prompt. Tool name, Version, Company, Date, URL. Example: “Explain the main causes of the 2008 financial crisis” prompt. ChatGPT, June 2026 version, OpenAI, 10 June 2026, https://chatgpt.com. In-text: (“Explain the main causes”) Because the prompt stands in for the title, your in-text citation uses a shortened version of that prompt in quotation marks. Keep the prompt in your reference short and descriptive so the reader can see exactly what you asked. ## How to Cite AI in Harvard Style Harvard is an author-date system, and the most widely used variant (Cite Them Right) handles AI much like APA. The company is the author, the year is the version year, you add the large language model description, and you include an access date because the output is not permanently retrievable. Reference list format: Company (Year) Tool name (Version) [Large language model]. Available at: URL (Accessed: Date). Example: OpenAI (2026) ChatGPT (June 2026 version) [Large language model]. Available at: https://chatgpt.com (Accessed: 10 June 2026). In-text: (OpenAI, 2026) Harvard is not one fixed standard. Your university may use its own variant with small differences in punctuation or the order of elements. Check your institution's Harvard guide and match it exactly. Our Harvard referencing guide walks through the wider system if you need a refresher. ## Chicago, Vancouver, and IEEE (In Brief) The three styles above cover most students, but if your field uses a different one, here is the short version. ## Chicago Chicago usually handles AI in a footnote rather than the bibliography, because the content is not publicly retrievable. A typical note reads: “Text generated by ChatGPT, OpenAI, 10 June 2026, https://chatgpt.com.” If your instructor wants a bibliography entry as well, follow their guidance. ## Vancouver and IEEE Both are numbered systems common in science and engineering. They treat AI output much like software or a personal communication, with a numbered reference that names the company, the tool, the version, and the URL. Because conventions here are still settling, confirm the exact format with your department before you submit. For a full side-by-side of how the six major styles handle sources in general, see our guide on how to cite sources in a research paper . ## Quick Reference: The Three Main Styles APA Author is the company. In-text: (OpenAI, 2026). Describe your use in the method and keep the prompt. MLA Prompt is the title, tool is the container, no author. In-text: a shortened prompt in quotation marks. Harvard Author is the company, include an access date. In-text: (OpenAI, 2026). Match your institution's variant. ## What an AI Citation Cannot Fix Here is the part that matters most, and the part that a citation format alone will never solve. Citing ChatGPT correctly does not make the AI a credible source of evidence. AI is a tool, not an authority. If you write “AI use is rising in higher education (OpenAI, 2026),” you have cited the tool properly and still supported a factual claim with something that cannot back it up. For any claim of fact, you need a real, verifiable source: a peer-reviewed article, a book, a dataset, an official report. AI can point you toward those sources, but it can also invent them. Language models are known to produce references that look perfect and do not exist, with plausible authors, titles, and journal names attached to nothing. Never paste an AI-generated reference list into your paper without checking that every single entry is real and says what the AI claims it says. This is exactly why universities are moving toward process-based evaluation : they care less about whether you touched AI and more about whether your work is grounded in real sources and real understanding. Verify your references against a database like Google Scholar , and if you are not sure where to look, our guide on how to find academic sources covers the ground. ## 5 Common Mistakes When Citing AI ## 1. Listing the AI as the author Neither APA nor MLA treats the model as the author. APA uses the company; MLA uses the prompt as the title with no author. Writing “ChatGPT (2026)” as an author is the most common slip. ## 2. Citing AI as evidence for a fact An AI citation shows where a piece of text came from. It does not give the claim authority. Back every factual statement with a real source, and use the AI citation only to acknowledge the tool. ## 3. Not saving the prompt and output Because the conversation cannot be retrieved later, you may be asked to show what you actually did. Save the prompt and the response as soon as you use them, and keep them with your working files. ## 4. Trusting AI-generated reference lists Fabricated references are the fastest way to lose a marker's trust. Open every source the AI suggests and confirm it exists, that the authors are right, and that it genuinely says what you are citing it for. ## 5. Skipping your institution's policy A perfect citation does not help if your department banned the tool or wanted a specific disclosure format. Read the policy first, then cite. If you need help wording it, our guide on what AI can and cannot do for a literature review covers responsible use in more depth. ## Sources You Can Actually Cite The safest way to use AI in research is to keep it pointed at sources you can verify. That is how Litrevu is built. You add the real papers you want to work from, ask what they say, and each claim in an answer cites the passage it came from, which you can open and read yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Citations come only from your papers, so you cite the paper, not the chatbot. You read every source, you write every word, and you declare how you used AI. Try it free, no credit card needed. Try Litrevu free ## Related Guides - How to Cite Sources in a Research Paper (6 Styles Compared) - APA Citation Format: The Complete Guide with Examples - Can AI Write a Literature Review? What You Need to Know (2026) - Litrevu for Research Papers --- # How to Synthesize Sources in a Literature Review (Step-by-Step, With Examples) URL: https://litrevu.com/blog/how-to-synthesize-sources-in-a-literature-review Category: Literature Review Published: 2026-07-18 Summary: Synthesis is the skill that separates a real literature review from a list of summaries. The difference explained, a synthesis matrix you can copy, a paragraph formula, and a worked before-and-after example. Literature Review ## How to Synthesize Sources in a Literature Review (Step-by-Step, With Examples) By Wasim Ghoor · 18 July 2026 · 13 min read · Updated 12 November 2026 To synthesize sources in a literature review, group your studies by idea rather than by paper, then say where they agree, where they disagree and what they leave unanswered. Each synthesis paragraph opens with your own claim about one theme and cites several studies as evidence for it, so the paragraph is led by the idea and not by any single author. ## What is synthesis in a literature review? Synthesis in a literature review is the work of combining what several sources say about one idea into a single argument about the state of research on that idea. Purdue’s Online Writing Lab puts it this way: “When you look for areas where your sources agree or disagree and try to draw broader conclusions about your topic based on what your sources say, you are engaging in synthesis” ( Purdue OWL, Synthesizing Sources ). The same guide suggests you “begin by grouping your sources by topic and looking for connections”, which is why a synthesized review is organized by idea rather than by author. The University of Illinois Springfield Learning Hub describes the same move as “integrating support from more than one source for one idea/argument” ( UIS Learning Hub, Synthesizing Research ). Think of a literature review as a panel discussion rather than a row of interviews: a synthesized review puts the studies in the same room and reports what the discussion concluded. ## What is the difference between summary and synthesis? A summary reports what one source says; synthesis reports what several sources, taken together, show about one idea. The unit of a summary is the source, and the unit of synthesis is the idea. Purdue OWL draws the line in two sentences: “A summary restates the information in one or more sources without providing new insight or reaching new conclusions. A synthesis draws on multiple sources to reach a broader conclusion.” UC Merced Library’s literature review guide puts the rule plainly: a literature review is “not a list summarizing one piece of literature after another” ( UC Merced Library, Literature Review, Step 7 ). The table below shows the same three studies written both ways. The studies are placeholders (Source A, Source B, Source C), used as a format illustration only; they are not real papers and the findings are not real results. Summary versus synthesis of the same three placeholder sources (format illustration, not real studies) Aspect Summary (source by source) Synthesis (idea first) Unit of writing One source per sentence or paragraph One idea per paragraph, several sources per idea Opening sentence Names an author: “Source A found that remote learning lowered exam scores.” States a claim: “The effect of remote learning on exam scores appears to depend on who is being taught.” How sources appear “Source B found no effect. Source C found higher scores for older students.” “Studies of traditional undergraduates report a decline (Source A) or no change (Source B), while work with older learners reports an improvement (Source C).” Disagreement Left for the reader to notice Named and explained: learner age, rather than the medium, may drive the difference Ending Stops after the last source Names the gap: no study in the set tests learner age directly The synthesis column cites the same three sources, yet the claim leads and the sources serve it. ## How do you synthesize sources, step by step? You synthesize sources in five steps: read each paper for its position in the debate, build a synthesis matrix, read the matrix by theme, write one paragraph per theme with a four-move formula, then check every claim against the papers. The Stanford Program in Writing and Rhetoric’s synthesis matrix activity has students “relate different sources to each other according to themes, topics, keywords, or codes”, which is the core of steps 2 and 3 ( Stanford PWR, Synthesis Matrix ). The five steps of synthesizing sources in a literature review Step What you do What you end up with 1. Read for position For each paper, note the finding, the method, the population and which earlier studies the paper extends or disputes Notes that show where each paper sits in the debate 2. Build a synthesis matrix Put sources in rows and themes in columns; fill each cell with what that source says on that theme One table holding your whole reading 3. Read down the columns Read one theme column top to bottom; mark agreement, disagreement and empty cells A list of themes, each with its evidence and its gaps 4. Write one paragraph per theme Use the four moves: claim, grouped evidence, tension, gap Paragraphs led by ideas, not authors 5. Check against the papers Reopen each cited passage and confirm the paper says what your sentence says A review you can defend line by line Step 1 is the easiest step to skip and the costliest to lose. Almost every study positions itself against earlier work, and recording that position while reading is what makes the grouping in step 3 possible. The Asia-Pacific Nazarene Theological Seminary thesis handbook describes the goal as a review that represents “a ‘conversation’ between the researcher and the literature sources” ( APNTS 2019 Thesis Handbook ). ## What is a synthesis matrix? A synthesis matrix is a table with your sources as rows and your themes as columns, where each cell records what one source says about one theme. Reading a synthesis matrix down a column, rather than across a row, gathers everything your sources say about one theme, which is the raw material for one synthesized paragraph. A coach at the UNC Writing and Learning Center describes using a synthesis matrix “for taking research notes and seeing relationships across large numbers of sources and information categories” ( UNC Writing and Learning Center, How I Made My Life Easier By Using A Synthesis Matrix ). Stanford’s version adds a “method” column next to the topics, which the activity says “could include academic discipline and methods for conducting research” ( Stanford PWR ). A method column earns its place because differing methods are one of the usual explanations when studies disagree. Here is a blank synthesis matrix in that shape, with placeholder sources: A synthesis matrix template: sources in rows, themes in columns (placeholder sources) Source Theme 1: effect on outcome Theme 2: population studied Theme 3: conditions for the effect Method Limitation the authors note (Author, Year) (Author, Year) (Author, Year) An empty stretch in a synthesis matrix column means none of the sources in your matrix address that theme. An empty column is a lead to search further, not proof of a gap in the wider literature, because your matrix holds only the papers you have read. If your notes are not set up yet, the guide on how to organize research sources covers the source list a synthesis matrix is built from. ## How do you write a synthesis paragraph? A synthesis paragraph follows four moves: state a claim about the theme, group the evidence that supports the claim, show where the sources disagree and why, and close by naming what remains unknown. The UIS Learning Hub describes a synthesized paragraph as one that blends assertions, evidence and commentary into “a cohesive paragraph” ( UIS Learning Hub ). The four-move synthesis paragraph formula, with example sentences (format illustration, placeholder sources) Move What the move does Example sentence 1. Claim States what the literature shows on this theme, in your words, naming no single source “Peer feedback appears to improve student writing, but the size of the effect depends on how it is measured and how it is set up.” 2. Grouped evidence Cites the supporting sources together, in one sentence where possible “Controlled studies report gains in overall writing quality (Source A) and, where students are first trained to give feedback, in argument as well (Source C).” 3. Tension Names a disagreement and offers a reason for the difference “Weaker results come from a study that assessed only grammar (Source B), which suggests the benefit lies in higher-order revision rather than proofreading.” 4. Gap Says what is still untested; this sets up the next theme or your research question “Whether these gains hold beyond the first year is unclear, since the trials in this set focus on new undergraduates.” Put the four example sentences together and you have one synthesis paragraph in which every placeholder source is cited, yet the claim leads. For wording that links sources, the University of Manchester’s Academic Phrasebank lists phrases such as “There are a number of similarities between X and Y” and “In contrast to earlier findings, however, no evidence of X was detected” ( Academic Phrasebank, Comparing and contrasting ). ## How do you synthesize studies that disagree? To synthesize studies that disagree, report the disagreement openly and then explain it by comparing what the studies did differently: who they studied, what they measured and how. The Cochrane Handbook (version 6.5.1, section 10.10.1) separates “clinical diversity” (variability in participants, interventions and outcomes) from “methodological diversity” (variability in study design, outcome measurement tools and risk of bias) ( Cochrane Handbook, Chapter 10 ). Those two categories give a literature review a ready checklist for explaining conflicting results. Ask three questions of any two studies that disagree. Did the two studies sample different people? Did the two studies measure the outcome differently? Did the two studies use designs of different strength? If one answer is yes, that difference is the “tension” move of your synthesis paragraph. If every answer is no, say the conflict is unresolved; an unexplained conflict is itself a finding. The APNTS thesis handbook asks writers to “note differences in the literature by comparing and contrasting the studies” ( APNTS 2019 Thesis Handbook ). The full method is in the guide to conflicting findings in a literature review . ## What are common synthesis mistakes? The most common synthesis mistake is writing one paragraph per source, which turns a literature review into the “list summarizing one piece of literature after another” that UC Merced Library warns against ( UC Merced Library ). The other frequent synthesis mistakes are listed below with a fix for each. Common synthesis mistakes in a literature review and how to fix each Mistake How to spot the mistake Fix One paragraph per source Each paragraph opens with a new author’s name Rebuild the section around themes from the synthesis matrix Citation dumping Several citations at the end of a sentence with no word on how they relate Say whether the cited studies agree, and on what Reporting only agreement No paragraph mentions a conflicting result Add the tension move and explain the difference Author-name headings Section headings are author names or “Study 1, Study 2” Use thematic headings, as UC Merced’s guide advises: “Organize the literature review into sections that present themes or identify trends” ( UC Merced Library ) No voice of your own A reader cannot tell what the literature adds up to Open each paragraph with your claim about the theme The structural version of the author-heading fix is in the guide to structuring a literature review by theme , and a wider list of pitfalls is in 10 common literature review mistakes . ## How do you synthesize sources with an AI assistant for writing backed by sources? With an AI assistant for writing backed by sources, you add your own papers, line them up by theme in a cited comparison table, and check your synthesis paragraph against them; you still decide what the papers add up to and write the paragraph yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The Litrevu workflow for synthesis, following the steps on How Litrevu works , runs like this: - Add your papers. Upload the PDFs you have read, or paste a PDF link, a DOI or an arXiv link, or a paper’s text. Litrevu can also find open-access papers on your topic for you to choose from. - Ask your papers about one theme. Ask a question such as “What do these papers find about the effect on first-year students?” Litrevu answers with citations only from your papers, and says so when your papers do not cover the question. - Compare the papers side by side. Line the studies up in a table with citations to see where they agree and where they differ. That table plays the role of one column of your synthesis matrix. - Open each citation. Every citation opens to its passage highlighted on the page of the PDF, so you can confirm a finding before you use it in a claim. - Check your paragraph. Paste the synthesis paragraph you wrote. Each claim comes back Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover that claim. “Not in your papers” is not proof that a gap exists in the wider literature; search further before you write a gap sentence. The claim, the grouping and the judgement about which findings are convincing remain yours, because that judgement is what a literature review is assessed on. ## How does Litrevu compare with Elicit, Consensus, Scite and Research Rabbit? Litrevu, Elicit, Consensus, Scite and Research Rabbit solve different parts of the review. Elicit, Consensus and Research Rabbit help you find and assess papers across the published literature; Scite shows how later work cites a paper; Litrevu works from the papers you have already chosen, comparing them and checking your writing against them. Every competitor claim below comes from that vendor’s own pages. Litrevu, Elicit, Consensus, Scite and Research Rabbit compared for literature review synthesis (vendor pages read November 2026) Tool Best for Works from Where the tool beats Litrevu Litrevu Comparing and checking the papers you have already chosen PDFs, PDF links, DOI or arXiv links and pasted text you add, plus open-access papers you pick Not applicable Elicit Finding papers, systematic review screening and structured data extraction A discovery corpus of 138M+ papers, plus PDFs you upload A far larger discovery corpus, systematic review screening into the thousands, and purpose-built data extraction; its output is reports, tables and structured comparisons Consensus Answering an empirical yes or no question across the literature An academic search engine over 200M+ peer-reviewed papers The Consensus Meter shows the proportion of studies supporting or contradicting a yes or no claim, in seconds; nothing in Litrevu does this Scite Seeing whether later work supports or contrasts a paper 1.6B+ citation statements, each classified as supporting, contrasting or mentioning Shows whether a source has been supported or challenged since; Litrevu has no view on that Research Rabbit Visual citation-graph discovery A citation graph: start from one paper and expand through related works, authors and topics Visual maps of how a field connects; Litrevu offers nothing comparable If you do not have your papers yet, Elicit, Consensus and Research Rabbit will help you gather them, and Litrevu’s own search covers only open-access papers. Elicit also works from uploaded documents, so the difference there is the shape of the output: Elicit produces reports and tables, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Litrevu can also draft text, which belongs lower in the process: many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution’s policy and declare how you used any AI tool. The AI disclosure statement generator gives you wording for that declaration. ## What else do students ask about synthesizing sources? ## What is an example of synthesis in a literature review? An example of synthesis is a paragraph that opens with a claim such as "the effect of peer feedback depends on how the effect is measured", then cites two studies reporting gains and one reporting weak effects, and explains the difference by what each study measured. The paragraph is led by the claim, not by any single study, and the paragraph ends by naming what the studies have not yet tested, such as whether the gains last beyond the first year. ## How many sources should one synthesis paragraph cite? None of the university writing guides read for this article (Purdue OWL, UC Merced, Stanford, UNC and the University of Illinois Springfield) sets a fixed number of sources per synthesis paragraph. The University of Illinois Springfield defines synthesis as "integrating support from more than one source for one idea/argument", so a synthesis paragraph needs at least two sources. In practice the number depends on how many of your sources address that theme. ## Can you synthesize with only three sources? Yes, you can synthesize with three sources, because synthesis needs only two or more sources speaking to the same idea. Stanford's synthesis matrix activity starts students with two to four sources they have already read. With three sources, the synthesis paragraph usually groups two that agree and explains the third. ## What is synthesis in an RRL? In the Philippines, the literature review chapter of a thesis or dissertation is often called the RRL, or review of related literature. Synthesis in an RRL means the same as anywhere else: grouping related literature and related studies by topic and comparing them, rather than summarizing each one. The Asia-Pacific Nazarene Theological Seminary thesis handbook, for example, places the "Review of the Related Literature, Studies, and Works" in Chapter 2 and says the literature review "is not a summary of what other researchers have written and done." ## Is a synthesis matrix the same as a literature review matrix? A synthesis matrix and a literature review matrix are close relatives, but they are organized differently. A literature review matrix usually has one row per study and one column per question you ask of every study (aim, method, findings, limitations), while a synthesis matrix uses your themes as columns so that each column becomes a paragraph. You can start with Litrevu's free literature review matrix, linked below this article, and add theme columns to turn it into a synthesis matrix. ## Is synthesis the same in a thesis and a dissertation? Synthesis works the same way in a thesis and a dissertation: group sources by idea, compare them and name the gap. What changes is scale, with more sources and more themes at doctoral level. In the US, a master's project is usually called a "thesis" and "dissertation" usually means a PhD; other countries use the two words differently, so check your department's handbook for the term and the expected length of the literature review chapter. ## What should you do next with your sources? Pick one theme from your reading, put the studies on that theme into a synthesis matrix column, and write one four-move paragraph about it. If you want to line those papers up by theme and check which of your claims they support, add them to Litrevu. Free to start, no credit card required. Try Litrevu free ## Related Guides - How to Write a Literature Review: 5 Steps + Examples - What to Do When Two Studies Contradict Each Other in Your Literature Review (2026) - How to Structure a Literature Review by Theme (With Examples) - 10 Common Literature Review Mistakes (And How to Avoid Them) --- # How to Spot Fake AI Citations Before You Submit (2026 Guide) URL: https://litrevu.com/blog/how-to-spot-fake-ai-citations-before-you-submit Category: AI & Research Writing Published: 2026-07-09 Summary: Fake AI-generated citations are rising fast. Learn the five-minute checks that catch hallucinated references before your marker does, with real 2026 examples. AI & Research Writing ## How to Spot Fake AI Citations Before You Submit (2026 Guide) By Samuel de Bruyn · 9 July 2026 · 9 min read Somewhere in a reference list being submitted this week, there is a paper that does not exist. The authors are real, the journal is real, the title sounds right, and the whole thing was invented by an AI tool seconds before it was pasted in. Checking a citation takes about a minute once you know what to look for, and this guide walks you through exactly that. ## Check your references Any style. Up to 30 references at a time. Your list is not saved or used for training. Reference list Check references Try an example How the checker works Writing from these sources? Give Litrevu your topic and it finds open-access papers on it, or upload the papers you have, and ask what they say. It only cites papers in your library, and every citation opens the passage it came from. What's your research topic? Find papers on it Free to start. No card needed. ## What a Hallucinated Citation Actually Is When people hear “fake citation” they usually picture something obviously wrong, a made-up journal called the International Review of Whatever with an author named John Smith. That is not what these look like. A hallucinated citation is usually a Frankenstein reference: a real researcher’s name, attached to a plausible title they never wrote, in a journal that genuinely exists, with a volume number and page range that fit the journal’s format perfectly. That is because tools like ChatGPT do not look anything up when they generate a reference. They predict what a citation in your topic area would probably look like, word by word, based on patterns in their training data. The result is a reference that is statistically plausible and factually empty. My favourite example from this year: Guillaume Cabanac, a computer scientist at the University of Toulouse who studies fabricated papers, discovered a dental journal article citing his own work. His research has nothing to do with dentistry. The citing paper’s authors, or their AI tool, had simply grabbed a real name and stitched it onto a claim it never supported. An education lecturer had the mirror-image experience. She emailed researchers asking for a copy of a 2023 paper on instructional presence in eLearning that she’d seen cited. Nobody could send it to her, because the paper was never written. It only existed inside a reference list. If experienced academics are being fooled, a second-year student skimming their reference list at 2am has no chance. Which is exactly why you should not rely on skimming. ## Why This Got Serious in 2026 For a while, hallucinated references were a curiosity. Not anymore. A study reported in May 2026 tracked fabricated references in published research and found the rate had jumped roughly sixfold in two years, from about 1 in 2,828 papers in 2023 to 1 in 458 in 2025. In the first weeks of 2026 it hit 1 in 277. When researchers sampled 300 submissions to a major AI conference this year, a fifth contained at least one hallucination that peer reviewers had not caught. Universities have noticed. The broad policy shift in 2026 is that most institutions no longer treat AI use itself as the crime; undisclosed or unverified AI use is. We covered the collapse of AI detection tools in AI Detection Is Dead. Universities Are Switching to Process-Based Evaluation , and one consequence of that shift matters enormously here: markers who can no longer trust a detector are checking the things they can verify. A reference list is the easiest thing in your assignment to verify. One fake citation is concrete, provable evidence that something went wrong in your process, and unlike a detector score, you cannot argue with it. I’ll be honest, I think this is fair. A fabricated reference in your work is a false statement of fact with your name signed under it, however it got there. “The AI did it” has not worked as a defence for the lawyers who tried it, and it will not work for you. ## The Five Minute Check That Catches Most Fakes Here is the process I’d use on any reference you did not personally pull from a database. It works through the checks from fastest to slowest, and most fakes die at step one or two. - Look up the DOI. Most modern journal articles have a DOI, a digital object identifier that looks like 10.1000/xyz123. Paste it into doi.org. If it resolves to a paper with the same title and authors, the source exists. If it resolves to a completely different paper, or nothing, you have a problem. AI tools frequently generate DOIs that are formatted correctly but point nowhere, because the format is easy to predict and the registry is not. - Search the exact title in Google Scholar. Put the title in quotation marks. A real paper almost always appears as the first result. If Scholar returns nothing, or only papers with vaguely similar titles, be suspicious. Genuine articles from the last twenty years are extremely well indexed. - Check the journal’s own archive. Go to the journal’s website and look up the volume and issue in the citation. Real citation, real table of contents, the paper will be there. This catches the Frankenstein cases where a real paper’s details have been subtly mangled. - Check the author. Most active researchers have a Google Scholar profile, an ORCID page, or a university staff page listing their publications. If the citation claims a 2022 paper by a specific person and their own publication list doesn’t mention it, that tells you something. - Open the actual paper and read the abstract. This is the step people skip, and it catches the subtlest failure: the citation is real but does not say what your text claims it says. AI tools do this constantly, attaching genuine sources to claims those sources never made. A marker who follows up one citation and finds it irrelevant will start following up all of them. For a typical assignment with 15 to 25 references, the full sweep takes under half an hour. Compare that with the cost of a misconduct hearing and it’s the cheapest insurance you will ever buy. If you want to go deeper on evaluating whether a source is worth citing in the first place, we’ve written a full guide on how to find academic sources . ## The Tells That Give a Fake Away Even before you verify anything, some patterns should raise your eyebrows. Titles that fit your essay question a little too perfectly are the classic tell. Real research is oddly specific; it studies 43 nurses in two hospitals in Ontario, not “The Impact of Social Media on Adolescent Mental Health: A Comprehensive Review” that happens to match your assignment title almost word for word. When a reference reads like it was commissioned for your exact argument, that is often because, in a sense, it was. Watch for strange co-author combinations too. Hallucinated references love pairing two famous names from the same field who have never actually published together. Page ranges that are suspiciously tidy (100 to 115, 200 to 220), years that don’t match the journal’s actual publication history, and prolific authors cited with their name slightly misspelled are all common artefacts. And a formatting note: hallucinated references are frequently in flawless APA while the surrounding student-gathered references are a bit messy. Ironically, the perfect ones are the suspects. Consistent, correct formatting matters, and our APA citation format guide covers it, but formatting polish tells you nothing about whether the source exists. None of these tells is proof on its own. They just tell you where to point the five minute check first. ## What to Do When a Reference Will Not Verify Delete it. Not eventually, immediately. A citation you cannot verify is a citation you cannot defend, and no paragraph is so good that it is worth defending in front of an integrity committee. Then fix the hole it leaves. Usually the claim you were supporting is real and findable in the actual literature, so search Google Scholar for the claim itself and cite the genuine paper you find, after reading it. If you cannot find any real source for the claim, treat that as information: the claim may simply be wrong, and your argument is stronger without it. Keeping track of what you have actually read and verified is much easier with a simple system, which is exactly what our guide to organising research sources is for. If the unverifiable reference came out of an AI tool, take it as a signal about your process rather than a one-off glitch. Whatever produced one fabricated reference has probably produced others, so check everything from the same session, and have a look at how to cite sources properly so the rebuilt list is done right. ## Where AI Fits, If It Fits at All I am not going to tell you AI has no place in research writing. That ship has sailed, and pretending otherwise just drives the use underground where nobody verifies anything. But there is a hard line between tools that generate citations and tools that work from sources you have already gathered, and the whole fake-citation problem lives on one side of it. A general chatbot asked to “write a literature review with references” will invent sources, because inventing plausible text is what it does. A grounded tool that only works from papers you uploaded cannot cite a paper that does not exist, though you still have to check that every citation says what the draft claims it says. That difference is the entire game. It is why Litrevu cites only the papers a student has gathered themselves, and it is why we wrote honestly about the limits of these tools in Can AI Write a Literature Review? Whatever tool you use, the rule does not change: you read every line, you check every citation against its source, and you own every word you submit. The students who get into trouble are almost never the ones who used AI. They are the ones who did not check. ## How Litrevu Compares to Other Research Tools These tools mostly solve different problems. Three of the four below help you find and evaluate papers. Litrevu starts after that, when you have the papers and need to understand them: it answers questions about your papers, compares them and checks your own writing against them. Elicit is the one with real overlap. Comparison of Litrevu, Elicit, Consensus, Scite and Research Rabbit by what each is best for, what it works from, what it outputs, and where each beats Litrevu. Tool Best for Works from What you get Where it beats Litrevu Litrevu Understanding, comparing and checking the papers you have already chosen PDFs you add, plus open-access papers you pick from an OpenAlex search Answers that cite the passage they came from, side-by-side comparison tables, and a check of your own writing against your papers Only a basic open-access search, no screening at scale, no view on whether a source is contested Elicit Finding papers and extracting structured data from them 138M paper corpus, and PDFs you upload Reports, tables, summaries and structured comparisons Far larger discovery corpus, systematic review screening into the thousands, purpose-built data extraction tables Consensus Answering an empirical yes or no question across the literature 200M+ peer-reviewed papers Synthesised answer with a meter showing how much of the literature agrees Answers questions across all published work in seconds; nothing in Litrevu does this Scite Checking whether a paper has been supported or contradicted since 1.6B+ classified citation statements Citation contexts labelled supporting, contrasting or mentioning Tells you if a source is contested. Litrevu has no view on this at all Research Rabbit Exploring outward from one paper to find related work Citation graph Visual networks of related papers, authors and topics Visual citation-graph discovery; Litrevu offers nothing comparable The honest split: if you do not yet have your papers, Elicit, Consensus and Research Rabbit will get you there faster than Litrevu can. Litrevu's only discovery is an open-access search (OpenAlex) when you add sources, where you pick which papers to add; it cites only the papers in your library and does not search the web for citations. If you want to know whether a study you already cite has since been contradicted, Scite answers that and Litrevu does not. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Elicit also works from uploaded PDFs, so the real difference there is the shape of the work: Elicit produces reports, tables and structured comparisons, with a purpose-built extraction workflow, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Its comparison tables are built in chat for a handful of papers and are not an extraction workflow. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Comparison verified as of August 2026 against each vendor's own documentation. These products change quickly, so check the current feature list before deciding. ## Ask Your Own Papers If you have already done the honest part, gathering real papers on your topic, Litrevu can help with the slow part: reading them closely. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Upload the papers you have collected and ask what they say. Litrevu cites only those papers, and every citation opens to the passage it came from, so you can read it and verify it yourself. Once you have written a paragraph, paste it in to see which of your claims your sources back. Litrevu is free to start, no credit card required. Try Litrevu free ## Related Guides - Can AI Write a Literature Review? What You Need to Know (2026) - AI Detection Is Dead. Universities Are Switching to Process-Based Evaluation. - How to Find Academic Sources for Your Research Paper (2026 Guide) - How to Cite Sources in a Research Paper (6 Styles Compared) --- # How to Write an AI Declaration Statement (With Examples) URL: https://litrevu.com/blog/how-to-write-an-ai-use-disclosure-statement Category: AI & Research Writing Published: 2026-07-08 Summary: An AI declaration statement names the AI tool, what you used it for and how you checked the output. See what to include, where it goes and examples. AI & Research Writing ## How to Write an AI Declaration Statement (With Examples) By Samuel de Bruyn · 8 July 2026 · 13 min read · Updated 4 November 2026 An AI declaration statement is a short note in your assignment that names each AI tool you used, says what you used it for and where in the work, and says how you checked or changed what it produced. If your university publishes its own declaration form, such as UKZN’s Appendix A or the University of Pretoria’s declaration form, use that form exactly; otherwise write the five elements every declaration needs: the tool, the task, where you used it, how you checked the output, and your prompts. AI declaration statement: a signed or written note, submitted with an assignment, thesis or dissertation, that records which generative AI tools a student used, for what tasks, in which parts of the work, and how the student checked the output. Universities also call it an AI disclosure statement, an AI acknowledgement or a declaration of AI use. ## What is an AI declaration (disclosure) statement? An AI declaration statement is your account of how you used AI, not AI-generated text pasted in. It tells the marker which tool you used, what you used it for, where in the work it played a part, and how you checked what it produced. “AI declaration”, “AI disclosure statement” and “AI acknowledgement” name the same thing; the word your university uses is the one to put in your heading. An AI declaration is not permission after the fact. If an assessment brief says no AI for a task, declaring AI use for that task does not make the use allowed. The University of Cambridge’s School of the Humanities and Social Sciences puts the other side plainly: using any unacknowledged AI-generated content in a summative assessment “as though it is their own work constitutes academic misconduct”, unless the assessment brief explicitly states otherwise ( Cambridge HSS, 11 September 2025 ). An AI declaration also differs from an AI reference. A declaration describes your process; a reference entry cites the AI tool as a source in APA, Harvard or MLA. Some universities want both, and some want only the declaration: UKZN tells students not to cite AI tools as sources but to cite the original sources the AI drew from (clause 6.8.7). ## What should an AI declaration include? An AI declaration should include five things: the tool and who makes it, what you used it for, where in your work you used it, how you checked or changed the output, and your prompts or a note that you can show them. Cambridge’s sample declaration asks five questions that map onto these elements, and the University of Queensland’s minimum is “what tools you used and what you used them for” ( UQ Library ). Element What to write Format example Universities that ask for it The tool The tool’s name, the company behind it, and the model or version if the tool shows one ChatGPT (OpenAI), model [name] Cambridge HSS, NWU, Monash What you used it for The task: brainstorming, explaining a concept, language editing, translating, summarising, coding “to explain [concept] in simpler terms” UKZN, Wits, Pretoria, Stellenbosch, NWU, Monash, UQ Where in your work The sections or parts the tool touched, and the parts it did not “Section 2 only” NWU, Pretoria, Monash How you checked or changed the output What you kept, changed, fact-checked against the original sources, or left out “I checked each point against the cited papers” Cambridge HSS, UKZN, NWU, Monash Your prompts The prompts themselves, a share link to the chat, or a note that the record is available “Prompts in Appendix A” Pretoria, Cambridge HSS, NWU (optional link) Sources for each row: UKZN guidelines SE/01/0312/24 , Wits Faculty of Science guidelines , University of Pretoria guide, Appendix B , Stellenbosch internal declaration , NWU declaration , Monash and Cambridge HSS . To fill in your own university’s wording, use the free AI declaration statement generator linked at the end of this guide. Pick your university and what you used AI for, and it gives you that university’s format, a reference for the tool in APA, Harvard or MLA, and the records to keep. ## Where does an AI declaration go in an assignment? An AI declaration goes wherever your university or assessment brief says, and the placement differs more than students expect. UKZN requires its declaration “in the front section of the assignment, dissertation, or thesis” (clause 6.9.4), the Wits Faculty of Science wants it in the front matter of a postgraduate thesis at first submission, King’s College London appends it with your references, and the University of Pretoria uses a separate form submitted with each assignment. If your brief is silent, three placements are common: a short note under the title or in a footnote for light use, an acknowledgements or declarations section, or an appendix when you are attaching prompts or a longer explanation. Monash’s example puts the declaration in its own section of the assessment, labelled “Part B: Concise summary of AI use in the assessment” ( Monash ). When the brief and the university page disagree, the brief wins, because the brief is set for that assessment. ## How do you cite AI in APA 7? APA 7 cites an AI tool with the company as author: AI Company Name. (year). Tool Name/Model [Description]. URL. APA’s own example is “Google. (2025). Gemini 2.5 Flash [Large language model].” The year is the year the tool was most recently updated, not the year you used it ( APA Style blog, 9 September 2025 ). APA changed three things in that September 2025 update: - Version numbers are no longer added by default. Give the model name when the tool shows one; APA notes that ChatGPT no longer specifies version numbers. - A specific chat has its own format. Cite it as AI Company Name. (year, month day). Title of chat [Generative AI chat]. Tool Name/Model. URL of the chat. APA’s example: “Google. (2025, May 22). High school grammar concepts overview [Generative AI chat]. Gemini 2.5 Flash.” - Prompts never go in the reference. APA says prompts “can be described in the text, but they are not included in the reference”, for example in the method section or an appendix. An APA reference does not replace the AI declaration. The reference cites the tool as a source; the declaration explains what you did with it. UKZN goes further and tells students not to cite AI tools as sources at all, but to “cite the original sources that the AI might have drawn from” (clause 6.8.7). For MLA and Harvard formats, see how to cite ChatGPT and AI sources and the APA citation format guide . ## What does an AI declaration example look like? An AI declaration example names the tool, the task, the parts of the work affected and how the student checked the output, in two to four sentences. The three templates below follow that pattern for the three most common uses. They are format templates: replace every bracket with what you did, and never describe a smaller use than the real one. ## Language editing only Declaration of AI use: I used [tool] ([company], [link]) on [date] to suggest corrections to grammar and sentence clarity in [sections]. I accepted or rejected each suggestion myself, and the ideas, analysis and sources are my own. ## Brainstorming and outlining Declaration of AI use: I used [tool] ([company], [link]) on [date] to brainstorm search terms and a possible outline for this assignment. I chose the final structure myself, found and read every source, and the argument is my own. My prompts and the outputs are in Appendix A. ## Summarising papers you had already read Declaration of AI use: I used [tool] ([company], [link]) on [date] to produce first-pass summaries of [number] articles I had read in full. I checked each summary against the original article and corrected it where it was wrong. The synthesis, conclusions and writing are my own. Prompts and outputs are in Appendix A. The last clause in each template carries the weight. A marker reading “I checked each summary against the original article” knows you were in control of the process, which is exactly what a declaration is for. The clause only protects you if it is true, so do the checking before you write it. ## What do universities ask for in an AI declaration? Universities ask for different AI declaration formats, from a one-sentence acknowledgement to a nine-section signed form, and several South African universities require a declaration even when no AI was used. The table below covers seven universities, each taken from that university’s own page or document, as of November 2026. If your assessment brief gives different wording, use the brief. University (country) Format What it asks for Where it goes UKZN AI declaration ( South Africa ) AI Declaration, Appendix A of the guidelines (effective 1 January 2025) Option a) did not use AI, or b) the areas used (from hypothesis generation to language editing), with a statement that output was “fully interrogated for applicability, accuracy of content, and plagiarism”, and c) AI in the methodology; name and student number Front section of all student work (clause 6.9.4) University of Pretoria AI declaration ( South Africa ) Generative AI declaration form, Appendix B of the guide for lecturers (version 9) Student details, a yes or no, the tool and prompts, the type of use, an ethical-use statement and why AI was used; signed Submitted with every assignment, “regardless of whether any AI tools were used” (section 3.9.1) Wits AI declaration ( South Africa ) Faculty of Science postgraduate declaration, Appendix B Did or did not use AI, then ten categories to tick, from idea generation and sourcing related work to editing, writing and citation formatting; signed Front matter of the thesis, dissertation or research report, at first submission Stellenbosch AI declaration ( South Africa ) Internal Student Declaration for the Use of AI Tools (postgraduate) No use beyond basic spelling or grammar help, or ten purposes to tick, plus a table of tool, purpose, and extent and justification An internal record discussed with your supervisor NWU ( South Africa ) AI Use and Plagiarism Declaration Part 1 if no AI tools were used; Part 2 if they were, in nine sections from tool name and version to extent of contribution, prompts and signature A signed declaration; your module instructions set how you submit it Monash AI acknowledgement ( Australia ) Suggested acknowledgement format “I used [AI tool] to [how used] and [number of iterations/drafts]”, plus how you modified the output A set section of the assessment (Monash’s example calls it Part B); your Chief Examiner sets the exact approach UQ ( Australia ) AI acknowledgement coversheet (UQ Library) What tools you used and what you used them for, as a statement, coversheet, form or table As your course profile directs; use your course coordinator’s template if one is given Sources: UKZN SE/01/0312/24 , University of Pretoria AI T&L Guide , Wits Faculty of Science , Stellenbosch , NWU , Monash , UQ Library . Wits’s declaration states the stakes in its first line: using generative AI tools “without explicitly declaring such use constitutes a form of plagiarism and is classified by Wits University as academic misconduct.” For the full rules on what each stage of a thesis allows, see can I use AI for my dissertation? ## What are the most common AI declaration mistakes? The most common AI declaration mistake is being vague: “AI was used in this assignment” tells the marker nothing, so the marker has to imagine the rest. Four other mistakes cause trouble: - Under-declaring. Describing heavy use as light use reads as hiding something once it comes out. NWU’s form asks you to estimate the extent of the AI’s contribution as minimal, moderate or substantial, so pick the honest one. - Declaring a use the brief forbids, as if the declaration fixes it. A declaration records permitted use. Check the brief first. - Leaving out the records. UKZN’s clause 6.9.2 lets supervisors and module coordinators require “records of their substantial interactions with generative AI tools, such as the prompts provided and the AI-generated outputs”, and Monash advises keeping prompts, outputs, drafts and screenshots. Save them as you work, not after the deadline. - Declaring checks you did not do. A sentence saying you checked every source only protects you if you did, which is why spotting fake AI citations before you submit belongs before the declaration, not after. Keeping drafts and records also helps if anyone later asks whether the work is yours; how to prove you wrote your own work covers building that paper trail. ## Does declaring AI use protect you? Declaring permitted AI use protects you, because undeclared use is what universities treat as misconduct. King’s College London’s declaration says that as long as the use “falls within the scope of appropriate use as defined in the assessment brief/guidance then this declaration will not have any direct impact on the grades awarded” ( King’s College London student guidance ). Students still skip it. In research at King’s Business School, “up to 74% of students did not comply” with the requirement to declare AI use, and one student likened declaring to “admitting to plagiarism” ( Chahna Gonsalves, SRHE blog, 25 October 2024 ). The fear is understandable and backwards: a declaration is the record that your use was within the rules. For the wider question of where the line sits, see the ethics of AI in research writing . ## How do you declare an AI assistant for writing backed by sources? You declare an AI assistant for writing backed by sources the same way as any other AI tool: name the tool, say which tasks you used it for, and say how you checked what it gave you. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Litrevu’s tasks match categories that university forms already list, such as “Sourcing Related Work (summarising, identifying sources)” on the Wits Faculty of Science form or “Literature Search” on the Stellenbosch form, so the declaration names those tasks. In practice the workflow on your own papers looks like this: - Add the papers you already gathered: upload PDFs, paste a PDF, DOI or arXiv link, or pick open-access papers Litrevu finds on your topic. - Ask the papers questions. Answers cite only your papers, and Litrevu says when your papers do not cover a question. - Open each citation to the highlighted passage on the PDF page and read it yourself. - Compare papers side by side in a cited table to see where they agree and differ. - Paste a paragraph you wrote and get each claim back as Supported, Partly supported, Contradicted or Not in your papers. A declaration for that use could read: “I used Litrevu (litrevu.com) on [dates] to ask questions of [number] papers I had added, to compare their findings in a table, and to check claims in my own draft against those papers. I opened and read each cited passage, and the analysis and writing are my own.” Adjust it to your university’s form, and if the form has a category list, tick the categories that match what you did. If you are at the proposal stage, how to use AI for a research proposal walks through AI use section by section. ## AI declaration FAQ ## What is the difference between an AI declaration and an AI acknowledgement? An AI declaration and an AI acknowledgement are the same thing under different names. Monash and UQ call it an acknowledgement, while UKZN, Wits, Pretoria, Stellenbosch and NWU call it a declaration. Use the word your university uses as your heading. ## Do I have to declare Grammarly? Whether you have to declare Grammarly depends on your university. NWU’s declaration lists Grammarly, QuillBot and AI translation tools as AI tools, so using them means completing Part 2. King’s College London says grammar and spell checking is consistent with its “no AI” statement, so check your own university’s policy. ## Do I need to declare AI if I only used it for ideas? You usually need to declare AI used only for ideas or brainstorming. UKZN’s declaration lists “to generate ideas”, the Wits Faculty of Science form lists “Idea Generation”, and Monash lists generating ideas or structure suggestions as a use to declare. Brainstorming may be allowed, but allowed is not the same as undeclared. ## Do I need an AI declaration if I did not use AI? At some universities you need an AI declaration even if you did not use AI. UKZN’s Appendix A applies to all student work and starts with “I did not use generative AI”, and the University of Pretoria requires its form with every assignment “regardless of whether any AI tools were used”. NWU’s Part 1 is the no-use declaration. ## Where do I put my AI declaration? Put your AI declaration where your brief or university says. UKZN wants it in the front section of all student work, the Wits Faculty of Science in the front matter of a postgraduate thesis, and King’s College London with your references. If nothing is specified, an appendix or acknowledgements section is a safe default. ## Can declaring AI cost me marks? Declaring permitted AI use should not cost you marks. King’s College London’s declaration says use within the scope of the assessment brief “will not have any direct impact on the grades awarded”. Undeclared use is the risk: Wits and Cambridge both treat undeclared AI-generated content as academic misconduct. ## Check your draft before you write the declaration The declaration is easier to write when every claim in your work traces back to a paper you have read. Add your papers to Litrevu, ask what they say, open each cited passage, and check your draft against them before you write the declaration. Free to start, no credit card required. Try Litrevu free ## Related Guides - How to Cite ChatGPT and AI Sources (APA, MLA, and Harvard) - Can I Use AI for My Dissertation? What's Allowed by Stage - How to Use AI for a Research Proposal, Section by Section - How to Prove You Wrote Your Own Work: Building a Paper Trail for 2026 --- # UNISA Dissertation Literature Review: A Distance-Student Guide URL: https://litrevu.com/blog/unisa-dissertation-literature-review-guide Category: Literature Review Published: 2026-06-11 Summary: A practical literature review guide for UNISA postgraduate students. How to study at a distance, work with limited supervisor contact, and build a cited review around a job and family. Literature Review ## UNISA Dissertation Literature Review: A Distance-Student Guide By Samuel de Bruyn · 11 June 2026 · 11 min read Studying at a distance, around a job and a family, is a different kind of hard. Here is a practical way to get your literature review done without a campus, a study group, or a free afternoon. UNISA is the largest university in Africa and one of the largest open-distance institutions in the world. If you are a UNISA postgraduate, you are probably studying around a full-time job, often with a family, with most of your contact happening through a screen rather than a corridor chat with your supervisor. That setup has real advantages, but it also means the literature review can feel lonely and shapeless. There is no one down the hall to ask “is this enough sources?” This guide is built for the realities of distance study: limited contact time, self-directed reading, and a schedule you have to defend from the rest of your life. The academic standard is the same as any other university. What changes is how you get there. Let us walk through it. ## The Three Distance-Study Challenges (and How to Handle Them) Distance students hit the same three walls again and again on the literature review. Naming them helps, because each has a practical response. - Limited supervisor contact. You cannot drop by an office, so feedback loops are slower. The response is to make every interaction count: send specific, well-prepared questions and a clear draft, not a vague “am I on track?” - Self-directed structure. Nobody is pacing you week to week. The response is to build your own milestones and treat them as real deadlines. - Isolation and momentum. Without classmates, it is easy to stall for weeks. The response is a small, repeatable weekly rhythm that does not depend on motivation. ## Step 1: Lock Your Research Question Early When supervisor feedback is slow, a wandering research question is expensive: you can read for weeks in the wrong direction before anyone tells you. Pin down a specific, answerable question before you go deep into the reading, and confirm it with your supervisor in writing. A strong question names the variable, the population, and the context. “Factors affecting employee motivation in South African public-sector organisations” is workable. “Employee motivation” is not. If you are still shaping yours, our guide on how to start a research paper covers narrowing a topic into a question. ## Step 2: Find Sources Without Walking Into a Library UNISA gives registered students online access to academic databases through the library portal, and that is your main resource. Combine it with Google Scholar and open-access repositories so you are not blocked when a paper sits behind a paywall. Prioritise peer-reviewed journal articles and recent work in your field, and keep an eye out for South African and African studies where your topic has local relevance, as examiners often value that context. Our guide on how to find academic sources covers search strategies that work entirely online. ## Step 3: Keep a Source Matrix So Nothing Slips Distance study is stop-start by nature, so you need a record that holds your thinking between sessions. A source matrix, one row per paper with the citation, main finding, method, and relevance to your question, is the simplest tool that does this. You capture a paper once and never have to re-read it to remember why it mattered. It also makes supervisor meetings far more productive: you can show exactly what you have covered and where the gaps are. More on this in how to organize research sources . Studying at a distance, on your own time? Litrevu reads the papers you have already pulled from the UNISA library and Google Scholar and answers your questions about them, each answer opening to the passage it came from. Free to start, no credit card needed. Try it free ## Step 4: Synthesise by Theme, Not by Paper The most common reason a literature review gets sent back is that it summarises one paper after another instead of building an argument. Examiners want synthesis: you grouping studies by the idea they speak to, showing where they agree, where they clash, and what is still unanswered. Work one theme at a time. A theme is a manageable goal you can finish across a few short sessions, which suits a distance schedule. Our step-by-step literature review guide and our list of common literature review mistakes both go deeper on getting synthesis right. ## Step 5: Make the Most of Limited Supervisor Time When you cannot pop in for a quick chat, every piece of feedback is precious. Help your supervisor help you: send a clear, readable draft, list the specific decisions you are unsure about, and ask focused questions. “Should I include grey literature for this theme?” gets a useful answer. “What do you think?” does not. Keep a written record of what each round of feedback asked for, so the next draft visibly addresses it. That continuity is harder to maintain at a distance, and it is exactly what reassures an examiner you have engaged with the supervision. ## How Long Should a UNISA Literature Review Be? Always follow your specific module guide and supervisor instructions first, as requirements differ by college and programme. As a rough orientation, a Masters dissertation literature review often runs several thousand words and a doctoral one considerably more, but the word count matters less than whether you have covered the key debates and shown the gap your study fills. For general ranges by degree level, see our guide on how long a literature review should be . When in doubt, the official UNISA tutorial letter for your module is the authority. ## Keep the Work Honestly Yours Distance study runs on trust, and academic integrity is non-negotiable. Use tools to organise your reading and find what your sources say, but the thinking and the writing have to be yours: your question, your chosen sources, your reading, your judgement about what the literature shows, and your own text. Check every citation against the original source. Many universities do not allow AI-written text in submitted work, even after you edit it, so check the current policy for your module and declare how you used AI. That is the standard your examiners expect, and it is the only approach that leaves you able to defend your dissertation with confidence. ## Ask Your Own Papers When you are studying alone at a distance, the slow, lonely part is working out what a folder of PDFs says together. That is where Litrevu helps. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Upload the papers you have gathered from the UNISA library and Google Scholar and ask what they say. See the themes across them and where they disagree, compare studies side by side, and paste a paragraph you wrote to see which claims your papers back. Every answer opens to the passage it came from. Free to start, no credit card required. Try Litrevu free ## Related Guides - How to Write Your Masters Literature Review While Working Full-Time - How to Write a Literature Review (Step-by-Step Guide for 2026) - How to Find Academic Sources for Your Research Paper - Litrevu for Thesis Research --- # How to Write Your Masters Literature Review While Working Full-Time URL: https://litrevu.com/blog/masters-literature-review-working-full-time Category: Literature Review Published: 2026-06-12 Summary: A realistic plan for writing your Masters literature review around a full-time job. How to use small pockets of time, organise your reading, and keep momentum without burning out. Literature Review ## How to Write Your Masters Literature Review While Working Full-Time By Samuel de Bruyn · 12 June 2026 · 10 min read You have a job, a life, and a thesis that is somehow due. Here is a realistic plan for getting your literature review done in the pockets of time you actually have. If you are doing a Masters part-time while holding down a full-time job, the literature review is the part that quietly eats your evenings and weekends. It is the longest single chunk of reading and writing in the whole degree, and it rarely fits into the neat blocks of time the full-time students seem to have. The good news: you do not need long blocks of time. You need a system that survives interruptions, picks up exactly where you left off, and turns a messy pile of PDFs into a structured, cited review one small session at a time. This guide is written for the juggling postgrad: distance students, part-timers, and anyone studying around shifts, a commute, or a family. No advice here assumes you have a free Tuesday afternoon. ## Why It Feels Impossible (and What Actually Helps) The literature review feels impossible for working students for three specific reasons, and each one has a fix. - Context-switching cost. Every time you sit down, you spend 20 minutes remembering where you were. The fix is a system that holds your place for you, so you can start writing in the first five minutes. - The reading pile never shrinks. Forty open tabs and a folder of unread PDFs is paralysing. The fix is to stop trying to read everything and start synthesising what you have. - Perfectionism on the first draft. You try to write polished paragraphs at 10pm after a full day. The fix is to separate drafting from polishing, and only polish when your brain is fresh. ## Step 1: Define Your Scope Before You Read Anything Else The single biggest time-saver is a narrow, well-defined research question. When your question is specific, you can look at a paper and decide in 30 seconds whether it belongs in your review. When it is vague, every paper feels relevant and you drown. Spend one short session writing a single sentence: “My review covers research on [topic] in [context/population] between [years].” That boundary is permission to ignore everything outside it. If you are still shaping the question, our guide on how to start a research paper walks through narrowing a topic into a workable question. ## Step 2: Build a Source Matrix You Update in Five Minutes A source matrix is a simple table: one row per paper, columns for the citation, the main finding, the method, and how it connects to your question. For a working student, this table is the thing that survives between sessions. You do not have to re-read a paper because you already captured what mattered. Whenever you finish a paper, even on your phone during a commute, add a row. One row is progress. Ten rows is a literature review taking shape. We cover this in more depth in how to organize research sources . ## Step 3: Write in Small Sessions, Not Heroic Weekends Waiting for a free weekend is a trap. The weekend gets eaten by life, and you fall further behind, which makes the whole thing feel heavier. Instead, commit to small, repeatable sessions: 30 to 45 minutes, three or four times a week. The trick that makes small sessions work is leaving yourself a breadcrumb. End every session by writing one line about what you will do next: “Next: write the paragraph comparing Smith and Patel on sample size.” You walk straight into the work next time instead of re-reading your own draft to find your place. Organise your review thematically, not paper-by-paper. Group studies by the idea they speak to, then write one theme at a time. A theme is a bite-sized goal you can finish in a couple of sessions, which keeps the momentum going. Our full step-by-step literature review guide covers thematic structure in detail. Short on time, not on standards? Litrevu reads the papers you have already gathered, so a 30-minute session can start with a question: what do they say on the theme in front of you? Every answer opens to the passage it came from. Free to start, no credit card needed. Try it free ## Step 4: Separate Drafting From Polishing After a full day of work, your brain is not at its sharpest, and that is fine. Use low-energy time for low-stakes tasks: adding rows to your matrix, fixing citations, reorganising paragraphs. Save the genuinely hard thinking, the synthesis and the argument, for your freshest 30 minutes, even if that is early before work. A rough draft that exists beats a perfect draft that does not. Get the ideas down in plain sentences, then come back and tighten them in a separate session. Trying to do both at once is what makes a single paragraph take an hour. ## Step 5: Protect Your Citations as You Go Nothing wastes a working student's scarce time like rebuilding a reference list the night before submission. Capture the full citation the moment you add a paper to your matrix, in the style your department requires. If you are unsure which style to use, see our comparison of the six main citation styles . Keeping references clean throughout means the final formatting pass is a quick check, not a panicked all-nighter. That is exactly the kind of low-energy task you can knock out on a tired evening. ## A Realistic Weekly Rhythm Here is what a sustainable week can look like when you are studying around a job. Adapt it to your own schedule; the point is small and consistent, not long and rare. Two weekday mornings (30 min each): Your freshest time. Draft or synthesise one theme. Commute or lunch break (15 min): Read one paper, add one row to your source matrix. One weekday evening (low energy): Tidy citations, reorganise, fix formatting. No hard thinking required. One weekend session (60 min): Read back the week's writing, stitch themes together, leave a breadcrumb for Monday. That is roughly three hours a week. It does not look heroic, but it compounds. Over a couple of months, three hours a week is a finished literature review. ## Working Smart Is Not Cutting Corners Studying around a job means being efficient, but efficient is not the same as dishonest. The work still has to be yours: your question, your sources, your reading, your judgement about what the literature says. Tools can help you organise your reading and find what your sources say, but you are the one who reads the passages, checks every citation against the source, writes the text, and signs your name to it. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution's policy and declare how you used AI. That is the right way to use any research tool, and it is the only way that holds up when your supervisor asks you to defend a claim. ## Make Your 30 Minutes Count When time is your scarcest resource, the slow part is finding what a pile of PDFs actually says on the theme in front of you. That is the part Litrevu helps with. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Upload the papers you have already gathered and ask what they say. See the themes across them, compare studies side by side, and paste a paragraph you wrote to see which claims your papers back. Every answer opens to the passage it came from, and the writing stays yours. Free to start, no credit card required. Try Litrevu free ## Related Guides - How to Write a Literature Review (Step-by-Step Guide for 2026) - How to Organize Research Sources (So You Don't Lose Your Mind) - How Long Should a Literature Review Be? (Word Count Guide by Degree) - Litrevu for Thesis Research --- # How to Pay for Litrevu in Kenya with M-Pesa or Card URL: https://litrevu.com/blog/how-to-pay-for-litrevu-in-kenya Category: Getting Started Published: 2026-05-22 Summary: The reliable way to pay from Kenya is the M-Pesa GlobalPay virtual Visa card. An international Visa or Mastercard works too. Prices show in Kenyan Shillings automatically. Getting Started ## How to Pay for Litrevu in Kenya By Samuel de Bruyn · 22 May 2026 · 3 min read · Updated 21 June 2026 The route we recommend from Kenya is the M-Pesa GlobalPay virtual Visa card. An international Visa or Mastercard works too. Prices show in Kenyan Shillings automatically. Here's the step-by-step. ## Pricing in Kenyan Shillings Three passes, all one-time purchases (no subscriptions): - Starter : 7 days (a deadline this week) - Scholar : 3 months (thesis-sized) - Platinum : 12 months (labs, power users) When you open the pricing page from Kenya, KSh prices show automatically. Nothing to toggle. ## Option 1: M-Pesa GlobalPay virtual Visa card Recommended This is the route we recommend for Kenya. Safaricom's GlobalPay creates a normal Visa card number funded straight from your M-Pesa balance, so it goes through at the Litrevu checkout even when a local card gets declined. It takes about a minute to set up: - Open the M-Pesa app and find Global Pay (it sits under the in-app services). - Create your virtual Visa card and load it from your M-Pesa balance with at least the price of your pass. - The app shows a card number, expiry date and CVV. Keep that screen open. - Back on the Litrevu pricing page , pick your pass, choose to pay by card, and enter those details. That's it. ## Option 2: International Visa or Mastercard A Visa or Mastercard from a Kenyan bank can work at checkout, but only if international online transactions are switched on. Most banks (Equity, KCB, NCBA, Co-op, Stanbic, Absa, Standard Chartered) have that turned off by default, which is why a local card is often declined on the first try. Open your banking app, enable “online” or “international” transactions, then try the checkout again. If it still fails, use the GlobalPay card in Option 1, which completes Kenyan checkouts reliably. ## Option 3: Google Pay If you already have a working card saved in Google Pay, it can be the fastest path: tap Google Pay at checkout and confirm with your fingerprint or face, no card numbers to type. It only works if the card behind it supports international online payments, so the same rule as Option 2 applies. ## What about paying with M-Pesa directly? Not yet. STK Push and Paybill aren't plugged into our checkout, so the GlobalPay virtual Visa card in Option 1 is the way to pay from your M-Pesa balance today. Direct M-Pesa is on our roadmap. If it's the one thing stopping you, let us know. Demand is what bumps it up the queue. Back to checkout Try before you pay Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Free to start. No card needed. Add a few of your papers, ask them a real question, see if Litrevu actually works for your topic, then decide. Sign up free ## Related Articles - How to Write a Literature Review (Step-by-Step Guide for 2026) - How to Turn Your Research Papers into a Literature Review - Can AI Write a Literature Review? What You Need to Know (2026) --- # How to Write a Literature Review: 5 Steps + Examples URL: https://litrevu.com/blog/how-to-write-a-literature-review Category: Literature Review Published: 2026-04-19 Summary: A literature review summarises, compares and critiques published research on your question and shows the gap. Five steps, three structures, examples. Literature Review ## How to Write a Literature Review: 5 Steps + Examples By Jessica McLaren · 19 April 2026 · 12 min read · Updated 2 November 2026 To write a literature review, search for the published research on your question, read and note each source, group the sources into themes, write each theme as a synthesis of several sources, and revise until the review ends on the gap your study fills. The same five steps work for a 2,000-word undergraduate review and an 8,000 to 10,000-word PhD chapter; only the number of sources changes. Literature review: a piece of writing that summarises and synthesises what published research says about a topic, shows where studies agree and disagree, and identifies the gap a new study can fill. A literature review can be a chapter of a thesis or dissertation, a section of a research paper or proposal, or a standalone assignment. ## What is a literature review? A literature review is a summary and synthesis of the published research on one topic, organised to show what is known, where studies disagree and what is still missing. The University of North Carolina Writing Center defines a literature review as writing that “ discusses published information in a particular subject area ”, and says its focus “is to summarize and synthesize the arguments and ideas of others.” The difference between summary and synthesis is the whole game. Here is a quick test you can run on any paragraph: - Summary: “(Author A, Year) found X. (Author B, Year) found Y.” - Synthesis: “(Author A, Year) and (Author B, Year) both studied X, but their conclusions differ on Y, which suggests a gap in…” If a paragraph reads like the first line, it is summarising. Rewrite it until it reads like the second. A good literature review does three jobs. It maps what is known, it shows what is missing, and it justifies your own research question. Not sure whether you need a literature review or a systematic review? Literature review vs. systematic review sets out the differences. ## How do you write a literature review step by step? You write a literature review in five steps: search, read, organise into themes, write, and revise. The University of Kent’s literature review guide describes the same work: searching for “reliable, accurate and up-to-date material”, reading and summarising the key points, synthesising them into “a summary of what is known”, evaluating them, and identifying “areas of debate or controversy” , before preparing the ground for new research. Step What you do What you end up with 1. Search Turn your research question into 2 to 5 keywords and search databases such as Google Scholar, Scopus or your library catalogue A list of candidate papers 2. Read and note Read the abstract, introduction and conclusion first, then the methods and results of the papers that matter One row of notes per paper: finding, method, sample, link to your question 3. Organise Group the papers by theme, finding or method An outline: one heading per theme 4. Write Write each theme as a synthesis of 2 to 4 sources A first full version of the review 5. Revise Check each paragraph makes a point, every claim is cited, and the review ends on the gap A review your supervisor can follow Here is each literature review step in a little more detail. - Search for sources. Pull 2 to 5 keywords from your research question and combine them with Boolean operators: "remote work" AND "productivity" returns only papers that contain both phrases. Then check the reference lists of the best papers you find. How to write a search strategy shows how to build a full Boolean string, the free search string builder builds one for you, and snowballing in a literature review covers citation chaining. - Read and note. You do not need to read every paper cover to cover. Note the same things for every source so you can compare them later. A literature review matrix gives you one row per paper and one column per question. - Organise into themes. Stop thinking paper by paper and start thinking theme by theme. Which papers agree? Which contradict each other? Which use the same method? That list of clusters is your outline. How to structure a literature review by theme walks through it with a before-and-after example. - Write the review. Start each paragraph with a claim, not a paper. Bring in 2 to 4 sources as evidence, say what the evidence means, then link to the next point. How to synthesize sources in a literature review has more paragraph patterns. - Revise. Can you sum up each paragraph in one sentence? Does every claim have a citation, and does every citation appear in your reference list? Does the literature review end by naming the gap? The APA citation guide and how to cite sources in a research paper cover the referencing check. Kent’s guide adds one timing rule worth keeping: “ only attempt to write up the literature review when you have completed all the reading and note-taking ”. ## What format does a literature review follow? A literature review follows the same three-part format as most academic writing: an introduction, a body that discusses the sources, and a conclusion. The University of Texas at Dallas library guide says literature reviews “ must contain at least three basic elements ”: an introduction or background section, a body “containing the discussion of sources”, and a conclusion or recommendations section. Section What goes in it Share of the words Introduction The topic, the scope of the literature review, how you chose sources, and how the review is organised Short: a paragraph or two Body One section per theme, trend or method, each discussing several sources together Most of the word limit Conclusion What the literature review shows overall, the inconsistencies and gaps, and how the gap leads to your study Brief The University of Kent describes the same shape: a beginning that outlines how you chose your sources and presents the theme, then “ using most of the word limit to analyse the chosen books or articles thoroughly ”, “before pulling everything together briefly in the conclusion.” The University of Nevada, Las Vegas Writing Center says the literature review conclusion “ draws attention to any methodological flaws, inconsistencies, or gaps in the research. ” Within the body, the format is flexible. Your department’s handbook or your supervisor sets the final format, including headings and citation style. ## How do you structure a literature review? You structure the body of a literature review in one of three ways: by theme, by time (chronologically) or by research method. The University of Texas at Dallas library guide says the body of a literature review is “ organized either chronologically, thematically, or methodologically ”. Structure How the literature review is organised Best for Thematic Around topics or issues, “rather than the progression of time” (University of Texas at Dallas) Most theses, dissertations and research papers Chronological By publication date, or by how a trend developed over time Fields where the history of an idea is part of your argument Methodological By the methods researchers used, for example qualitative studies, then quantitative, then mixed methods Topics where the method shapes the findings If you are unsure, choose a thematic structure. You can also mix them: a thematic literature review often traces a short chronology inside each theme. For a worked example of the thematic approach, see how to structure a literature review by theme . ## How long should a literature review be? A literature review is usually about 20% of a dissertation’s word count: about 2,000 words in a 10,000-word undergraduate dissertation and 3,000 to 4,000 words in a 15,000 to 20,000-word master’s. The University of Kent puts a PhD literature review at “ perhaps 8-10,000 words ”, one chapter of the thesis. Dissertation or thesis Literature review length Sources to cite University of Kent’s figure 10,000 words, undergraduate About 2,000 words 13 to 20 “no more than 2,000 words” 15,000 words, master’s About 3,000 words 20 to 30 “around 2-3,000 words” 20,000 words, master’s About 4,000 words 27 to 40 “around 2-3,000 words” 80,000 words, PhD About 9,600 words 64 to 96 “perhaps 8-10,000 words” The 20% share sits inside the 15 to 25% of the word limit per chapter that the University of Hull’s dissertation guide quotes from Bryan Greetham’s How to Write Your Undergraduate Dissertation . Where Kent’s master’s figure and the 20% share disagree, plan from your own word limit, because that is the number your marker holds you to. How long should a literature review be has every level, a calculator and figures by country. ## How many sources should a literature review have? Plan to cite one source for every 100 to 150 words of literature review: about 13 to 20 sources in a 2,000-word review and 64 to 96 in a 9,600-word PhD chapter. That is Litrevu’s planning rule. For the sources you discuss in depth, the University of Kent’s rough rule is “ 8-10 significant pieces ” for an 8,000-word dissertation and “up to 20 major pieces of work for 12-15,000 words.” Not every source carries the same weight. A few core studies get a paragraph on their method and findings. Most sources are cited in a sentence alongside others. Some are brief citations for a definition or context. How long should a literature review be breaks the source counts down by word limit, and how recent should sources be in a literature review covers the age of your sources. ## How do you write a literature review for a dissertation or thesis? A dissertation or thesis literature review uses the same five steps, but it has to end by showing the gap your own study fills, and it usually sits in its own chapter after the introduction. In the US, a master’s student writes a master’s thesis and “dissertation” usually means the PhD dissertation; in the UK, undergraduate and master’s students write dissertations and PhD students write theses. Three things change at dissertation level: - Placement. The Australian National University notes that “ in many theses, there is a brief literature review in the introductory chapter ” “then a longer literature review chapter after the introduction”, and that in some science theses a literature review in the introduction is enough. - Length. A master’s thesis literature review is usually 2,000 to 4,000 words, and a PhD dissertation literature review is usually one chapter of 8,000 to 10,000 words. US programmes often set pages rather than words: Boston University’s Emerging Media Studies master’s thesis guidelines say “ anything under 10 pages is likely too cursory of a review. ” - The ending. A dissertation literature review closes on the specific gap your research question answers, so the methodology chapter can follow from it. How to find a research gap shows how to name one. If you are writing the shorter literature review inside a proposal first, how to write a literature review for a research proposal covers that version, and research paper structure shows where the literature review sits in a full paper. ## What does a good literature review paragraph look like? A good literature review paragraph opens with a claim about the literature, supports it with two to four sources, explains where those sources agree or differ, and links the point to your research question. A weak literature review paragraph describes one paper after another. Steal this template, and fill the brackets from your own notes. The example below is a format illustration, not real research. Weak (summary): (Author A, Year) studied [topic] in [setting] and found [finding]. (Author B, Year) also studied [topic] and found [finding]. (Author C, Year) used [method] and found [finding]. Strong (synthesis): Studies of [topic] agree that [shared finding] (Author A, Year; Author B, Year), but they disagree on [point of difference]. (Author A, Year) attributes the difference to [factor], while (Author C, Year), using [method], finds [contrasting finding]. Because none of these studies examined [setting or group], it remains unclear whether [shared finding] holds there, which is the question this study addresses. The strong version follows a four-part pattern you can reuse for almost any body paragraph: - Topic sentence: the claim or theme. - Evidence: 2 to 4 sources that support, extend or contradict the claim. - Analysis: where the sources agree, where they differ, and why. - Link: how the point leads to the next theme or to your research question. For a full annotated literature review, see the literature review example . ## What are the most common literature review mistakes? The most common literature review mistake is summarising sources one by one instead of synthesising them by theme. The University of North Carolina Writing Center’s advice is to “ summarize and synthesize your sources within each paragraph as well as throughout the review ”, and that “your voice (the writer’s) should remain front and center.” Six literature review mistakes come up again and again, and each has a simple fix: - Summarising instead of synthesising. If paragraphs read “Author A found X. Author B found Y.”, restructure them by theme. - Including every source you read. Keep only sources that bear on your research question. - Leaving out contradictory studies. Studies that disagree with your expectation belong in the literature review, with an explanation of why they differ. - Quoting too much. UNC says “some short quotes here and there are okay” to emphasise a point; the rest should be your own paraphrase, cited. - No clear structure. Each theme should lead to the next, with a transition sentence between them. - No gap statement. A literature review that never names what is missing leaves the reader asking why your study is needed. Common literature review mistakes covers each literature review mistake with fixes. ## How do you write a literature review from your own papers with an AI assistant for writing backed by sources? An AI assistant for writing backed by sources helps you with steps 2 to 5 of a literature review: reading your papers, seeing how they group into themes, and checking that each claim in your draft matches a source. You still decide the themes, make the argument and write the literature review yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Here is the Litrevu workflow for a literature review, step by step: - Add your papers. Upload your PDFs, paste a PDF link, a DOI or an arXiv link, or pick open-access papers Litrevu finds on your topic. - Ask your papers about themes. Ask “Which themes run through these papers?” or “Where do these studies disagree about [topic]?” Each answer cites only your papers, and Litrevu says so when your papers do not cover a question. - Open the passage. Open any citation to see the passage highlighted on the page of the PDF it came from, so you read the evidence yourself before you use it. - Compare studies in a table. Line up the studies on one theme side by side, with citations, to see where their methods and findings agree and differ. That table is the raw material for a synthesis paragraph. - Check your own paragraph. Paste a paragraph you wrote. Each claim comes back Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover that claim, not that a gap exists in the literature; check the wider literature before you call something a gap. - Cite and export. Switch between APA, MLA, Chicago, IEEE, Harvard and Vancouver, and export your references to BibTeX or RIS. ## Frequently asked questions about writing a literature review ## How do I start a literature review? Start a literature review by writing your research question in one sentence and pulling 2 to 5 search keywords from it. Search for sources, read and note them, and group them into themes before you write anything. The University of Kent advises writing up only once the reading and note-taking are complete. ## What is the difference between a literature review and an essay? An essay argues your own thesis and uses sources as evidence, while a literature review summarises and synthesises what other researchers have published on a topic and ends by identifying a gap. Both need a clear argument and your own voice. Literature review vs. essay compares the two in detail. ## What is the difference between a literature review and a systematic review? A traditional literature review selects and synthesises the research most relevant to your question, while a systematic review follows a pre-set, documented protocol to find all eligible studies. The Cochrane Handbook says a systematic review “attempts to collate all the empirical evidence that fits pre-specified eligibility criteria.” Literature review vs. systematic review sets out the differences. ## Can AI write a literature review? AI tools can produce text that looks like a literature review, but many universities do not allow AI-written text in submitted work, even after you edit it. Check your university’s AI policy, use AI to read, search and compare your sources, write the review yourself, and declare how you used AI. Can AI write a literature review explains where the line sits. ## Does a literature review need its own conclusion? Yes. A literature review ends with a short conclusion that pulls the themes together and names the inconsistencies and gaps in the research. The University of Kent describes it as “pulling everything together briefly in the conclusion.” In a dissertation or thesis, that conclusion leads into your research question or methodology. ## How long should a literature review be for a master’s thesis? A master’s literature review is usually 2,000 to 4,000 words. The University of Kent puts it at around 2,000 to 3,000 words, and 20% of a 15,000 to 20,000-word dissertation is 3,000 to 4,000 words. Your programme handbook overrides both figures. ## Ready to write your literature review from your own papers? The hardest part of a literature review is knowing what your papers say well enough to build an argument across them. Add the papers you already have to Litrevu, ask which themes run through them, open the passage behind every answer, and check your own paragraphs against your sources. The thinking and the writing stay yours. Try Litrevu free . Free to start, no credit card required. ## Related Guides - How Long Should a Literature Review Be? By Level and Country - Literature Review Example: Annotated Sample You Can Follow - How to Structure a Literature Review by Theme (With Examples) - How to Synthesize Sources in a Literature Review (Step-by-Step, With Examples) --- # How to Start a Research Paper (When You Have No Idea Where to Begin) URL: https://litrevu.com/blog/how-to-start-a-research-paper Category: Getting Started Published: 2026-04-19 Summary: The 6-step process for going from blank page to working outline. Pick a topic, form a question, scan the literature, and start writing. Guides ## How to Start a Research Paper (When You Have No Idea Where to Begin) By Samuel de Bruyn · 19 April 2026 · 9 min read Six practical steps to go from blank page to solid first draft. No fluff, no academic jargon, just the process that works. You have the assignment. You might even have a vague idea of what you want to write about. But when you open a blank document, nothing happens. The cursor blinks. Your brain goes quiet. And suddenly reorganizing your desk feels like the most productive thing you could possibly do. Sound familiar? You are not the problem. Starting is genuinely the hardest part of writing a research paper. ## Why Starting Is the Hardest Part Research papers feel overwhelming because they demand two things at once: creative thinking and structured writing. Your brain has to generate ideas and organize them into a rigid format, and those are completely different cognitive tasks. Trying to do both simultaneously is like trying to sketch a blueprint while the building is already going up. The fix is simple: separate the two. First, figure out what you want to say. Then figure out how to say it. The six steps below walk you through exactly that. ## Step 1: Pick a Topic (Then Narrow It Down) If your professor gave you a broad subject area, your first job is to shrink it. A research paper on “climate change” is not a paper, it is a textbook. A paper on “the impact of urban heat islands on emergency room admissions in Phoenix, Arizona” is a paper. The narrowing formula is straightforward: start with a broad field, pick a specific angle, and add a constraint. The constraint can be geographic, temporal, demographic, or methodological. “Social media and mental health” becomes “the relationship between Instagram usage and anxiety in college students aged 18 to 24.” A good litmus test: if you can explain your topic in one sentence and someone outside your field understands it, the scope is right. ## Step 2: Form a Research Question Your topic gives you a direction. Your research question gives you a destination. It should be specific, answerable with evidence, and genuinely debatable. “Is social media bad?” is a conversation starter, not a research question. “Does daily Instagram use exceeding two hours correlate with higher self-reported anxiety scores among undergraduate students?”, that you can investigate. Write down three to five candidate questions. Then pick the one that has enough existing literature to support it but still leaves room for your own contribution. If you want a deeper dive on turning your question into an argument, check out our guide on how to write a thesis statement . ## Step 3: Do a Quick Literature Scan Notice I said “scan,” not “review.” At this stage you are not writing anything. You are spending 30 to 60 minutes on Google Scholar , your university database, or a tool like Semantic Scholar to find out what already exists on your topic. Look for three things: (1) seminal papers that everyone in the field cites, (2) recent studies from the last two to three years, and (3) gaps, questions nobody has answered yet. Download 10 to 15 papers that look relevant and skim the abstracts. You are building a mental map of the landscape, not reading every word. This step serves a dual purpose. It validates that your research question is viable, and it gives you the raw material you will need when you eventually write your literature review . ## Step 4: Write a Thesis Statement A thesis statement is a single sentence that declares the main argument or finding of your paper. It is not a fact. It is not a question. It is a claim that the rest of your paper will support with evidence. Think of it as a promise to your reader: “By the end of this paper, I will have shown you that X is true (or likely, or worth considering).” Your thesis will probably change as you write, that is normal. But having a working version now gives you a north star for every paragraph that follows. A weak thesis says what the paper is about. A strong thesis says what the paper argues. “This paper examines social media and anxiety” is weak. “Daily Instagram use exceeding two hours is a significant predictor of anxiety in undergraduate populations, independent of pre-existing mental health conditions” is strong. For a full breakdown, see our thesis statement guide . Have your papers but can't get started? Litrevu reads your uploaded PDFs and answers your questions about them, with the passage behind every answer. Free to start, no credit card. Try Litrevu free ## Step 5: Create an Outline An outline is the skeleton of your paper. It does not need to be pretty. It just needs to show what goes where. For most research papers, the standard structure looks like this: - Introduction (hook, context, thesis, roadmap) - Literature Review (what others have found, where the gaps are) - Methodology (how you collected and analyzed your data) - Results (what you found) - Discussion (what it means) - Conclusion (so what, and what next) Under each heading, jot down two to four bullet points describing what that section will cover. This takes 15 minutes, and it will save you hours of aimless writing later. Your outline is not a contract, you can change it. But it gives you a path to follow when you sit down to draft. ## Step 6: Write the Introduction First (or Last) Here is where opinions diverge. Some writers swear by writing the introduction first because it forces you to articulate your argument before you get lost in the details. Others prefer to write it last because by then you know exactly what the paper says. Both approaches work. The “introduction first” camp argues that a strong opening creates momentum. You write the hook, lay out the problem, state your thesis, and suddenly the next section feels obvious. The “introduction last” camp argues that you cannot introduce something you have not written yet, and any introduction you draft early will need to be rewritten anyway. Our recommendation: write a rough introduction first to orient yourself, then come back and polish it once the rest of the paper is done. You get the momentum benefit without wasting time on perfection. If you want a detailed walkthrough, our guide on how to write a research paper introduction covers every paragraph. ## The “Just Start” Approach vs. the Outline Approach You will hear two schools of thought from experienced researchers. The first says: stop overthinking and start typing. Write badly. Write out of order. Write in bullet points. The goal is to get raw material on the page that you can shape later. Perfectionism is the enemy of progress, and a bad first draft is infinitely more useful than no draft at all. The second says: plan first, write second. Build the outline, organize your sources, know exactly what each paragraph will argue, and then write in order from top to bottom. This approach produces cleaner first drafts and reduces the pain of revision. The truth is that most successful writers use a hybrid. They outline loosely, start writing wherever they feel most confident, and let the structure emerge as the ideas develop. If you are stuck, write the section you understand best , even if it is the methodology or results. Movement in any direction is better than paralysis. ## Quick-Start Checklist Pin this somewhere visible. When you sit down to start your next research paper, work through these items in order. - 1. Narrow your topic , broad field + specific angle + constraint. - 2. Write a research question , specific, evidence-based, debatable. - 3. Scan the literature (30 to 60 min) , find seminal papers, recent work, and gaps. - 4. Draft a thesis statement , one sentence, arguable, specific. - 5. Build an outline , section headings + 2 to 4 bullets each. - 6. Write a rough introduction , hook, context, thesis, roadmap. Polish later. - 7. Start the section you know best , momentum matters more than order. ## Have Your Papers but Can't Get Started? You have done the reading. You have a stack of PDFs. But seeing what they add up to, and where your own paper fits, still feels impossible. That is what Litrevu is built to help with. Upload your reference papers, ask what they say about your question, compare their findings side by side, and plan an outline before you write. Every answer links to the passage it came from. Free to start, no credit card required. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Try Litrevu free ## Related Guides - Research Paper Structure: The Complete Guide for Students - How to Write a Thesis Statement (Examples That Actually Work) - How to Write a Research Paper Introduction (Formula + Examples) - Litrevu for Research Papers --- # How to Write a Thesis Statement (Examples That Actually Work) URL: https://litrevu.com/blog/how-to-write-a-thesis-statement Category: Getting Started Published: 2026-04-19 Summary: What makes a strong thesis statement, a proven formula you can use, and 5 weak-to-strong rewrites you can steal for your own paper. Guides ## How to Write a Thesis Statement (Examples That Actually Work) By Jessica McLaren · 19 April 2026 · 8 min read Your thesis statement is the single most important sentence in your entire paper. Get it right, and everything else falls into place. Get it wrong, and you'll wander through 3,000 words with no direction. Here's exactly how to nail it. Here's a stat that should terrify you: most professors decide whether your paper is worth reading within the first paragraph. And the sentence they're scanning for? Your thesis statement. A weak thesis statement signals a weak paper. A strong one tells your reader exactly what you're arguing, why it matters, and what to expect. It's the difference between a B-minus and an A. The good news? Writing a strong thesis statement is a learnable skill. There's a formula. There are tests you can run. And once you internalize the pattern, you'll write better thesis statements in five minutes than most students produce after hours of agonizing. Let's break it down. ## What Is a Thesis Statement, Really? A thesis statement is one sentence that makes a clear, defensible claim about your topic. It tells your reader the central argument of your paper, the position you're going to spend the rest of your writing defending with evidence. Think of it as a promise to your reader. You're saying: “This is what I believe, and here's what I'm going to prove.” Every paragraph that follows should connect back to that promise. A thesis statement is not a topic. “This paper is about climate change” is a topic announcement, not a thesis. A thesis takes a position: “Climate change disproportionately affects coastal communities in developing nations because of inadequate infrastructure, limited government funding, and population density.” See the difference? One is a label. The other is an argument. Your thesis statement must always be an argument. ## The 3 Qualities Every Strong Thesis Statement Shares Every thesis statement that works, whether it's for a five-page essay or a 200-page dissertation, shares three qualities. Miss even one, and the whole thing falls apart. 1. Specific Your thesis narrows the topic to a precise claim. No vague generalizations. A reader should know exactly what your paper covers after reading this one sentence. 2. Arguable A reasonable person could disagree with your thesis. If everyone already agrees with your statement, you don't have a thesis, you have a fact. “Exercise is good for health” is not arguable. “Mandatory physical education reduces adolescent depression rates more effectively than counseling programs” is. 3. Concise One sentence. Two at the absolute maximum. If your thesis statement takes an entire paragraph, you're trying to say too much. Strip it down until only the core claim and your main reasons remain. ## The Thesis Statement Formula (Use This Template) If you're staring at a blank screen, start here. This formula works for argumentative, analytical, and expository papers. You can refine the language later, but the structure gives you a skeleton to build on. The formula: Although [counterargument], [your position] because [reason 1], [reason 2], and [reason 3]. Example: “Although social media platforms claim to protect user privacy, they systematically exploit personal data because advertising revenue depends on behavioral targeting, privacy policies are deliberately opaque, and regulatory enforcement remains inadequate.” Why does this formula work so well? Because it does three things at once. It acknowledges the opposing view (which shows academic maturity), it states your position clearly, and it previews your three supporting arguments. Your reader now has a roadmap for your entire paper. You don't have to use the “Although” opener every time. For simpler papers, you can drop the counterargument and lead with your claim: “[Your position] because [reason 1], [reason 2], and [reason 3].” But the full version is stronger because it shows you've considered the other side. ## 5 Weak vs. Strong Thesis Statement Examples Theory is helpful. Examples are better. Here are five real before-and-after transformations. Study the pattern. Notice how each strong version adds specificity, a clear position, and supporting reasons. Weak “Social media is bad for teenagers.” Strong “Unrestricted social media access increases adolescent anxiety because algorithmic feeds reward negative content, comparison culture distorts self-image, and sleep disruption compounds both effects.” Weak “Renewable energy is important.” Strong “Although nuclear energy offers high output with low emissions, solar and wind power represent more sustainable long-term solutions because they carry no waste-storage risk, costs have dropped 90% since 2010, and decentralized grids improve energy security.” Weak “This paper will discuss the causes of World War I.” Strong “While militarism and imperial rivalry set the stage for World War I, the alliance system was the decisive factor because it transformed a regional dispute into a continental war within weeks.” Weak “Machine learning has many applications in healthcare.” Strong “Convolutional neural networks outperform radiologists in early-stage lung cancer detection because they process thousands of scans without fatigue, identify sub-pixel patterns invisible to the human eye, and reduce diagnostic turnaround from days to seconds.” Weak “Remote work has pros and cons.” Strong “Although remote work reduces commute time and office costs, it undermines long-term career advancement for junior employees because they receive less informal mentorship, fewer high-visibility project assignments, and weaker professional networks.” Got a thesis? Check it against your sources. Upload your reference papers, ask what they say on your question, and see which passages back your claim. Free to start. Try Litrevu free ## Where Does Your Thesis Statement Go? Your thesis statement belongs at the end of your introduction. Not the beginning. Not buried in paragraph three. The last sentence of your opening paragraph. Why? Because your introduction does two jobs. First, it provides context, enough background for your reader to understand the topic. Second, it narrows that context down to your specific argument. The thesis statement is the payoff. It's the moment you stop setting the scene and start making your case. If you're unsure how to build up to your thesis, check out our guide on how to write a research paper introduction . It walks through the funnel structure step by step. ## How to Test Your Thesis: The “So What?” Test You've written your thesis statement. Now stress-test it. Read it out loud and ask yourself these four questions: - “So what?” , Does this matter? If a reader can shrug and say “who cares,” your thesis lacks significance. Add stakes. - “Can someone disagree?” , If no reasonable person would argue the opposite, you're stating a fact, not making a claim. Push harder. - “How will I prove this?” , Can you actually find evidence for each reason you listed? If not, pick reasons you can support with your sources. - “Does this pass the specificity check?” , Could someone mistake your thesis for a paper on a different topic? If yes, narrow it down until the claim is unmistakable. If your thesis survives all four questions, you're in good shape. If it fails even one, revise before you write another word. Fixing your thesis after drafting the full paper usually means rewriting the whole paper. ## Common Thesis Statement Mistakes (and How to Fix Them) These are the five errors that show up in almost every first draft. Knowing them upfront saves you a painful revision cycle. 1. Announcing instead of arguing “This paper will examine...” is not a thesis. Delete “this paper will” and state your claim directly. Your reader doesn't need a table of contents, they need a position. 2. Being too vague “Technology has changed education” could mean anything. Which technology? What change? For whom? Keep asking “which?” and “how?” until you can't get more specific. 3. Stating a fact instead of a claim “The Earth's temperature has risen 1.1°C since pre-industrial times.” That's measurable data, not an argument. A thesis would take a position on what should be done about it, or which cause is most significant. 4. Cramming too much into one sentence If your thesis has four commas, two semicolons, and a subordinate clause nested inside another subordinate clause, it's doing too much. Split the claim into a primary thesis and save the nuance for your body paragraphs. 5. Writing the thesis first and never revising it Your thesis will evolve as you research. Write a working version early, but revisit it after you've finished your literature review and body sections. The final thesis should reflect what you actually argued, not what you planned to argue. ## Putting It All Together Let's recap the process. When you sit down to write a thesis statement, follow this sequence: - Pick a specific topic and do enough reading to form an opinion. If you need help finding direction, our guide on how to start a research paper can help. - Use the formula: “Although [counterargument], [your position] because [reason 1], [reason 2], and [reason 3].” - Run the “so what?” test. If your thesis fails any of the four questions, revise it now. - Place it at the end of your introduction paragraph. - Revisit after drafting your paper. Sharpen the language to match what you actually wrote. Asking your own papers what they say on your question, and checking your claim against the passages they return, is often what makes a vague thesis statement specific enough to defend. That's it. No magic. No mystery. Just a clear process that produces clear writing. Your thesis is set. Now test it against your sources. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Upload your reference papers and ask Litrevu what they say on your question. Paste your thesis statement and see which of its claims your papers back, with the passages that decide it. Every answer opens to the exact passage, so the evidence you defend is evidence you have read. Try it free → ## Related Guides - How to Start a Research Paper (When You Have No Idea Where to Begin) - How to Write a Research Paper Introduction (Formula + Examples) - How to Write a Research Proposal (7-Section Template + Examples) - Litrevu for Thesis Research --- # Research Paper Structure: Sections in Order + Word Counts URL: https://litrevu.com/blog/research-paper-structure Category: Getting Started Published: 2026-04-19 Summary: Most papers follow IMRaD: introduction, methods, results, discussion. See how many words each section gets, what goes in it, and the mistakes to avoid. Guides ## Research Paper Structure: Sections in Order + Word Counts By Jessica McLaren · 19 April 2026 · 15 min read · Updated 22 October 2026 A research paper runs in this order: title, abstract, introduction, literature review, methods, results, discussion and conclusion, followed by the references and any appendices. In a typical 8,000-word paper, the introduction takes about 10% of the words, the literature review 20%, the methods 15%, the results 20%, the discussion 25% and the conclusion 10%. Research paper structure is the fixed order of sections that a research paper follows, so that a reader always finds the question, the method, the findings and their meaning in the same place. Most research papers are built on IMRaD (Introduction, Methods, Results and Discussion), with a title, abstract, literature review, conclusion and references added around that core. ## What is the order of a research paper? The order of a research paper is title, abstract, introduction, literature review, methods, results, discussion, conclusion, references, then appendices. The University of Westminster’s dissertation guide lists the same sequence for science and social science work, with a table of contents after the abstract ( University of Westminster ). - Title : names the topic and the key terms a reader would search for - Abstract : a short stand-alone summary of question, method, findings and conclusion - Introduction : background, the problem, the research question and why it matters - Literature review : what earlier studies found and where the gap is - Methods (or methodology): how the study was done, in enough detail to repeat it - Results (or findings): what the study found, without interpretation - Discussion : what the findings mean, compared with earlier work, with limitations - Conclusion : the main contribution, its implications and next questions - References : every source cited in the text Appendices (questionnaires, raw data, extra tables) come after the references. In APA Style the full page order is title page, abstract, text, references, footnotes, tables, figures, appendices, and APA notes that student papers generally leave out the abstract unless the instructor asks for one ( APA Style, order of pages, updated November 2024 ). ## How long should each section of a research paper be? Each section of a research paper takes a set share of the word count: introduction about 10%, literature review 20%, methods 15%, results 20%, discussion 25% and conclusion 10%. The title and abstract sit outside those shares. The table applies the shares to three common word limits. Section Share of word count 5,000-word paper 8,000-word paper 10,000-word paper Title Not counted No set limit No set limit No set limit Abstract Check your handbook Up to 250 words Up to 250 words Up to 250 words Introduction 10% 500 800 1,000 Literature review 20% 1,000 1,600 2,000 Methods 15% 750 1,200 1,500 Results 20% 1,000 1,600 2,000 Discussion 25% 1,250 2,000 2,500 Conclusion 10% 500 800 1,000 The shares come from published university guidance, which gives ranges rather than single numbers. The University of Hull’s dissertation guide, quoting the study skills author Bryan Greetham, puts the introduction at 5–10% of the word limit and each main chapter at 15–25%, and its own text puts the conclusion at about 5–10% ( University of Hull ). The University of Westminster puts the introduction at roughly 10% and the conclusion at 5–10% ( University of Westminster ). The two guides differ slightly on the introduction (Hull 5–10%, Westminster about 10%), so this table uses 10%, the figure both allow. The 250-word abstract figure is APA Style’s limit ( APA abstract and keywords guide ), and APA sets no maximum length for a title, only that the title should be focused and include key terms ( APA Style, title page ). A department handbook or supervisor overrides every number in the table. A qualitative study often has a longer discussion and a shorter results section; a literature-heavy topic can push the literature review past 20%. To split a different word limit chapter by chapter, use the free dissertation word count calculator , and to find a specific university’s limit, use the dissertation word limits lookup . The literature review on its own, by undergraduate, master’s and PhD level, is covered in how long a literature review should be . ## What does each section of a research paper do? Each section of a research paper answers one question for the reader: the introduction says what is being asked and why, the methods say how, the results say what was found, and the discussion says what the findings mean. The eight sections below each have a single job. ## What goes in the title of a research paper? A research paper title names the topic, the population or setting and, where possible, the method or main finding. APA Style sets no maximum title length but asks for a focused title that includes the key terms ( APA Style, title page ). Avoid empty openers such as “A Study of” or “An Investigation Into”, which add words without adding search terms. ## What goes in the abstract of a research paper? A research paper abstract is a stand-alone summary of the research question, method, key results and main conclusion, in that order. APA Style limits the abstract to 250 words and places it on the second page, straight after the title page ( APA abstract and keywords guide ). Write the abstract last, once every other section exists. The step-by-step version is in how to write an abstract . ## What goes in the introduction of a research paper? A research paper introduction moves from the broad context of the field to the specific problem, and ends with the research question, hypothesis or thesis statement . Picture an inverted triangle: wide at the top, narrow at the bottom. A full introduction covers five things: background, the problem statement, the purpose and objectives, the significance, and the scope. At about 10% of the word count, an 8,000-word paper has roughly 800 words for the introduction. See how to write a research paper introduction for a formula and examples. ## What goes in the literature review of a research paper? A research paper literature review is a critical synthesis of earlier studies, organised by theme or method, that shows how those studies relate and where the gap is that the paper fills. A literature review is not a list of summaries, one paper per paragraph. At about 20% of the word count, an 8,000-word paper has roughly 1,600 words for the literature review. In a journal article the literature review usually sits inside the introduction rather than under its own heading. The full method is in how to write a literature review . ## What goes in the methods section of a research paper? A research paper methods section explains how the study was done, in enough detail that another researcher could repeat it: design, participants or sources, data collection, analysis and ethics. Specific beats vague. “A survey was distributed” tells the reader nothing; a sentence in the form “a [number]-item Likert-scale survey was emailed to [number] [participants] at [institution] in [month, year]” tells the reader what to replicate. (That sentence is a format illustration with placeholders, not a real study.) See how to write a methodology section . ## What goes in the results section of a research paper? A research paper results section reports what the study found, using text, tables and figures, without interpreting the findings. Texas State University’s scientific writing guide says the results section is not the place to discuss why or how the experiment was done, or whether the results were expected ( Texas State University, Scientific Writing guide ). Organise results by research question or hypothesis, and refer to every table and figure in the text. Worked examples are in how to write a results section . ## What goes in the discussion section of a research paper? A research paper discussion interprets the results: whether the findings support the hypothesis, how the findings compare with earlier studies, what might explain unexpected results, the limitations, and the questions to ask next. Texas State University’s scientific writing guide adds that the discussion should tie the data back to the expectations raised in the introduction and keep facts apart from speculation. At about 25%, the discussion is usually the longest section. See how to write a discussion section . ## What goes in the conclusion of a research paper? A research paper conclusion states the main contribution, the practical or theoretical implications and the directions for future research, without new data. The University of Hull and the University of Westminster both put the conclusion at about 5–10% of the word count, so roughly 400 to 800 words in an 8,000-word paper. Templates are in how to write a conclusion for a research paper . ## What is the structure of a research article (IMRaD)? A published research article usually follows IMRaD: Introduction, Methods, Results and Discussion. The International Committee of Medical Journal Editors (ICMJE) describes IMRaD as the usual structure for original research articles and calls it “a reflection of the process of scientific discovery” rather than an arbitrary format, while noting that meta-analyses, case reports, narrative reviews and editorials may use other formats ( ICMJE Recommendations, preparing a manuscript ). IMRaD became the standard in the second half of the twentieth century. A survey of the BMJ, JAMA, The Lancet and the New England Journal of Medicine from 1935 to 1985 found IMRaD first used in the 1940s, in 80% of original papers by the 1970s, and the only pattern for original papers in the 1980s ( Sollaci and Pereira, 2004, Journal of the Medical Library Association, 92, 364–371 ). A research article has fewer headings than a student research paper because two sections fold into the IMRaD core. APA Style’s anatomy of a journal article lists title and author, abstract, introduction, method, results, discussion, tables and figures, and reference list, with no separate literature review or conclusion ( APA Style, anatomy of a journal article ). The literature review sits inside the introduction, and the conclusion sits at the end of the discussion. ## What sections does an academic paper have? An academic paper has six core sections (introduction, literature review, methods, results, discussion, conclusion) plus front and back matter that depends on the type of paper. The table shows which parts each type normally includes. Part Student research paper Journal research article Thesis or dissertation Title page Yes Yes Yes Abstract Only if requested (APA) Yes, often structured Yes Table of contents Rarely No Yes Introduction Yes Yes Yes, as a chapter Literature review Usually a separate section Inside the introduction Separate chapter Methods Yes Yes Separate chapter Results Yes Yes Separate chapter Discussion Yes Yes Separate chapter Conclusion Usually a separate section End of the discussion Separate chapter References Yes Yes Yes Appendices If needed Often online supplements If needed The sources for the table: APA Style says student papers generally do not include an abstract unless requested ( APA Style, order of pages ); the ICMJE says original research articles need structured abstracts ( ICMJE Recommendations ); and Cornell University’s Graduate School guide marks the title page, abstract and table of contents of a thesis or dissertation as required, with any appendices after the text and the references last ( Cornell Graduate School, required sections ). ## How does a research paper’s structure differ from a thesis or dissertation? A thesis or dissertation uses the same sections as a research paper, but each section becomes a full chapter, and the front matter grows to include a table of contents, acknowledgements and lists of figures and tables. Cornell’s Graduate School guide, for example, marks title page, copyright page, abstract, biographical sketch, acknowledgements and table of contents as required before the body of the text ( Cornell Graduate School ). The research paper shares of about 10% introduction, 20% literature review, 15% methods, 20% results, 25% discussion and 10% conclusion still work as a starting plan for thesis chapters. Many programmes ask for a proposal before the thesis, which plans the introduction, literature review and methods in a shorter form. For its sections, see how to write a research proposal . ## What is the difference between a thesis and a dissertation in the US? In the United States, a “thesis” usually means the research document for a master’s degree and a “dissertation” usually means the document for a PhD. Cornell University’s Graduate School, for instance, uses “master’s thesis” and “doctoral dissertation”, and sets different abstract formats for each ( Cornell Graduate School ). Other systems use the words differently: South Africa’s qualifications framework calls the master’s research document a dissertation or mini-dissertation, so check the wording in your own handbook. ## How is a research project structured in South Africa (honours and mini-dissertation)? In South Africa, an honours degree must include a research component of at least 30 credits, and a general master’s by coursework must include a research project of at least 60 credits that ends in a mini-dissertation or other forms of research, under the Higher Education Qualifications Sub-Framework ( HEQSF, revised January 2013 ). A master’s by research ends in a dissertation or another accepted form of research. At the University of Pretoria, the mini-dissertation in the MTh specialising in Dogmatics and Christian Ethics (coursework) carries 90 of the programme’s 180 credits ( University of Pretoria yearbook 2025 ). An honours research report and a mini-dissertation both follow the standard research paper order (introduction, literature review, methods, results, discussion, conclusion), scaled to the word limit. UNISA students can find chapter-level detail in the UNISA dissertation literature review guide . ## What order should you write a research paper in? Write a research paper in a different order from the one the reader sees: research question first, then methods, results, discussion, introduction and conclusion, with the title and abstract last. Texas State University’s scientific writing guide says the methods section “is almost always written first”, that many writers find the introduction easiest after drafting the methods, results and discussion, and that the abstract “should be the last thing that you write” ( Texas State University, Scientific Writing guide ). The University of Guelph’s guide agrees on the abstract: “Most scientists write the abstract last” ( University of Guelph, Guide to Writing Scientific Papers ). Steal this writing order: - Fix the research question or hypothesis, so you know what to read for. - Draft the literature review notes while you read, organised by theme. - Write the methods, while the details are fresh. - Write the results, section by section, matching each research question. - Write the discussion, linking each finding back to the literature review. - Write the introduction, now that you know what the paper shows. - Write the conclusion. - Write the title. - Write the abstract last. ## What are the most common research paper structure mistakes? Three common research paper structure mistakes are a literature review that only summarises, interpretation inside the results section, and an abstract written before the paper exists. - A literature review that lists instead of synthesises. A literature review built as “Author A found X. Author B found Y.” describes sources without comparing them. Group studies by theme and say where they agree, where they disagree and what is missing. How to synthesise sources in a literature review shows the difference. - Interpretation in the results section. Phrases such as “this suggests that” or “this is consistent with” belong in the discussion. Texas State University’s scientific writing guide tells students to point readers to the major patterns in the results “but do not interpret them”. - Writing the abstract first. An abstract summarises the question, method, results and conclusion, so an abstract written first describes a paper that does not exist yet. The Texas State University and University of Guelph writing guides both put the abstract last. ## How do you check each section of a research paper against your sources? To check each section of a research paper against your sources, put the papers you cited into one library, then test every claim in your draft against the passages in those papers. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Here is how a source check works for a research paper, section by section, using the steps on Litrevu’s how it works page: - Add your papers. Upload PDFs, paste a PDF link, a DOI or an arXiv link, paste a paper’s text, or pick open-access papers Litrevu finds on your topic. - Literature review: ask the papers. Ask “what do these studies say about [your question]?” Litrevu answers with citations from your papers only, and says when your papers do not cover the question. - Literature review and discussion: compare papers. Line studies up side by side in a cited table to see where findings agree and differ before you write the synthesis or compare your results with earlier work. - Any section: check your own paragraph. Paste a paragraph you wrote. Each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. - Open the citation. Each citation opens the highlighted passage on the PDF page it came from, so you read the source yourself before you keep the claim. - References: cite and export. Switch between APA, MLA, Chicago, IEEE, Harvard and Vancouver, and export to Word or PDF, with references to BibTeX or RIS. A check result looks like this (a format illustration with placeholders, not real output): Claim from your paragraph Result Passage [Claim 1 from your discussion] Supported (Author, Year), highlighted passage [Claim 2 from your discussion] Partly supported (Author, Year), highlighted passage [Claim 3 from your discussion] Not in your papers None in your library “Not in your papers” means your library does not cover that claim; it is a prompt to find a source or cut the claim, not proof that no study exists. You decide what to argue and you write every section. Many universities set rules on AI use, so check your institution’s policy and declare how you used AI; the free AI disclosure statement generator gives you wording. ## Frequently asked questions about research paper structure ## What is the order of a research paper? The order of a research paper is title, abstract, introduction, literature review, methods, results, discussion, conclusion, references and appendices. In APA Style the page order is title page, abstract, text, references, footnotes, tables, figures, appendices, and student papers usually skip the abstract unless the instructor asks for one. ## What is the structure of a research paper? The structure of a research paper is the IMRaD core (Introduction, Methods, Results, Discussion) with a title, abstract, literature review, conclusion and references added around it. A typical split of the word count is introduction 10%, literature review 20%, methods 15%, results 20%, discussion 25% and conclusion 10%. ## What are the sections of a research paper? A research paper has eight main sections: title, abstract, introduction, literature review, methods, results, discussion and conclusion, followed by references and any appendices. A journal article usually merges the literature review into the introduction and the conclusion into the discussion. ## What is IMRaD? IMRaD stands for Introduction, Methods, Results and Discussion, the standard structure for original research articles. The ICMJE describes IMRaD as a reflection of the process of scientific discovery. A survey of four major medical journals found IMRaD in 80% of original papers by the 1970s and as the only pattern by the 1980s (Sollaci and Pereira, 2004). ## How long should each section of a research paper be? For an 8,000-word research paper, plan about 800 words for the introduction, 1,600 for the literature review, 1,200 for the methods, 1,600 for the results, 2,000 for the discussion and 800 for the conclusion. These shares follow University of Hull and University of Westminster guidance, and a department handbook overrides them. ## How does a research paper's structure differ from a thesis? A thesis uses the same sections as a research paper, but each section becomes a full chapter and the front matter adds a table of contents, acknowledgements and lists of figures and tables. In the US a master's research document is usually called a thesis and a PhD document a dissertation. ## Does a student research paper need an abstract? A student research paper usually does not need an abstract in APA Style: APA says student papers generally do not include one unless the instructor requests it. When an abstract is required, APA limits it to 250 words on the second page. ## Where do you start your next research paper? Start your next research paper with the research question and the papers you plan to cite, then write the methods and results first and the abstract last, and check each section’s claims against those papers before you hand in. If you want your papers in one place, with every answer cited to the passage it came from, try Litrevu with your own papers . Free to start, no credit card required. ## Related Guides - How to Start a Research Paper (When You Have No Idea Where to Begin) - How to Write a Research Paper Introduction (Formula + Examples) - How to Write a Literature Review (Step-by-Step Guide for 2026) - How Long Should a Literature Review Be? --- # How to Write a Research Proposal: 7 Sections + Template URL: https://litrevu.com/blog/how-to-write-a-research-proposal Category: Getting Started Published: 2026-04-19 Summary: A research proposal sets out your question, the gap, your method and a timeline. See the 7 sections in order, what goes in each, and a template to copy. Guides ## How to Write a Research Proposal: 7 Sections + Template By Jessica McLaren · 19 April 2026 · 15 min read · Updated 26 October 2026 A research proposal is a short document that sets out what you will study, why it matters and how you will do it, so that a supervisor, committee or funder can approve the project before you start. Most proposals follow seven sections in this order: title, introduction, literature review, aims and research questions, methodology, timeline and references, and a UK PhD application proposal is usually 2,000 to 3,000 words ( King’s College London , University of Warwick Sociology ). Research proposal, defined: a research proposal is a plan for a study that has not happened yet. It names the problem, shows what earlier research has and has not covered, states the research questions, and explains the method and timeline you will use to answer them. The University of Southern California’s library guide puts the goal in two parts: “to present and justify the need to study a research problem and to present the practical ways in which the proposed study should be conducted” ( USC Libraries ). Everything below serves one of those two jobs. Section What goes in Typical length (Warwick Sociology PhD guide) 1. Title The topic and its context No length given 2. Introduction Background, the problem, why it matters, the contribution About 200 to 300 words 3. Literature review What existing research says, how it fits together, where your study sits About 500 to 600 words 4. Aims and research questions Clear aims and a coherent set of questions grounded in the literature 400 to 500 words 5. Methodology Approach, methods, sampling or access, ethics, analysis plan 500 to 600 words 6. Timeline Phases of the project across the registration period Brief 7. References Every source cited, in your required style Not counted in the word limit The word ranges come from the University of Warwick Department of Sociology , which asks for “around 2,000-3,000 words, although this is only a guideline” and also wants a short conclusion of about 200 words. Your own department’s figures always win over these. ## What are the 7 parts of a research proposal? The 7 parts of a research proposal are the title, the introduction, the literature review, the aims and research questions, the methodology, the timeline and the references. University guides name and order these parts slightly differently: all the guides checked for this page ask for research questions and a method, and most give the literature review a section of its own. Here is what goes in each part. ## 1. Title A research proposal title names the topic and its context. Warwick Sociology asks for a title that gives “a clear indication of the topic and context”. A weak title: “A Study of Social Media.” A stronger title: “Instagram Use and Body Image Among Female University Students in South Africa.” The stronger title names the variable, the population and the setting. Your proposal title can change as the project develops, so a working title is fine at this stage. ## 2. Introduction and problem statement The introduction of a research proposal names the research problem and explains why the problem matters. The USC Libraries guide lists four questions an introduction should answer: what the central research problem is, what topic of study relates to that problem, what methods should be used to analyse it, and “So What?”, meaning why the research is significant. Start with the general area, narrow to the specific problem, and say plainly what is not yet known. Our guide to writing a problem statement walks through that paragraph, and the guide to writing a research rationale covers the “why this study” argument. ## 3. Literature review The literature review in a research proposal shows what existing studies have found, how those studies fit together, and where your project sits. Warwick Sociology asks applicants to show they understand how sources form an ongoing debate, and to end the section by saying how the proposed study sits within, and extends, existing research. Organise the proposal literature review by theme, not by publication date. A proposal literature review is shorter than a thesis chapter; the dedicated guide to the literature review for a research proposal covers length, structure and how to state the gap without overclaiming. ## 4. Aims, objectives and research questions The aims and research questions say exactly what the study will find out. Warwick Sociology asks for questions grounded in the rationale from the literature review, a coherent set of questions rather than questions pulling in different directions, and a project one person can finish within the degree. Some guides fold the aims into the introduction (the King’s College London European and International Studies guide puts “Central research question and objectives” second, straight after the title). For wording, see how to write a research question and how to write research aims and objectives . ## 5. Methodology The methodology section of a research proposal explains how the study will answer each research question, and why that method suits the question. The USC Libraries guide says “the methodology is not just a list of tasks; it is a deliberate argument”, and asks you to anticipate barriers and pitfalls and say how you would deal with them. Cover the research design, the data collection method, sampling or access, ethical issues and the analysis plan. A research proposal describes a study that has not happened yet, so the methodology is written in the future tense (“I will interview…”). The methodology section guide has worked examples of justifying each choice. ## 6. Timeline (and budget, where asked) The timeline of a research proposal shows that the project fits the time available. Warwick Sociology asks for a brief timeline covering the period of the doctoral degree; the University of Kansas journalism school asks master’s students for a 1 to 2 page plan running from proposal approval to the thesis defence. Break the project into phases (ethics approval, data collection, analysis, writing, revision) and give each one a date range. A budget section is only needed when a funder or programme asks for one; when one is needed, list each item (software, transcription, travel, participant incentives) with its cost and source. ## 7. References The reference list of a research proposal includes every source cited in the proposal, in the citation style your department requires. Warwick Sociology says the list of cited references “is not included in the word count”, and the KCL guide gives its length as “2,000-3,000 words long, plus bibliography”. Use one style consistently. Our guide to citing sources in a research paper covers the main styles, and the free reference checker flags references that may not exist. ## How long is a research proposal? A research proposal has no universal length: UK PhD application proposals cluster at 2,000 to 3,000 words, while US thesis and dissertation proposals are measured in pages, from about 10 to 35 pages in the USC Libraries guide up to 30 to 45 pages for one US master’s programme. Always use your own department’s figure, because departments inside the same university set different limits. Institution and programme Country Proposal length King's College London, European and International Studies (PhD) UK 2,000 to 3,000 words, plus bibliography University of Warwick, Sociology (PhD) UK Around 2,000 to 3,000 words (a guideline); references not counted University of Sussex, Faculty of Social Sciences (PhD) UK 3,000 words, not including references University of Sussex, Faculty of Media, Arts and Humanities (PhD) UK 2,000 words University of Sussex, Faculty of Science, Engineering and Medicine (PhD) UK 1,000 to 2,000 words University of Sussex, Institute of Development Studies (PhD) UK 2,000 to 3,500 words, excluding bibliography University of York, Computer Science (PhD) UK About 500 to 1,000 words University of York, Management PhD UK Around 4,000 words USC Libraries research guide (general) US Text of 10 to 35 pages, plus references University of Kansas, Journalism and Mass Communications (master's thesis) US About 30 to 45 pages, plus references Sources: KCL , Warwick , Sussex , York , USC Libraries , University of Kansas , all read in October 2026. The University of York says outright that each department “has different requirements”, and its own figures run from a few hundred words to about 4,000. If your guide only gives a total, the free dissertation word count calculator at the end of this guide splits a total word limit across sections. ## What is the format of a research proposal? The format of a research proposal is a titled document with numbered headings for each part, in the order your department sets, followed by a reference list. The headings change between universities: USC Libraries lists seven parts (introduction, background and significance, literature review, research design and methods, preliminary suppositions and implications, conclusion, citations), while the University of Wollongong in Australia lists eleven, adding a table of contents, significance and expected outcomes. Three format rules hold across the guides checked for this page: - Use the department’s headings, in the department’s order. The University of Wollongong says the sections you need, and their order, depend on the scope of your research and your discipline, and tells you to check with your school or faculty. - Put the references after the main text. Warwick, KCL and USC all place the reference list last and keep it outside the length limit. - Add a title page if the template asks for one. Put the working title, your name, your supervisor’s name, the department, the date and the word count on the title page. Sussex shows how far format can vary inside one university: its Business School asks for “up to six pages (plus references)” with a thesis statement and ethical considerations, while its Faculty of Media, Arts and Humanities asks for 2,000 words with a “Research contribution” section ( University of Sussex ). ## How do you write a research proposal step by step? Write a research proposal by reading your department’s guidelines first, then the literature, then writing the questions, the method and the timeline, and writing the introduction last. Warwick Sociology asks for research questions grounded in the rationale from the literature review, so the reading has to come before the questions are fixed. - Read the brief. Note the word or page limit, the required headings, the citation style and the deadline. - Collect and read the key papers. Group the papers by theme and note where findings agree or conflict. The free literature review matrix gives you a grid to fill in. - Find the gap. Look for populations, settings, methods or questions the papers leave open. See how to find a research gap , and check whether your research question has already been answered . - Write the aims and research questions. Keep them answerable by one person in the time you have. - Plan the methodology. Justify each choice against a research question, and name the ethical issues. - Draw up the timeline. At the University of Kansas journalism school, the committee must approve the proposal “before the start of primary data collection”, so leave room for approval in the plan. - Write the introduction and title last. The introduction is easier to write once you know exactly what the study will do. - Check every claim and reference. Reread each source behind a claim about the literature, and format the reference list in one style. ## What mistakes get a research proposal sent back? The mistakes that get a research proposal sent back are usually a vague question, a missing gap, a method with no justification and careless writing. The USC Libraries guide lists six common mistakes: “Failure to be concise”, “Failure to cite landmark works in your literature review”, “Failure to delimit the contextual scope of your research”, “Failure to develop a coherent and persuasive argument for the proposed research”, “Sloppy or imprecise writing, or poor grammar”, and “Too much detail on minor issues, but not enough detail on major issues”. What those mistakes look like in practice: - A topic instead of a question. “How does technology affect education?” is a topic. A research question names the population, the setting and what will be measured or explored. - No clear gap. If the literature review does not end on something the existing studies leave open, the proposal has no reason to exist. Warwick Sociology asks for the literature review to end by saying how the study extends existing research. - An unrealistic scope. Warwick Sociology asks for a project one person can complete within the PhD period. A smaller study that can be finished beats a large one that cannot. - A method without a reason. “I will use semi-structured interviews” needs a “because” tied to the research question; USC calls the methodology “a deliberate argument”. - Sloppy references. USC lists sloppy or imprecise writing among its six mistakes, and inconsistent citation styles or missing entries are the easiest version of that mistake to fix before submission. ## What does a research proposal look like? (template to copy) A research proposal looks like a short, headed document: a title page, five or six numbered sections of prose, a simple timeline table and a reference list. Steal this outline and swap in your department’s headings and word limits; the word guides shown are the Warwick Sociology PhD figures for a proposal of about 2,000 to 3,000 words. Research proposal outline - Title page. Working title, your name, supervisor, department, date and word count. - Introduction (about 200 to 300 words). Background, the research problem, why it matters, and the contribution you expect to make. - Literature review (about 500 to 600 words). Themes in the existing research, how the studies fit together, and the gap your study addresses. - Aims and research questions (400 to 500 words). The aims, then two to four research questions, each with a sentence on what it asks and why. - Methodology (500 to 600 words). Design, data collection, sampling or access, ethics and the analysis plan, each justified against a research question. - Conclusion (about 200 words, if your guide asks for one). How the study will make its contribution. - Timeline. A table of phases, from approval to final submission. - References. Every cited source in your required style, outside the word count. A simple timeline table can look like this (a format illustration, so set your own months): Phase Months Ethics approval 1 to 2 Data collection 3 to 6 Analysis 7 to 9 Writing and revision 10 to 12 ## What does a research proposal need in the US? In the US, a master’s student usually writes a thesis proposal and a PhD student writes a dissertation proposal, and at both programmes below a committee reviews the proposal before the research goes ahead. At the University of Connecticut Management PhD, the proposal sets out the focal research questions, “a review of the literature to be built upon”, the data to be collected and the methods; the student presents it to the department, and “A complete written proposal must be distributed to committee members at least two weeks prior to the presentation”. At the University of Kansas journalism school, the committee approves the master’s thesis proposal before primary data collection, and the proposal runs to about 30 to 45 pages plus references: an introduction of 5 to 10 pages, a literature review of 20 to 25 pages, a methodology of 5 to 10 pages and a 1 to 2 page plan of action. The general USC Libraries guide puts the text of proposals at 10 to 35 pages. US proposals are counted in pages, so check your graduate school’s formatting rules (spacing, margins, font) alongside the page limit. ## What does a research proposal need in the UK? In the UK, a research proposal is most often written to apply for a PhD place, and the usual length is 2,000 to 3,000 words plus references. King’s College London European and International Studies and Warwick Sociology both use the 2,000 to 3,000 word range, while Sussex sets limits by faculty, from 1,000 to 2,000 words in Science, Engineering and Medicine to 3,000 words in Social Sciences. UK proposal guides often give ethics and anticipated problems their own headings: Sussex’s Business School, Social Sciences, Science and IDS guides all list “Ethical considerations” as a separate heading, and KCL asks for a “Problems” section on anticipated difficulties. For an undergraduate or taught master’s dissertation proposal, the module handbook sets the length and headings, and it overrides the PhD figures above. ## How is a research proposal structured in the Philippines? In the Philippines, a research proposal can be organised as numbered chapters, as in the example below, where the review of related literature (RRL) is Chapter II. A research proposal rubric posted on the University of the Philippines Manila learning site ( vle.upm.edu.ph ) scores four chapters: “Chapter I. Introduction”, “Chapter II. Review of Related Literature”, “Chapter III Study Framework” and “Chapter IV. Methodology”, 20 points each. The same rubric says “A good RRL builds on the context introduced in Chapter I” and scores the RRL on synthesis of “themes and gaps”. Chapter division is not fixed nationally: for the thesis itself, the Asian Center, University of the Philippines Diliman says there is no standard format for dividing the contents into chapters and that the student should confer with the adviser, so check whether your programme wants three chapters or four before you start. ## How do I use an AI assistant for writing backed by sources on my research proposal? An AI assistant for writing backed by sources helps with the parts of a research proposal that depend on your reading: the literature review, the gap and the claims in the introduction. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Here is the proposal workflow on your own papers, using the steps on Litrevu’s how it works page: - Add the papers behind your proposal. Upload the PDFs you are reading, paste a PDF link, a DOI or an arXiv link, or let Litrevu find open-access papers on your topic and pick the ones you want. - Ask the papers your proposal questions. For example: “Which populations have these studies covered?” or “Which methods did they use?” Answers are cited only from your papers, and Litrevu says when your papers do not cover a question. - Open every citation. Each citation opens the highlighted passage on the PDF page it came from, so you read the source before you rely on it. - Compare the key studies in a table. Line the studies up side by side (population, setting, method, finding) with citations, and see where they agree and differ. Rows where findings conflict, or where no paper covers a population, are candidates for your gap. - Check your own paragraphs. Paste the problem statement or the gap paragraph you wrote. Each claim comes back Supported, Partly supported, Contradicted or Not in your papers. - Cite and export. Switch between APA, MLA, Chicago, IEEE, Harvard and Vancouver, and export your references to BibTeX or RIS. A claim check result looks like this (a format illustration, not real output): “No study has examined this question in rural schools (Author, Year; Author, Year).” Not in your papers “Not in your papers” means your library does not cover the claim. It is a cue to search wider, not proof that a gap exists in the literature. You decide which gap is real, you write the proposal, and you declare how you used AI where your university asks. Check your department’s rule first: some rule AI out for the proposal itself, and Warwick Sociology expects the proposal and application materials “to be your own original writing and not produced with assistance from Gen AI”. The ethics of AI in research writing guide and the free AI disclosure statement generator help with that step. ## Frequently asked questions ## What are the 7 parts of a research proposal? The 7 parts of a research proposal are the title, introduction, literature review, aims and research questions, methodology, timeline and references. Some universities add a conclusion, a significance section or a budget, and some put the research questions before the literature review. Use the headings and order in your own department's guide. ## What is the format or layout of a research proposal? A research proposal is laid out as a title page, numbered sections for each part in the order your department sets, and a reference list at the end. The University of Southern California's library guide lists seven parts and the University of Wollongong lists eleven, so the department template decides the exact headings. ## What does a research proposal look like? A research proposal looks like a short headed report: a title page, five or six sections of prose (introduction, literature review, aims and questions, methodology, conclusion), a timeline table and references. A UK PhD application proposal is usually 2,000 to 3,000 words; a US thesis proposal is usually measured in pages. ## How do you structure a research proposal? Structure a research proposal so each section leads to the next: the introduction names the problem, the literature review shows what is known and what is missing, the research questions target that gap, and the methodology explains how each question will be answered. The timeline and references close the proposal. ## How long is a research proposal? A UK PhD research proposal is usually 2,000 to 3,000 words plus references, the range King's College London and the University of Warwick Sociology department both use. US thesis and dissertation proposals are counted in pages, from about 10 to 35 pages in the USC Libraries guide up to 30 to 45 pages for the University of Kansas journalism master's thesis. ## Is there a research proposal template or outline? Yes. A standard research proposal outline is: title page, introduction, literature review, aims and research questions, methodology, an optional conclusion, timeline and references. Replace the headings and word limits with the ones in your department's guide before you start writing. ## Where do I start on my research proposal? Start a research proposal with the papers: the literature review, the gap and the research questions all depend on what those papers say. Add the papers you are reading to Litrevu, ask them where they agree and what they leave open, and open every citation to the passage before you use it. The thinking and the writing stay yours. Add your papers . Free to start, no credit card required. ## Related Guides - How to Write a Literature Review for a Research Proposal (2026 Guide) - How to Use AI to Find a Research Gap in Your Own Papers - How to Write a Research Question (Step-by-Step, With Examples) - How to Write a Methodology Section (Complete Guide with Examples) --- # How to Write a Research Paper Introduction (The Inverted Triangle Method) URL: https://litrevu.com/blog/how-to-write-a-research-paper-introduction Category: Writing Sections Published: 2026-04-19 Summary: Step-by-step guide to writing a research paper introduction. Covers the 5 essential components, the inverted triangle structure, and common mistakes. Guides ## How to Write a Research Paper Introduction (Formula + Examples) By Jessica McLaren · 19 April 2026 · 9 min read Your introduction is the first thing your reader sees, and the last thing you should write. Here's the exact formula that turns a blank page into a compelling opening. The introduction is arguably the most important section of your research paper. It's the first impression. It's where your reader decides whether your paper is worth their time. And yet, most students treat it like an afterthought. They slap together a few vague sentences about how their topic is “important” and “relevant,” toss in a research question, and move on. That's a missed opportunity. A strong introduction does four things: it hooks the reader, establishes context, identifies the gap, and presents your thesis. If it does all four, your reader knows exactly what to expect and why they should care. In this guide, I'll break down the exact structure, components, and process for writing a research paper introduction that actually works. No filler. No academic jargon. Just the formula you need. (Not sure where the introduction fits in the bigger picture? Start with our guide on research paper structure first.) ## What Does a Research Paper Introduction Actually Do? Think of your introduction as a contract with the reader. In exchange for their attention, you promise to answer a specific question in a specific way. The introduction spells out that contract. Every effective introduction delivers four things: - Hook , an opening that grabs attention and signals why this topic matters right now. - Context , enough background for a reader outside your niche to follow along. - Gap , the unanswered question, unresolved tension, or missing piece in existing research. - Thesis / Research Question , your precise response to that gap, stated clearly and unmistakably. If your introduction covers these four elements, the reader enters the rest of your paper with a clear mental map. If it doesn't, they're lost before the literature review even begins. Pro tip: write your Introduction second-to-last The best time to write your introduction is after you've finished your methodology, results, and discussion , but before the abstract. At that point you know exactly what your paper says, what your findings are, and what argument you're making. The ideal writing order is: Methodology → Results → Discussion → Conclusion → Introduction → Abstract. For a deeper look, see our guide on how to start a research paper . ## The Inverted Triangle: Broad to Narrow to Your Contribution Almost every strong research paper introduction follows the same shape, sometimes called the “inverted triangle” or “funnel” approach. You start wide and narrow down until the reader lands on your specific study. The inverted triangle structure: Layer 1, Broad context. Introduce the general topic area. Give the reader enough background to understand the landscape. Layer 2, Narrowing down. Zoom into the specific issue, gap, or tension your research addresses. Layer 3, Your contribution. State your research question, objectives, and scope. This is the pointy end of the triangle. This structure works because it mirrors how people naturally process new information. You give them the big picture first, then zoom in. By the time they reach your research question, they already understand why it needs to be asked. Struggling with how to start a research paper at all? The funnel gives you a built-in starting point: begin with the broadest true statement you can make about your field, then keep narrowing. ## The 5 Essential Components of a Research Paper Introduction Let's get granular. Every solid introduction contains these five components. They don't need rigid subheadings , they should flow naturally, but every one needs to be there. ## 1. Opening Hook Your first sentence needs to earn the second. A striking statistic, a provocative question, or a real-world consequence all work. What doesn't work: “Since the dawn of time…” or “Technology is changing rapidly.” Those are noise. Good example: “Remote workers are 67% more likely to report burnout symptoms than their in-office counterparts, yet most companies still design wellness programs around a physical workplace.” ## 2. Background Context This is the top of your funnel. Set the scene with a brief overview of the topic area: what's happening in the field, what the key concepts are, and why people care. Two to four sentences is usually enough. You're not writing a textbook chapter, just enough for an outsider to follow along. ## 3. Problem Statement This is the engine of your entire paper. Identify what's missing, unresolved, or contradictory in the existing research. Be specific. “Little research has been done on X” is weak. “While studies have examined burnout in healthcare workers (Smith, 2021) and teachers (Jones, 2022), remote tech workers remain under-explored despite reporting some of the highest attrition rates in the industry” is much stronger. Need help building the case for your gap? That's exactly what the literature review section does in depth. ## 4. Research Objectives State your research question clearly and directly. Don't bury it in the middle of a paragraph. Put it front and center. Good phrasing: “This study investigates the relationship between remote work policies and burnout indicators among software developers at mid-sized tech companies.” If you have specific objectives or hypotheses, list them here. Numbered lists work well, they're easy to scan and easy to reference later. For crafting that core claim, see our guide on how to write a thesis statement . ## 5. Scope and Significance Answer the “so what?” question. Why should anyone care about your findings? Then define what your study covers and what it deliberately leaves out. Delimitations are not weaknesses, they're conscious decisions about focus that show intellectual rigor. Example: “This study focuses on full-time software developers at companies with 50 to 500 employees in the United States. It does not address freelancers, contractors, or developers in hybrid arrangements.” ## Annotated Example: A Research Paper Introduction Paragraph Below is a condensed example introduction with inline annotations so you can see each component in action. [Hook] Employee burnout costs U.S. employers an estimated $190 billion in healthcare spending each year (Garton, 2017). [Context] Since the shift to remote work accelerated in 2020, a growing body of research has examined how work-from-home arrangements affect employee wellbeing, with studies reporting both increased autonomy and heightened feelings of isolation (Golden & Gajendran, 2019; Wang et al., 2021). [Gap] However, most existing studies focus on healthcare professionals and educators; remote software developers , a population reporting some of the highest voluntary turnover rates in the labor market, remain largely under-examined. [Objectives] This study investigates the relationship between remote work policies and burnout indicators among software developers at mid-sized U.S. tech companies, using a mixed-methods design combining survey data (n = 420) with semi-structured interviews. [Scope] Findings contribute to the growing literature on occupational health in distributed teams and provide actionable recommendations for HR leaders designing remote work wellness programs. Notice how each component flows into the next. There are no awkward transitions or redundant sentences. The reader moves from “burnout is expensive” to “here is exactly what we studied” in a single paragraph. Build your introduction on your own sources Upload your reference papers and ask what is already known and what is still open, with every answer linked to the passage it came from. Free to start, no credit card. Try Litrevu free ## How Long Should a Research Paper Introduction Be? A reliable rule of thumb: aim for 8–10% of your total paper length. That keeps the introduction substantial enough to set up the study without stealing space from the sections that do the heavy lifting. Course paper (3,000–5,000 words) 250–500 words Research paper (5,000–8,000 words) 400–800 words Master's thesis (15,000–25,000 words) 1,200–2,500 words PhD dissertation (40,000+ words) 3,000–4,000 words Don't obsess over hitting an exact number. The real test is whether your introduction does its job: does the reader understand the context, the problem, your question, and why it matters? If yes, the length is fine. If your introduction is longer than 15% of the total paper, you're probably including material that belongs in the literature review . ## 6 Common Mistakes That Sink an Otherwise Good Introduction ## 1. Opening too broadly “Since the beginning of time, humans have been interested in technology.” This tells the reader nothing. Start at the level of your discipline, not the history of civilization. Your opening should be broad enough to orient but narrow enough to signal exactly which field you're in. ## 2. No thesis or research question If a reader finishes your introduction and still doesn't know what question you're answering, the introduction failed. State it explicitly. Consider giving it its own sentence or short paragraph so it's impossible to miss. Our thesis statement guide walks through exactly how to craft one. ## 3. Too much detail upfront If you're citing more than 5–8 sources in the introduction, you're drifting into literature review territory. The introduction establishes the gap; the literature review proves it with evidence. ## 4. Previewing results The introduction sets up the question. It does not answer it. Don't preview your findings or conclusions here , that's what your results and discussion sections are for. ## 5. Vague significance claims “This topic is very important and relevant in today's world.” Says who? Be specific about what makes your study significant. Vague importance claims are filler text disguised as substance. ## 6. No bridge to the next section Your introduction should end by naturally leading into whatever comes next, usually the literature review or methodology. One sentence is enough: “The following section reviews existing literature on X to further contextualize this study.” ## Ground Your Introduction in Your Sources An introduction moves from what is known, to what is still open, to your question. Litrevu helps with the first two: ask the papers you upload what they established and what they leave unresolved, and see the passage behind every answer. No credit card required. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Once you have written your introduction, paste it in and see which of its claims your papers back. The argument and the writing stay yours; Litrevu helps you check them. Try it now, it's free ## Related Guides - How to Write a Literature Review (Step-by-Step Guide for 2026) - How to Write a Thesis Statement (Examples That Actually Work) - Research Paper Structure: The Complete Guide for Students - Litrevu for Research Papers --- # How to Write a Methodology Section (Complete Guide with Examples) URL: https://litrevu.com/blog/how-to-write-a-methodology-section Category: Writing Sections Published: 2026-04-19 Summary: Everything you need to write a methodology section your supervisor will approve. Research design, data collection, analysis, ethics, templates, and common mistakes. Guides ## How to Write a Methodology Section (Complete Guide with Examples) By Samuel de Bruyn · 19 April 2026 · 11 min read Everything you need to write a methodology section your supervisor will approve. Research design, data collection, analysis, ethics, templates, and the mistakes to avoid. The methodology section is the part of your thesis or research paper where you explain exactly how you did your study. What approach you used, how you collected data, how you analyzed it, and why you made those choices. Sounds straightforward, right? In theory, yes. In practice, students get stuck on the methodology section more than almost any other part of their paper. Not because the concepts are hard, but because nobody teaches you how to actually write one. Your supervisor says “write your methodology chapter” and you're left wondering: How detailed should I be? Do I justify every choice? What order do I put things in? How long should it be? This guide answers all of that. By the end, you'll know exactly what goes into a methodology section, how to structure it, and how to write each component. I've also included templates for qualitative, quantitative, and mixed methods research so you can see what the finished product looks like. (If you're still working on earlier sections, check out our guides on how to write a literature review and research paper structure . The methodology comes after both.) ## What Is a Methodology Section? A methodology section tells your reader how you conducted your research. It covers your research design, data collection methods, analysis approach, and any ethical considerations. The goal is to give enough detail that another researcher could replicate your study. That replicability part is key. Your methodology is not a diary entry about what happened. It is a precise description of what you did and why you did it. Every choice needs a justification. Think of it this way: your introduction says what you are studying and why. Your methodology says how. Your results say what you found. Without a clear methodology, your results have no credibility. A reader cannot trust your findings if they do not understand how you arrived at them. The methodology section answers four questions: - What did you do? (research design and approach) - How did you do it? (data collection and procedures) - Who or what did you study? (sampling and participants) - Why did you make these choices? (justification) If your methodology section answers all four clearly, you are in good shape. If it skips the “why,” your supervisor will send it back. ## Qualitative vs Quantitative vs Mixed Methods Your research design is the foundation of your entire methodology section. Choosing the right one depends on your research question, not your personal preference. ## Qualitative Research Qualitative research explores experiences, meanings, and perspectives. It produces non-numerical data: interview transcripts, field notes, documents, images. Use it when: You want to understand the “how” or “why” behind a phenomenon. Your research question starts with words like “explore,” “understand,” or “describe.” There is limited existing research on the topic. Common methods: Semi-structured interviews, focus groups, ethnography, case studies, document analysis. Analysis approaches: Thematic analysis (most common), grounded theory, content analysis, narrative analysis, interpretive phenomenological analysis (IPA). ## Quantitative Research Quantitative research measures variables and tests hypotheses using numerical data and statistical analysis. It produces numbers: survey scores, test results, measurements. Use it when: You want to measure something, test a relationship between variables, or generalize findings to a larger population. Your research question asks “how much,” “how many,” or “what is the relationship between.” Common methods: Surveys with closed-ended questions, experiments, quasi-experiments, secondary data analysis. Analysis approaches: Descriptive statistics, t-tests, ANOVA, regression analysis, correlation, chi-square tests, structural equation modeling. ## Mixed Methods Research Mixed methods combines qualitative and quantitative approaches in a single study. This gives you both the depth of qualitative data and the breadth of quantitative data. Use it when: One method alone cannot fully answer your research question. You want to validate qualitative findings with quantitative data (or vice versa). Your research involves a complex problem that benefits from multiple perspectives. Common designs: Sequential explanatory (quantitative first, then qualitative to explain results), sequential exploratory (qualitative first, then quantitative to test findings), and convergent (both collected simultaneously and compared). Quick decision guide: If your research question asks “what” or “how much,” go quantitative. If it asks “how” or “why,” go qualitative. If it asks both, consider mixed methods. When in doubt, check what methods recent papers in your field have used for similar questions. ## The 5 Subsections Every Methodology Needs Every methodology section, regardless of discipline or research type, covers the same core components. The depth and emphasis will vary depending on your study, but the building blocks are the same. ## 1. Research Design This is the big-picture overview of your approach. Are you doing qualitative, quantitative, or mixed methods research? Is it experimental, correlational, descriptive, or exploratory? Is your study cross-sectional or longitudinal? State your design clearly in the first paragraph, then explain why it is appropriate for your research question. This is where you connect your methodology to your research objectives. Example: “This study employed a qualitative exploratory design to investigate how first-generation college students experience the admissions process. An exploratory approach was chosen because limited prior research exists on this specific population, making hypothesis testing premature (Creswell, 2018).” ## 2. Data Collection Methods Describe exactly how you gathered your data. If you used surveys, describe the survey instrument, the number of questions, the response scale, and how it was distributed. If you conducted interviews, explain the format (structured, semi-structured, unstructured), how long they lasted, and where they took place. If you used existing datasets, describe the source, the variables you extracted, and the time period covered. Be specific. “I collected data using a survey” is not enough. Compare these two versions: Too vague: “Data were collected using an online survey.” Specific enough: “Data were collected using a 32-item Likert-scale survey administered online via Qualtrics over a four-week period (March 1 – March 28, 2024). The survey comprised three sections: demographics (8 items), learning engagement (14 items), and self-efficacy (10 items).” ## 3. Sampling Strategy Who or what did you study, and how did you select them? Describe your target population, your sampling method (random, stratified, purposive, convenience, snowball), your sample size, and your inclusion and exclusion criteria. If your sample size is small, justify it. For qualitative research, you can reference data saturation. For quantitative research, you should include a power analysis or cite sample size guidelines for your statistical method. Common sampling methods at a glance: - Random sampling: Every member of the population has an equal chance of selection. Gold standard for quantitative studies. - Purposive sampling: Participants selected based on specific criteria. Common in qualitative research. - Convenience sampling: Participants selected based on availability. Easy but introduces bias. Acknowledge this in your limitations. - Snowball sampling: Existing participants recruit future participants. Useful for hard-to-reach populations. ## 4. Data Analysis Explain how you processed and analyzed your data. For quantitative studies, describe the statistical tests you used (t-tests, ANOVA, regression, chi-square) and the software (SPSS, R, Stata, Python). For qualitative studies, describe your analysis method (thematic analysis, grounded theory, content analysis, discourse analysis) and the coding process. Do not just name the method. Explain the steps. For thematic analysis, describe how you coded the data, how you identified themes, and how you refined them. For regression analysis, state your dependent and independent variables, any control variables, and how you checked assumptions. Example (qualitative): “Interview transcripts were analyzed using Braun and Clarke's (2006) six-phase thematic analysis. Initial codes were created line-by-line, then grouped into candidate themes. Themes were reviewed against the coded extracts and the full dataset, refined, and named. NVivo 14 was used to manage the coding process. A second researcher independently coded 20% of the transcripts, yielding an inter-rater agreement of 87%.” ## 5. Limitations and Ethical Considerations If your research involves human participants, you need to address ethics. At minimum, cover informed consent, anonymity and confidentiality, data storage and protection, and ethics board approval (IRB or equivalent). Even if your research does not involve human subjects, include a brief statement explaining why ethical approval was not required. Every methodology has limitations, and your supervisor knows this. Acknowledging them does not weaken your paper, it strengthens it. Common limitations include small sample size, convenience sampling, self-reported data, geographic constraints, and time limitations. State each limitation, explain how it might affect your results, and describe what you did to mitigate it. Some supervisors prefer limitations at the end of the methodology chapter. Others want them in the discussion section . Check your department's guidelines or ask your supervisor directly. Have your reference papers ready? Ask Litrevu how the studies in your library designed their research, side by side, with the passage behind each point. Free to start. Try it free ## 6 Common Methodology Mistakes (and How to Fix Them) ## 1. Being too vague “I collected data using interviews” tells your reader almost nothing. How many interviews? How long? What format? With whom? Vagueness is the number one reason methodology sections get sent back for revision. When in doubt, add more detail. ## 2. Not justifying your choices It is not enough to state what you did. You need to explain why. Why qualitative instead of quantitative? Why semi-structured interviews instead of surveys? Why this sample size? Every methodological choice should be backed by a reason, ideally supported by a citation. ## 3. Confusing methodology with methods Methodology is the overall strategy and rationale for your research approach. Methods are the specific tools and procedures you used. Your methodology section should include both, but many students jump straight into methods without first establishing the broader methodological framework. ## 4. Forgetting validity and reliability For quantitative studies, you need to address the reliability and validity of your instruments. For qualitative studies, you need to address credibility and trustworthiness (member checking, triangulation, thick description). Skipping this makes your methodology look incomplete. ## 5. Writing a textbook chapter instead of describing your study Your methodology section should describe what you did in your specific study, not everything there is to know about qualitative research or regression analysis. A brief definition of your method is fine, but do not spend three pages explaining what thematic analysis is in general. ## 6. Hiding limitations Every study has limitations. Your supervisor knows this. Your examiner knows this. Pretending your methodology is flawless hurts your credibility more than honestly acknowledging its weaknesses. Name the limitations, explain how you mitigated them, and move on. ## Methodology Section Templates Here are simplified outlines for each research design type. Use these as starting points and adapt them to your specific study. For more on how each section fits into the broader paper, see our research paper structure guide . ## Qualitative Methodology Template 3.1 Research Design: State your qualitative approach (e.g., phenomenological, grounded theory, case study, ethnographic). Justify why this approach fits your research question. 3.2 Participants and Sampling: Describe your participant criteria, sampling method (typically purposive), sample size, and recruitment process. Justify your sample size with reference to data saturation. 3.3 Data Collection: Describe your interview or observation protocol. Include question types, interview length, setting, and recording method. Attach your interview guide as an appendix. 3.4 Data Analysis: Describe your analysis method (e.g., Braun and Clarke's six-phase thematic analysis). Explain the coding process: initial codes, categories, themes. Name any software used (NVivo, Atlas.ti). 3.5 Trustworthiness: Address credibility (member checking, peer debriefing), transferability (thick description), dependability (audit trail), and confirmability (reflexivity). 3.6 Ethical Considerations: IRB approval, informed consent, anonymity, data storage. ## Quantitative Methodology Template 3.1 Research Design: State your design (e.g., experimental, quasi-experimental, correlational, cross-sectional survey). Identify independent and dependent variables. 3.2 Population and Sampling: Define target population, sampling frame, sampling method (random, stratified), and sample size. Include power analysis if applicable. 3.3 Instrumentation: Describe your survey or measurement instrument. Report reliability (Cronbach's alpha) and validity (content, construct, criterion). Cite the original instrument authors. 3.4 Data Collection Procedures: Describe distribution method, response rate, time period, and data cleaning process. 3.5 Data Analysis: State the statistical tests used and why. Describe assumption checks (normality, homogeneity of variance). Name the software and significance level (e.g., p < 0.05). 3.6 Ethical Considerations: IRB approval, informed consent, data anonymization. ## Mixed Methods Methodology Template 3.1 Research Design: State your mixed methods design (sequential explanatory, sequential exploratory, or convergent). Explain why mixed methods is necessary and which phase takes priority. 3.2 Quantitative Phase: Follow the quantitative template above. Cover sampling, instrumentation, data collection, and analysis for this phase. 3.3 Qualitative Phase: Follow the qualitative template above. Cover participants, data collection, and analysis for this phase. 3.4 Integration: This is the part most students miss. Explain how you combined or compared the two sets of findings. Did qualitative data explain quantitative results? Did you use a joint display table? This section is what makes it mixed methods instead of two separate studies stapled together. 3.5 Ethical Considerations: Cover ethics for both phases. ## How Long Should a Methodology Section Be? Journal article Concise and focused 500 – 1,000 words Undergraduate dissertation Moderate detail 1,000 – 2,000 words Master's thesis Thorough coverage 1,500 – 3,000 words PhD dissertation Comprehensive justification 3,000 – 5,000+ words If your methodology section is under 1,000 words for a thesis, you are probably not providing enough detail. If it is over 5,000 words, you may be including too much textbook-style background. The sweet spot is enough detail for replication without unnecessary filler. ## Where Does the Methodology Fit in Your Paper? The methodology section comes after your literature review and before your results. In a typical thesis or dissertation, it is Chapter 3. In a journal article, it usually appears right after the introduction or literature review. If you are still mapping out the full structure of your paper, our research proposal guide walks through how to plan your methodology before you start writing. Getting the structure right early saves hours of rewriting later. Writing tip: Write your methodology section in the past tense. You are describing what you already did, not what you plan to do. The only exception is a research proposal, where you write in the future tense because the study has not happened yet. ## See How Your Sources Designed Their Studies You still need to make the key decisions: your research design, your sampling approach, your analysis method. Those choices are yours, and they should be. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. What Litrevu can help with is the evidence behind those choices. Ask how the papers in your library designed their studies, who they sampled and how they analysed the data, and compare them side by side, with the passage behind each point, so you can justify your own design against theirs. Try it free, no credit card. Try Litrevu free ## Related Guides - How to Write a Results Section (With Tables, Figures & Examples) - Research Paper Structure: The Complete Guide for Students - How to Write a Literature Review (Step-by-Step Guide for 2026) - Litrevu for Research Papers --- # How to Write a Discussion Section (Without Repeating Your Results) URL: https://litrevu.com/blog/how-to-write-a-discussion-section Category: Writing Sections Published: 2026-04-19 Summary: How to interpret your findings, compare with existing literature, discuss implications, and present limitations. The complete guide for students. Guides ## How to Write a Discussion Section (With Examples & Structure) By Jessica McLaren · 19 April 2026 · 10 min read Your results tell the reader what happened. Your discussion tells them why it matters. Here's how to write one that does the job without rambling or repeating yourself. The discussion section is where most students either shine or fall apart. It's the part of your paper where you stop reporting numbers and start making sense of them. What do your findings actually mean? Do they agree with what other researchers found? What are the real-world implications? If you've ever gotten feedback like “you're just repeating your results” or “where's the interpretation?”, this guide is for you. I'll walk you through what the discussion section actually does, the five parts every good discussion includes, how to structure it, and the mistakes that trip students up the most. No jargon. No hand-waving. Just the stuff that works. (If you haven't written your methodology section yet, start there. The discussion comes after your results.) ## What Does a Discussion Section Do? The discussion section has one job: interpret your results and explain what they mean in the context of your field. That sounds simple, but it trips people up because it requires a different kind of thinking than the rest of the paper. In the Results section, you present data objectively. In the Discussion, you step back and think critically. You connect the dots between what you found and what everyone else has found. You explain the “so what.” Think of it this way: if your Results section is a photograph, your Discussion is the caption that explains what the photo shows and why it matters. A strong discussion does four things: - Interprets your key findings (not just restates them) - Connects your results to existing research - Explains the practical and theoretical implications - Acknowledges limitations and suggests where research should go next If your discussion does all four, you're in excellent shape. ## What Is the Difference Between Results and Discussion? This is the confusion that causes most of the problems. A lot of students blur the line between Results and Discussion, either by interpreting too much in their Results section or by repeating raw data in their Discussion. Here's the cleanest way to think about it: Results: “Participants in the intervention group scored 15% higher on the post-test (M = 78.3, SD = 9.2) compared to the control group (M = 68.1, SD = 10.4), p < .01.” Discussion: “The significant improvement in the intervention group suggests that spaced repetition enhances long-term retention, consistent with findings by Chen et al. (2021) and Park (2022). However, the relatively high variability in both groups indicates that individual learning styles may moderate this effect.” See the difference? Results report numbers. Discussion explains what those numbers mean, why they matter, and how they connect to other research. The Results section says “here's what happened.” The Discussion says “here's why that's interesting.” Quick rule of thumb: If a sentence could appear in the Results section without changing anything, it probably shouldn't be in the Discussion. Your Discussion should contain interpretation, comparison, and meaning, not raw data. ## What Are the 5 Parts of a Discussion Section? Every good discussion section covers five things. You don't always need five separate subheadings, but the content should be there. Think of these as the building blocks. ## 1. Interpretation of Key Findings Start by restating your most important findings, briefly , and then immediately explain what they mean. This is not the place to dump your entire Results section again. Pick the two or three findings that matter most and dig into them. Ask yourself: why did I get these results? What mechanisms might explain them? Were they expected or surprising? A good structure for each finding is: state the finding in one sentence, then spend two to four sentences interpreting it. Explain the possible reasons behind it. If you had a hypothesis, say whether the finding supports or contradicts it and why. ## 2. Comparison With Existing Literature This is what separates a mediocre discussion from a strong one. You need to connect your findings to what other researchers have published. For each major finding, ask: does this agree with prior research? If yes, say so and cite the relevant studies. If your results contradict existing findings, that's even more interesting, explain why there might be a discrepancy. Different sample? Different methodology? Different context? This is where your literature review pays off. If you did a thorough lit review earlier in your paper, you already know the key studies to reference. Pull them back in here and show how your work fits into (or challenges) the bigger picture. Example: “These results align with the findings of Rivera et al. (2022), who reported similar improvements in retention using spaced practice. However, unlike Kim and Park (2021), who observed no significant effect among older adults, our study found benefits across all age groups. This discrepancy may be attributable to our longer intervention period (12 weeks vs. 4 weeks).” ## 3. Implications (Theoretical and Practical) Implications answer the question: so what? Why should anyone care about your findings? There are two types. Theoretical implications are about what your findings mean for the existing body of knowledge. Do they support an existing theory? Challenge it? Extend it to a new context? Practical implications are about real-world applications. If you studied a teaching method, what should teachers do differently? If you studied a drug interaction, what should clinicians know? If you studied consumer behavior, what should marketers take away? Don't overpromise here. Be specific and grounded. Instead of “this could change education forever,” write “these findings suggest that incorporating spaced repetition into weekly lesson plans could improve test performance in undergraduate courses.” ## 4. Limitations (and How to Present Them Honestly) Every study has limitations. Your supervisor knows this. Your reviewers know this. Pretending your study is perfect doesn't make you look confident, it makes you look naive. The key is to present limitations honestly but without undermining your entire paper. State the limitation, explain how it might have affected your results, and (where possible) explain what you did to mitigate it or what future research could do differently. Common limitations to address: - Sample size or composition: “The sample was limited to undergraduate students at a single university, which may limit generalizability.” - Methodological constraints: “Self-reported data may be subject to social desirability bias.” - Scope: “This study focused on short-term effects; long-term outcomes were not assessed.” - External factors: “Data collection occurred during COVID-19, which may have influenced participant behavior.” The right tone for limitations: Too defensive: “The small sample size is a major weakness that makes all our conclusions unreliable.” Too dismissive: “The sample size was small but this does not matter.” Just right: “While the sample size (n = 42) limits statistical power, the effect sizes observed were large and consistent with prior research, suggesting the findings are meaningful.” ## 5. Future Research Directions This is your chance to show that you understand the bigger picture and that your work opens doors for others. Based on your findings and limitations, what should future studies investigate? Be specific. “More research is needed” is the most overused sentence in academia and it tells the reader nothing. Instead, say exactly what kind of research, with what kind of sample, using what methods, and why. Good future research suggestions typically flow directly from your limitations. If your sample was small, suggest a larger-scale replication. If you only looked at short-term effects, suggest a longitudinal study. If you studied one demographic, suggest cross-cultural research. ## How Should You Structure a Discussion Section? The most effective discussion sections follow what I call the “inverted funnel” structure. You start narrow , with your specific findings, and gradually zoom out to broader implications. Here's the flow: 1. Opening paragraph: Restate your main finding(s) briefly and state whether they support your hypothesis. One to two sentences. Don't copy-paste from your Results. 2. Interpretation: Explain what each key finding means. Why did you get these results? What mechanisms are at play? 3. Literature comparison: Show how your results relate to previous studies. Agreement, disagreement, and nuance all go here. 4. Implications: What does this mean for the field? For practitioners? For theory? 5. Limitations: Honest assessment of what constrains your conclusions. 6. Future directions: Specific, actionable suggestions for what comes next. Notice how you move from your specific data points outward to the broader research landscape, then to real-world impact, and finally to what still needs to be done. That progression gives the reader a sense of closure and completeness. Some disciplines combine Results and Discussion into one section. If that's the case for your paper, the same structure applies, you just weave interpretation in right after presenting each result, rather than saving it all for a separate section. Comparing your results with earlier studies? Upload your reference papers and ask Litrevu what they found, side by side, with the passage behind every answer. Free to start. Try it free ## Step-by-Step Writing Process Here's how to actually sit down and write the thing. This process works whether your discussion is 2,000 words or 3,000. ## Step 1: List Your Key Findings Before you write a single paragraph, open your Results section and pull out the two to five most important findings. Write each one as a single sentence. These are your discussion anchors, everything else revolves around them. ## Step 2: For Each Finding, Ask “Why?” Under each finding, jot down possible explanations. Why did this happen? What theory supports this? Was it expected? If it was unexpected, what could account for the surprise? Don't worry about writing polished prose yet, just get your reasoning down. ## Step 3: Connect Each Finding to the Literature Go back to your literature review and identify which studies relate to each finding. Note whether your result agrees or disagrees with each one, and write a sentence or two about why. This step is much faster if you kept good notes during your lit review. ## Step 4: Draft the Interpretation Paragraphs Now write. For each major finding, aim for one to three paragraphs that cover the interpretation and the literature comparison. Use this formula: state the finding briefly, interpret it, compare it with existing research, and explain any discrepancies. ## Step 5: Write the Implications Ask yourself: what should someone do differently because of my findings? Write one paragraph on theoretical implications and one on practical implications. Be concrete. Vague implications are as bad as no implications. ## Step 6: Write the Limitations and Future Directions List three to five limitations. For each one, write one to two sentences explaining the limitation and how it might affect interpretation. Then turn each limitation into a future research suggestion. This section usually writes itself once you've been honest about what your study can and cannot claim. ## Step 7: Revise for Flow and Redundancy Read through the whole discussion from start to finish. Check that each paragraph connects logically to the next. Cut any sentences that just repeat your Results without adding interpretation. Make sure you're not introducing new data, the Discussion is for interpretation, not new findings. ## What Mistakes Should You Avoid in a Discussion Section? These are the errors I see most often. Avoid them and your discussion will already be stronger than most. ## 1. Repeating your results verbatim This is the number one problem. If your Discussion reads like a copy of your Results section with “this is important” tacked on the end, it needs a rewrite. You can reference findings, but the emphasis must be on interpretation, not repetition. ## 2. Introducing new data The Discussion is not the place to present results you forgot to include earlier. If it's data or a statistical test, it belongs in the Results section. The Discussion is exclusively for interpretation and meaning. ## 3. Being too defensive about limitations Some students write their limitations section like an apology letter. “This study is limited because… and also limited because… and therefore all conclusions should be taken with extreme caution.” That undermines your entire paper. State your limitations matter-of-factly, explain how they might affect the results, and move on. ## 4. Ignoring contradictory findings If your results contradict a well-known study, don't pretend that study doesn't exist. Engage with the contradiction. Possible explanations, different methods, different populations, different contexts , actually make your discussion more interesting and credible. Ignoring contradictions makes it look like you didn't do your homework. ## 5. Making claims your data doesn't support Be careful with your language. If you ran a correlational study, you cannot claim causation. If your sample was 30 undergrads, you cannot generalize to “all humans.” Use hedging language where appropriate: “suggests,” “indicates,” “may,” “it is possible that.” Your supervisor will catch overstatements every time. ## How Long Should a Discussion Section Be? (Word Count Guide) There is no universal rule, but here are realistic benchmarks based on what supervisors and journals typically expect: Course paper or short research paper 3,000 – 5,000 words total 500 – 1,000 words Master's thesis chapter 15,000 – 25,000 words total 1,500 – 2,500 words PhD dissertation chapter 60,000 – 80,000 words total 3,000 – 5,000 words Journal article 5,000 – 8,000 words total 1,000 – 2,000 words As a rough guide, your Discussion should be about 25 to 35 percent of your total paper length. It's typically one of the longest sections alongside the Literature Review. If you're writing a thesis and your discussion is under 1,500 words, you're probably not interpreting deeply enough. If it's over 3,000 words, check whether you're repeating yourself or including content that belongs in a different section. ## Writing Your Discussion Section? The critical thinking is yours, only you can interpret what your results mean and why they matter. That part cannot be automated. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. What Litrevu can help with is the comparison underneath your interpretation. Ask what the studies in your library found on the same question, line their samples and findings up side by side, and open the passage behind every point, so you know exactly where your results agree with earlier work and where they depart. Try it free, no credit card. Try Litrevu free ## Related Guides - How to Write a Results Section (With Tables, Figures & Examples) - How to Write a Conclusion for a Research Paper (Template + Examples) - Research Paper Structure: The Complete Guide for Students - Litrevu for Research Papers --- # How to Write a Results Section (With Tables, Figures & Examples) URL: https://litrevu.com/blog/how-to-write-a-results-section Category: Writing Sections Published: 2026-04-19 Summary: How to present your findings objectively, use tables and figures effectively, report statistical results, and structure your results section for clarity. Guides ## How to Write a Results Section (With Tables, Figures & Examples) By Samuel de Bruyn · 19 April 2026 · 10 min read You've done the hard work of collecting and analyzing your data. Now you need to present it in a way that's clear, objective, and well-organized. Here's how to write a results section that does exactly that. The results section is the core of your research paper. It's where you finally get to show what you found. But “showing what you found” is harder than it sounds. You have to present your data clearly, use the right tables and figures, report statistics correctly, and do it all without slipping into interpretation. If you've ever gotten feedback like “this belongs in the discussion” or “where are the numbers?” or “why isn't this table referenced in the text?”, this guide is for you. I'll walk you through what the results section actually does, how to structure it, when to use tables versus figures, how to report statistical results, and the mistakes that trip students up the most. Practical advice, no hand-waving. (If you haven't written your methodology section yet, start there. The results section comes right after it.) ## What Does a Results Section Do? The results section has one job: present your findings objectively. No interpretation, no opinion, no commentary on what the numbers mean. Just the data. That sounds simple, and in theory it is. But students constantly blur the line between reporting and interpreting. The results section should answer the question “what did you find?”, not “what does it mean?” or “why does it matter?” Those questions belong in the discussion section . Think of the results section as a factual report. You're a journalist describing what happened, not an analyst explaining why. Your reader should be able to look at your results and form their own conclusions before you guide them through yours in the discussion. A strong results section does four things: - Presents findings in a logical order that mirrors your research questions or hypotheses - Uses tables and figures to display data efficiently - Reports statistical tests with the appropriate values (test statistic, p-value, effect size, confidence interval) - Describes key patterns and trends without explaining why they occurred If your results section does all four, you're in good shape. The trick is restraint, saying what happened without saying what it means. ## Results vs Discussion: What Goes Where? This is the single most common point of confusion, and getting it wrong is one of the fastest ways to lose marks. Many students either interpret too much in their results or dump raw numbers into their discussion. Here's the clearest way to think about the divide: The same finding presented in each section: Results: “Participants who used the spaced repetition app scored significantly higher on the retention test (M = 82.4, SD = 7.1) than those who used traditional flashcards (M = 71.2, SD = 9.8), t(58) = 5.12, p < .001, d = 1.33.” Discussion: “The significantly higher retention scores in the spaced repetition group suggest that distributing practice over time is more effective than massed study, consistent with the spacing effect documented by Cepeda et al. (2006). The large effect size (d = 1.33) indicates a practically meaningful difference that could inform study strategy recommendations for undergraduate students.” See the difference? The results entry reports what happened: the numbers, the test, the significance level. The discussion entry interprets what those numbers mean, connects them to existing research, and draws out implications. Quick rule of thumb: If a sentence contains the words “suggests,” “indicates,” “may explain,” or “is consistent with,” it probably belongs in the Discussion, not the Results. The Results section deals in facts. The Discussion deals in meaning. One exception: some disciplines (particularly in the sciences) use a combined Results and Discussion section. If your department or journal requires this format, you present each finding followed immediately by its interpretation. Even then, keep the reporting and interpreting clearly distinct within each paragraph. ## How to Structure Your Results Section The best results sections are organized around your research questions or hypotheses, not around the order you happened to run your analyses. Your reader should be able to follow a logical thread from one finding to the next. Here is a structure that works for most research papers. You don't need all of these subsections for every paper, but this gives you a framework to work from: 1. Descriptive statistics: Start with the big picture. Sample demographics, response rates, means and standard deviations for your key variables. This orients the reader before you get into the hypothesis tests. 2. Main findings: Present the results that directly answer your primary research questions. These are your most important analyses. Lead with them. 3. Secondary findings: Additional analyses that support or contextualize your main findings. Subgroup analyses, interaction effects, sensitivity checks. 4. Negative or null results: Results where you did not find a significant effect. These matter just as much as positive findings and should not be hidden. Report them with the same rigor. 5. Supplementary results: Any additional analyses (robustness checks, exploratory analyses) that strengthen confidence in your main findings but are not central to your research questions. For each subsection, follow this pattern: state what analysis you ran, report the result (with the relevant statistics), and briefly describe the pattern. Then move to the next analysis. Keep it tight. Example flow for a main finding: “To test whether gamification increased engagement, an independent samples t-test was conducted comparing daily login frequency between the gamified group and the control group. Participants in the gamified condition logged in significantly more often (M = 4.7, SD = 1.3) than those in the control condition (M = 2.9, SD = 1.8), t(96) = 5.84, p < .001, d = 1.18. Table 2 presents the full descriptive statistics for both groups.” Notice how that example states the analysis, reports the numbers, and references a table, all without interpreting what the result means. That interpretation belongs in the discussion. ## How to Present Tables and Figures Tables and figures are the backbone of a strong results section. Used well, they let your reader see patterns at a glance that would take paragraphs of text to describe. Used poorly, they clutter your paper and confuse the reader. ## When to Use a Table vs a Figure Use a table when your reader needs to see exact numbers. Tables are ideal for presenting precise values, means, standard deviations, p-values, regression coefficients, frequencies. If someone might want to look up a specific value, put it in a table. Use a figure (chart, graph, plot) when you want to show a pattern, trend, or relationship. Figures are better for communicating the shape of your data, distributions, changes over time, comparisons between groups, interactions between variables. If the takeaway is visual, use a figure. Quick guide: Exact values (means, SDs, coefficients) → Table Trends over time → Line chart Group comparisons → Bar chart or box plot Distributions → Histogram or density plot Relationships between variables → Scatter plot Proportions → Stacked bar chart (avoid pie charts) ## Numbering and Captions Every table and figure needs a number and a caption. Tables and figures are numbered separately in sequence: Table 1, Table 2, Table 3 and Figure 1, Figure 2, Figure 3. Table captions go above the table. Figure captions go below the figure. This is a universal convention in academic writing and your supervisor will notice if you get it wrong. A good caption is self-explanatory. Someone should be able to understand the table or figure without reading the surrounding text. Include what the data represents, the sample or conditions, and any important notes (e.g., “* p < .05”). Example captions: Table: “Table 3. Mean engagement scores by condition and time point (N = 98). Standard deviations in parentheses.” Figure: “Figure 2. Change in retention scores across four assessment points for the intervention (n = 50) and control (n = 48) groups. Error bars represent 95% confidence intervals.” ## Referencing Tables and Figures in Text This is a rule that students break constantly: every table and figure must be referenced in the body text. You cannot just drop a table into your paper and hope the reader notices it. Guide them to it and tell them what to look for. The reference should come before or at the point where the table or figure appears, never after. And it should add value , don't just say “see Table 1.” Instead, highlight the key pattern: “As shown in Table 1, participants in the treatment group scored consistently higher across all three time points.” ## How to Report Statistical Results Reporting statistics correctly is non-negotiable. Reviewers and supervisors will check. The exact format depends on your citation style and discipline, but here are the essentials that apply almost universally. For every statistical test, report at minimum: - The test used (t-test, ANOVA, chi-square, regression, etc.) - The test statistic (t, F, χ², r, β) - Degrees of freedom where applicable - The p-value (exact value preferred, e.g., p = .003 rather than p < .05) - Effect size (Cohen's d, η², r², odds ratio) - Confidence intervals where relevant (increasingly expected by journals) Examples for common test types: Independent samples t-test: “The treatment group (M = 74.5, SD = 8.2) scored significantly higher than the control group (M = 66.3, SD = 9.7), t(86) = 4.31, p < .001, d = 0.92, 95% CI [4.32, 12.08].” One-way ANOVA: “There was a significant main effect of teaching method on exam performance, F(2, 117) = 8.94, p < .001, η² = .13. Post-hoc comparisons using Tukey's HSD revealed that the active learning group scored significantly higher than both the lecture-only group (p = .002) and the blended group (p = .018).” Chi-square test: “There was a significant association between study method and pass rate, χ²(2, N = 210) = 14.73, p < .001, V = .26.” Multiple regression: “The overall model was significant, F(3, 146) = 22.17, p < .001, R² = .31. Study hours (β = .42, p < .001) and prior GPA (β = .28, p = .003) were significant predictors, while attendance (β = .09, p = .31) was not.” A few formatting notes. Italicize statistical symbols (p, t, F, d, M, SD) when writing in APA style. Report p-values to three decimal places (p = .003, not p = 0.003, no leading zero in APA). For very small p-values, use p < .001 rather than writing out many decimal places. Always match your formatting to the citation style your paper requires. How did studies like yours report their results? Upload your reference papers and ask Litrevu how they reported comparable outcomes and what they found. Every answer opens to the passage it came from. Free to start. Try it free ## Step-by-Step Writing Process Here's how to actually sit down and write your results section. This process works whether you have five tables or fifty. ## Step 1: Organize Your Analyses by Research Question Before you write anything, list your research questions or hypotheses. Under each one, note which analyses you ran and what the key outputs were. This gives you a natural structure for the section. Each research question becomes a subsection or a logical block of paragraphs. ## Step 2: Start With Descriptive Statistics Open your results section by describing your sample and the basic properties of your data. How many participants? What were the demographics? What are the means and standard deviations for your main variables? This grounds the reader before you start testing hypotheses. A table is usually the most efficient way to present descriptive statistics. ## Step 3: Report Each Analysis Systematically For each analysis, follow a consistent pattern: state what you tested, report the result with the full statistical output, and briefly describe the direction and magnitude of the effect. Do not interpret it. Repeat this pattern for every analysis. Consistency makes the section easy to read and shows that you understand the conventions. ## Step 4: Create Your Tables and Figures Build your tables and figures as you go. For each analysis, ask: would the reader benefit from seeing this visually? If you're presenting regression coefficients, a table is usually better than listing them in the text. If you're showing a trend over time, a line chart communicates the pattern instantly. Give every table and figure a clear, self-explanatory caption. ## Step 5: Reference Every Table and Figure in the Text Go back through your text and make sure every table and figure is referenced. Do not just say “see Table 2” , highlight what the reader should notice. The text should tell the story, and the tables and figures should provide the supporting evidence. ## Step 6: Include Negative and Null Results Report analyses where you did not find a significant effect with the same level of detail as your significant findings. Leaving out null results is a form of reporting bias and reviewers will ask about it. A non-significant result is still a result. Report it, give it its statistics, and move on. The interpretation of why it might be non-significant belongs in the discussion. ## Common Mistakes to Avoid These are the errors that show up in results sections over and over. Avoid them and you'll be ahead of most students. ## 1. Interpreting your results instead of reporting them This is the most common mistake by far. If you find yourself writing “this suggests that” or “this may be because” in your results section, stop. That language belongs in the discussion. The results section reports facts: the group scored higher, the correlation was significant, the model explained 31% of the variance. Save the “why” and “so what” for later. ## 2. Hiding negative or null results Students often bury or omit non-significant results because they feel like failures. They're not. Non-significant findings are informative and journals increasingly require them. If you tested a hypothesis and it was not supported, report it. Trying to hide null results is a red flag for reviewers and undermines the credibility of your entire paper. ## 3. Inconsistent formatting of statistics If you report one t-test as “t(58) = 5.12, p < .001” and another as “the p value was 0.04 and the t was 2.1”, you look sloppy. Pick a format that matches your citation style (APA, for example, has very specific rules) and use it consistently for every single test. Consistency signals competence. ## 4. Wall of text without visuals A results section that is nothing but dense paragraphs of numbers is exhausting to read. Tables and figures exist to make your data accessible. If you have more than three or four statistical results, at least some of them should be in a table. If you have any kind of trend, comparison, or distribution, consider a figure. Break up the text. Let the visuals do the heavy lifting for complex data. ## 5. Not referencing tables and figures in the text A table or figure that sits in your paper without being mentioned in the text is an orphan. The reader does not know when to look at it or what to take away from it. Every single table and figure must be explicitly referenced in the body text, ideally with a sentence that highlights the key finding it shows. If a table or figure is not worth referencing in the text, ask yourself whether it needs to be in the paper at all. ## How Long Should a Results Section Be? (Word Count Guide) The length of your results section depends on how much data you have and how many research questions you're addressing. Here are realistic benchmarks: Course paper or short research paper 3,000 – 5,000 words total 400 – 800 words Master's thesis chapter 15,000 – 25,000 words total 1,500 – 3,000 words PhD dissertation chapter 60,000 – 80,000 words total 3,000 – 6,000 words Journal article 5,000 – 8,000 words total 800 – 1,500 words As a rough guide, the results section typically accounts for about 15 to 25 percent of your total paper length. It's usually shorter than the discussion and literature review but longer than the introduction or conclusion. Keep in mind that tables and figures add to the effective length without adding to the word count. A results section with 1,000 words of text plus four well-constructed tables and two figures is substantially more information-dense than 1,000 words of text alone. Focus on clarity over length. ## Writing Your Results Section? The data analysis is yours, only you know what your numbers show and which findings matter most. That expertise cannot be outsourced. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Litrevu works from the papers a researcher adds, not from the researcher’s own data, so the results section stays the researcher’s to write. What it can show is how comparable studies reported their outcomes and what they found, with each answer linked to its passage. Where Litrevu helps is the reading around your results. Ask how the studies in your library reported comparable outcomes, compare their findings side by side in a table with every cell cited, and later check the claims in your discussion against what those papers actually say. Many universities do not allow AI-written text in submitted work, so check your institution's policy and declare how you used AI. Try it free, no credit card. Try Litrevu free ## Related Guides - How to Write a Discussion Section - How to Write a Methodology Section - Research Paper Structure: A Complete Guide - Litrevu for Research Papers --- # How to Write a Conclusion for a Research Paper (Template + Examples) URL: https://litrevu.com/blog/how-to-write-a-conclusion Category: Writing Sections Published: 2026-04-19 Summary: The 4 essential components of a strong conclusion, what NOT to include, and a step-by-step process for synthesizing your findings into a powerful ending. Guides ## How to Write a Conclusion for a Research Paper (Template + Examples) By Jessica McLaren · 19 April 2026 · 8 min read The conclusion is the last thing your reader reads, and often the first thing your supervisor skims. Here's how to write one that does justice to the rest of your paper. You've written thousands of words. You've wrestled with your literature review, agonized over your methodology, and painstakingly reported your results. You're exhausted. And now you have to wrap it all up in a few paragraphs that somehow capture everything your study accomplished. If you've ever stared at a blinking cursor after your Discussion section thinking “so… in conclusion… I did stuff?”, you're not alone. The conclusion is deceptively hard to write because it requires you to shift from the detail-level thinking you've been doing into a bigger-picture mode. You need to synthesize, not summarize. Show significance, not just recap. This guide covers exactly what your conclusion needs to include, what it should leave out, how to structure it step by step, and the mistakes that trip students up the most. Whether you're finishing a course paper, a master's thesis, or a PhD dissertation, the principles are the same. (If you haven't written your discussion section yet, start there. The conclusion comes after the discussion.) ## What Does a Conclusion Actually Do? The conclusion has three jobs, and none of them is “repeat everything you already said.” First, it synthesizes. Your reader has just plowed through thousands of words of methodology, results, and discussion. The conclusion pulls the threads together and shows how everything connects. It answers the question: what does all of this add up to? Second, it shows significance. This is where you make the case for why your work matters. Not just what you found, but why anyone should care. What does your study contribute to the field? What practical difference could it make? Third, it provides closure. A good conclusion gives the reader a sense of completeness. It signals that the argument has been made, the evidence has been presented, and the work is done. No loose ends. No dangling questions (unless you deliberately pose one as a future direction). Think of the conclusion like the final paragraph of a closing argument in a courtroom. The evidence has already been presented. The witnesses have testified. Now you stand up, tie it all together, and tell the jury why it matters. ## Conclusion vs Discussion: What's the Difference? This is one of the most common points of confusion, and it's the reason so many conclusions read like a second discussion section. The two serve different purposes, and understanding the boundary is critical. The Discussion is where you interpret your findings in detail. You compare results with the literature, explain why things turned out the way they did, address contradictions, discuss limitations, and suggest future research. It's analytical, granular, and heavily cited. The Conclusion zooms out. It doesn't re-interpret your findings or re-engage with the literature. Instead, it takes a bird's-eye view of the entire study, what you set out to do, what you found, what it contributes, and where things go from here. It's the final word. Discussion: “The significant improvement in retention observed in the intervention group aligns with findings by Chen et al. (2021), who reported similar gains using spaced repetition. However, the high variability within both groups suggests that individual learning preferences moderate the effect.” Conclusion: “This study demonstrated that spaced repetition significantly improves long-term retention among undergraduate students. These findings contribute practical evidence for educators designing review schedules and suggest that personalized spacing algorithms warrant further investigation.” See the difference? The Discussion digs into one finding and compares it with specific studies. The Conclusion steps back and states the overall contribution without re-citing sources. The Discussion is a microscope. The Conclusion is a telescope. Quick rule of thumb: If you find yourself citing specific studies or comparing your results with particular findings in your conclusion, you're probably writing a second Discussion section. The conclusion should stand on its own, broad, confident, and forward-looking. ## The 4 Essential Components of a Strong Conclusion Every strong research paper conclusion covers four things. The exact structure varies by discipline and paper length, but these four components should always be present. Think of them as the load-bearing walls, remove one and the whole thing feels incomplete. ## 1. Restate the Research Problem and Purpose Open your conclusion by reminding the reader what this study was about. Restate your research problem and the purpose of the study in one to two sentences. This re-anchors the reader after all the detail they've just read through. The key word here is “restate,” not “copy-paste.” Don't lift the exact sentence from your introduction. Rephrase it in a way that reflects what you now know after completing the study. Your understanding of the problem should be richer at this point. Example: Introduction version: “This study aims to examine the effects of spaced repetition on long-term retention in undergraduate biology courses.” Conclusion version: “This study investigated whether spaced repetition could improve long-term retention of core concepts in undergraduate biology, addressing a gap in evidence-based teaching strategies for STEM education.” Notice how the conclusion version is slightly more mature. It references the gap, contextualizes the problem, and sounds like it was written by someone who has now completed the research, not someone who is about to start it. ## 2. Summarize Your Key Findings After restating the purpose, summarize your most important findings. This is not a comprehensive rehash of your Results section. Pick the two to four findings that are most central to answering your research question and state them briefly. The crucial difference between summarizing in the conclusion versus the results is that here, you're interpretive. Don't just say what you found, say what it means. Each finding should come with a brief statement of its significance. Example: Too raw: “The intervention group scored 15% higher (p < .01).” Conclusion-appropriate: “Students who used spaced repetition demonstrated significantly better retention, suggesting that distributed practice is an effective strategy for long-term learning in biology courses.” You're synthesizing, not summarizing. The difference matters. Summarizing says “here is what I found.” Synthesizing says “here is what I found and this is what it means for the bigger picture.” ## 3. State Your Contributions This is the part most students underwrite. What does your study actually add to the field? What do we know now that we didn't know before? Your contribution could be empirical (new data), methodological (a better way to study something), theoretical (a new framework or extension of an existing one), or practical (actionable recommendations). Be explicit about this. Don't make the reader infer your contribution, spell it out. Phrases like “this study contributes to the literature by…” or “the findings extend current understanding of…” work well here. If you're writing a thesis or dissertation, your contribution is arguably the most important part of your conclusion. Examiners look for a clear articulation of what is new and valuable about your work. Don't bury it. ## 4. End With Implications or a Call to Action Close with a forward-looking statement. This could be a practical recommendation (what practitioners should do differently based on your findings), a policy implication (what policymakers should consider), or a research direction (what the next logical study would be). The best conclusions end with a sentence that resonates. Something that sticks with the reader and gives them a reason to care about what you wrote. This isn't about being dramatic, it's about landing the argument. Strong closing examples: - “As universities continue to explore evidence-based teaching strategies, spaced repetition offers a low-cost, scalable approach that warrants integration into curriculum design.” - “These findings suggest that current water quality monitoring protocols in the region may need to be revised to account for seasonal contamination patterns.” - “Future work should investigate whether these benefits persist over longer time horizons and across different student populations.” Avoid ending with a vague platitude like “more research is needed.” If you suggest future research, be specific about what kind, with whom, and why. ## What NOT to Include in Your Conclusion Knowing what to leave out is just as important as knowing what to put in. These are the most common things that end up in conclusions but shouldn't be there: - New data or results. If it wasn't in your Results section, it has no business appearing in the conclusion. No new statistics, no new findings, no “oh, I also noticed that…” - New citations or references. The conclusion is not the place to introduce new sources. If you need to cite a study to make your point, that argument belongs in the Discussion, not here. - Lengthy literature discussion. You already engaged with the literature in your Discussion section. The conclusion should reference the broader field briefly, but it shouldn't include another round of comparing your results with specific studies. - Apologies for limitations. Limitations belong in the Discussion section. Your conclusion should project confidence in your contributions, not undermine them with a list of things that went wrong. It's fine to briefly mention scope, but the detailed limitations analysis lives elsewhere. - Entirely new arguments. If you're making a point in the conclusion that you never set up in the body of the paper, it will feel disjointed. The conclusion ties together threads that already exist, it doesn't introduce new ones. A useful test: Read your conclusion in isolation, without the rest of the paper. Does it make sense as a standalone summary of your study's purpose, findings, and significance? If yes, you're on track. Does it raise questions that were never addressed earlier? If yes, those points need to move to the Discussion or be removed. Placing your findings in the field? Upload your reference papers and ask Litrevu what they found and what they leave open, with the passage behind every answer. Free to start. Try it free ## Step-by-Step Writing Process Here's a concrete process for writing your conclusion. This works whether your conclusion is 200 words or 2,000. ## Step 1: Reread Your Introduction and Research Question Before writing a single word of your conclusion, go back and read your introduction . Remind yourself of the research question, the gap you identified, and the promise you made to the reader. Your conclusion needs to deliver on that promise. If your introduction said “this study aims to examine X,” your conclusion needs to say “this study examined X and found Y.” ## Step 2: List Your Key Findings in Plain Language Open a blank document and write down your three to four most important findings in simple, non-technical sentences. No jargon, no p-values, no statistical notation. Just the core takeaways as you would explain them to a smart friend who hasn't read the paper. These become the backbone of your conclusion. ## Step 3: Articulate the “So What” For each finding, write one sentence answering the question: why does this matter? What does it change? Who benefits? This step transforms your conclusion from a summary into a synthesis. If you can't articulate the significance of a finding in one sentence, it probably doesn't need to be in the conclusion. ## Step 4: Draft the Conclusion Paragraph by Paragraph Now write. Follow the four-component structure: restate the problem (1–2 sentences), summarize key findings with significance (2–4 sentences), state contributions (2–3 sentences), and close with implications or a forward-looking statement (1–2 sentences). For a short paper, this might be a single paragraph. For a thesis, it might be a full chapter with subheadings. ## Step 5: Read It Against Your Introduction Place your introduction and conclusion side by side. They should mirror each other, the introduction opens with a problem, and the conclusion closes with a resolution. The introduction promises, and the conclusion delivers. If there's a disconnect, either your conclusion is missing something or your introduction overpromised. Fix whichever one is off. ## Common Mistakes to Avoid These are the five most common mistakes I see in research paper conclusions. Avoid them and you'll be ahead of most of your peers. ## 1. Just summarizing instead of synthesizing This is the number one problem. Students walk through their paper section by section, “In the introduction, I discussed… In the literature review, I found… In the methodology, I used…” That is a summary, not a conclusion. A conclusion pulls threads together and shows the bigger picture. It answers “what does all of this add up to?” rather than “what did each section say?” ## 2. Introducing new information If you suddenly mention a study you never cited, present data that wasn't in your results, or make an argument you never built up to, your conclusion will confuse the reader. Everything in the conclusion should trace back to something already established in the paper. New evidence belongs in earlier sections. ## 3. Being too vague about contributions Phrases like “this study makes an important contribution to the field” mean nothing unless you specify what that contribution is. Your reader (and especially your examiner) wants to see exactly what you added. “This study provides the first empirical evidence that X works in Y context” is infinitely more valuable than “this study contributes to knowledge.” ## 4. Ending abruptly Some conclusions just… stop. The last sentence states a finding and then the paper is over. It feels incomplete, like the writer ran out of energy. Always end with a forward-looking statement, an implication, a recommendation, or a final thought that gives the reader something to take away. Your conclusion should land, not just stop. ## 5. Making it too long A bloated conclusion is usually a sign that you're re-discussing findings instead of concluding. The conclusion should be concise and punchy. If your conclusion is approaching the length of your Discussion, you're almost certainly repeating content. Cut aggressively. Every sentence in the conclusion should earn its place. ## Word Count Guide: How Long Should a Conclusion Be? The conclusion is one of the shorter sections in a research paper. As a general rule, it should be about 5 to 10 percent of your total paper length. Here are realistic benchmarks: Course paper or short research paper 3,000 – 5,000 words total 200 – 400 words Master's thesis chapter 15,000 – 25,000 words total 800 – 1,500 words PhD dissertation chapter 60,000 – 80,000 words total 2,000 – 4,000 words Journal article 5,000 – 8,000 words total 300 – 600 words The conclusion should always be shorter than your Discussion section. If it's longer, that's a strong signal that you're duplicating content. The Discussion is where the heavy analytical lifting happens. The conclusion distills that analysis into its essence. For a thesis or dissertation, your conclusion chapter might also include a brief “recommendations” subsection. That's fine, just keep the recommendations focused and directly tied to your findings. ## Writing Your Conclusion? The synthesis is yours, only you can decide what your study means for the field and articulate why it matters. That part cannot be automated. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. What Litrevu can do is help you check your conclusion. Ask what the papers in your library recommend for future research, so your recommendations build on theirs, and paste a paragraph of your conclusion to see which of its claims about the field your sources back. Try it free, no credit card. Try Litrevu free ## Related Guides - How to Write a Discussion Section (With Examples & Structure) - How to Write an Abstract for a Research Paper - Research Paper Structure: The Complete Guide - Litrevu for Research Papers --- # How to Write an Abstract for a Research Paper (5-Step Method) URL: https://litrevu.com/blog/how-to-write-an-abstract Category: Writing Sections Published: 2026-04-19 Summary: The 5 essential components of an abstract, when to write it, word count guidelines, and the one-sentence-per-section method that makes it easy. Guides ## How to Write an Abstract (Examples + Template for 2026) By Jessica McLaren · 19 April 2026 · 8 min read Your abstract is the first thing people read, and often the only thing. Here's how to write one that actually does its job. Here's a stat that should make you pay attention: most people who encounter your research will never read the full paper. They will read the abstract, decide if it is relevant, and move on. That makes your abstract the most important 250 words you will ever write. It is the elevator pitch for your entire study. Nail it and readers keep going. Miss the mark and your paper collects dust in a database nobody scrolls through. The good news? Abstracts follow a predictable formula. Once you know the five components and the sentence templates for each one, writing an abstract becomes almost mechanical. Let me walk you through it. ## What Is an Abstract? An abstract is a short, self-contained summary of your entire research paper. It tells the reader what you studied, how you studied it, what you found, and why it matters, all in roughly 150 to 300 words. Think of it as a miniature version of your paper. Someone who reads only your abstract should walk away understanding the core of your research without opening the full document. Abstracts serve several practical purposes: - They help readers decide whether to read the full paper. - They are indexed by databases like Google Scholar, PubMed, and Scopus, meaning they directly affect whether anyone finds your work. - Conference organizers use them to accept or reject submissions. - Your supervisor will read it first to gauge the quality of everything that follows. ## When Should You Write the Abstract? After the paper is finished. Always after. This is the single most important rule of abstract writing and the one students break most often. You cannot accurately summarize something you have not finished writing. Your results may shift during analysis. Your conclusion may evolve as you write the introduction and literature review . Writing the abstract first almost guarantees it will not match the final paper. Finish every section. Then sit down and summarize the whole thing. That is the order that works. ## The 5 Components of Every Abstract (With Sentence Templates) Every strong abstract contains the same five elements. Some are longer, some shorter, but they are always present. Miss one and your abstract feels incomplete. Here is each component with a plug-and-play sentence template you can adapt. ## 1. Background / Context Open with one to two sentences that set the stage. What is the broader topic? Why does it matter right now? This is not a full literature review, just enough context so the reader understands the landscape. Template: “[Topic] is a growing concern in [field/context], yet [specific gap or unresolved issue] remains poorly understood.” ## 2. Objective / Purpose State what your study set out to do. Be specific. One sentence is usually enough. This is the bridge between the problem you identified and the work you did to address it. Template: “This study investigates/examines/evaluates [specific research question or relationship] in order to [purpose].” ## 3. Methods Briefly describe how you conducted the research. Include the research design, sample size, data collection method, and key analytical approach. Keep it tight, one to three sentences maximum. Template: “A [research design] was employed, using [data collection method] with [sample size and description]. Data were analyzed using [analytical technique].” ## 4. Results Summarize your key findings. Include the most important numbers or outcomes. Do not hedge or be vague, the reader wants to know what you actually found. Template: “Results indicate that [key finding with specific data point], with [secondary finding or comparison]. This effect was [statistically significant / consistent / notable].” ## 5. Conclusion / Implications End with what the findings mean. What is the practical takeaway? What should change because of this research? One or two sentences is plenty. Template: “These findings suggest that [practical implication], and [recommendation or future direction].” ## Structured vs. Unstructured Abstracts You will encounter two formats. Which one you use depends on your institution or target journal. ## Unstructured Abstracts A single continuous paragraph with no headings or labels. You still include all five components, but they flow together as regular prose. This is the most common format for theses, dissertations, and humanities or social science journals. ## Structured Abstracts Uses explicit labels like Background , Objective , Methods , Results , and Conclusion . Each section is clearly separated. Standard in medical, health sciences, and many STEM journals. Which should you use? Check your institution's guidelines or the target journal's submission requirements. When in doubt, ask your supervisor. If no format is specified, go with unstructured, it is the safer default for most academic work. ## How Long Should an Abstract Be? Abstract length varies by context. Here are the ranges you will encounter most often: Most journal articles 150 – 250 words Theses and dissertations 200 – 350 words Conference submissions 200 – 500 words APA format (strict) 250 words max A good target for most student papers is 250 words. That is enough to cover all five components without feeling cramped, and it fits within almost every institution's limit. Exceeding the word count is one of the easiest ways to get desk-rejected before anyone reads your work. ## Annotated Example Abstract Here is a complete abstract with each component labeled so you can see the formula in action. This one runs about 150 words , concise, specific, and complete. Background Antibiotic resistance poses a growing threat to public health, with hospital-acquired infections becoming increasingly difficult to treat using conventional therapies. Objective This study evaluated the efficacy of a novel silver-nanoparticle coating on surgical instruments in reducing post-operative bacterial contamination rates. Methods A randomized controlled trial was conducted across four hospitals over 12 months, involving 2,400 surgical procedures. Coated and uncoated instruments were assigned randomly, and contamination was measured via bacterial cultures at 24 and 72 hours post-operation. Results Instruments with the silver-nanoparticle coating showed a 43% reduction in bacterial contamination at 24 hours (p < 0.001) and a 38% reduction at 72 hours (p < 0.01) compared to uncoated controls. The effect was most pronounced for gram-positive bacteria. Conclusion Silver-nanoparticle coatings significantly reduce post-operative bacterial contamination and represent a viable supplementary strategy for infection control in surgical settings. Further research should explore long-term durability and cost-effectiveness at scale. Notice how each component flows naturally into the next. A reader walks away knowing exactly what the study did and found , no need to open the full paper to understand the contribution. See what your sources found, side by side Upload the papers you cite and Litrevu compares their aims, designs and findings in one table, every cell cited. Try it free. Try it free ## 5 Common Abstract Mistakes (and How to Fix Them) ## 1. Writing the abstract before the paper is done This is the most common mistake and the most damaging. Your results might change, your methods might shift, and your conclusions will evolve. The abstract is always the last thing you write. No exceptions. ## 2. Including citations Abstracts should not contain citations or references. They are meant to stand alone. If you feel the need to cite something, you are including too much background. Trim it down. ## 3. Being too vague about results “The results were significant” tells the reader nothing. What results? How significant? Which direction? Use actual numbers when you have them. Specificity is what separates a useful abstract from a forgettable one. ## 4. Exceeding the word limit If the guideline says 250 words, submit 250 or fewer. Not 260. Not 275. Journals enforce these limits strictly. Going over signals that you either did not read the guidelines or cannot write concisely. ## 5. Other quick fixes - Do not include information that is not in the paper. Every claim in your abstract must appear somewhere in the full document. - Avoid jargon without context. Your abstract should be accessible to a broad academic audience, not just specialists. - Do not copy-paste sentences from the paper. Copied sentences often assume context the abstract reader does not have. Write it fresh. ## Where the Abstract Fits in Your Paper The abstract sits right after the title page and before the main body of your paper . Even though it appears first, it is written last. This confuses some students, but the logic is simple: you are summarizing a completed work, not previewing an unfinished one. If you are still working on earlier sections, finish those first. Your abstract will be better for it because you will know exactly what you need to summarize. ## Know What Your Study Adds An abstract has to say, in a sentence or two, what your study adds to what is already known. Litrevu reads every paper you add, so you can ask what those studies found, compare their aims, methods and findings side by side, and see where your contribution sits. Every answer opens to the passage it came from. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The abstract stays yours to write. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution's policy and declare how you used AI. Try it free, no credit card. Try Litrevu free ## Related Guides - How to Write a Conclusion for a Research Paper (Template + Examples) - Research Paper Structure: The Complete Guide for Students - How to Write a Thesis Statement (Examples That Actually Work) - Litrevu for Research Papers --- # APA Citation Format: The Complete Guide with Examples URL: https://litrevu.com/blog/apa-citation-format Category: Writing Sections Published: 2026-04-19 Summary: How to cite sources in APA format (7th edition). Covers in-text citations, reference lists, journal articles, books, and websites. Citations ## APA Citation Format: The Complete Guide with Examples (7th Edition) By Wasim Ghoor · 19 April 2026 · 8 min read You have 48 hours until your paper is due. Your professor wants APA format. And you are staring at a reference list wondering whether the period goes before or after the parenthetical date. You are not alone. APA citation format is the most widely used citation style in the social sciences, education, psychology, and business. Over 30,000 people search for it every month. And most of them are in the exact same boat you are. This guide gives you everything you need. No fluff. Just the rules, the format, and copy-paste examples you can use right now. If you are not sure whether APA is the right style for your field, check our comparison of all 6 citation styles first. ## APA 7th Edition Basics: When to Use It and Who Requires It The American Psychological Association published the 7th edition of its Publication Manual in October 2019. It is the current standard. If your professor says "use APA," they mean this edition unless they specifically say otherwise. APA format is required by most programs in: - Psychology and behavioral sciences - Education and teaching - Social work and sociology - Business and management - Nursing and public health - Communication and media studies The two core pieces of APA citation format are in-text citations (short references inside your paragraphs) and the reference list (the full details at the end of your paper). Every in-text citation must have a matching reference list entry, and vice versa. ## In-Text Citations: Rules and Examples In-text citations follow the author-date system. You include the author's last name and the year of publication. Here is exactly how it works for every scenario you will encounter. ## One Author Use the author's last name and the year. You can write it two ways: Parenthetical: Research supports this conclusion (Smith, 2022). Narrative: Smith (2022) found that research supports this conclusion. ## Two Authors List both names every time. Use "&" in parenthetical citations and "and" in narrative citations. Parenthetical: (Smith & Johnson, 2022) Narrative: Smith and Johnson (2022) demonstrated that... ## Three or More Authors This is where APA 7th edition simplified things. Use the first author's last name followed by "et al." from the very first citation. No more listing all authors the first time. Parenthetical: (Smith et al., 2022) Narrative: Smith et al. (2022) argued that... ## Direct Quotes and Page Numbers When you quote someone's exact words, you must include a page number. Use "p." for a single page and "pp." for a range. Short quote: The results were "statistically significant" (Smith, 2022, p. 45). Page range: (Smith, 2022, pp. 45-48) Narrative: Smith (2022) noted that "the effect size was large" (p. 45). For quotes of 40 words or more, use a block quote: indent the entire quote 0.5 inches from the left margin, skip quotation marks, and place the citation after the closing period. Litrevu keeps your APA references straight Ask your papers anything and see the passage behind each answer. References come formatted in APA, with a reference list you can export to Word, PDF, BibTeX or RIS. Free to start. Try Litrevu free ## Reference List Format: Templates and Examples Your reference list goes on a new page at the end of your paper. Title it "References" (centered, bold). Entries are double-spaced with a hanging indent (first line flush left, subsequent lines indented 0.5 inches). Alphabetize by the first author's last name. ## Journal Article Template Author, A. A., & Author, B. B. (Year). Title of article. Title of Periodical, Volume (Issue), Page range. https://doi.org/xxxxx Example Grady, J. S., Her, M., Moreno, G., Perez, C., & Yelinek, J. (2019). Emotions in storybooks: A comparison of storybooks that represent ethnic and racial groups in the United States. Psychology of Popular Media Culture, 8 (3), 207-217. https://doi.org/10.1037/ppm0000185 ## Book Template Author, A. A. (Year). Title of work: Capital letter for subtitle . Publisher. https://doi.org/xxxxx Example Brown, L. S. (2018). Feminist therapy (2nd ed.). American Psychological Association. https://doi.org/10.1037/0000092-000 ## Edited Book Chapter Template Author, A. A. (Year). Title of chapter. In E. E. Editor (Ed.), Title of book (pp. xx-xx). Publisher. https://doi.org/xxxxx Example Dillard, J. P. (2020). Currents in the study of persuasion. In M. B. Oliver, A. A. Raney, & J. Bryant (Eds.), Media effects: Advances in theory and research (4th ed., pp. 115-129). Routledge. ## Website Template Author, A. A. (Year, Month Day). Title of page . Site Name. https://url Example World Health Organization. (2023, March 10). Mental health in the workplace . https://www.who.int/ news-room/fact-sheets/detail/mental-health-at-work Note: If the author and the site name are the same (like the WHO example above), omit the site name to avoid repetition. This is a 7th edition rule that many students miss. ## The 7 Most Common APA Mistakes (and How to Fix Them) These are the errors that cost students the most marks. Every single one is avoidable. - Using "et al." wrong. In APA 7th edition, use "et al." for three or more authors from the first citation onward. The old rule (listing all authors the first time) was APA 6th edition. If you are still doing that, update your approach. - Missing the DOI. If a journal article has a DOI, you must include it. Format it as a URL: https://doi.org/10.xxxx. Do not write "DOI: 10.xxxx" or "Retrieved from." - Forgetting the hanging indent. Every reference list entry needs a hanging indent. The first line is flush left; every subsequent line is indented 0.5 inches. Most word processors have a setting for this under paragraph formatting. - Capitalizing article titles incorrectly. In the reference list, article and book titles use sentence case (only capitalize the first word, the first word after a colon, and proper nouns). Journal titles use title case. - Mismatched citations and references. Every in-text citation needs a reference list entry. Every reference list entry needs at least one in-text citation. No orphans allowed. This is especially common in literature reviews. See our literature review writing guide for tips on managing citations across a long section. - Using "Retrieved from" for everything. APA 7th edition dropped "Retrieved from" for most sources. Only use it when the content might change over time (like a social media post or a wiki page). For stable sources, just include the URL. - No page numbers on direct quotes. Paraphrasing does not require page numbers (though APA encourages them). Direct quotes always do. Missing page numbers on quotes is an automatic deduction at most universities. ## APA Citation Format Quick Cheat Sheet Bookmark this table. It covers every scenario you are likely to encounter. Scenario In-Text Format 1 author (Smith, 2022) 2 authors (Smith & Johnson, 2022) 3+ authors (Smith et al., 2022) Direct quote (Smith, 2022, p. 15) Organization as author (World Health Organization, 2023) No author ("Title of Article," 2022) No date (Smith, n.d.) Multiple works, same author (Smith, 2020, 2022) Multiple sources (Adams, 2020; Smith, 2022) Source Type Reference List Order Journal article Author. (Year). Title. Journal, Vol (Issue), Pages. DOI Book Author. (Year). Title . Publisher. DOI Edited chapter Author. (Year). Chapter title. In Editor (Ed.), Book (pp. X-X). Publisher. Website Author. (Date). Title . Site Name. URL ## Check Your APA Citations Are Right Litrevu formats your references in APA with a reference list you can export, and each citation opens the passage it came from, so you can stop guessing where the period goes and check each citation against the source. Need to see how citations look inside a real literature review? Check out our annotated example . Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Try it free, no credit card required. Try Litrevu free ## Related Guides - Harvard Referencing: The Complete Guide with Examples - How to Cite Sources in a Research Paper (6 Styles Compared) - How to Write a Literature Review (Step-by-Step Guide for 2026) - Litrevu for Literature Reviews --- # Harvard Referencing: In-Text Citations and Reference List URL: https://litrevu.com/blog/harvard-referencing-guide Category: Writing Sections Published: 2026-04-19 Summary: Harvard in-text citations and reference list entries for every source type, in one table, plus how UK, Australian and South African universities differ. Citations ## Harvard Referencing: In-Text Citations and Reference List By Wasim Ghoor · 19 April 2026 · 16 min read · Updated 10 November 2026 Harvard referencing is an author-date style: you cite the author’s surname and the year in the text, as in (Braun and Clarke, 2006), add a page number when you quote, and list every source alphabetically by surname in a reference list at the end. There is no single official Harvard manual, so the small rules (commas, when to use “et al.”, how page numbers look) change by university, and the version taught by the Open University, Newcastle University and De Montfort University, among others, is Cite Them Right. Harvard referencing, defined: Harvard is a family of author-date citation styles in which each in-text citation gives the author’s surname and year of publication, and a reference list ordered alphabetically by surname gives the full details of every source cited. No single body owns Harvard; UNSW’s guide says plainly that there is “no single authority on the Harvard style”, which is why each university publishes its own version. (Need a broader overview? See how to cite sources across 6 styles . Using APA instead? See the APA citation format guide .) ## What is Harvard referencing? Harvard referencing is an author-date citation system: every time you use a source, you put the author’s surname and the year in the sentence, and the full details go in an alphabetical reference list at the end. A reader who sees (Page et al., 2021) turns to “P” in the reference list and finds the full entry for that paper. Think of a Harvard citation as a library call number. The call number on the spine is short on purpose; the catalogue holds the full record. In Harvard the in-text citation is the call number and the reference list is the catalogue. Harvard differs from numbered styles such as IEEE and Vancouver, where a citation is a number like [3] and the reference list runs in the order sources first appear. Harvard uses no numbers and no footnotes. St George’s, University of London, lists footnotes, “ibid.” and “op. cit.” among the habits to drop: “Footnotes are not used in Harvard, so you should not use them in your written work.” Because Harvard has no owner, the examples on this page follow Cite Them Right, the version taught by the Open University, Newcastle University, De Montfort University and St George’s, unless a section names another university’s guide. How does Harvard differ by country? shows the other versions side by side. ## How do you write a Harvard in-text (inline) citation? A Harvard in-text citation, also called an inline citation, gives the author’s surname and the year in brackets, separated by a comma in Cite Them Right: (Bell, 2014). When the author’s name is part of your sentence, only the year goes in brackets: Bell (2014) argues that... Those two shapes have names. The bracketed version is a parenthetical citation; the version where the name carries the sentence is a narrative citation. Both point to the same reference list entry. The Cite Them Right rules for in-text citations, as taught in the Open University’s quick guide and Newcastle University’s 2025 style sheet: Harvard in-text citations in Cite Them Right, by situation Situation Parenthetical citation Narrative citation One author (Bell, 2014) Bell (2014) shows... Two authors (Braun and Clarke, 2006) Braun and Clarke (2006) describe... Three authors (Picker, Griffiths and Weaving, 2002) Picker, Griffiths and Weaving (2002) describe... Four or more authors (Page et al., 2021) Page et al. (2021) report... Direct quote, one page (Cottrell, 2019, p. 250) Cottrell (2019, p. 250) writes that “...” Direct quote, page range (Pears and Shields, 2022, pp. 20-21) Pears and Shields (2022, pp. 20-21) note... Organisation as author (Department for Education, 2021) The Department for Education (2021) set out... No author (Title of the work, Year) Title of the work (Year) states... No date (Surname, no date) Surname (no date) explains... Same author, same year (Surname, 2025a; Surname, 2025b) Surname (2025a; 2025b)... Source you read about in another source (Surname, Year, cited in Surname, Year) Surname (Year, cited in Surname, Year) Cite Them Right joins two names with “and”, not “&”, in both the text and the reference list. Several other Harvard versions use “&” inside brackets: UNSW writes (Gerster & Basset 1987) and the University of Cape Town (UCT) uses “&” in parenthetical citations. Citing several sources at once means separating them with semicolons inside one pair of brackets. The order inside the brackets varies: Leeds Harvard lists sources by year, oldest first, then alphabetically within a year, so check which order your own Harvard guide asks for. Citing a source you only read about inside another paper needs the “cited in” form, and only the paper you actually read goes in the reference list. How to cite a source cited in another source shows the Harvard, APA, MLA and Chicago versions side by side. ## How do you format a Harvard reference list? A Harvard reference list goes at the end of your work under the heading “References” or “Reference list”, with one entry for every source you cited, ordered alphabetically by the first author’s surname. Each entry starts with the surname and initials, then the year in brackets, then the title and publication details; in Cite Them Right, the title of an article goes in single quotation marks and the title of a book or journal goes in italics. A reference list entry is the full catalogue record behind the call number. Every in-text citation needs one matching entry, and every entry needs at least one citation in the text. The Cite Them Right patterns, with real sources: Harvard reference list entries in Cite Them Right, by source type Source type Cite Them Right pattern Example Journal article with a DOI Surname, Initial. (Year) ‘Title of article’, Journal , volume(issue), pp. pages. Available at: DOI. Braun, V. and Clarke, V. (2006) ‘Using thematic analysis in psychology’, Qualitative Research in Psychology , 3(2), pp. 77-101. Available at: https://doi.org/10.1191/1478088706qp063oa. Article with four or more authors First author, Initial. et al. (Year) ‘Title’, Journal , volume, article number. Available at: DOI. (or list every author, if your module asks) Page, M.J. et al. (2021) ‘The PRISMA 2020 statement: an updated guideline for reporting systematic reviews’, BMJ , 372, n71. Available at: https://doi.org/10.1136/bmj.n71. Book Surname, Initial. (Year) Title . Edition (if not the first). Publisher. Bell, J. (2014) Doing your research project . Open University Press. Chapter in an edited book Surname, Initial. (Year) ‘Title of chapter’, in Initial. Surname (ed.) Title of book . Publisher, pp. pages. Format illustration only: Author, A. (Year) ‘Chapter title’, in B. Editor (ed.) Book title . Publisher, pp. 00-00. Web page or online report Author or organisation (Year) Title . Available at: URL (Accessed: date). Department for Education (2021) Skills for jobs: lifelong learning for opportunity and growth . Available at: https://www.gov.uk/government/publications/skills-for-jobs-lifelong-learning-for-opportunity-and-growth (Accessed: 10 November 2026). Thesis or dissertation Surname, Initial. (Year) Title . Type of thesis. Awarding institution. Dang, V.A. (2007) Three essays in financial economics . PhD thesis. University of Leeds. Three details trip students up in these entries. First, a journal article with a DOI needs no URL or accessed date in Cite Them Right; the University of Worcester’s library quotes Cite Them Right on this: “because the DOI is the permanent identifier for the source, it is not necessary to include an accessed date.” Second, Cite Them Right as taught by Newcastle (2025 style sheet), the Open University and St George’s leaves out the place of publication for books and gives the publisher alone, while UCT’s guide still includes the place. Third, Newcastle’s 2025 sheet allows “et al.” in the reference list only for sources with more than 10 authors, while De Montfort University accepts “et al.” there unless your programme or module asks for every name; the PRISMA 2020 statement, with 26 authors, qualifies under both rules. Leeds Harvard, the University of Leeds’ own version, punctuates entries differently: no brackets around the year and “[Accessed 5 September 2024]” in square brackets. If your university names Leeds Harvard, copy its examples rather than the Cite Them Right patterns in the table. ## Does a Harvard reference list go in alphabetical order? Yes. A Harvard reference list is always in alphabetical order by the first author’s surname, and every university guide checked for this page says so: St George’s, UCT, Stellenbosch University, UNSW and the Australian Government Style Manual. Harvard reference lists are never numbered and never listed in the order sources first appear in the text; numbered order belongs to Vancouver and IEEE. The alphabet only settles the first letter, so the guides add tie-breakers. UCT’s guide orders entries by the same author oldest first, puts undated entries after dated ones, and places a single-author entry before entries that author wrote with others. Two works by the same author in the same year get a, b and c after the year (2011a, 2011b) in both the citation and the list. When there is no author, UCT files the entry under the first significant word of the title, ignoring “A”, “An” and “The”, and Stellenbosch arranges it by title. ## When do you add page numbers in Harvard? In Harvard you always add a page number when you quote directly, and many universities also want one when you paraphrase a specific passage. Cite Them Right writes the page as “p.” for one page and “pp.” for a range, after the year: (Cottrell, 2019, p. 250). The paraphrase rule is where guides split, so the safe reading depends on your university: - UCL: you “must include a page number/s” when you are “Directly quoting” or “Paraphrasing.” - UNSW: a page number is needed when you paraphrase, summarise or quote, and not when you cite only the main idea of a work. - St George’s (Cite Them Right): include “p.” or “pp.” when quoting or using ideas from specific pages. - Australian Government Style Manual: page numbers for direct quotations only, after a colon: (White and Jones 2019:23–24). The format changes too. UCT and Stellenbosch put a colon between the year and the page, with no “p.”: (Van Wilgen, 2009:335). A source with no page numbers, such as a web page, needs no page in Leeds Harvard, and UNSW suggests section and paragraph numbers instead, as in (Morris 2004, sec. 3, par. 2). The reference list itself carries page ranges only for parts of a larger work: journal articles and book chapters. UCL notes that you “do not usually include the specific page numbers that you have quoted” in the reference list. ## Harvard vs APA: what is the difference? Harvard and APA are both author-date styles, so the in-text citations look almost the same; the differences sit in the punctuation and the reference list. APA is one fixed standard, the Publication Manual of the American Psychological Association , 7th edition, while Harvard varies by university. The comparison below uses Cite Them Right for Harvard. Harvard (Cite Them Right) and APA 7, feature by feature Feature Harvard (Cite Them Right) APA 7th edition Who sets the rules No single authority; each university publishes a version American Psychological Association (Publication Manual, sections 8.10 to 8.36 for citations) Two authors in brackets (Braun and Clarke, 2006) (Braun & Clarke, 2006) “et al.” in the text From four authors From three authors, in every citation Authors in the reference list All, unless more than 10 (Newcastle 2025) Up to and including 20 Year in the reference (2006) with no full stop after (2006). with a full stop Article title In single quotation marks No quotation marks, sentence case Page range in the reference pp. 77-101 77–101 DOI Available at: https://doi.org/... https://doi.org/... with no label Place of publication for books Not included (Newcastle 2025, Open University) Not included Edition 12th edn. (12th ed.) The same paper in both styles shows the difference in one glance: - Harvard (Cite Them Right): Braun, V. and Clarke, V. (2006) ‘Using thematic analysis in psychology’, Qualitative Research in Psychology , 3(2), pp. 77-101. Available at: https://doi.org/10.1191/1478088706qp063oa. - APA 7: Braun, V., & Clarke, V. (2006). Using thematic analysis in psychology. Qualitative Research in Psychology, 3 (2), 77–101. https://doi.org/10.1191/1478088706qp063oa The biggest practical difference is “et al.”: APA shortens a three-author paper to the first author plus “et al.” from the first citation, while Cite Them Right names all three authors. If you switch between the two styles, check the “and” versus “&” and the quotation marks around article titles as well. Want to check your Harvard citations are right? Add your PDFs and ask Litrevu about them: answers cite the passage they came from, references come formatted in Harvard, and you can check each one against your sources. Free to start. Try it free ## How does Harvard differ by country? Harvard differs by country mainly in three small rules: whether a comma separates author and year, how many authors trigger “et al.”, and whether a page number follows “p.” or a colon. Many UK universities follow Cite Them Right, Australian guides such as the Australian Government Style Manual and UNSW’s leave out the comma, and South African universities such as UCT and Stellenbosch put the page after a colon. Seven university Harvard guides, as each one writes its own examples Guide (country) In-text example from the guide “et al.” in the text Page format No date Cite Them Right (UK: Open University, Newcastle, St George’s) (Pears and Shields, 2022, pp. 20-21) Four or more authors p. / pp. no date Leeds Harvard (UK: University of Leeds) (Ahmed and Meehan, 2012) Three or more authors p. no date UCL Harvard (UK: University College London) (Clark et al., 2020) Four or more authors p. / pp., for quotes and paraphrase no date Australian Government Style Manual Jones (2017) Three or more authors Colon: (White and Jones 2019:23–24) n.d. UNSW Harvard (Australia) (Karskens 1997, p. 23) More than three authors p. / pp., also for paraphrase n.d. UCT Author-date (South Africa) (Van Wilgen, 2009:335) Four or more authors Colon after the year n.d. Harvard (Stellenbosch) (South Africa) (Raubenheimer, 2024:7) All names at first mention for three to five authors, then et al. Colon after the year [s.a.] or [n.d.] ## Harvard in the UK Many UK universities teach Cite Them Right Harvard: comma between author and year, “and” between two names, “et al.” from four authors, and “p.” before page numbers. The Open University, Newcastle, De Montfort and St George’s all publish guides built on Cite Them Right. Two large exceptions run their own versions: Leeds Harvard uses “et al.” from three authors and writes accessed dates as [Accessed 5 September 2024], and UCL’s guide requires page numbers for paraphrases as well as quotes. ## Harvard in Australia Australian Harvard guides such as the Style Manual and UNSW’s drop the comma between author and year. The Australian Government Style Manual says “Don’t separate the name and date with a comma”, uses “et al.” from three authors, and puts page numbers after a colon: White and Jones (2019:23–24). UNSW’s Harvard guide, based on the 2002 sixth edition of the Style Manual, also drops the comma but keeps “p.”: (Karskens 1997, p. 23), and lists every author in the reference list, never “et al.”. ## Harvard in South Africa South African Harvard guides keep the comma but put the page after a colon. UCT’s Author-date Reference Guide (the 2016 edition, published open access by UCT Libraries in 2017) writes (Van Wilgen, 2009:335), uses “&” inside brackets and “and” in running text, and gives access dates as [2016, January 20]. Stellenbosch University Library’s Harvard examples (updated 18 September 2026) write (Raubenheimer, 2024:7), accept “[s.a.]” (sine anno) or “[n.d.]” for a missing date, and say that “No access date is to be used after a Digital Object Identifier.” Students at UNISA and other South African universities should use the guide their own department names, since departments differ. ## What are common Harvard referencing mistakes? The most common Harvard referencing mistakes are mixing two versions of Harvard in one reference list, leaving out page numbers on direct quotes, and using “et al.” where your guide does not allow it. Every one of them is checkable before you submit. - Mixing versions of Harvard. A comma in one citation and none in the next, or “and” here and “&” there, usually means examples were copied from two different university guides. Pick the guide your department names and follow its examples throughout. - No page number on a direct quote. Cite Them Right, UCL, UNSW, UCT and the Australian Government Style Manual all require a page number for a direct quotation, whatever else they disagree on. - “et al.” in the wrong place. St George’s flags using “et al.” in the reference list when it belongs only in the text; under Newcastle’s 2025 Cite Them Right sheet, “et al.” in the reference list is for more than 10 authors only. “et al.” is never correct for two authors in any version. - Numbering the reference list. St George’s lists numbering references, or ordering them as they appear in the text, as a mistake: Harvard lists are alphabetical by surname. - Initials in the in-text citation. St George’s: write “(Williams, 2019)”, not “(Williams, J., 2019)”. Initials belong only in the reference list. - Citing the editor instead of the chapter author. St George’s notes that for a chapter in an edited book, the in-text citation names the chapter’s author, and the reference names both the chapter author and the book’s editor. - Mixing book formats. Newcastle’s 2025 Cite Them Right sheet leaves out the place of publication while UCT’s guide keeps it, so a list that mixes “Cape Town: Struik” with “Struik” shows two guides’ rules at once. Follow the one book format your guide shows. - Adding an accessed date to a DOI. Cite Them Right (University of Worcester) and Stellenbosch both say a DOI needs no accessed date; keep accessed dates for URLs. Correct Harvard formatting does not prove a reference exists. If any part of your reference list came from an AI tool, how to spot fake AI citations before you submit gives a five-step check, and the free reference checker checks whether each reference matches a real paper. To check that every Harvard in-text citation has a matching reference list entry, and the other way round, use the free in-text citation checker , which handles Cite Them Right Harvard. ## What else do students ask about Harvard referencing? ## Do you number references in Harvard? No. Harvard reference lists are not numbered; entries are listed alphabetically by the first author's surname, and in-text citations use the author and year instead of a number. Numbered references belong to Vancouver and IEEE. ## Does Harvard use "et al."? Yes, in the in-text citation. Cite Them Right and UCL use "et al." from four authors, while Leeds Harvard and the Australian Government Style Manual use it from three. In the reference list, Newcastle's 2025 Cite Them Right sheet allows "et al." only for more than 10 authors, and UNSW never uses it there. ## How do I cite a source with no date in Harvard? Write "no date" in place of the year in Cite Them Right and UCL Harvard, as in (Surname, no date), in both the citation and the reference list. Australian and South African guides such as the Style Manual, UNSW and UCT use "n.d." instead, and Stellenbosch also accepts "[s.a.]". ## Is Harvard referencing the same at every university? No. Harvard has no single official manual, so each university publishes its own version, and they differ on commas, "et al." thresholds, page number format and how dates are written. Use the Harvard guide your university or department names, and copy its examples exactly. ## Do you put a comma between the author and the year in Harvard? In Cite Them Right, Leeds, UCL, UCT and Stellenbosch Harvard, yes: (Bell, 2014). The Australian Government Style Manual and UNSW Harvard leave the comma out: (Karskens 1997, p. 23). Your university's guide decides which version you use. ## How do I cite a source cited in another source in Harvard? Name the original author and the source you read, joined by "cited in": (Surname, Year, cited in Surname, Year). Only the source you actually read goes in the reference list. How to cite a source cited in another source shows the full Harvard, APA, MLA and Chicago versions. ## How do you check Harvard citations against your sources? Litrevu supports Harvard and 5 other citation styles, APA, MLA , Chicago, IEEE, and Vancouver. Add your reference papers, ask what they say, and get in-text citations and a reference list you can export, so you can stop second-guessing whether the comma goes before or after the year and check each one against the source. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The reference list exports to Word, PDF, BibTeX or RIS, and every in-text citation opens the passage it came from. Try it free, no credit card required. Try Litrevu free ## Related Guides - APA Citation Format: The Complete Guide with Examples - How to Cite Sources in a Research Paper (6 Styles Compared) - How to Cite a Source Within a Source (APA, Harvard, MLA) - How to Spot Fake AI Citations Before You Submit (2026 Guide) --- # How to Cite Sources in a Research Paper (6 Styles Compared) URL: https://litrevu.com/blog/how-to-cite-sources-research-paper Category: Writing Sections Published: 2026-04-19 Summary: APA, MLA, Chicago, Harvard, Vancouver, and IEEE citation styles compared side by side. Quick reference with examples for each. Citations ## How to Cite Sources in a Research Paper (6 Styles Compared) By Wasim Ghoor · 19 April 2026 · 9 min read Citing sources correctly is one of those skills nobody teaches you properly -- until you lose marks for getting it wrong. This guide breaks down the six most common citation styles with real examples so you can get it right the first time. ## Why Citations Actually Matter Citations are not just academic decoration. They serve three critical purposes: - Avoiding plagiarism. Using someone else's ideas without credit is academic misconduct. Universities run every submission through detection software. Proper citations protect you. - Building credibility. When you cite peer-reviewed sources, you show your argument is grounded in evidence -- not just opinion. Reviewers and professors notice this immediately. - Enabling traceability. Readers need to verify your claims and dig deeper into the literature. Citations give them a clear path to the original source. Bottom line: if you skip citations or format them incorrectly, you risk losing marks -- or worse, facing a plagiarism investigation. It is not worth the gamble. For a deeper dive into APA specifically, see our complete APA citation format guide . ## The 6 Most Common Citation Styles (With Examples) Every citation style formats the same information differently: author names, publication year, title, journal, volume, and pages. Below is one journal-article example in each style so you can see the differences at a glance. APA (7th Edition) Williams, R., & Chen, L. (2023). The impact of remote learning on student engagement. Journal of Educational Psychology, 45(3), 112-128. https://doi.org/10.1234/jep.2023.045 MLA (9th Edition) Williams, Rachel, and Lin Chen. "The Impact of Remote Learning on Student Engagement." Journal of Educational Psychology, vol. 45, no. 3, 2023, pp. 112-128. Chicago (Notes & Bibliography) Williams, Rachel, and Lin Chen. "The Impact of Remote Learning on Student Engagement." Journal of Educational Psychology 45, no. 3 (2023): 112-128. Harvard Williams, R. and Chen, L. (2023) 'The impact of remote learning on student engagement', Journal of Educational Psychology, 45(3), pp. 112-128. Vancouver Williams R, Chen L. The impact of remote learning on student engagement. J Educ Psychol. 2023;45(3):112-128. IEEE R. Williams and L. Chen, "The impact of remote learning on student engagement," J. Educ. Psychol., vol. 45, no. 3, pp. 112-128, 2023. Notice how the same article looks completely different depending on the style. Author name order, punctuation, italicization, and date placement all change. ## In-Text Citations vs Reference Lists: What is the Difference? Every citation system has two parts, and confusing them is a common mistake: ## In-Text Citations Short markers placed directly in your sentences wherever you reference a source. They tell the reader "this claim comes from somewhere specific." Author-date styles (APA, Harvard, Chicago Author-Date): (Williams & Chen, 2023) Numeric styles (Vancouver, IEEE): [1] or [3, 7] ## Reference List (Bibliography) The full list at the end of your paper with complete publication details for every source you cited. Each in-text marker must match an entry here. If a source appears in your reference list but is never cited in the text, remove it. If you cite something in the text but it is missing from the list, add it. Think of in-text citations as signposts and the reference list as the map. You need both for the reader to follow your trail. Managing citations across a full literature review gets complex fast. Our literature review writing guide covers how to handle this. ## How to Pick the Right Citation Style Here is the honest answer: you almost never get to choose. Your department, professor, or target journal tells you which style to use. Before you write a single citation, check these: - Assignment brief or syllabus. Most professors specify a style. If yours does not, ask. It takes one email. - Department guidelines. Many departments have a default style. Psychology departments almost always require APA. Humanities lean toward MLA or Chicago. - Journal submission guidelines. If you are submitting to a journal, the "Author Guidelines" page will specify the exact style and often link to a template. - Discipline norms. When no one specifies, follow the convention for your field (see the comparison table below). The worst thing you can do is mix styles within the same paper. Consistency matters more than which style you pick. If you are writing a literature review specifically, check whether you need a narrative or systematic approach -- the citation requirements differ. Litrevu keeps every citation tied to your sources Add your PDFs, ask what they say, and each citation opens the passage it came from. References in APA, Harvard, MLA, Chicago, IEEE or Vancouver. Free to start. Try Litrevu free ## Citation Styles Compared at a Glance Style In-Text Format Common In APA Author-date Psychology, Education, Social Sciences MLA Author-page Literature, Languages, Humanities Chicago Notes/bibliography or author-date History, Arts, some Sciences Harvard Author-date Business, UK & Australian universities Vancouver Numeric (superscript or brackets) Medicine, Nursing, Biomedical IEEE Numeric (brackets) Engineering, Computer Science, IT Author-date styles show the author's name and year in the text. Numeric styles use a number that maps to the reference list. Both approaches are valid -- the right one depends on your field. ## Tools That Make Citation Easier Manually formatting dozens of citations is tedious and error-prone. These tools handle the formatting for you: ## AI Assistants That Cite Your Own Sources If you are using AI in your research, the biggest risk is hallucinated citations -- references that look real but point to papers that do not exist. Litrevu cites only the reference papers you add, and each citation opens the passage it came from. You pick a citation style (APA, MLA , Chicago, Harvard, Vancouver, or IEEE), and the reference list is formatted for you. No manual formatting. ## Reference Managers Tools like Zotero (free), Mendeley (free), and EndNote (paid) let you save sources, organize them in folders, and insert formatted citations into Word or Google Docs. They are great for managing large reference libraries across multiple projects. ## Automated Citation Tools Websites like MyBib , Citation Machine , and Scribbr let you paste a DOI or URL and get a formatted citation back. Useful for quick one-offs, but they sometimes produce errors with unusual source types. ## Stop Formatting Citations by Hand Litrevu supports all 6 citation styles. Add your reference papers, pick a style, and ask what they say, with a reference list you can export to Word, PDF, BibTeX or RIS. Try it free, no credit card required. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Each citation in an answer points back to a specific passage in the uploaded PDF, so you can check it before it goes into your paper. Try Litrevu Free ## Related Guides - APA Citation Format: The Complete Guide with Examples - Harvard Referencing: The Complete Guide with Examples - How to Write a Literature Review (Step-by-Step Guide for 2026) - Litrevu for Literature Reviews --- # Literature Review Example: Annotated Sample You Can Follow URL: https://litrevu.com/blog/literature-review-example Category: Literature Review Published: 2026-04-19 Summary: A real literature review example with annotations explaining why each section works. Use it as a template for your own paper. ← Back to Blog ## Literature Review Example: An Annotated Sample You Can Actually Follow By Jessica McLaren · 19 April 2026 · 10 min read Here is the truth about literature reviews: nobody learns how to write one by reading instructions alone. You need to see one. You need to see how the sentences connect, how sources get woven together, and how a single paragraph can move from evidence to analysis without breaking a sweat. That is exactly what this page gives you. Below you will find a real literature review paragraph, fully annotated, plus the patterns and templates you can steal for your own paper. No fluff, no theory-only lectures. Just a concrete example and a clear breakdown. ## Why Examples Matter More Than Instructions Think about it. Your professor hands you a rubric that says "synthesize the literature" and "critically evaluate sources." That sounds great on paper, but what does synthesis actually look like in a finished paragraph? A good literature review example solves three problems at once. First, it shows you the target. You stop guessing what your professor expects and start seeing the standard. Second, it reveals the internal logic, the invisible moves experienced researchers make without thinking. Third, it gives you a scaffold you can fill in with your own sources. So let us look at one. If you want the full step-by-step process first, start with our guide to writing a literature review . ## Annotated Literature Review Example: Social Media and Adolescent Mental Health Below is a sample paragraph from a literature review on the impact of social media on adolescent mental health. After the paragraph, callout boxes explain why each part works. [1] The relationship between social media use and adolescent mental health has emerged as one of the most debated topics in developmental psychology over the past decade. [2] Twenge and Campbell (2018) analyzed two nationally representative surveys covering more than 500,000 adolescents and found that increased screen time was significantly associated with higher rates of depressive symptoms and suicidality, particularly among girls. [3] Similarly, a longitudinal cohort study by Coyne et al. (2020) tracked 500 participants over six years and reported that time spent on social media predicted increased anxiety and loneliness in early adulthood. [4] However, not all evidence supports a straightforward negative relationship. Orben and Przybylski (2019) re-analyzed three large-scale datasets using specification curve analysis and concluded that the association between digital technology use and well-being was negative but trivially small, accounting for less than 0.4% of the variation in well-being. [5] This discrepancy likely reflects differences in methodology: studies relying on self-reported screen time and cross-sectional designs tend to report larger effects than those using objective usage data or longitudinal frameworks (Odgers & Jensen, 2020). [6] Taken together, the current evidence suggests that the impact of social media on adolescent mental health is real but modest, and that future research must move beyond total screen time to examine specific activities, such as passive scrolling versus active communication, to produce actionable findings for clinicians and educators. Note: Author names and findings above are illustrative. Always verify citations against original sources. [1] Topic Sentence Opens with the big-picture claim. It names the specific relationship under review and signals its importance. Notice it does not cite a source yet. The topic sentence is your framing, not someone else's. [2] First Piece of Evidence Introduces the strongest supporting study. Notice the specifics: the method (two national surveys), the sample size (500,000+), and the key finding. Vague summaries like "studies show" kill credibility. Concrete details build it. [3] Corroborating Evidence "Similarly" signals this study points in the same direction. A second source with a different design (longitudinal cohort) strengthens the argument. This is synthesis: grouping sources that agree and showing why they agree. [4] Counter-Evidence (Critical Analysis) "However" pivots to a contradicting study. This is where most student papers fall flat. They only present sources that agree. Including counter-evidence and engaging with it shows critical thinking, which is exactly what reviewers look for. [5] Methodological Explanation Instead of leaving the contradiction hanging, this sentence explains why the studies disagree. Comparing methodologies (self-reported vs. objective data, cross-sectional vs. longitudinal) is one of the highest-value moves in a literature review. It shows you understand the research, not just the results. [6] Synthesis and Transition "Taken together" pulls all the threads into a single, balanced conclusion. It also points forward, naming a specific gap (passive scrolling vs. active communication) that sets up the next section of the review. Never end a paragraph in a dead end. ## The Four-Part Structure Inside Every Strong Paragraph Look at that example again. Every high-scoring literature review paragraph follows the same underlying structure, even when the topic changes completely. - Topic sentence. State the claim or theme this paragraph will address. Use your own voice. Do not open with a citation. - Evidence synthesis. Present two or three sources that speak to the same point. Group them by agreement, methodology, or chronology. Include concrete details (sample size, design, key finding). - Critical analysis. Introduce disagreement or limitations. Explain why findings differ. Compare methods, populations, or theoretical frameworks. - Transition. Wrap up with a balanced takeaway and bridge to the next paragraph or section. Identify a gap, raise a question, or narrow the focus. Want to see the themes across your own papers? Upload your papers and Litrevu shows the themes they share and where they disagree, each answer linked to its passage. Free to start. Try Litrevu free Writing a literature review right now? Ask your papers anything, compare studies side by side and check your writing against your sources. Every citation opens the passage it came from. Free to start. No card needed. What's your research topic? Find papers on it ## Three Patterns You Can Steal Right Now ## 1. Group by Theme, Not by Source The most common mistake in student literature reviews is the "source-by-source" approach: "Smith (2019) found X. Jones (2020) found Y. Lee (2021) found Z." That is a reading list, not a review. Instead, organize each paragraph around a theme or argument, then pull in multiple sources to support it. The example above organizes around the theme of effect size, not around individual papers. This thematic approach is also the most common structure in narrative literature reviews vs systematic reviews . ## 2. Compare Methodologies When two studies disagree, do not just report the disagreement. Dig into why they disagree. Was one cross-sectional and the other longitudinal? Did one use self-reported data while the other used app-tracked usage? Explaining methodological differences is one of the fastest ways to show your professor you actually read the papers, and it almost always earns higher marks. ## 3. Identify and Name the Gap Every literature review exists to justify your research question. The best way to do that is to explicitly name what the existing research has not done. In the example, the gap is the lack of research on specific social media activities. Naming the gap creates a logical bridge from your review to your methodology section. ## Copy-Paste Template for Your Literature Review Paragraph Use this template the next time you sit down to write a literature review paragraph. Fill in the brackets with your own content. [Theme/claim this paragraph addresses]. [Author, Year] [method and sample] found that [key finding]. Similarly, [Author, Year] [different method or population] reported [corroborating result], suggesting that [brief synthesis of what these studies share]. However, [Author, Year] challenged this view by [contrary finding or methodological critique]. This discrepancy may reflect [explanation: different methods, populations, definitions, or timeframes]. Taken together, the evidence indicates that [balanced conclusion]. Further research is needed to [specific gap], which is the focus of the present study. ## Want to See How Your Own Papers Fit Together? Upload your reference papers and ask Litrevu what they say. See the themes across your library, compare methods side by side when two studies disagree, and open each citation to the passage it came from. Litrevu supports all 6 major citation styles including APA , MLA, and Harvard. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Try Litrevu Free Free to start. No credit card required. ## Related Guides - How to Write a Literature Review (Step-by-Step Guide for 2026) - Literature Review vs Systematic Review: What's the Difference? - Can AI Write a Literature Review? What You Need to Know (2026) - Litrevu for Literature Reviews --- # Literature Review vs Systematic Review: What's the Difference? URL: https://litrevu.com/blog/literature-review-vs-systematic-review Category: Literature Review Published: 2026-04-19 Summary: A clear breakdown of the differences between a literature review and a systematic review. When to use each, and how they're structured. ← Back to blog ## Literature Review vs Systematic Review: What’s the Difference? By Wasim Ghoor · 19 April 2026 · 6 min read Quick answer A literature review summarizes and synthesizes existing research on a topic. A systematic review follows a strict, reproducible methodology to find and analyze all relevant studies. The first is flexible and interpretive; the second is rigid and exhaustive. If your supervisor just told you to “write a literature review,” you might be wondering whether that’s the same thing as a systematic review. Short answer: no. They share a family resemblance, but they serve different purposes, follow different rules, and show up in very different contexts. Let’s break down exactly what separates them, when you need each one, and whether there’s any middle ground. ## Side-by-Side Comparison Feature Literature Review Systematic Review Purpose Summarize and synthesize existing research Answer a specific research question using all available evidence Search strategy Selective, author chooses sources Exhaustive, predefined databases, search strings, inclusion/exclusion criteria Reproducibility Low, subjective selection High, protocol registered in advance Bias assessment Not required Formal quality appraisal of each study Analysis Narrative synthesis May include meta-analysis (statistical pooling) Timeline Weeks to a few months 6–18 months typical Team size Usually one author Minimum two reviewers (often more) Common in Theses, dissertations, research papers Medical journals, Cochrane, evidence-based policy ## When You Need a Literature Review A traditional (or “narrative”) literature review is what most students encounter first. You’re expected to read widely, identify themes, and weave the existing research into a coherent story that sets up your own study. You’ll write one when you’re working on: - Thesis or dissertation chapters. Almost every graduate program requires a standalone literature review chapter before you collect data. Need a step-by-step walkthrough? See our complete guide to writing a literature review . - Research papers. The introduction section of a journal article typically contains a condensed literature review that frames your contribution. - Grant proposals. Funders want to see that you understand what’s already been done and where the gaps are. - Course assignments. Professors assign standalone lit reviews to teach critical reading and synthesis skills. The key advantage? Flexibility. You can organize thematically, chronologically, or methodologically. You choose which papers to include based on relevance, not a rigid protocol. ## When You Need a Systematic Review A systematic review is a research method in its own right. It starts with a registered protocol, uses predefined search strings across multiple databases, and applies strict inclusion/exclusion criteria so that another researcher could replicate your exact search tomorrow and get the same results. You’ll encounter them in: - Medical and clinical research. Cochrane reviews are the gold standard. Treatment guidelines are built on them. - Evidence-based policy. Government agencies and NGOs commission systematic reviews to inform policy decisions. - PhD-level research. Some doctoral programs (especially in health sciences) require a full systematic review as one of the thesis chapters. - Meta-analyses. If you’re statistically pooling results from multiple studies, you need a systematic search first. The tradeoff is time and effort. A well-done systematic review takes months. You’ll screen hundreds (sometimes thousands) of abstracts, and you’ll need at least one other reviewer to reduce selection bias. ## Can You Combine Them? Yes, and people do it more often than you’d think. There’s a spectrum between a fully narrative lit review and a fully systematic one. - Scoping reviews use systematic search methods but don’t do formal quality appraisal. They’re great for mapping what research exists on a broad topic. - Narrative systematic reviews follow a reproducible search protocol but synthesize findings narratively rather than statistically. Useful when studies are too heterogeneous for meta-analysis. - Rapid reviews use streamlined systematic methods (fewer databases, one reviewer) to deliver results faster. Common in policy settings with tight deadlines. If your supervisor hasn’t specified, ask. In most cases, especially at the master’s level, they want a narrative literature review, not a full systematic review. Writing a narrative literature review? Litrevu reads your uploaded papers and shows the themes they share, each answer linked to its passage. Free to start, no credit card. Try Litrevu free ## How Each Is Structured Differently Structure is one of the easiest ways to tell the two apart at a glance. ## Literature review structure - Introduction : defines the scope and purpose of the review - Thematic / chronological body : groups studies by theme, methodology, or time period - Synthesis and gaps : pulls threads together and identifies what’s missing - Conclusion : connects the review to your own research question You can see this structure in practice in our annotated literature review example . ## Systematic review structure - Background : justifies the need for the review - Methods : search strategy, databases, date range, inclusion/exclusion criteria, quality assessment tools - PRISMA flow diagram : visual summary of records screened, excluded, and included - Results : characteristics of included studies and synthesized findings - Discussion : interpretation, limitations, implications Notice the difference? A systematic review reads more like a standalone research paper. A literature review reads more like an analytical essay. ## The Bottom Line If you’re a student writing a thesis chapter or research paper, you almost certainly need a literature review . It’s faster, more flexible, and designed to set the stage for your own study. Once you have your structure, make sure your citations are formatted correctly , it is one of the most common reasons supervisors send drafts back. If you’re conducting clinical research or building an evidence base for policy, you need a systematic review . It’s slower and more resource-intensive, but it produces evidence you can trust. When in doubt, check your program guidelines or ask your supervisor directly. The last thing you want is to spend six months on a systematic review when a well-written narrative review was all that was needed. ## Writing a literature review for your thesis? Upload the papers you have gathered and ask Litrevu what they say. See the themes across your library, compare studies side by side on aim, design, sample and findings, and open every citation to the passage it came from. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Try it free ## Related Guides - How to Write a Literature Review (Step-by-Step Guide for 2026) - Literature Review Example: Annotated Sample You Can Follow - How to Write a Methodology Section (Complete Guide with Examples) - Litrevu for Literature Reviews --- # How to Turn Your Research Papers into a Literature Review (2026 Guide) URL: https://litrevu.com/blog/how-to-turn-papers-into-literature-review Category: AI & Research Writing Published: 2026-04-19 Summary: The step-by-step process for turning a pile of PDFs into a structured, cited literature review. Covers source matrices, thematic synthesis, and where AI tools help. Guides ## How to Turn Your Research Papers into a Literature Review By Samuel de Bruyn · 19 April 2026 · 12 min read You collected the PDFs. You read (most of) them. Now you need to turn that pile of papers into a coherent, cited literature review. Here is the exact process. You have 30 PDFs open. Your supervisor wants a literature review by Friday. You've read the papers, or at least skimmed them, but you have no idea how to turn them into something coherent. Sound familiar? You are not alone. This is the single most common pain point graduate students describe when they talk about writing a literature review. The reading part is manageable. The “turning reading into writing” part is where everything falls apart. The problem is not laziness or lack of understanding. The problem is that nobody teaches you the actual process of transforming a collection of individual papers into a unified, thematic argument with proper citations. You are expected to just… figure it out. This guide walks you through that process, step by step. No academic jargon. No vague advice like “synthesize your sources.” Concrete steps you can follow tonight. ## Why Turning Papers into a Literature Review Is So Hard There is a fundamental gap between reading research papers and writing a literature review. Reading is passive and linear , you go through one paper at a time. A literature review demands something completely different: you need to think across papers simultaneously. A literature review is not a series of summaries. It is not “Paper A found X, Paper B found Y, Paper C found Z.” That is an annotated bibliography, and it will get sent back to you with red ink. A real literature review does three things that summaries do not: - Identifies patterns. What do multiple papers agree on? Where is there consensus in the field? - Surfaces contradictions. Where do researchers disagree? What are the competing explanations? - Reveals gaps. What has nobody studied yet? What questions remain unanswered? That mental shift, from “what does each paper say” to “what does this body of literature tell us”, is the hard part. The rest is process. ## Step 1: Read and Annotate Strategically You do not need to read every paper from the first word to the last. That is one of the biggest time traps students fall into. For the purpose of a literature review, you need to extract specific information from each paper, not memorize it. For each paper, focus on these sections: - Abstract: Gives you the main finding and methodology in 250 words. - Introduction: Tells you how the authors position their work within the existing literature. - Results / Findings: The actual data and outcomes. - Conclusion: The authors' interpretation and acknowledged limitations. As you read, annotate with these four questions in mind: Annotation questions to ask for every paper: - What is the main finding or argument? - What methodology did they use? - How does this relate to my research question? - Does this agree or disagree with other papers I've read? Write your answers directly in the PDF margins or in a separate notes document. You will need these later. This kind of targeted reading takes 15 to 20 minutes per paper. For 25 papers, that is about 6 to 8 hours, not the 40+ hours it takes if you read everything cover to cover. ## Step 2: Create a Source Matrix A source matrix (sometimes called a literature matrix or synthesis matrix) is the single most useful tool for turning papers into a literature review. It is a spreadsheet where your papers are rows and your themes are columns. The matrix forces you to think thematically instead of paper-by-paper. When you fill it in, you start seeing patterns across your sources without even trying. Here is a simplified example for a review on “AI in healthcare diagnostics”: Example: Source Matrix Paper Accuracy Trust / Adoption Ethical Concerns Chen et al. (2024) 94% accuracy on X-ray classification Not addressed Mentions bias in training data Patel & Singh (2023) Comparable to radiologists Clinicians skeptical of black-box models Not addressed Williams (2024) Not addressed Surveys show 62% of doctors want AI assistance Calls for regulatory frameworks Nakamura et al. (2025) 97% on pathology slides Trust increases with explainability Data privacy concerns You can create this in Google Sheets, Excel, Notion, or even on paper. The format does not matter. What matters is that you fill it in for every paper. Once your matrix is complete, the themes for your literature review are staring you in the face. They are literally the column headers. ## Step 3: Identify Themes and Patterns With your source matrix filled in, look down each column. What patterns emerge? - Do most papers in the “Accuracy” column report similar results? That is a consensus you can describe. - Do papers in “Trust / Adoption” contradict each other? That is a debate you need to present. - Is the “Ethical Concerns” column mostly empty? That might be a gap in the literature. This is the critical step where most students go wrong. Instead of looking across papers for patterns, they write about papers one at a time. The matrix prevents that by literally forcing you to think in columns (themes) instead of rows (papers). At this point, you should be able to write a rough outline. Each theme becomes a section or subsection of your literature review. Under each theme, note which papers you will cite and what point they support. Example outline from the matrix above: - Diagnostic accuracy of AI models , Chen et al., Patel & Singh, Nakamura et al. - Clinician trust and adoption barriers , Patel & Singh, Williams, Nakamura et al. - Ethical and regulatory considerations , Chen et al., Williams, Nakamura et al. - Gaps in the literature , your synthesis of what is missing Notice how each section draws from multiple papers. That is synthesis. That is what your supervisor wants to see. ## Step 4: Write Thematically, Not Paper by Paper This is where the actual writing happens, and it is the step that separates a passing literature review from a good one. You need to write about themes, not about individual papers. Let me show you the difference. Paper-by-paper summary (bad): “Chen et al. (2024) used a deep learning model to classify X-ray images and achieved 94% accuracy. Patel and Singh (2023) also studied AI diagnostics and found results comparable to radiologists. Nakamura et al. (2025) examined pathology slides and reported 97% accuracy.” Thematic synthesis (good): “Recent studies consistently demonstrate that AI diagnostic models achieve accuracy levels comparable to or exceeding those of human specialists. Deep learning classifiers have reached 94% accuracy on chest X-ray interpretation (Chen et al., 2024) and 97% on pathology slide analysis (Nakamura et al., 2025), with performance matching that of experienced radiologists in controlled settings (Patel & Singh, 2023). However, these results are typically reported under laboratory conditions, and real-world clinical performance remains less well documented.” See the difference? The first version is three separate statements about three separate papers. The second version makes a single argument, that AI accuracy is consistently high , and uses all three papers as evidence for that argument. It also adds a critical observation at the end (the lab-vs-real-world gap). When you write thematically, each paragraph should follow this pattern: - Topic sentence , state the theme or claim. - Evidence , cite 2 to 4 sources that support the claim. - Critical analysis , note limitations, contradictions, or nuances. - Transition , connect to the next paragraph or theme. If you follow this structure for every paragraph, your literature review will be thematic by default. Litrevu helps you find what goes into each theme. Upload your PDFs and ask Litrevu what they say about a theme: which papers address it, where they agree, and where they disagree. Every answer cites the passage it came from, and every citation opens to that passage in a paper you uploaded, so you can read it before you use it. The paragraphs are yours to write. Once you have written one, paste it in and see which of its claims your papers back. Free to start, no credit card required. Try it free with your papers ## Step 5: Integrate Citations Properly Good citation integration is what makes a literature review feel like a piece of writing instead of a list of references. There are a few techniques that make a big difference. ## Cite multiple sources in a single sentence When several papers support the same point, group them together. This is one of the clearest signals of synthesis. Instead of: “Smith (2022) found that X is effective. Jones (2023) also found that X is effective.” Write: “Multiple studies have demonstrated the effectiveness of X (Smith, 2022; Jones, 2023; Lee et al., 2024).” ## Paraphrase more than you quote A literature review should be written almost entirely in your own words. Direct quotations should be rare, save them for definitions, coined terms, or particularly impactful phrasing. Everything else should be paraphrased and cited. A good rule of thumb: no more than one direct quote per 500 words of literature review. ## Handle conflicting sources explicitly When two papers disagree, do not hide the conflict. Present both sides and, if possible, explain why the disagreement exists (different methodology, different sample, different context). Example: “While Chen et al. (2024) reported minimal bias in AI-generated diagnoses, a larger multi-site study by Thompson and Rivera (2025) found significant demographic disparities in model performance, particularly among underrepresented populations. This discrepancy may reflect differences in training data diversity between the two studies.” Acknowledging contradictions makes your review more credible, not less. It shows you are engaging critically with the literature, which is exactly what your supervisor wants to see. For a detailed comparison of how citations work across APA , MLA, Chicago, IEEE, Harvard, and Vancouver formats, see our guide to citing sources in a research paper . ## Step 6: Write Transitions Between Themes A common problem with thematic literature reviews is that they read like a list of disconnected sections. Each theme is well-written on its own, but there is no sense of narrative flow from one to the next. The fix is surprisingly simple: add one or two sentences at the end of each section that bridge to the next theme. Example transition: “While the literature demonstrates that AI diagnostic models achieve high accuracy under controlled conditions, accuracy alone does not determine clinical adoption. The following section examines the barriers to clinician trust and uptake of AI-assisted diagnostics.” These transitions do two things. First, they summarize what you just covered. Second, they preview what comes next. This turns your literature review into a narrative instead of a series of disconnected blocks. A practical strategy: write all your body paragraphs first, then go back and add transitions in a separate editing pass. Trying to write transitions and body content simultaneously often leads to writer's block. ## How Long Does This Process Take? Let me be honest. Turning 20 to 30 papers into a quality literature review takes significant time, no matter how you approach it. Here are realistic estimates for the process described in this guide: Strategic reading and annotation (25 papers) 6 – 10 hours Building the source matrix 3 – 5 hours Identifying themes and outlining 2 – 4 hours Writing the first draft 15 – 25 hours Revising and polishing 10 – 20 hours Total (manual process) 40 – 80 hours AI assistance does not remove most of this. A research assistant that reads your papers can help you find what each one says, line studies up for your matrix, and check your own paragraphs against your sources. You still need to do the reading that matters, decide the themes, and write the review. There is no shortcut for actually understanding the literature. AI fits best in the mechanical steps: finding which papers discuss a concept, pulling the same details out of every study, and keeping references formatted. The writing itself is the step many university AI policies reserve for you, so check yours before you hand any of it over. ## Can AI Help Turn Papers into a Literature Review? Yes, but with important caveats. Let me be specific about what AI tools can and cannot do here, because there is a lot of hype and not enough honesty. ## What general AI tools (ChatGPT, Claude) can do General-purpose AI chatbots can help you brainstorm themes, draft outlines, and improve your writing style. They are useful as thinking partners. What they cannot do is cite your actual sources accurately. If you paste a paper into ChatGPT and ask it to write a literature review, you will get something that looks plausible but may contain hallucinated references, citations to papers that do not exist or misattributed findings. This is a serious academic integrity risk. ## What RAG-based tools can do RAG (retrieval-augmented generation) tools work differently. Instead of generating text from general knowledge, they retrieve information from documents you provide and generate text grounded in those specific sources. This is the approach Litrevu uses. You upload your PDFs, and the system reads, chunks, and indexes them. When you ask a question, it finds the passages that bear on it and answers with a citation to each one, and every citation opens to a passage in a paper you uploaded. That removes one kind of error: a citation to a paper that does not exist, because the system can only cite papers in your library. It does not remove the other kind. A real passage can still be summarised badly, so open it and read it before you rely on the answer. ## What you still need to do yourself No AI tool replaces the intellectual work of a literature review. Here is what stays firmly on your plate: - Reading the papers. You need to understand what your sources actually say. An AI can synthesize text, but you need to verify that the synthesis is accurate and fair. - Guiding the topic and scope. You decide the research question, the themes, and the boundaries of your review. - Critical evaluation. You need to assess whether the papers you are citing are methodologically sound and relevant. - Writing the review. The argument and the prose are yours. Many universities do not allow AI-written text in submitted work, even after you edit it, so check your institution's policy, write your own text, and declare how you used AI. Think of AI as a research assistant, not a replacement for your brain. It can handle the mechanical parts (finding the passage behind a point, lining studies up side by side, formatting citations) so you can focus on the intellectual parts. ## How Litrevu Compares to Other Research Tools These tools mostly solve different problems. Three of the four below help you find and evaluate papers. Litrevu starts after that, when you have the papers and need to understand them: it answers questions about your papers, compares them and checks your own writing against them. Elicit is the one with real overlap. Comparison of Litrevu, Elicit, Consensus, Scite and Research Rabbit by what each is best for, what it works from, what it outputs, and where each beats Litrevu. Tool Best for Works from What you get Where it beats Litrevu Litrevu Understanding, comparing and checking the papers you have already chosen PDFs you add, plus open-access papers you pick from an OpenAlex search Answers that cite the passage they came from, side-by-side comparison tables, and a check of your own writing against your papers Only a basic open-access search, no screening at scale, no view on whether a source is contested Elicit Finding papers and extracting structured data from them 138M paper corpus, and PDFs you upload Reports, tables, summaries and structured comparisons Far larger discovery corpus, systematic review screening into the thousands, purpose-built data extraction tables Consensus Answering an empirical yes or no question across the literature 200M+ peer-reviewed papers Synthesised answer with a meter showing how much of the literature agrees Answers questions across all published work in seconds; nothing in Litrevu does this Scite Checking whether a paper has been supported or contradicted since 1.6B+ classified citation statements Citation contexts labelled supporting, contrasting or mentioning Tells you if a source is contested. Litrevu has no view on this at all Research Rabbit Exploring outward from one paper to find related work Citation graph Visual networks of related papers, authors and topics Visual citation-graph discovery; Litrevu offers nothing comparable The honest split: if you do not yet have your papers, Elicit, Consensus and Research Rabbit will get you there faster than Litrevu can. Litrevu's only discovery is an open-access search (OpenAlex) when you add sources, where you pick which papers to add; it cites only the papers in your library and does not search the web for citations. If you want to know whether a study you already cite has since been contradicted, Scite answers that and Litrevu does not. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Elicit also works from uploaded PDFs, so the real difference there is the shape of the work: Elicit produces reports, tables and structured comparisons, with a purpose-built extraction workflow, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Its comparison tables are built in chat for a handful of papers and are not an extraction workflow. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Comparison verified as of August 2026 against each vendor's own documentation. These products change quickly, so check the current feature list before deciding. ## Ask Your PDFs What They Say Before you write a word, see what your papers hold: the themes that run across them, where they agree and disagree, and the passage behind every point. Supports APA, MLA , Chicago, IEEE, Harvard, and Vancouver citation styles. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. It is free to start, enough to see what it finds in your own papers. No credit card required. One-time purchase starting at $8.49 if you want to keep going. You still read the papers, decide the argument, and write the review yourself. Litrevu helps you see what is in the pile, and check what you wrote against it. Try Litrevu free ## Related Guides - How to Write a Literature Review (Step-by-Step Guide for 2026) - Literature Review Example: Annotated Sample You Can Copy - Can AI Write a Literature Review? What You Need to Know (2026) - Litrevu for Literature Reviews --- # Can AI Write a Literature Review? What You Need to Know (2026) URL: https://litrevu.com/blog/can-ai-write-a-literature-review Category: AI & Research Writing Published: 2026-04-19 Summary: An honest breakdown of what AI can and can't do for your literature review. The hallucination problem, how RAG tools work, and how to use AI responsibly. Insights ## Can AI Write a Literature Review? What You Need to Know (2026) By Samuel de Bruyn · 19 April 2026 · 10 min read The short answer: yes, with major caveats. The real question is whether you should, and how to do it responsibly. If you're reading this, you're probably staring at a stack of papers and wondering how much of the work AI can take off your hands. Maybe you're two weeks from a deadline. Maybe you've already tried asking ChatGPT to write your lit review and got something that looked plausible but felt off. The honest answer is: AI can help, partially. It can handle a lot of the mechanical, time-consuming work that makes literature reviews so painful. But it cannot replace your brain. Not yet, and probably not for a while. This article breaks down what AI tools actually do, where they fail dangerously, and how to use them responsibly. We built Litrevu, so yes, we have a perspective, but we're going to be straight with you about the limitations too. ## What Most AI Tools Actually Do (and Why It's a Problem) When most people say “AI literature review,” they mean pasting their topic into ChatGPT, Claude, or a similar general-purpose language model and asking it to write a literature review. Here's what actually happens when you do that. The model generates text that reads like an academic literature review. It uses the right tone, the right structure, the right kind of hedging language. It even produces what look like in-text citations, author names, years, journal titles. The problem is that many of those citations are completely fabricated. General-purpose LLMs do not have access to a database of academic papers. They are not looking up sources and citing them. They are predicting what a plausible citation would look like based on patterns in their training data. Sometimes they get lucky and produce a real reference. Often they don't. This is not a minor inconvenience. In academic work, a fabricated citation is a serious integrity violation. Your supervisor will check. Your examiner will check. And when a reference doesn't exist, there is no way to explain it away. ## The Hallucination Problem, Explained “Hallucination” is the technical term for when an AI model generates information that sounds confident and specific but is entirely made up. In academic writing, this manifests as fake references, and they are disturbingly convincing. Here's what this looks like in practice: Hallucinated citation (generated by a general LLM) “According to Martinez and Chen (2023), transformer-based models show a 34% improvement in cross-lingual transfer tasks when fine-tuned on domain-specific corpora (Journal of Computational Linguistics, 41(2), pp. 112–128).” This paper does not exist. The authors, journal volume, and page numbers are all fabricated. But it looks completely real. Real citation (from an uploaded paper via RAG) “Devlin et al. (2019) introduced BERT, demonstrating that bidirectional pre-training significantly improves performance across a range of NLP benchmarks.” This reference exists because the AI retrieved the claim directly from a paper the user uploaded. The first example is the kind of output you get from ChatGPT or similar tools. It follows the pattern of a real citation perfectly. Unless you manually search for that exact paper, you might never catch it. Professors know this. Many now run spot-checks on student references. Some universities have started treating unverifiable citations as academic misconduct, regardless of whether the student knew they were fake. This is the core reason general-purpose AI tools are risky for literature reviews. The text quality might be fine. The citations are the landmine. ## How RAG-Based Tools Work Differently RAG stands for Retrieval-Augmented Generation. It is a different approach to using AI for writing, and it narrows the hallucination problem in a specific way. Here is how it works, in plain terms: - You upload your papers. The PDFs you have already collected for your research , the ones you found on Google Scholar, your university database, or wherever. - The system reads and indexes them. Each paper is broken into chunks and converted into vector embeddings (a way of representing text numerically so the system can search through it efficiently). - When you ask a question, the system retrieves relevant passages. Instead of answering from memory, it searches through your actual papers to find the claims, findings, and arguments that are relevant to your research question. - The AI answers from those passages, citing each one. Each citation points back to a specific passage in a specific paper you uploaded, so you can open it and read what the authors actually said. The key difference: a RAG-based tool can only cite papers you have given it. It retrieves references from your documents rather than recalling them from memory, so it should not invent a paper, but it can still cite a passage that does not fully support the sentence. Open the passage and check. This is how Litrevu works: you add your PDFs, ask what they say about your research question, and every answer cites the passage it came from, which you can open and read word for word. You can also compare studies side by side and check a paragraph you wrote against your papers. It formats references in APA , MLA, Chicago, IEEE, Harvard, and Vancouver citation styles. Does this mean it is perfect? No. You still need to verify that the citations accurately represent the original authors' arguments. The AI might misinterpret a nuance or over-generalize a finding. But the references themselves are real, and they point to real text. That is a fundamentally different starting point than hoping ChatGPT guessed correctly. Writing a literature review right now? Ask your papers anything, compare studies side by side and check your writing against your sources. Every citation opens the passage it came from. Free to start. No card needed. What's your research topic? Find papers on it ## What AI Can Do for Your Literature Review When used correctly, meaning with a RAG-based approach and your own source papers, AI is genuinely useful for several parts of the literature review process: - Structure your review thematically. Instead of summarizing papers one by one, AI can organize findings across multiple papers into coherent themes , theoretical background, related work, research gaps, and synthesis. - Synthesize findings across sources. This is the part students struggle with most. AI can identify where authors agree, where they disagree, and where the conversation in the field is headed. - Format citations in six styles. APA, MLA, Chicago, IEEE, Harvard, Vancouver. Formatting citations correctly is tedious work that AI handles well. - Find the passage behind a claim. Ask what your papers say about a point and get an answer that cites the exact passage, so you can read it yourself before you rely on it. The same check works on your own writing: which of your claims do your sources actually back? - Handle the organizational heavy lifting. Grouping sources, mapping themes, formatting references, ensuring consistency, these are tasks that eat up time without requiring deep thinking. AI is good at them. Think of it this way: AI excels at the parts of writing a literature review that feel like data entry. It struggles with the parts that feel like thinking. ## What AI Cannot Do (and What You Still Need to Do) This is the section most AI text generators do not want you to read. We think it is the most important part of this article. AI cannot: - Replace reading and understanding the papers. If you do not understand the sources, you cannot evaluate whether the AI's synthesis is accurate. You are the quality control. - Make original scholarly arguments. A literature review is not just a summary of what others have said. It is your argument about where the field stands and where it needs to go. AI does not have your perspective. - Evaluate methodology quality. Was the sample size adequate? Was the study design appropriate for the research question? These are judgments that require domain expertise. - Know your specific assignment requirements. Every course, every supervisor, every institution has different expectations. AI does not know that your professor wants a chronological structure or that your department requires a specific subheading format. - Do the critical thinking. Identifying gaps, questioning assumptions, connecting disparate findings to your own research question, this is the intellectual work that makes a literature review valuable. What you still need to do: - Read the papers yourself. At minimum, abstracts, introductions, and conclusions. - Guide the topic and research question. The AI follows your direction, it does not set it. - Write the text you submit yourself. Many universities treat AI-written text as AI-written even after you edit it. - Verify that citations match your understanding of the source material. - Own the argument. Your voice, your analysis, your conclusions. If you skip these steps, you are not using AI as a tool. You are outsourcing your education. That will not end well, regardless of which tool you use. ## Built for Exactly This Workflow Litrevu is a RAG-based assistant for writing backed by sources, built for the workflow described above. Add your PDFs, ask what they say about your research question, and open any citation to read the passage behind it. Compare studies side by side, or paste a paragraph you wrote and see which claims your papers back. You do the thinking and the writing. Litrevu helps you read, find and check. It is free to start, no credit card required. Try it free ## Is Using AI for a Literature Review Cheating? This is the question everyone is thinking and few people ask directly. So let's address it. The answer depends entirely on your institution's policy, how you use the tool, and whether you are transparent about it. Most universities are still developing their AI policies. Some have banned all AI-generated text. Some allow AI for brainstorming and outlining but not for final submissions. Some permit AI-assisted drafting as long as you disclose it. Many treat text an AI wrote as AI-written even after you have edited it. There is no universal standard yet. Here is a useful way to think about it. Consider the tools students already use: - Grammarly rewrites your sentences for clarity and grammar. - Zotero and Mendeley auto-generate your reference list. - Research assistants (in well-funded labs) often help with literature searches and note-taking. - Writing centers review and suggest structural changes to your draft. AI tools sit somewhere on this spectrum. The key distinctions are: Did you guide the work? Did you understand the sources? Did you write the submitted text yourself? Did you declare how you used AI? Many university AI policies allow AI as a study aid: for reading, searching and summarising your sources, often with a declaration. That is what Litrevu is built for. What they forbid is submitting AI-written text as your own, and at many universities that includes text you have edited. Litrevu can also draft cited text into a document, and that rule covers it. Check your institution's policy, write your own text, and declare how you used Litrevu. The non-negotiable rule: Always check your university's AI use policy before using any AI tool for academic work. If your institution requires disclosure, disclose it. If they prohibit it, do not use it. No tool, including Litrevu, is worth an academic integrity violation. ## How to Use AI Responsibly for Academic Writing If your institution permits AI as a study aid, here are five practical guidelines for using it responsibly: ## 1. Read your sources first Do not upload papers you have never opened. You need to understand the material before you can evaluate whether the AI's synthesis is accurate. At minimum, read each paper's abstract, introduction, and conclusion. ## 2. Use AI to read and check, not to write what you submit Ask your papers questions, compare their methods and findings, and plan your themes with AI. If a tool drafts text for you, check that your university allows it and declare it. The sentences you hand in should be ones you wrote. ## 3. Verify every citation Even with RAG-based tools that cite real papers, check that the citation accurately represents the original author's argument. Did the source actually say what the AI claims it said? Is the nuance preserved? This step is non-negotiable. ## 4. Write it yourself, in your own voice Editing AI text does not make it yours: many universities treat AI-written text as AI-written even after it has been reworded. Write your own analysis and connections between sources, in a structure that matches your specific argument. The goal is a review you could defend in a conversation with your supervisor, because you understand and agree with every sentence. ## 5. Disclose AI use if required by your institution Many universities now require a statement about AI tool usage. Even if yours does not, consider being transparent about it. “I used Litrevu, an AI tool that answers from my own papers, to search and summarise the papers I had collected and to locate the passages I cite. All analysis and writing are my own” is a clear disclosure of a use many policies permit. Our free AI disclosure statement generator, linked at the end of this page, gives you the wording in your university's format. ## The Bottom Line AI can write a literature review in the same way a calculator can solve a math problem. It handles the mechanical computation, but it does not understand what the numbers mean. You still need to set up the problem, interpret the results, and explain why it matters. For the mechanical parts of a literature review, finding where your sources discuss a point, organizing them thematically, comparing their methods and formatting citations, AI is genuinely useful. That is real, meaningful help. For the intellectual parts, understanding the sources, making original arguments, identifying gaps, connecting findings to your research question, AI cannot help you. That is your job, and it is the part that actually matters for your degree. The best approach: use AI to read, find, compare and check. Bring your own analysis, voice, writing and critical thinking. And always, always check the citations. ## How Litrevu Compares to Other Research Tools These tools mostly solve different problems. Three of the four below help you find and evaluate papers. Litrevu starts after that, when you have the papers and need to understand them: it answers questions about your papers, compares them and checks your own writing against them. Elicit is the one with real overlap. Comparison of Litrevu, Elicit, Consensus, Scite and Research Rabbit by what each is best for, what it works from, what it outputs, and where each beats Litrevu. Tool Best for Works from What you get Where it beats Litrevu Litrevu Understanding, comparing and checking the papers you have already chosen PDFs you add, plus open-access papers you pick from an OpenAlex search Answers that cite the passage they came from, side-by-side comparison tables, and a check of your own writing against your papers Only a basic open-access search, no screening at scale, no view on whether a source is contested Elicit Finding papers and extracting structured data from them 138M paper corpus, and PDFs you upload Reports, tables, summaries and structured comparisons Far larger discovery corpus, systematic review screening into the thousands, purpose-built data extraction tables Consensus Answering an empirical yes or no question across the literature 200M+ peer-reviewed papers Synthesised answer with a meter showing how much of the literature agrees Answers questions across all published work in seconds; nothing in Litrevu does this Scite Checking whether a paper has been supported or contradicted since 1.6B+ classified citation statements Citation contexts labelled supporting, contrasting or mentioning Tells you if a source is contested. Litrevu has no view on this at all Research Rabbit Exploring outward from one paper to find related work Citation graph Visual networks of related papers, authors and topics Visual citation-graph discovery; Litrevu offers nothing comparable The honest split: if you do not yet have your papers, Elicit, Consensus and Research Rabbit will get you there faster than Litrevu can. Litrevu's only discovery is an open-access search (OpenAlex) when you add sources, where you pick which papers to add; it cites only the papers in your library and does not search the web for citations. If you want to know whether a study you already cite has since been contradicted, Scite answers that and Litrevu does not. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Elicit also works from uploaded PDFs, so the real difference there is the shape of the work: Elicit produces reports, tables and structured comparisons, with a purpose-built extraction workflow, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Its comparison tables are built in chat for a handful of papers and are not an extraction workflow. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Comparison verified as of August 2026 against each vendor's own documentation. These products change quickly, so check the current feature list before deciding. ## Ready to Try It? Add your papers. Ask Litrevu what they say about your research question. Open each citation to read the passage behind it, then write the review yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Free to start. No credit card required. One-time passes start at $8.49 for 7 days if you need more, not a subscription. Try Litrevu free ## Related Guides - How to Write a Literature Review (Step-by-Step Guide for 2026) - Literature Review Example: Annotated Sample You Can Follow - AI Detection Is Dead. Universities Are Switching to Process-Based Evaluation. --- # AI Detection Is Dead. Universities Are Switching to Process-Based Evaluation. URL: https://litrevu.com/blog/ai-detection-dead-process-based-evaluation Category: AI & Research Writing Published: 2026-04-19 Summary: Over 50 universities have disabled AI detection tools like Turnitin. Stanford found 61% of human-written essays by non-native speakers get flagged. Here's what's replacing it. Insights ## AI Detection Is Dead. Universities Are Switching to Process-Based Evaluation. By Samuel de Bruyn · 19 April 2026 · 5 min read In a Stanford study, seven AI detectors flagged 61% of essays by non-native English speakers as AI-written. Universities are pulling the plug. Here's what's replacing it and what it means for your thesis. In 2024, Australian Catholic University recorded nearly 6,000 alleged academic misconduct cases. About 90 percent were AI-related. After investigation, roughly a quarter were dismissed. Any case where Turnitin's AI detection tool was the sole evidence? Thrown out immediately. One student waited six months before the accusations were dropped. Her transcript was marked “results withheld” the entire time. It affected her chances of securing graduate positions. ACU eventually abandoned the Turnitin AI detector entirely. And they're far from alone. Curtin University disabled Turnitin's AI writing detection across all campuses from January 2026. Vanderbilt , Johns Hopkins , Yale and the University of Waterloo have all disabled or restricted Turnitin's AI detection feature. The reason is the same in every case: these tools don't work well enough to stake a student's academic career on. ## Why Are AI Detection Tools Flagging 61% of Human-Written Essays? AI detection tools promise to identify machine-generated text. In practice, they're flagging real students for work they actually wrote. Stanford ran the numbers. Researchers tested seven widely used GPT detectors on 91 TOEFL essays written by non-native English speakers and 88 essays by US-born eighth-graders. The detectors performed “near-perfectly” on the American students' essays. But they classified 61.22 percent of the TOEFL essays as AI-generated. Every single one of those essays was written by a real person. All seven detectors unanimously flagged 19.8 percent of those human-written essays as AI-authored. Not one detector got it right. Why? AI detectors measure two properties: perplexity (how surprising the word choices are) and burstiness (how much sentence structure varies). Non-native English speakers naturally use simpler vocabulary, shorter sentences and more formulaic structures. Those patterns look a lot like AI-generated text. The detectors can't tell the difference. But it's not just international students getting hit. A Common Sense Media study found that 20 percent of Black teens reported being falsely accused of using AI to complete an assignment. Compare that to 10 percent of Latino teens and 7 percent of white teens. Among those incorrectly flagged, 79 percent said their work had been submitted to AI detection software. These aren't just stats. There are real people behind them. NPR reported in December 2025 on Ailsa Ostovitz, a high school junior at Eleanor Roosevelt High School in Maryland. Accused of using AI three times across two different classes. In one case, her teacher showed her a screenshot: about a 30 percent probability she had used AI. The assignment? A description of the music she listens to. She lost points. After a meeting weeks later, the teacher said they no longer believed she had used AI. The school district later stated they advise educators not to rely on such tools, citing “potential inaccuracies and inconsistencies.” And then there's Turnitin's own numbers. They claim a false positive rate under 1 percent. A 2023 Washington Post investigation by Geoffrey Fowler found a misclassification rate closer to 50 percent. Smaller sample, but a massive gap. That disconnect between the company line and independent testing is a big part of why universities are walking away. ## What Universities Are Doing Instead So if they're ditching the detectors, are universities just giving up on academic integrity? No. They're changing how they evaluate it. It's called process-based evaluation. Instead of running a finished paper through detection software, they're looking at how the work was developed. In practice, this looks like three things: Draft trails. Students submit outlines, rough drafts and revision history. Shows they engaged with the material over time, not just pasted a finished product. Source accountability. Can you justify your citations ? Can you explain why you picked those sources and how they back up your argument? Way harder to fake than a polished paragraph. Oral checks. For theses and dissertations, some programs now include short oral components. Can you explain the choices you made? Can you discuss your methodology without reading from the paper? Think about it. If the goal is making sure students understand what they submitted, checking their process makes way more sense than running their output through a tool that flags non-native English speakers at six times the rate of native speakers. Curtin University's Academic Board said as much. They pointed to reliability concerns, equity issues with false positives for certain populations and a push to focus on education over surveillance. An AI assistant that shows its sources Litrevu reads the papers you add and answers your questions with the passage behind each claim. You choose the sources, read what they say and write the work yourself, so the process is yours to show. Try Litrevu free ## How Does This Affect Your Thesis? Most students haven't caught on to this yet. The old game was simple: write your paper, submit it, hope the detector doesn't flag it. That game is changing. Universities are moving toward a model where using AI isn't the violation. Hiding it is. Disclosure is becoming the baseline. Oxford now lets students use generative AI for studies and research as long as they declare it and the course allows it. Same story across most institutions now: be transparent or get in trouble. So what does this change for you? If you use ChatGPT to generate a literature review from scratch, you've got no process trail. No uploaded sources. No sign you engaged with the material. Nothing that shows your thinking. Under process-based evaluation, that's a problem. Not because a detector caught you, but because you can't show you understood any of it. Compare that to a different approach. You collect your own research papers and use a tool that answers questions about them, citing the passage behind each answer. You read those passages, decide what matters and write the review yourself. Your process is there from start to finish. You can point to the papers you collected. You can explain why you picked those sources. You can show the passages behind your claims and the drafts you wrote along the way. That's what process-based evaluation actually rewards. ## The Bottom Line The “paste into ChatGPT and pray” era is ending. Not because detectors got better, but because universities figured out they were asking the wrong question. The new question isn't “did a machine write this?” It's “does this student understand what they submitted?” If you actually engage with your research, that's a better system for you. ## How Litrevu Compares to Other Research Tools These tools mostly solve different problems. Three of the four below help you find and evaluate papers. Litrevu starts after that, when you have the papers and need to understand them: it answers questions about your papers, compares them and checks your own writing against them. Elicit is the one with real overlap. Comparison of Litrevu, Elicit, Consensus, Scite and Research Rabbit by what each is best for, what it works from, what it outputs, and where each beats Litrevu. Tool Best for Works from What you get Where it beats Litrevu Litrevu Understanding, comparing and checking the papers you have already chosen PDFs you add, plus open-access papers you pick from an OpenAlex search Answers that cite the passage they came from, side-by-side comparison tables, and a check of your own writing against your papers Only a basic open-access search, no screening at scale, no view on whether a source is contested Elicit Finding papers and extracting structured data from them 138M paper corpus, and PDFs you upload Reports, tables, summaries and structured comparisons Far larger discovery corpus, systematic review screening into the thousands, purpose-built data extraction tables Consensus Answering an empirical yes or no question across the literature 200M+ peer-reviewed papers Synthesised answer with a meter showing how much of the literature agrees Answers questions across all published work in seconds; nothing in Litrevu does this Scite Checking whether a paper has been supported or contradicted since 1.6B+ classified citation statements Citation contexts labelled supporting, contrasting or mentioning Tells you if a source is contested. Litrevu has no view on this at all Research Rabbit Exploring outward from one paper to find related work Citation graph Visual networks of related papers, authors and topics Visual citation-graph discovery; Litrevu offers nothing comparable The honest split: if you do not yet have your papers, Elicit, Consensus and Research Rabbit will get you there faster than Litrevu can. Litrevu's only discovery is an open-access search (OpenAlex) when you add sources, where you pick which papers to add; it cites only the papers in your library and does not search the web for citations. If you want to know whether a study you already cite has since been contradicted, Scite answers that and Litrevu does not. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Elicit also works from uploaded PDFs, so the real difference there is the shape of the work: Elicit produces reports, tables and structured comparisons, with a purpose-built extraction workflow, while Litrevu is a conversation with your own papers in which each citation opens to its passage. Its comparison tables are built in chat for a handful of papers and are not an extraction workflow. Litrevu can also draft cited text into a document; many universities do not allow AI-written text in submitted work, even after you edit it, so check your policy and declare how you used it. Comparison verified as of August 2026 against each vendor's own documentation. These products change quickly, so check the current feature list before deciding. ## Working on a Thesis? Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. You choose the sources, read what they say and write the thesis yourself. Try it free, no credit card. Try Litrevu free ## Related Articles - Can AI Write a Literature Review? What You Need to Know (2026) - How to Write a Literature Review (Step-by-Step Guide for 2026) - How to Turn Your Research Papers into a Literature Review --- # 10 Common Literature Review Mistakes (and How to Avoid Them) URL: https://litrevu.com/blog/common-literature-review-mistakes Category: Literature Review Published: 2026-04-20 Summary: The most frequent mistakes students make in literature reviews: from summarizing instead of synthesizing to missing key sources. Learn what to avoid and how to fix each one. Guides ## 10 Common Literature Review Mistakes (And How to Avoid Them) By Wasim Ghoor · 20 April 2026 · 9 min read The literature review is where most students lose the most marks. Here are the ten mistakes that come up over and over again, and exactly how to fix each one. Writing a literature review is hard enough without sabotaging yourself with avoidable errors. But that is exactly what happens to most students. They pour hours into reading and writing, only to get their draft back covered in red ink. The frustrating part? Almost every literature review that gets sent back for revision fails for the same handful of reasons. These are not obscure, niche problems. They are predictable, fixable mistakes that show up in undergraduate papers and PhD dissertations alike. Student literature reviews tend to go wrong in the same ten ways. Here is what they are, why they happen, and what you can do about each one. ## 1. Not Reading Enough Sources This is the most fundamental mistake, and it usually comes down to time pressure. Students find five or six papers, read them, and start writing. The result is a literature review that feels thin and incomplete. A literature review is supposed to represent the state of knowledge in your field. If you have only read a handful of papers, you cannot credibly claim to know what the field looks like. How to fix it: Set a minimum source count before you start writing. For an undergraduate paper, aim for 10 to 15 sources. For a master's thesis, 25 to 40. For a PhD, 50 or more. You do not need to read every paper in full. Read the abstract, introduction, and conclusion first. Only deep-read the papers that are directly relevant to your argument. Also, do not stop searching after your first database query. Use multiple databases, try different keyword combinations, and follow citation trails. The best sources are often two or three clicks away from the obvious ones. ## 2. Summarizing Instead of Synthesizing This is the single most common criticism supervisors write on literature review drafts. It usually looks like this: “Smith (2021) found X. Johnson (2022) found Y. Patel (2023) found Z.” Each paper gets its own paragraph, and the student moves through them one by one like a book report. A summary tells the reader what each paper says. A synthesis tells the reader what the papers mean together. The difference is critical. Summary vs. synthesis: - Summary: “Lee (2020) surveyed 200 teachers and found that 68% used technology weekly. Brown (2021) found similar adoption rates in a study of 150 teachers.” - Synthesis: “Multiple studies confirm high technology adoption rates among K-12 teachers, with weekly usage reported by 60-70% of respondents across different contexts (Lee, 2020; Brown, 2021). However, adoption rates alone may obscure significant variation in how effectively technology is integrated into instruction.” How to fix it: Organize your review by theme, not by paper. Each paragraph should make a claim, then support that claim with evidence from multiple sources. If you find yourself spending an entire paragraph on one paper, you are summarizing. ## 3. Poor Organization and Structure A literature review that jumps randomly between topics is painful to read. Your supervisor should be able to follow a clear, logical thread from the first section to the last. If they cannot, the review feels scattered, even if the content itself is good. Poor structure usually happens when students start writing before they have an outline. They add papers as they read them, and the review grows organically without any overarching plan. How to fix it: Choose a structure before you write a single paragraph. The three most common approaches are thematic (by topic), chronological (by time period), and methodological (by research method). For most students, thematic works best. Create a rough outline with 3 to 5 main themes. Under each theme, list the papers that belong there. Some papers will appear under multiple themes, and that is fine. The outline gives you a map. Without it, you are driving blind. ## 4. Ignoring Contradictory Evidence It is tempting to only include studies that support your hypothesis. But a one-sided literature review is a weak literature review. Your supervisor will notice the omissions, and so will anyone familiar with your field. Contradictory evidence is not a problem. It is an opportunity. Disagreements in the literature are where research gaps live, and research gaps are what justify your study. How to fix it: Actively search for studies that challenge your assumptions. When you find them, include them and explain the contradiction. Did the studies use different methods? Different populations? Different definitions of key terms? Discussing these differences shows critical thinking and strengthens your credibility. ## 5. Outdated Sources If most of your sources are from 2010 or earlier, you have a problem. Research moves fast, and your literature review should reflect the current state of the conversation. Using mostly older sources signals to your reader that you have not engaged with recent work. There are exceptions. Foundational or seminal works from decades ago are perfectly acceptable and often necessary. Piaget's developmental theory, Shannon's information theory, or Kahneman and Tversky's prospect theory are all examples of older works that remain highly relevant. But these should be the minority of your sources, not the majority. How to fix it: Aim for at least 60 to 70 percent of your sources to be from the last 5 years. Use the date filters in Google Scholar or your university database to prioritize recent publications. When you do cite older works, make it clear why they are still relevant. Struggling with your literature review? Ask your papers where they agree and where they disagree, and see the passage behind each answer. Free to start, no credit card required. Try Litrevu free ## 6. No Clear Argument or Framework A literature review is not a neutral summary of everything that has been written about a topic. It is an argument. You are building a case for why your research question matters, and every paragraph should contribute to that case. Without a guiding argument, a literature review reads like a collection of loosely related notes. Your reader finishes it and thinks, “Okay, but so what?” How to fix it: Before you start writing, write a one-sentence answer to this question: “What is the main point I want my reader to take away from this literature review?” Everything you write should support that point. If a paragraph does not connect to your central argument, cut it or rewrite it until it does. Some students find it helpful to use a theoretical framework as an organizing principle. A framework gives you a lens through which to interpret the literature, which makes synthesis much easier. ## 7. Plagiarism and Poor Paraphrasing Plagiarism in a literature review is rarely intentional. More often, students paraphrase poorly: they swap a few words in a sentence, keep the same structure, and think they have paraphrased. They have not. This is called patchwriting, and plagiarism detection software catches it easily. The other common version is forgetting to cite. You read something, absorb the idea, and write it into your review without attribution. Weeks later, you have no idea which paper the idea came from. How to fix it: When paraphrasing, close the original paper and write the idea from memory in your own words. Then check the original to make sure you got the facts right. If you cannot explain the idea without looking at the original, you do not understand it well enough yet. Always cite as you write, not after. It is far easier to add citations in real time than to go back and match ideas to sources after the fact. Use a reference manager like Zotero or Mendeley to keep your sources organized. ## 8. Missing Key Studies in Your Field Every field has landmark papers that anyone working in the area is expected to know. If your literature review on machine learning does not cite foundational work on neural networks, or your review on educational psychology ignores Vygotsky, your supervisor will notice. Missing key studies is not just an omission. It suggests you have not done a thorough search, and it undermines confidence in the rest of your review. How to fix it: After your initial search, look at the reference lists of the most-cited papers in your area. Which papers appear over and over? Those are the ones you cannot afford to miss. Google Scholar's “Cited by” feature is invaluable here. Sort by citation count to find the most influential work. Also, ask your supervisor early on: “Are there any essential papers I should make sure to include?” This simple question can save you from embarrassing omissions. ## 9. Writing Without an Outline This mistake causes more wasted time than any other. Students sit down with a pile of papers and start writing from the top of the page. The result is a review that meanders, repeats itself, and often needs to be completely restructured. An outline takes 30 to 60 minutes to create. Skipping it costs you 5 to 10 hours of rewriting later. The math is simple. How to fix it: Create your outline before you write a single paragraph. List your main themes as headings. Under each heading, note the key papers and the point you want to make with them. Add transition notes between sections so you know how they connect. Simple outline template: - Theme 1: [Your point], supported by [Paper A, Paper B, Paper C] - Theme 2: [Your point], supported by [Paper D, Paper E] , contradicted by [Paper F] - Theme 3: [Your point], gap identified , justifies your study Your outline does not need to be detailed. Even a rough skeleton with bullet points will save you significant time and produce a more coherent final product. ## 10. Not Connecting to Your Research Question The entire point of a literature review is to situate your research within the existing body of work. If your reader finishes your review and cannot see how it relates to your research question, something has gone wrong. This usually happens when students include papers that are tangentially related to their topic but do not directly support their argument. The review becomes broad and unfocused. How to fix it: Write your research question at the top of every page you draft. For every paragraph you write, ask yourself: “How does this connect to my research question?” If you cannot answer that question clearly, the paragraph does not belong in your review. Your literature review should end with a clear statement of the gap your research will fill. This is the bridge between your review and your methodology. It answers the question every reader is thinking: “Why does this study need to exist?” ## Putting It All Together None of these mistakes are fatal. Every single one is fixable. The key is knowing what to look for when you revise your draft. Before you submit, run through this quick checklist: Am I synthesizing across sources, or just summarizing individual papers? Is my review organized around clear themes? Have I included contradictory evidence? Are my sources current? Does every paragraph connect back to my research question? Does my review end by identifying a gap that my study will address? If you can answer “yes” to all of those, you are in strong shape. If not, you now know exactly where to focus your revision effort. Need a step-by-step walkthrough of the entire process? Our complete guide to writing a literature review covers everything from source searching to final revision. ## Skip the Most Common Mistakes The hardest part of a literature review is turning a pile of papers into a structured, synthesized argument. That argument has to be yours, and so does the writing. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. In a literature review, it helps most with the synthesis problem. Ask how your papers group into themes and where they agree or disagree, and it shows the passage behind each claim, so you can organise your review by argument rather than source by source. Once you have written a paragraph, paste it in and see which of your claims your papers back. Free to start, no credit card. Try Litrevu free ## Related Guides - How to Write a Literature Review (Step-by-Step Guide for 2026) - Literature Review Example: Annotated Sample You Can Follow - Can AI Write a Literature Review? What Students Need to Know --- # Academic Sources: What Counts and How to Find Them URL: https://litrevu.com/blog/how-to-find-academic-sources Category: Getting Started Published: 2026-04-20 Summary: What counts as an academic source, with examples, and where to find them free: Google Scholar, library databases and citation chaining, step by step. Guides ## Academic Sources: What Counts and How to Find Them By Jessica McLaren · 20 April 2026 · 18 min read · Updated 27 October 2026 Academic sources are peer-reviewed journal articles, scholarly books, conference papers and theses written by researchers for other researchers. You find them in Google Scholar and your university library’s databases, then find more by following the references and “Cited by” lists of the best papers you already have. Definition: academic source. An academic source is a work written by subject experts, checked by other experts before publication (peer review, in the case of journals), and published by a journal, a scholarly press or a university. Purdue University Libraries ’ guide to scholarly sources puts the test simply: “One major character of scholarly sources is that they are peer-reviewed.” Where to search for academic sources, what each covers, and whether you need a library login (checked October 2026) Where to search What it covers Free, or library login? Google Scholar Journal and conference papers, theses and dissertations, academic books and preprints, across all subjects Free to search. Full text is free only where the paper is open access or your library subscribes Your university library's search and databases Everything your library subscribes to, plus print books and theses Library login (on campus, or off campus through the library's proxy) JSTOR 2,800+ academic journals and 158,000+ ebooks across the humanities, social sciences and sciences, often back to first issues Library login for most content; some open content is free Scopus Abstracts and citations from titles chosen by its Content Selection and Advisory Board, across 330 disciplines, with more than 2.4 billion cited references Library login Web of Science Core Collection 22,000+ peer-reviewed journals indexed cover to cover, in an index that grew out of the Science Citation Index (first released in 1964) Library login PubMed More than 40 million citations and abstracts of biomedical literature, from the US National Library of Medicine Free to search; it links to full text but does not hold it ERIC Education research, sponsored by the Institute of Education Sciences of the US Department of Education, with a "Peer reviewed only" filter Free; some records have full text on ERIC CORE 452 million open access articles collected from 16,000 data providers around the world Free DOAJ An index of open access journals from around the world Free ## What counts as an academic source? An academic source is written by researchers, reviewed by other researchers before publication, and published by a journal, scholarly press or university. Peer-reviewed journal articles are the core of most reference lists, because peer review is the check that separates them from popular writing. Purdue University Libraries describes peer review in four steps: an author submits to a journal or book editor, the editor sends the work to scholars who are “the academic peers (equals) of the author in that field”, the reviewers advise the editor, and the editor accepts the work, rejects it or asks the author to revise and resubmit. Examples of academic sources: - Peer-reviewed journal articles, including original studies, systematic reviews and meta-analyses - Scholarly books and chapters in edited books from university or academic presses - Conference papers and proceedings - Theses and dissertations - Official reports and statistics, which many courses accept as grey literature even though they are not peer reviewed Usually not academic sources: blog posts, news articles (unless you are studying the media), Wikipedia, social media posts and papers from predatory journals. Preprints sit in between: they are research papers that have not yet been peer reviewed, so check whether you can cite a preprint before you rely on one. Students often treat a DOI as proof that a source is academic. It is not. In a 2013 post, Crossref , a DOI registration agency for scholarly work, says “the DOI has nothing specifically to do with citation or scholarly publishing”, so datasets, preprints and reports can carry DOIs too. ## Where can I find academic sources? The two best places to find academic sources are Google Scholar, for a free search across every subject, and your university library’s databases, for precise searches and full text your library pays for. Free services such as CORE, DOAJ, PubMed and ERIC add open access sources, and the reference lists of good papers lead you to more. Start with one broad search in Google Scholar, then repeat your best search in one or two subject databases. JSTOR is strongest in the humanities and social sciences, PubMed in medicine and health, ERIC in education, and Scopus and Web of Science across the sciences and social sciences. Your library’s subject guides list the databases it recommends for your course. ## How do I find sources for a research paper? Find sources for a research paper in six steps: turn your question into search terms, search Google Scholar, repeat the search in a subject database, follow the citations of your best papers, check each source’s quality, and log every search. Here is each step. - Turn your question into two or three concepts. “Does remote work affect employee wellbeing?” becomes remote work and wellbeing . List synonyms for each: telework , working from home ; wellbeing , burnout , stress . The free search string builder at the end of this guide turns a question into concept blocks and a search string for each major database. - Search Google Scholar. Put each phrase in quotation marks and use “Since Year” to see recent work first. - Repeat your best search in a subject database. Use AND between concepts and OR between synonyms. PubMed’s help page says to type Boolean operators in capitals: “Enter Boolean operators in uppercase characters to combine or exclude search terms”. - Follow the citations of your three best papers. Read their reference lists for older work, then click “Cited by” in Google Scholar for newer work. - Check each source before you keep it. Is it peer reviewed, current enough for your field, and not retracted? - Log every search. Write down the database, the date, the exact search string and the number of results. You will need this if your methodology section describes your search, and it stops you running the same search twice. The search strategy guide covers step 3 in full for a systematic or scoping review. ## How do I use Google Scholar to find sources? Use Google Scholar by searching a short phrase rather than your whole question, limiting results with “Since Year”, and opening the “Cited by” link under any strong paper to see newer work that cites it. Google’s own help pages describe each of these features. - What it searches. Google Scholar “includes journal and conference papers, theses and dissertations, academic books, pre-prints”. Because preprints are in the results, check that each paper was published in a journal before you call it peer reviewed. - How results are ordered. “Your search results are normally sorted by relevance, not by date.” Click “Since Year” to show only recently published papers, still sorted by relevance. - Newer work on a topic. Under each result, click “Cited by” to “see newer papers that referenced them”. - Alerts. Click the envelope icon on a search “to have new results periodically delivered by email”. Set one up for your main search and your review stays current while you write. - Full text through your library. Google Scholar shows links labelled with your library’s name, such as “FindIt@Harvard”, to the right of a result when your library has the paper. If you are at a university and see no such link, ask your library how to set it up. Searching your whole research question as a sentence returns too many loosely related results. Two or three quoted phrases joined by your main concept work better. ## How do I find scholarly sources in library databases? Find scholarly sources in a library database by logging in through your library’s website, choosing the database for your subject, and searching your concepts joined with AND, OR and NOT, then using the database’s own peer-reviewed and date filters. Off campus, the library’s login (often called a proxy) lets you use its subscriptions from home. The operators work the same way in most databases. PubMed’s help page defines them: “AND retrieves results that include all the search terms”, “OR retrieves results that include at least one of the search terms”, and “NOT excludes the retrieval of terms from your search”. Double quotation marks search an exact phrase, such as “kidney allograft”. A worked search string for a question on remote work and wellbeing: ("remote work" OR telework OR "working from home") AND (wellbeing OR burnout OR stress) Each database adds its own tools. ERIC has a “Peer reviewed only” filter. Scopus and Web of Science show how many times each paper has been cited and who cited it, which makes them good for finding the most influential studies on a topic. JSTOR’s archive “often extends to first issues”, which helps when you need the foundational studies in a humanities or social science field. ## How do I find scholarly sources for free? You can find scholarly sources for free through Google Scholar, CORE, DOAJ, PubMed and ERIC, and by asking your library for any paper it does not hold through interlibrary loan. - CORE gathers “452M open access articles collected from 16K data providers around the world”. - DOAJ is an index of open access journals, so every journal in it publishes free to read. - PubMed (biomedicine and health) and ERIC (education) are free to search and link to free full text where it exists. - Google Scholar is free to search, and its help page suggests you “see if there’s a link to the full text on the publisher’s page with the abstract”. - Interlibrary loan gets you papers your library does not subscribe to. At the University of Texas at Austin , for example, “Interlibrary loan is a free service for current university students, faculty, and staff”, and article requests “are usually filled within 24-48 hours”. Check your own library’s terms. If a paper is paywalled, search its exact title in Google Scholar and CORE before you request it, in case a free repository copy exists. ## How do I find more sources from one good paper? Find more sources from one good paper by reading its reference list for older studies (backward snowballing) and opening its “Cited by” list in Google Scholar for newer studies (forward snowballing). This is called citation chaining, and it finds relevant papers that keyword searches miss because their titles use different words. Start with two or three strong, recent papers that sit close to your question. Go through each reference list and note every study that looks relevant. Then open “Cited by” for each paper and scan the newer work. Repeat with the best new finds. You can stop when new rounds keep returning papers you already have. Run at least one database search as well, so your source list does not rest on the reference choices of two or three authors. The snowballing guide has the full method, including how to record it for a systematic review. ## How do I know if a source is credible? A source is credible when you can confirm who wrote it, that it went through peer review or an equivalent editorial check, that its evidence supports its claims, and that it has not been retracted. The CRAAP test , created by the Meriam Library at California State University, Chico (US), turns this into five checks. The CRAAP test (Meriam Library, California State University, Chico) with one question from each check Check Question to ask (Meriam Library’s wording) Currency “ When was the information published or posted? ” Relevance “ Does the information relate to your topic or answer your question? ” Authority “ Who is the author/publisher/source/sponsor? ” Accuracy “ Is the information supported by evidence? ” Purpose “ Is the information fact, opinion or propaganda? ” Run three quick checks on every source: - Peer review. Paste the DOI, link or title into the free peer review checker at the end of this guide. It shows whether the record is a journal article or a preprint, any retraction, and how to confirm the journal’s review process. No index can certify that a single article was peer reviewed, so the checker shows what the public records say and who says it. - Predatory journals. A 2019 consensus statement in Nature ( Grudniewicz et al. ) defines predatory journals and publishers as “entities that prioritize self-interest at the expense of scholarship”, marked by false or misleading information, poor editorial practice, a lack of transparency and aggressive, indiscriminate solicitation. - Retractions. A retracted paper should not support your argument. See how to check whether a paper has been retracted , or run your whole list through the free reference checker , which flags retracted papers and references whose details do not match the published record. For how old a source can be, see how recent sources need to be . For judging a study’s method, see how to critically appraise a research paper . ## How many sources do I need for a research paper? For a course research paper, your assignment brief sets the number of sources, so follow it first. For a dissertation or thesis, plan one cited source per 100 to 150 words of literature review: about 13 to 20 sources for a 10,000-word undergraduate dissertation and 64 to 96 for an 80,000-word PhD thesis. The one-per-100-to-150-words figure is Litrevu’s planning rule, and the review lengths are the figures from our guide to literature review length , which explains where each comes from. The University of Kent (UK) gives a separate “very rough rule of thumb” for the significant pieces you discuss in depth: “8-10 significant pieces (books and/or articles) for an 8,000 word dissertation” and “up to 20 major pieces of work for 12-15,000 words”. Kent’s figure counts only the works you discuss in depth; the planning rule counts every source you cite. How many sources a dissertation or thesis cites, by length (Litrevu planning rule, one source per 100 to 150 words of literature review) Dissertation or thesis Typical literature review Sources to cite Kent’s significant pieces (UK) 8,000 words, Undergraduate About 1,600 words 11 to 16 8 to 10 10,000 words, Undergraduate About 2,000 words 13 to 20 Not given 12,000 words, Honours About 2,400 words 16 to 24 Up to 20 (for 12,000 to 15,000 words) 15,000 words, Master's About 3,000 words 20 to 30 Up to 20 (for 12,000 to 15,000 words) 20,000 words, Master's About 4,000 words 27 to 40 Not given 80,000 words, PhD About 9,600 words 64 to 96 Not given 100,000 words, PhD About 12,000 words 80 to 120 Not given Your programme handbook overrides all of these figures. Count is a planning number, not a quality test: a source list is complete when it covers the main findings, methods and disagreements on your question. ## How do I find scholarly sources for a US college research paper? In the US, academic sources are usually called “scholarly sources”, and the place to find them for a college research paper is your university library’s website: its main search, its subject databases and its interlibrary loan service. Federal databases add free sources in two big fields: PubMed in health and ERIC in education. - Library search first. Northwestern University Libraries , for example, tells English students that “The easiest way to find scholarly articles is by search the library website and using the ‘Articles’ filter”, and names JSTOR, the MLA International Bibliography and Project MUSE for literature. - Interlibrary loan for anything missing. Northwestern calls interlibrary loan “a quick and cooperative way to receive scans of articles or book chapters”. At UT Austin it is free for current students, and article requests are usually filled within 24 to 48 hours; physical books take around five business days or more. - Free federal databases. PubMed, from the National Library of Medicine, holds more than 40 million biomedical citations. ERIC, sponsored by the Department of Education’s Institute of Education Sciences, has a “Peer reviewed only” filter. - Peer review, defined. Purdue University Libraries ’ guide to scholarly sources and peer review sets out how peer review works, step by step. In the US a master’s project is usually called a thesis and a doctoral one a dissertation, so use both words when you search a US library catalogue for earlier graduate research on your topic. ## How do I find sources for an RRL in the Philippines? In the Philippines, the literature review is usually called the RRL (review of related literature), and you find its sources the same way: your university library’s subscribed databases, its repository of local theses, and free services such as Google Scholar, CORE and DOAJ. Local theses matter for an RRL, because they show what has already been studied in your setting. The University of the Philippines Diliman University Library ’s access guidelines (dated 21 August 2020) show what this looks like at one university: - Subscribed databases: EBSCO Academic Search Complete, JSTOR, ScienceDirect, Scopus, Taylor & Francis Online, Project MUSE, IEEE Xplore and others. - Local research: UP Diliman Journals Online and the Digital Archives @ UP Diliman, which provides full-text electronic theses and dissertations under the conditions it sets. - Off-campus access: the 2020 guidelines reach ScienceDirect and Scopus through UP Mail and the other databases through the library’s EZproxy. The library now says its EZproxy licence expired in March 2021, and its remote access page points students to OpenAthens, which works with a UP Mail login. Your own university’s list will differ, so check its library website or ask the librarian. Senior high school and college students without a subscription can still build an RRL from Google Scholar, CORE and DOAJ. ## How do I keep track of the sources I find? Keep track of sources with a reference manager from day one, plus a simple search log that records where you searched, when, with what words, and what you kept. The reference manager stores the papers and formats the citations; the log records how you found them. Our comparison of Zotero, Mendeley and EndNote helps you pick a reference manager, and how to organize research sources sets up the folders and tags. Steal this search log. Copy it into a document or spreadsheet and add one row per search: Search log template (one row per search; the example row is illustrative) Date Database Exact search string Filters Results Kept (date) Google Scholar "remote work" AND burnout Since 2020 (number) (number) ## How do I check what my academic sources say with an AI assistant for writing backed by sources? Once you have your academic sources, add the PDFs to Litrevu and ask them your research question: each answer cites the exact passage in your own papers, and Litrevu says when your papers do not cover the question. You still read the passages, decide what matters and write the paper yourself. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Here is the workflow for the academic sources you have found, using the steps on Litrevu’s how it works page: - Add your papers. Upload the PDFs, paste a PDF link, a DOI or an arXiv link, or paste a paper’s text. If you are still short of sources, Litrevu can find open-access papers on your topic, and you choose which ones to add. - Ask them your question. For example: “What do these papers find about remote work and burnout?” Citations come only from your papers, and when your papers do not cover the question, Litrevu says so. - Open each citation. The passage opens highlighted on the page of the PDF it came from, with the paper’s title, authors and year. Read it before you use the point. - Compare the papers. Line the studies up side by side in a cited table to see where they agree and where they differ. (The free literature review matrix builds a quoted comparison table from up to three of your PDFs.) - Check your own paragraph. Paste a paragraph you wrote. Each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. - Cite and export. Switch between APA, MLA, Chicago, IEEE, Harvard and Vancouver, and export your references to BibTeX or RIS. What a claim check looks like (a format illustration, not a real result): Your sentence: “Remote work increases burnout.” Result: Partly supported. (Author, Year) reports this for one group of workers; (Author, Year) reports the opposite for another. Open each citation to read the passage. “Not in your papers” means your library does not cover a claim. It does not prove that nobody has studied it, so search again before you call it a gap. ## How does Litrevu compare with other research tools? Elicit, Consensus, Scite and ResearchRabbit help you find or assess papers across the published literature, and Litrevu helps you read, compare and check the papers you have already chosen. If you still need sources, Elicit, Consensus and ResearchRabbit are built for discovery and Litrevu’s own search covers only open-access papers; if you need to know whether a study has been contradicted since, Scite answers that and Litrevu does not. Research tools compared by what each does best (from each vendor’s own pages, read August to October 2026) Tool Best for Works from Where it beats Litrevu Litrevu Reading, comparing and checking the papers you have chosen PDFs, PDF links, DOIs, arXiv links and pasted text you add, plus open-access papers from its search Not applicable Elicit Finding papers, systematic reviews and structured data extraction A discovery corpus of 138 million+ papers, plus PDFs you upload A far larger search corpus, systematic-review screening at scale and purpose-built extraction tables Consensus Evidence answers to yes/no research questions Over 200 million papers, primarily peer-reviewed, from Semantic Scholar, OpenAlex and its own crawl Answers a question across the published literature, not only your own papers Scite Seeing whether later work supports or contrasts a paper Over 1.6 billion citations, each classified as supporting, contrasting or mentioning Tells you whether a source is contested; Litrevu has no view on this ResearchRabbit Exploring outward from one paper One starting paper, expanded through related works, authors and topics Visual citation-graph discovery; Litrevu has nothing comparable Elicit also works from uploaded PDFs, so the real difference there is the shape of the output: Elicit produces reports, tables and structured comparisons, while Litrevu is a conversation with your own papers in which every citation opens to its passage. These products change often, so check each vendor’s current feature list before you decide. ## Frequently asked questions about finding academic sources ## Where can I find academic sources? The best places to find academic sources are Google Scholar and your university library's databases, such as JSTOR, Scopus, Web of Science, PubMed and ERIC. Free services such as CORE and DOAJ add open access papers. The reference lists and "Cited by" lists of strong papers lead you to more. ## What counts as an academic source? An academic source is written by researchers, checked by other experts before publication, and published by a journal, scholarly press or university. Peer-reviewed journal articles, scholarly books, conference papers and theses all count. Blog posts, news articles and Wikipedia do not. ## How do I find sources for a research paper? Turn your question into two or three concepts with synonyms, search Google Scholar, then repeat the search in a subject database using AND and OR. Follow the references and "Cited by" lists of your three best papers. Check each source's quality and log every search. ## How do I find scholarly sources for free? Search Google Scholar, CORE, DOAJ, PubMed (health) and ERIC (education), all free to use. If a paper is paywalled, search its title in Google Scholar and CORE for a free repository copy. Ask your university library for anything else through interlibrary loan, which is free for current students at UT Austin in the US, for example; check your own library's terms. ## How do I know if a source is credible? A source is credible if you can confirm its author, its peer review or editorial check, its evidence and that it has not been retracted. The CRAAP test from California State University, Chico checks currency, relevance, authority, accuracy and purpose. A peer review checker and a retraction check add two quick tests. ## How many sources do I need for a research paper? For a course research paper, the assignment brief sets the number. For a dissertation, plan one cited source per 100 to 150 words of literature review, which is Litrevu's planning rule: about 13 to 20 sources for a 10,000-word undergraduate dissertation and 64 to 96 for an 80,000-word PhD thesis. Your programme handbook overrides these figures. ## What are examples of academic sources? Examples of academic sources are a peer-reviewed article in a journal, a systematic review or meta-analysis, a book from a university press, a chapter in an edited academic book, a peer-reviewed conference paper and a master's or PhD thesis. Official statistics and government reports are often accepted too, as grey literature. ## Ask your sources what they say Finding academic sources is the first half of a research paper; the second is knowing exactly what each one says. Add the papers you found, ask them your research question, and open the passage behind every answer before you write. Try Litrevu with your papers . Free to start, no credit card required. ## Related Guides - How to Write a Literature Review (Step-by-Step Guide for 2026) - How to Cite Sources in a Research Paper (6 Styles Compared) - Research Paper Structure: Sections in Order + Word Counts - How to Write a Search Strategy for a Literature Review --- # How Long Should a Literature Review Be? By Level and Country URL: https://litrevu.com/blog/how-long-should-a-literature-review-be Category: Literature Review Published: 2026-04-20 Summary: About 20% of your word count, but limits vary by level and country. Find your undergrad, master's or PhD figure in the table, or use the free calculator. Guides ## How Long Should a Literature Review Be? By Level and Country By Wasim Ghoor · 20 April 2026 · 7 min read · Updated 20 October 2026 A literature review is usually about 20 % of a dissertation's word count, inside the 15 to 25 % per chapter that the University of Hull gives: about 2,000 words in a 10,000 -word undergraduate dissertation and 3,000 in a 15,000 -word master's. A PhD literature review is usually one chapter of 8,000 to 10,000 words, according to the University of Kent , which is 10% to 12.5% of an 80,000 -word thesis. ## How long is a literature review for each word count? A literature review takes about 20 % of an undergraduate, honours or master's dissertation and about 12 % of a PhD thesis. The table gives the figures for the word limits students search for most, with the number of sources to cite at each length. Literature review length by dissertation word count and level Dissertation or thesis Literature review (words) Sources to cite 8,000 words, Undergraduate About 1,600 ( 1,200–2,000 ) 11–16 10,000 words, Undergraduate About 2,000 ( 1,500–2,500 ) 13–20 12,000 words, Honours About 2,400 ( 1,800–3,000 ) 16–24 15,000 words, Master's About 3,000 ( 2,250–3,750 ) 20–30 20,000 words, Master's About 4,000 ( 3,000–5,000 ) 27–40 80,000 words, PhD About 9,600 ( 8,000–12,000 ) 64–96 100,000 words, PhD About 12,000 ( 10,000–15,000 ) 80–120 The range for each row is the 15 to 25 % the University of Hull gives for a chapter ( 10 to 15 % for a PhD, anchored on the University of Kent's 8,000 to 10,000 words). Sources to cite follow Litrevu's planning rule of one per 100 to 150 words of review. Your handbook or supervisor overrides every number here. 10,000 words, Undergraduate, dissertation with your own data. ## Literature review length calculator Enter your word limit to see how long your literature review and every other chapter should be. Total word count Level Undergraduate Honours Master's PhD What you are writing Dissertation with your own data Literature-based dissertation Standalone literature review Use the limit your handbook gives, usually excluding the abstract, references and appendices. Look up your university's word limit . Aim for about 2,000 words of literature review ( 1,500–2,500 , or 15 –25 % of 10,000 ). Sources to cite in the review 13–20 Key works to read closely 10–14 Themes to plan 2–3 , about 570–850 words each Words for each chapter Chapter Share Words Introduction 10 % 1,000 ( 500–1,000 ) Literature review 20 % 2,000 ( 1,500–2,500 ) Methodology 15 % 1,500 ( 1,500–2,500 ) Results or findings 20 % 2,000 ( 1,500–2,500 ) Discussion 25 % 2,500 ( 1,500–2,500 ) Conclusion 10 % 1,000 ( 500–1,000 ) For comparison, the University of Kent puts a Undergraduate literature review at no more than 2,000 words. Your handbook or supervisor overrides every number here. Copy this plan How the numbers are worked out Plan it to your hand-in date Start with your papers. Search open-access papers or upload your own PDFs into a free Litrevu library, up to 20 papers with no card, and ask what they say about your question. Every answer links to the passage it came from, so you can plan your themes from the sources themselves. What's your research topic? Find papers on it From litrevu.com/tools/dissertation-word-count-calculator. Your handbook or supervisor overrides every date and number here. ## How long is an undergraduate literature review? An undergraduate literature review is usually no more than 2,000 words, the University of Kent 's figure, or about 20 % of the dissertation: 1,600 words in an 8,000 -word dissertation and 2,000 in a 10,000 -word one. Trinity College Dublin's Department of History asks its undergraduates for a review essay of about 2,000 words. At this level an undergraduate literature review does not need to be exhaustive. It needs to show the main conversations on the topic and where the student's own question fits, which usually takes 2 to 3 themed sections. Undergraduates more often write too much than too little. A focused review that synthesises a dozen sources well beats a longer one that summarises twice as many, one paper at a time. ## How long is an honours literature review? An honours literature review is usually about 20 % of the thesis, so about 2,400 words in a 12,000 -word honours project ( 1,800–3,000 ). UNSW Sydney gives a rough guide of around 15 to 30% of the whole thesis, and warns that a review of more than 40% is probably too long. An honours literature review usually has 3 to 4 themed sections, one more than an undergraduate review, because an honours project is a research project in its own right. ## How long is a master's literature review? A master's literature review is usually 2,000 to 4,000 words. The University of Kent puts it at around 2,000 to 3,000 words, and 20 % of a 15,000 to 20,000 -word dissertation is 3,000 to 4,000 . Departments set their own figures. The London School of Economics' Department of Media and Communications asks for a critical review of approximately 2,500 words, and the University of Essex's Department of Language and Linguistics says that in an empirically based dissertation not more than a third should be literature review. Where the University of Kent and the 20 % share disagree, plan from your own word limit: it is the number your marker holds you to. A master's review usually has 4 to 6 themed subsections, with the most important studies discussed in enough depth to cover their method, sample and limitations. For the structure, see how to structure a literature review by theme ; for writing across sources rather than summarising them one by one, see how to synthesize sources in a literature review . Writing a literature review right now? Ask your papers anything, compare studies side by side and check your writing against your sources. Every citation opens the passage it came from. Free to start. No card needed. What's your research topic? Find papers on it ## How long is a PhD literature review? A PhD literature review is typically one chapter of 8,000 to 10,000 words, according to the University of Kent , which is 10% to 12.5% of an 80,000 -word thesis. It is a smaller share than at master's level because a thesis has more chapters. Not every thesis has a single review chapter. The Australian National University notes that many theses put a brief review in the introduction and a longer review chapter after it, and that in some, particularly science theses, a review in the introduction is enough. Doctoral reviews usually run to 5 to 8 major sections, often organised around a theoretical framework; see how to write a theoretical framework . ## How long is a literature review in the UK, US, Australia, South Africa and the Philippines? The share is similar everywhere, but the name of the document and who sets the limit change by country. These are published university figures as of October 2026; the dissertation word limits dataset lists the limits of 66 universities with their sources. Published literature review guidance by country Country Usually called Published guidance on the review United Kingdom Dissertation (undergraduate and master's), thesis (PhD) Kent : up to 2,000 words undergraduate, 2,000 to 3,000 master's, 8,000 to 10,000 PhD. LSE (Media and Communications): approximately 2,500 words. United States Thesis (master's), dissertation (doctorate) Boston University (master's thesis, Emerging Media Studies): “Anything under 10 pages is likely too cursory of a review.” Most US graduate schools in the dataset state limits in pages or set none. Australia Thesis (honours and PhD) UNSW Sydney : around 15 to 30% of the whole thesis; more than 40% is probably too long. South Africa Research report, mini-dissertation, dissertation, thesis Wits (Health Sciences): introduction and literature review about 25% of the write-up. UKZN (Medicine, MMedSc and PhD): an introduction and literature review chapter of about 3,000 to 4,000 words. Philippines RRL (review of related literature) UP Manila : the RRL is the second chapter of the research proposal. It gives no length, so use your school's thesis manual or the 20 % share. In the US, “dissertation” usually means a doctoral dissertation, so a US master's student searching for a dissertation figure is reading PhD guidance. Use the master's row of the word count table instead. The literature review inside a research proposal is shorter again, because it only has to show what is known, what is missing and where your study fits. For the sections around it, see how to write a research proposal . ## How long is a standalone literature review? A standalone literature review, one written as an assignment or a journal article rather than as a chapter, is the whole document, so its length is the word limit of the brief or the journal's author guidelines. It covers a topic area as a whole and ends with directions for future research, where a chapter review ends with the gap the student's own study fills. If an assignment asks for a “literature review paper”, it is usually a standalone review. For how the types of review differ, see literature review vs. systematic review . ## How many sources should a literature review have? Plan one cited source per 100 to 150 words of literature review, which is Litrevu's planning rule: about 13 to 20 sources in a 2,000 -word review and 64 to 96 in a 9,600 -word one. The University of Kent 's rough rule for the significant pieces you discuss in depth is 8 to 10 for an 8,000-word dissertation and up to 20 for 12,000 to 15,000 words. Not every source carries equal weight. A few core studies get a paragraph each on their method and findings, most sources are cited in a sentence alongside others to support or contrast a point, and some are brief citations for definitions or context. ## What if your literature review is too long or too short? Word count targets are a planning tool, not the goal. A literature review is the right length when it covers the main themes and debates, includes evidence that contradicts as well as supports, synthesises across sources rather than summarising them, and ends with a clear research gap. Check before you finalise the length: - Have I covered the major themes and debates in my field? - Have I included both supporting and contradictory evidence? - Does my review end with a clear research gap? - Am I synthesising across sources, not just summarising? - Is the length in proportion to my total word limit? If a review is over the limit, how to cut a literature review down to the word limit sets out what to remove first. For the writing process itself, see the complete guide to writing a literature review . ## Frequently asked questions about literature review length ## How many words is a literature review in a 10,000-word dissertation? About 2,000 words, within a range of 1,500 to 2,500. That is 20% of the total, inside the 15 to 25% the University of Hull gives for one chapter of a dissertation. At that length, plan to cite roughly 13 to 20 sources. ## How long should a literature review be for a master's thesis or dissertation? Usually 2,000 to 4,000 words. The University of Kent puts a master's literature review at around 2,000 to 3,000 words, and 20% of a 15,000 to 20,000-word dissertation is 3,000 to 4,000. The figure in your programme handbook overrides both. ## How long should a PhD literature review be? Typically one chapter of 8,000 to 10,000 words, according to the University of Kent, which is 10% to 12.5% of an 80,000-word thesis. Some theses, particularly in the sciences, keep a shorter review inside the introduction instead, as the Australian National University notes. ## How long should an undergraduate literature review be? No more than about 2,000 words for most undergraduate dissertations, which is the University of Kent's figure. As a share of the total, aim for 20%: about 1,600 words in an 8,000-word dissertation and 2,000 in a 10,000-word one. ## How long should an RRL be? An RRL (review of related literature), the second chapter of a research proposal in the University of the Philippines Manila's guide, follows the same rule as any literature review: plan about 20% of your total word or page limit unless your school's thesis manual gives its own figure. ## How many sources should a literature review have? The University of Kent's rough rule is 8 to 10 significant pieces for an 8,000-word dissertation and up to 20 for 12,000 to 15,000 words. Counting every source you cite, Litrevu's planning rule is one per 100 to 150 words of review, so a 2,000-word review cites about 13 to 20. ## Plan Your Review Around Your Papers Whether you are writing a 2,000-word chapter or a 10,000-word one, the hardest part is the same: knowing what your papers say well enough to structure an argument around them. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Ask it how your papers group into themes, agree an outline in sections, and open the passages behind each theme, so you know where your words should go. The writing stays yours. Free to start, no credit card required. Try Litrevu free ## Related Guides - How to Write a Literature Review (Step-by-Step Guide for 2026) - Literature Review Example: Annotated Sample You Can Follow - Literature Review vs. Systematic Review: What Is the Difference? - How to Cut a Literature Review Down to the Word Limit (2026) --- # Literature Review vs Essay: Key Differences in One Table URL: https://litrevu.com/blog/literature-review-vs-essay Category: Literature Review Published: 2026-04-20 Summary: A literature review maps what research says on a question; an essay argues one position. See how purpose, structure and sources differ, side by side. Guides ## Literature Review vs Essay: Key Differences in One Table By Wasim Ghoor · 20 April 2026 · 12 min read · Updated 5 November 2026 A literature review synthesises what published research says about a question, showing where studies agree, where they conflict and what is still unknown. An essay argues one position in response to a question and uses sources as evidence for that position, so in a literature review the sources are the subject of the writing, while in an essay the sources serve the writer’s own argument. Literature review (definition): a piece of writing that summarises, synthesises and evaluates published research on a defined topic to show what is known, how well that knowledge is established and where future research should go. Essay (definition): a piece of writing that presents a coherent argument in response to a question or stimulus and tries to persuade the reader that the writer’s position is credible. Both definitions follow Western Sydney University’s literature review purpose guide , which sets the two genres side by side and draws its review definition from the University of Melbourne. ## What is the difference between a literature review and an essay? The difference between a literature review and an essay is purpose: a literature review reports and evaluates the state of the research on a topic, while an essay builds and defends one answer to a question. Every other difference between a literature review and an essay (how sources are chosen, how the body is organised, what the conclusion does) follows from that difference in purpose. Feature Essay Literature review Source Purpose Present a coherent argument in response to a question and persuade the reader the position is credible Establish what is known on the topic, how well it is established and where research should go next Western Sydney University Role of sources Evidence for the writer’s argument The subject matter of the writing Western Sydney University ; Queen Margaret University Choice of sources More freedom to choose literature that supports the argument Must represent all aspects of the topic, including studies that disagree University of Hull Thesis statement A one- to two-sentence summary of the position, usually at the end of the introduction Often no traditional thesis; states the organising principle instead University of Bath ; UNC Writing Center Body organised by How each point contributes to the overall argument Themes, chronology or research methods in the literature Western Sydney University ; UNC Writing Center Conclusion Returns to the position the thesis set up Summarises the state of the research and identifies gaps or problems Queen Margaret University (literature review) Where it appears A response to a set question or stimulus Often a section of a larger paper, such as a thesis chapter or lab report; sometimes a paper in itself UNC Writing Center Length Set by the assignment brief Set by the brief or programme handbook; see how long a literature review should be Your course documents Think of a literature review as the map of a territory and an essay as one route across that territory, argued as the best route. A map that only shows the roads the mapmaker likes is a bad map, and that is why a literature review cannot leave out the studies that disagree. The University of Hull’s guide to stand-alone literature reviews puts the same idea plainly: in an essay “you have more freedom about choosing literature that supports the argument”, while in a literature review “it is far more important to make sure you are representing all aspects of the topic.” ## How is a literature review structured compared with an essay? A literature review and an essay both have an introduction, a body and a conclusion; Queen Margaret University says literature reviews “contain at least three basic elements” like most academic papers. The structural difference is what goes in each part: an essay’s introduction ends with a thesis statement and its body defends that thesis, while a literature review’s introduction sets out the scope and its body is organised around themes, periods or methods in the research. Part Essay Literature review Introduction Context, then a thesis statement of one to two sentences, usually at the end of the introduction ( Bath ) Background, the broad context and the main topics covered ( QMU ); for a stand-alone review, how you conducted the review ( Hull ) Body Paragraphs ordered by how each contributes to the argument ( Western Sydney ) Organised chronologically, thematically or methodologically ( UNC ), usually thematically ( QMU ) Conclusion Returns to the thesis the body has supported Summarises the current state of research, identifies gaps and can explain how your study addresses them ( QMU ); gives implications for the wider field ( Hull ) Subheadings Depends on the assignment Common, because a chronological review has subsections for each period and a thematic review has one per theme ( UNC ) The thematic structure is the one most students need. The guide to structuring a literature review by theme shows how to turn a pile of papers into themed sections, and the annotated literature review example shows a finished one. ## How are sources used in a literature review vs an essay? In an essay, sources are evidence: the writer cites a study to support a point and moves on. In a literature review, sources are the subject: the writer compares what each study found and how it was done, and explains why studies agree or disagree. Queen Margaret University draws the line in one sentence: “in a literature review, the literature itself is the subject of discussion.” The same citation reads differently in each genre. The two sentences below are format illustrations with placeholder authors, not real studies. Genre Format illustration (placeholders, not real studies) Essay “[Finding] (Author A, Year), which shows that [your position] is the stronger reading.” Literature review “Author A (Year) reports [finding], while Author B (Year) reports [contrasting finding]; the two studies differ in [method or sample], which may explain the disagreement.” The essay sentence uses Author A to prove a point. The literature review sentence puts Author A and Author B in conversation and asks why they disagree, which is what synthesis means. The guide to synthesising sources in a literature review walks through that move step by step, and the free literature review matrix lays your papers out in a grid so the comparisons are visible before you write. ## Does a literature review have a thesis statement? A literature review usually has no traditional thesis statement, but a literature review does make a claim about what the research shows. The UNC Writing Center says a literature review “may not have a traditional thesis statement (one that makes an argument)” and should still tell readers what to expect by stating its organising principle. Not every guide words this the same way. The University of Hull quotes Machi and McEvoy’s definition of a literature review as “presenting a logical case that establishes a thesis” and tells students that in a review “your argument is about what you think the literature shows.” The two positions fit together, and this guide follows both: a literature review does not take a side on the question the way an essay thesis does, but a literature review does argue a reading of the evidence, such as which findings are well supported and where the gap is. Compare the two openings below (format illustrations with placeholders): - Essay thesis: “[Policy X] should replace [policy Y] because [reason one] and [reason two].” - Literature review organising statement: “This review groups research on [topic] into [themes] and shows that evidence on [aspect A] is more consistent than evidence on [aspect B].” For the essay side, the guide to writing a thesis statement has worked examples. ## How does the voice of a literature review differ from an essay? An essay’s voice is persuasive, because Western Sydney University describes the essay’s job as persuading “the reader that your position is credible.” A literature review’s voice is evaluative: the writer judges the quality and fit of the research rather than advocating for one answer, and Queen Margaret University warns that “it is not sufficient to simply describe or summarise ideas from the literature.” An evaluative voice is not a passive one. The UNC Writing Center says that while a literature review presents others’ ideas, “your voice (the writer’s) should remain front and center”, which in practice means opening and closing each paragraph of a literature review with your own point about the studies, and placing the citations in between. A literature review can be sharp about weak methods or small samples; the criticism is aimed at the research, not at an opponent. Writing a literature review? Litrevu reads your uploaded papers and shows where they agree and disagree, each answer linked to its passage. Free to start, no credit card required. Try Litrevu free ## When do you write a literature review instead of an essay? You write a literature review when the assignment asks for a “literature review” or “review of the literature”, or when you are writing the review chapter of a thesis, dissertation or research proposal. You write an essay when the question asks you to take a position and defend it, which Western Sydney University describes as presenting “a coherent argument in response to a stimulus or question.” Queen Margaret University lists four purposes a literature review serves: to give background on a research topic, to establish the topic’s importance, to show familiarity with the topic, and to “reveal gaps in current work.” If your assignment needs any of those, the assignment is asking for a literature review. The UNC Writing Center adds that literature reviews are most common in the sciences and social sciences, where a literature review is often one section of a larger paper and “sometimes a literature review is written as a paper in itself.” Some assignments combine both genres. UNC notes that a research paper develops a new argument and is “likely to contain a literature review as one of its parts”; inside a research paper, the literature review section still follows review conventions even though the paper as a whole argues a position. The research paper structure guide shows where that section sits. If the brief is unclear, ask your lecturer which genre is expected (in the US, ask your professor); and if the brief asks for a systematic or scoping review, see literature review vs systematic review . ## What are common mistakes when a literature review reads like an essay? The most common mistake when a literature review reads like an essay is opening with a position and then citing only the studies that support that position. Five specific mistakes, each with the rule it breaks: - Opening the literature review with an argumentative thesis. A line such as “This paper argues that…” is an essay opening. The UNC Writing Center says a literature review states its organising principle instead of a traditional argumentative thesis. - Organising the literature review source by source. Paragraphs of the form “Author A found X. Author B found Y.” are summaries in sequence. Queen Margaret University is direct: “Summaries have their uses, but they are not the building blocks of a good literature review.” Group the studies by theme instead. - Citing only the studies that agree with you. An essay may select supporting evidence; a literature review may not. The University of Hull says a review must represent “all aspects of the topic”, so conflicting studies belong in the literature review, with an explanation of why they conflict. - Ending the literature review without a gap. Queen Margaret University says the conclusion of a literature review “should identify any gaps or problems with the existing research.” A conclusion that only restates a position is an essay ending. - Letting the sources speak instead of the writer. A literature review built from quotations strung together has no voice. The UNC Writing Center’s rule is that the writer’s voice stays “front and center”, with each paragraph led by the writer’s own point. The guide to common literature review mistakes covers further errors beyond the essay-style ones listed here. ## How can an AI assistant for writing backed by sources help you write a literature review instead of an essay? An AI assistant for writing backed by sources helps with the part of a literature review that an essay never asks for: seeing exactly where your papers agree, disagree and fall silent. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. The workflow on your own papers for a literature review: - Add the papers you have. Upload PDFs, paste a PDF, DOI or arXiv link, or pick open-access papers Litrevu finds on your topic. - Ask where the papers disagree. Ask a question such as “Where do these papers disagree about [variable], and how do their methods differ?” Litrevu answers only from your papers, cites each claim, and says when your papers do not cover the question. - Open every citation. Each citation opens the highlighted passage on the PDF page, so you check the source yourself. - Compare the papers side by side. Litrevu lines studies up in a cited table showing where they agree and differ. That table is the raw material of synthesis; deciding the themes and what the pattern means is your job. - Check whether your paragraph reads like a review. Paste a paragraph you wrote and each claim comes back as Supported, Partly supported, Contradicted or Not in your papers. An essay-style paragraph often contains claims labelled Not in your papers, because those claims are your position rather than the literature’s. “Not in your papers” means your library does not cover that claim; it is not proof that a gap exists in the wider literature. - Cite and export. Export the document to Word or PDF, with the references in BibTeX or RIS for your reference manager. A compare table for a literature review has this shape (format illustration with placeholders, not a real Litrevu output): Paper Design Finding on [variable] Cited passage Author A (Year) [Design] [Finding] Opens the highlighted passage Author B (Year) [Design] [Contrasting finding] Opens the highlighted passage You choose the themes, decide what the disagreements mean and write every sentence of the literature review. Many universities do not allow AI-written text in submitted work, so check your institution’s policy and declare how you used AI. ## Start your literature review from the papers you already have If you have the papers for your literature review saved as PDFs, add them to Litrevu and ask where they agree and disagree, with every answer opening to its passage. The synthesis and the writing stay yours. Free to start, no credit card required. Try Litrevu free ## Frequently asked questions ## Is a literature review an essay? No. A literature review is not an essay, because a literature review reports and evaluates the state of the research while an essay argues a position. A stand-alone literature review does share an essay’s introduction, body and conclusion; the University of Hull says a stand-alone review “has a similar structure to a standard essay”, but its focus is the literature itself. ## Can a literature review have an argument? Yes. A literature review argues a reading of the evidence, not a side on the question. The University of Hull tells students that in a literature review “your argument is about what you think the literature shows”, such as which findings are well supported and where the gap lies. ## How long is a literature review compared with an essay? The length of a literature review and of an essay is set by the assignment brief or programme handbook, not by the genre. In a dissertation, the literature review is usually one chapter; the guide to how long a literature review should be gives typical word counts by level and country, and the dissertation word limits tool at the end of this guide lists named universities’ limits. ## Does a literature review need a conclusion? Yes. A literature review needs a conclusion that summarises the current state of the research, identifies gaps or problems in it and can explain how your own study will address them, according to Queen Margaret University. The University of Hull adds that the conclusion should give implications for the wider field. ## Is a literature review written in first person? A literature review can use the first person if your style guide and department allow it. APA Style (7th edition, section 4.16) tells a single author to use “I” to refer to themselves, so “I grouped the studies into three themes” is acceptable in APA. Some departments still prefer an impersonal style, so check your course guidance. ## Can an essay include a literature review? Yes. A research paper or long essay can contain a literature review section; the UNC Writing Center says a research paper is “likely to contain a literature review as one of its parts.” Inside the larger paper, the literature review section follows review conventions (themes, synthesis, a gap) while the paper as a whole argues a position. ## Related Guides - How to Write a Literature Review: 5 Steps + Examples - How to Synthesize Sources in a Literature Review (Step-by-Step, With Examples) - How to Structure a Literature Review by Theme (With Examples) - Literature Review Example: Annotated Sample You Can Follow --- # How to Organize Research Sources (So You Don't Lose Your Mind) URL: https://litrevu.com/blog/how-to-organize-research-sources Category: Getting Started Published: 2026-04-20 Summary: Practical strategies for organizing research papers, notes, and citations. Covers source matrices, reference managers, and folder systems that actually work. Guides ## How to Organize Research Sources: A System That Actually Works By Jessica McLaren · 20 April 2026 · 13 min read · Updated 16 November 2026 To organize research sources, keep one folder per project with every PDF renamed Author_Year_ShortTitle, store every paper in one reference manager such as Zotero, Mendeley or EndNote, and log each paper in a source matrix with a theme column you fill in as you read. That three-part system works the same for a 10-source essay and for a 90-source PhD thesis or dissertation. What does it mean to organize research sources? Organizing research sources means keeping every paper you read for a project findable, citable and connected to your argument: the file in a predictable place, the reference details in one reference manager, and your notes on what each paper found and which theme it supports in one table. The four parts of a research source system Part of the system What it holds Free option When you need it Project folder and file names The PDFs, named Author_Year_ShortTitle Any computer or cloud drive From the first download Reference manager Reference details, PDFs, citations in Word or Google Docs Zotero (300 MB free sync storage), Mendeley (2 GB free storage), EndNote Basic (2 GB, browser only) Once you cite more than a handful of sources Source matrix One row per paper: method, sample, finding, theme, page A spreadsheet or the Litrevu matrix tool Before you write the literature review Annotations Highlights plus a one-line note on why each one matters Zotero's built-in PDF reader Every time you read Storage figures are from Zotero's storage page , Mendeley's reference manager page and the University of North Texas library guide to EndNote Basic , as of November 2026. ## How do you organize research sources? You organize research sources in five steps: make one project folder, rename every PDF the moment you download it, save every paper to one reference manager, annotate as you read, and log every paper in a source matrix with a theme column. Students rarely lose sources because they cannot find papers. They lose sources because they cannot find a paper again three weeks later. Steal this setup for a new thesis, dissertation or research paper: - Make the project folder. One top-level folder per project, with numbered subfolders such as 01_Background and 05_To_Read so the subfolders stay in order. - Rename on download. AuthorLastName_Year_ShortTitle.pdf, every time, before the file leaves your Downloads folder. - Save to one reference manager. Zotero, Mendeley or EndNote. Pick one and put every source in it, including the ones you are unsure about. - Annotate as you read. Highlight, then add a short note saying why the highlight matters. - Log the paper in your source matrix. Fill in the method, sample, key finding, theme and page number before you open the next PDF. Step 5 is the one students skip, and the source matrix is the step that turns a pile of papers into the sections of a literature review. ## How should you name and file research PDFs? Name every research PDF AuthorLastName_Year_ShortTitle.pdf , with no spaces, and file the PDF in a numbered subfolder of one project folder. The Boston University Libraries file naming guidance gives the rules behind this format: use hyphens, underscores or camelCase instead of spaces, keep names “relatively short”, avoid special characters such as / \ : * ? and write dates as yyyymmdd so files sort in order. A file name like 1-s2.0-S0747563217306854-main.pdf, the kind a publisher download gives you, tells you nothing three weeks later. Chen_2024_ScreenTimeAnxiety.pdf tells you the author, the year and the topic at a glance. A project folder structure for a thesis or dissertation Folder What goes in it Thesis_Research/01_Background Papers that define the problem and the context 02_Theoretical_Framework Theory and model papers 03_Methodology Papers you will cite to justify your method 04_Key_Studies The studies your argument leans on most 05_To_Read Everything downloaded but not yet read 06_Not_Relevant Papers you decided against, kept rather than deleted The 05_To_Read folder keeps unread papers out of the folders you work from. The 06_Not_Relevant folder matters as much: your research question will shift, and a paper you rejected in month one may be the paper you need in month four. If your reference manager holds the PDFs, copy the same structure into its collections so the folder and the library match. ## Zotero, Mendeley or EndNote: which reference manager should you use? Zotero is the safest default for most students because Zotero is free, runs on macOS, Windows and Linux, and plugs into Microsoft Word, LibreOffice and Google Docs. Choose EndNote if your lab or department already works in EndNote, and Mendeley if your supervisor or research group shares a Mendeley library. Zotero, Mendeley and EndNote compared from each vendor's own pages Feature Zotero Mendeley EndNote Cost model Free; paid storage upgrades Free account with 2 GB of storage Desktop is a one-time purchase, with a student licence and a free trial; EndNote Basic is free online Free storage 300 MB of synced storage 2 GB EndNote Basic: 2 GB Save from the browser Zotero Connector for Chrome, Firefox, Edge and Safari Mendeley browser extension Check EndNote's site for your version Cite while you write Microsoft Word, LibreOffice, Google Docs Mendeley Cite for Microsoft Word Check EndNote's site for your version Citation styles Over 10,000 in the Zotero Style Repository Not stated on Mendeley's pages Not stated on EndNote's buying page Best for Most students, any budget Groups already on Mendeley Labs and universities that license EndNote Sources: Zotero storage , Zotero download page , Zotero word processor plugins , Zotero styles , Mendeley reference manager , Mendeley Cite , EndNote buying page and the UNT guide to EndNote Basic , all read November 2026. Check whether your university library already provides EndNote before you buy a licence. The cite-while-you-write plugin is the feature that pays off most. When a supervisor asks you to switch a thesis from APA to Harvard, a reference manager reformats every in-text citation and the reference list for you instead of you retyping 40 references by hand. For a full side-by-side, read Zotero vs Mendeley vs EndNote: Which Is Best for Students? , and for citation styles see our guide to citing sources in a research paper . Already have your sources organized? Upload your PDFs to Litrevu and ask what they say, with every answer linked to the passage it came from. Free to start, no credit card. Try Litrevu free ## How do you organize research papers by theme? You organize research papers by theme in a source matrix: a table with one row per paper and one column each for method, sample, key finding, theme and page number. The theme column is the one that matters, because clusters of papers that share a theme become the sections of your literature review. The method has a name in the health sciences, the Matrix Method, set out in Judith Garrard's Health Sciences Literature Review Made Easy (listed in the University of North Carolina's literature review guide ). Here is the format. These rows are a format illustration, not real studies: replace every bracket with what your own papers say. Source matrix template (format illustration, not real studies) Author and year Method Sample Key finding Theme Page (Author, Year) [Design, e.g. survey] [Who and how many] [One sentence, in your words] Theme A [p.] (Author, Year) [Design] [Who and how many] [One sentence] Theme A [p.] (Author, Year) [Design] [Who and how many] [One sentence] Theme B [p.] Fill in the theme column as you read, not afterwards. If eight papers end up tagged Theme A and five tagged Theme B, you already know two of the sections of your literature review. Write the page number for every finding; finding a quote's page again the night before a deadline is the job a source matrix saves you. You can build a source matrix in Google Sheets, Excel or a Word table. If you want a ready-made one, Make a literature review matrix from your own PDFs is Litrevu's free tool for the same table. To turn finished themes into chapter sections, see how to structure a literature review by theme , and to write across papers rather than one paper at a time, see how to synthesize sources in a literature review . The complete guide to writing a literature review covers the chapter from start to finish. ## How do you annotate papers so you can find things again? Annotate research papers with a fixed colour code and a one-line note on every highlight saying why the passage matters. A highlight shows what you noticed; the note shows why you noticed it and where the passage fits in your argument, which is the part you forget first. Steal this colour code, which works in any PDF reader: - Yellow: key findings and main arguments - Green: method details you might cite - Blue: definitions and theoretical frameworks - Red: limitations, contradictions or points you disagree with Notes can be short: “Good definition of resilience”, “Contradicts (Author, Year) on sample size”, “Use in the methods chapter”. If you read inside Zotero, Zotero's PDF reader lets you pick a highlight colour from a popup, and you can add annotations to a note by dragging them in or by building one note from every annotation in a PDF. Each annotation added to a note keeps a link back to its page in the PDF and a citation, so the note becomes a list of findings you can cite straight from. ## How do you keep a reference library up to date? Keep a reference library up to date by merging duplicates, watching for retracted papers and setting alerts for new work on your topic, roughly once a month during a thesis or dissertation. A library that is never cleaned fills up with duplicate entries, and a retracted paper cited in your literature review is a problem your examiner may spot before you do. - Merge duplicates. Zotero's duplicate detection compares title, DOI and ISBN, then publication year and author names, and lists likely pairs in a Duplicate Items collection. Merge rather than delete: Zotero says merges “retain all of the collections and tags of the merged items.” - Watch for retractions. Since Zotero 5.0.67 (June 2019), Zotero flags retracted papers using Retraction Watch data and warns you if you try to cite one. The check only covers items with a DOI or PMID, so fill in the DOI for every journal article. - Set alerts. In Google Scholar , run your search, click the envelope icon and choose “Create alert” to get newly published papers by email. Use “Cited by” and the same envelope icon on a key paper to hear about new papers that cite that key paper. Every paper an alert brings in goes through the same routine: rename, save to the reference manager, log in the source matrix. ## When do you have enough sources to stop collecting? You have enough sources when you are inside the range for your word count in this section's table and the last three papers you read added no new theme, method or finding to your source matrix. That second test, a rule of thumb rather than a university rule, tells you that you have reached saturation and that more searching is now procrastination. Sources to cite in a literature review, by dissertation or thesis length Dissertation or thesis Literature review length Sources to cite in the review 10,000-word undergraduate dissertation About 2,000 words 13–20 12,000-word honours thesis About 2,400 words 16–24 15,000-word master's dissertation or thesis About 3,000 words 20–30 20,000-word master's dissertation or thesis About 4,000 words 27–40 80,000-word PhD thesis About 9,600 words 64–96 The review lengths use the 15 to 25% of the word limit per chapter that the University of Hull's dissertation guide gives (about 20% in the table), and the University of Kent's “perhaps 8-10,000 words” for a PhD review. Source counts follow Litrevu's planning rule of one source per 100 to 150 words of review. The workings, and country-by-country figures, are in how long should a literature review be . Your handbook or supervisor overrides every number here. Start writing once you are in range. Writing shows you the gaps in your reading, and a targeted search to fill a named gap is faster than collecting another 20 papers in case. ## How do you organize research papers with an AI assistant for writing backed by sources? With an AI assistant for writing backed by sources, you add the papers you have already organized to one library, then ask the papers questions, compare the papers in a table and check your own paragraphs against them. Here is the workflow in Litrevu, using only the steps on the How it works page. - Add your papers. Upload the PDFs from your 04_Key_Studies folder, paste a PDF link, a DOI or an arXiv link, paste a paper's text, or pick open-access papers that Litrevu finds on your topic. - Ask the papers about your themes. Ask “Which of these papers measure [your outcome], and how?” Answers cite only your papers, and Litrevu says so when your papers do not cover a question. - Open the citation. Every citation opens the passage highlighted on its page of the PDF, with the paper's title, authors and year, so you can copy the page number into your source matrix. - Compare papers side by side. Line up the studies under one theme in a table with citations and see where the studies agree and where they differ. That table is a starting point for your source matrix, which you still check and own. - Check your paragraph. Paste a paragraph you wrote and each claim comes back Supported, Partly supported, Contradicted or Not in your papers. “Not in your papers” means your library does not cover that claim. “Not in your papers” is not proof of a gap in the wider literature. - Cite and export. Switch between APA, MLA, Chicago, IEEE, Harvard and Vancouver, and export your references to BibTeX or RIS for Zotero, Mendeley or EndNote. A claim check looks like this. The claim and citation are a format illustration, not real output: Your sentence: “[Your claim about Theme A].” Result: Supported, (Author, Year), passage highlighted on [p.]. You do the thinking. Litrevu finds, lines up and checks the evidence in your papers; you decide what the evidence means, build the argument and write every word. ## How does Litrevu compare with other research tools? Litrevu works on papers you have already chosen, while Elicit, Consensus, Scite and Research Rabbit are mostly built to help you find or evaluate papers. If you do not have your papers yet, Elicit, Consensus and Research Rabbit will get you there; Litrevu starts once your folder and reference manager are full. Litrevu, Elicit, Consensus, Scite and Research Rabbit compared Tool Best for Works from What you get Where it beats Litrevu Litrevu Asking questions of, comparing and checking papers you have already chosen PDFs you add, plus open-access papers you pick from its search Answers cited only from your papers, each citation opening its highlighted passage; comparison tables; a claim-by-claim check of your paragraph Not built for discovery at scale, systematic-review screening or showing whether later work supports a paper Elicit Finding papers; screening and data extraction for systematic reviews Its academic paper search, plus documents you upload Research reports and data extraction tables Discovery at scale, screening and structured data extraction Consensus Searching peer-reviewed research to answer a question Peer-reviewed literature Evidence answers drawn from published papers Answers questions across the published literature, not only your library Scite Seeing how later research treated a paper Citation statements from later papers Smart Citations showing whether later research supported, challenged or discussed a paper Tells you whether a source has been contested; Litrevu does not Research Rabbit Exploring outward from papers you like Papers you start from Related papers and citation maps Visual citation-map discovery Each row was checked against the vendor's own website in November 2026. These products change quickly, so check the current feature list before you choose. ## Frequently asked questions ## What is the best way to organize sources for a research paper? The best way to organize sources for a research paper is one project folder with PDFs named Author_Year_ShortTitle, one reference manager for every source, and a source matrix with a theme column. The reference manager handles citations, and the source matrix shows which papers support which section of the paper. ## How do I manage hundreds of PDF research papers? Manage hundreds of PDF research papers in a reference manager rather than in folders alone, because a reference manager searches every paper at once and keeps reference details with each PDF. Zotero gives 300 MB of free synced storage and Mendeley gives 2 GB, so a large library may need a paid storage plan or files kept on your own drive. Merge duplicates and fill in DOIs so retraction alerts work. ## Is Zotero better than Mendeley for students? Zotero suits most students better because Zotero is free and cites inside Microsoft Word, LibreOffice and Google Docs, while Mendeley Cite works in Microsoft Word. Mendeley offers more free storage, 2 GB against Zotero's 300 MB. If your research group already shares a Mendeley library, use Mendeley. ## What is a source matrix? A source matrix is a table with one row per source and columns for method, sample, key finding, theme and page number, used to see patterns across papers before writing a literature review. The approach is also called the Matrix Method, after Judith Garrard's book on health sciences literature reviews. You can build one in a spreadsheet or with Litrevu's free literature review matrix tool . ## How do I organize sources for an RRL? Organize sources for an RRL (review of related literature, the Philippine term for the literature review chapter) by splitting the source matrix into related literature and related studies. The Asia-Pacific Nazarene Theological Seminary's 2019 thesis handbook , for example, makes Chapter 2 the "Review of the Related Literature, Studies, and Works" and defines related studies as journal articles, theses and dissertations. Add a "literature or study" column to your source matrix, and follow your own school's format. ## Should I print research papers or keep them digital? Keep research papers digital once a project passes about 15 to 20 sources, because you cannot search, re-sort or cite a stack of printouts. Printing the five to eight papers your argument leans on most, for close reading, and keeping everything else in your reference manager works well for many students. ## Sources Organized? Now Ask Them Questions The hardest part of a literature review is not finding sources. It is seeing how 30 annotated PDFs fit together: which themes run through them, where they agree and where they disagree. That is what Litrevu is built to help with. Litrevu is an AI assistant for writing backed by sources. It reads every paper, report and PDF you add, answers your questions with a citation to the exact passage behind each claim, compares sources side by side, and checks your own draft against them. Upload your organized research papers and ask what they say. Litrevu maps the themes across your library, compares studies side by side, and links every point to the passage behind it. The synthesis and the writing stay yours. Free to start, no credit card required. Try Litrevu free ## Related Guides - Zotero vs Mendeley vs EndNote: Which Is Best for Students? - How to Turn Your Zotero Library Into a Literature Review (2026) - How to Structure a Literature Review by Theme (With Examples) - How to Find Academic Sources for a Research Paper ---